From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
.probe_new() doesn't get the i2c_device_id * parameter, so determine
that explicitly in the probe function.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
---
drivers/iio/temperature/tmp007.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/iio/temperature/tmp007.c b/drivers/iio/temperature/tmp007.c
index f3420d8a0e35..8d27aa3bdd6d 100644
--- a/drivers/iio/temperature/tmp007.c
+++ b/drivers/iio/temperature/tmp007.c
@@ -446,9 +446,9 @@ static void tmp007_powerdown_action_cb(void *priv)
tmp007_powerdown(data);
}
-static int tmp007_probe(struct i2c_client *client,
- const struct i2c_device_id *tmp007_id)
+static int tmp007_probe(struct i2c_client *client)
{
+ const struct i2c_device_id *tmp007_id = i2c_client_get_device_id(client);
struct tmp007_data *data;
struct iio_dev *indio_dev;
int ret;
@@ -574,7 +574,7 @@ static struct i2c_driver tmp007_driver = {
.of_match_table = tmp007_of_match,
.pm = pm_sleep_ptr(&tmp007_pm_ops),
},
- .probe = tmp007_probe,
+ .probe_new = tmp007_probe,
.id_table = tmp007_id,
};
module_i2c_driver(tmp007_driver);
--
2.38.1
