On Wed, 02 Nov 2022 01:16:44 +0100
Angel Iglesias <ang.iglesiasg@xxxxxxxxx> wrote:
> On Tue, 2022-11-01 at 22:52 +0100, Uwe Kleine-König wrote:
> > Hello,
> >
> > On Sun, Oct 30, 2022 at 06:53:11PM +0100, Angel Iglesias wrote:
> > > Use i2c_client_get_device_id() to get the i2c_device_id* parameter in the
> > > .new_probe() callback.
> > >
> > > Signed-off-by: Angel Iglesias <ang.iglesiasg@xxxxxxxxx>
> > > ---
> > > drivers/iio/pressure/bmp280-i2c.c | 8 ++++----
> > > 1 file changed, 4 insertions(+), 4 deletions(-)
> > >
> > > diff --git a/drivers/iio/pressure/bmp280-i2c.c
> > > b/drivers/iio/pressure/bmp280-i2c.c
> > > index 0c27211f3ea0..20073b09b3e3 100644
> > > --- a/drivers/iio/pressure/bmp280-i2c.c
> > > +++ b/drivers/iio/pressure/bmp280-i2c.c
> > > @@ -5,11 +5,11 @@
> > >
> > > #include "bmp280.h"
> > >
> > > -static int bmp280_i2c_probe(struct i2c_client *client,
> > > - const struct i2c_device_id *id)
> > > +static int bmp280_i2c_probe(struct i2c_client *client)
> > > {
> > > - struct regmap *regmap;
> > > + const struct i2c_device_id *id = i2c_client_get_device_id(client);
> > > const struct regmap_config *regmap_config;
> > > + struct regmap *regmap;
> > >
> > > switch (id->driver_data) {
> > > case BMP180_CHIP_ID:
> >
> > What is the motivation for moving regmap? I thought reverse christmas
> > tree is only a thing in network code? I would have left the regmap
> > declaration where it is.
>
> Long story short, I worked previously on a small refactor of this driver to add
> support for a new family of sensors. During the different iterations of the
> patchset, one thing that was agreed was unifying the driver coding style to
> reverse xmas tree. For some extra context, here's the thread:
> https://lore.kernel.org/all/20220814145249.701f1261@jic23-huawei/
Not something I feel strongly enough about either way, but has benefit of
consistency. However, it's an unrelated change in this patch, so drop it
to avoid the noise in a patch where you have more significant changes.
Jonathan
>
> > > @@ -65,7 +65,7 @@ static struct i2c_driver bmp280_i2c_driver = {
> > > .of_match_table = bmp280_of_i2c_match,
> > > .pm = pm_ptr(&bmp280_dev_pm_ops),
> > > },
> > > - .probe = bmp280_i2c_probe,
> > > + .probe_new = bmp280_i2c_probe,
> > > .id_table = bmp280_i2c_id,
> > > };
> > > module_i2c_driver(bmp280_i2c_driver);
> >
> > Best regards
> > Uwe
> >
> Kind regards
> Angel
