On Tue, 01 Nov 2022 07:48:03 +0100, Leonard Göhrs wrote: > Add binding documentation for the TI LMP92064 dual channel SPI ADC. > > Changes from v1 -> v2: > > - Rename the "shunt-resistor" devicetree property to > "shunt-resistor-micro-ohms". > - Add supply regulator support for the two voltage domains of the chip > (vdd and vdig). > - Add reference to spi-peripheral-props.yaml > > Signed-off-by: Leonard Göhrs <l.goehrs@xxxxxxxxxxxxxx> > --- > .../bindings/iio/adc/ti,lmp92064.yaml | 70 +++++++++++++++++++ > 1 file changed, 70 insertions(+) > create mode 100644 Documentation/devicetree/bindings/iio/adc/ti,lmp92064.yaml > My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check' on your patch (DT_CHECKER_FLAGS is new in v5.13): yamllint warnings/errors: dtschema/dtc warnings/errors: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/iio/adc/ti,lmp92064.example.dtb: adc@0: 'spi-max-frequency' does not match any of the regexes: 'pinctrl-[0-9]+' From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/iio/adc/ti,lmp92064.yaml doc reference errors (make refcheckdocs): See https://patchwork.ozlabs.org/patch/ This check can fail if there are any dependencies. The base for a patch series is generally the most recent rc1. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit.
