On Fri, 14 Oct 2022 15:11:47 +0100
Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx> wrote:
> On Fri, 14 Oct 2022 15:37:22 +0300
> Cosmin Tanislav <demonsingur@xxxxxxxxx> wrote:
>
> > From: Cosmin Tanislav <cosmin.tanislav@xxxxxxxxxx>
> >
> > Currently, every time the device wakes up from sleep, the
> > iio_chan array is reallocated, leaking the previous one
> > until the device is removed (basically never).
> >
> > Move the allocation to the probe function to avoid this.
> >
> > Signed-off-by: Cosmin Tanislav <cosmin.tanislav@xxxxxxxxxx>
> Hi Cosmin,
>
> Please give a fixes tag for this one as we'll definitely want to
> backport it.
>
> Reply to this patch is fine as b4 will pick it up like any other tag.
Fixes: f110f3188e563 ("iio: temperature: Add support for LTC2983")
(from direct mail)
>
> > ---
> > drivers/iio/temperature/ltc2983.c | 13 ++++++-------
> > 1 file changed, 6 insertions(+), 7 deletions(-)
> >
> > diff --git a/drivers/iio/temperature/ltc2983.c b/drivers/iio/temperature/ltc2983.c
> > index b652d2b39bcf..a60ccf183687 100644
> > --- a/drivers/iio/temperature/ltc2983.c
> > +++ b/drivers/iio/temperature/ltc2983.c
> > @@ -1385,13 +1385,6 @@ static int ltc2983_setup(struct ltc2983_data *st, bool assign_iio)
> > return ret;
> > }
> >
> > - st->iio_chan = devm_kzalloc(&st->spi->dev,
> > - st->iio_channels * sizeof(*st->iio_chan),
> > - GFP_KERNEL);
> > -
> > - if (!st->iio_chan)
> > - return -ENOMEM;
> > -
> > ret = regmap_update_bits(st->regmap, LTC2983_GLOBAL_CONFIG_REG,
> > LTC2983_NOTCH_FREQ_MASK,
> > LTC2983_NOTCH_FREQ(st->filter_notch_freq));
> > @@ -1514,6 +1507,12 @@ static int ltc2983_probe(struct spi_device *spi)
> > gpiod_set_value_cansleep(gpio, 0);
> > }
> >
> > + st->iio_chan = devm_kzalloc(&spi->dev,
> > + st->iio_channels * sizeof(*st->iio_chan),
> > + GFP_KERNEL);
> > + if (!st->iio_chan)
> > + return -ENOMEM;
> > +
> > ret = ltc2983_setup(st, true);
> > if (ret)
> > return ret;
>
>
