Hi all, This patch set adds support for the TI TMAG5273 Low-Power Linear 3D Hall- Effect Sensor. Additionally to temperature and magnetic X, Y and Z-axes the angle and magnitude are reported. The sensor is operating in continuous measurement mode and changes to sleep mode if not used for 5 seconds. Tests were done on a ROCK3 Model A board using the TMAG5273 evaluation module. Regards, Gerald Loacker Gerald Loacker (2): dt-bindings: iio: magnetometer: add ti tmag5273 documentation file iio: magnetometer: add ti tmag5273 driver .../iio/magnetometer/ti,tmag5273.yaml | 72 ++ MAINTAINERS | 7 + drivers/iio/magnetometer/Kconfig | 12 + drivers/iio/magnetometer/Makefile | 2 + drivers/iio/magnetometer/tmag5273.c | 809 ++++++++++++++++++ 5 files changed, 902 insertions(+) create mode 100644 .../bindings/iio/magnetometer/ti,tmag5273.yaml create mode 100644 drivers/iio/magnetometer/tmag5273.c -- 2.37.2
