Linux Kernel I²C Bus Layer

• Date Index

• Re: [PATCH v2] i2c: i801: Add lis3lv02d for Dell Precision M6800 v2 Bios: A26, (continued)
  • Re: [PATCH v2] i2c: i801: Add lis3lv02d for Dell Precision M6800 v2 Bios: A26, Patrick Höhn
• [PATCH] dt-bindings: i2c: Remove obsolete i2c.txt, Rob Herring
  • Re: [PATCH] dt-bindings: i2c: Remove obsolete i2c.txt, Mark Brown
  • Re: [PATCH] dt-bindings: i2c: Remove obsolete i2c.txt, Wolfram Sang
    • Re: [PATCH] dt-bindings: i2c: Remove obsolete i2c.txt, Rob Herring
      • Re: [PATCH] dt-bindings: i2c: Remove obsolete i2c.txt, Wolfram Sang
        • Re: [PATCH] dt-bindings: i2c: Remove obsolete i2c.txt, Rob Herring
  • Re: [PATCH] dt-bindings: i2c: Remove obsolete i2c.txt, Wolfram Sang
• [PATCH v3] i2c: imx: when being a target, mark the last read as processed, Wolfram Sang
  • Re: [PATCH v3] i2c: imx: when being a target, mark the last read as processed, Andi Shyti
    • Re: [PATCH v3] i2c: imx: when being a target, mark the last read as processed, Wolfram Sang
      • Re: [PATCH v3] i2c: imx: when being a target, mark the last read as processed, Oleksij Rempel
        • Re: [PATCH v3] i2c: imx: when being a target, mark the last read as processed, Wolfram Sang
  • Re: [PATCH v3] i2c: imx: when being a target, mark the last read as processed, Andi Shyti
• irq/51-DLL075B:01 in D state without touchpad usage, interrupts increase, Paul Menzel
  • Re: irq/51-DLL075B:01 in D state without touchpad usage, interrupts increase, Jarkko Nikula
    • Re: irq/51-DLL075B:01 in D state without touchpad usage, interrupts increase, Paul Menzel
      • Re: irq/51-DLL075B:01 in D state without touchpad usage, interrupts increase, Jarkko Nikula
        • Re: irq/51-DLL075B:01 in D state without touchpad usage, interrupts increase, Paul Menzel
• [PATCH] i2c: constify the struct device_type usage, Ricardo B. Marliere
  • Re: [PATCH] i2c: constify the struct device_type usage, Wolfram Sang
• [PATCH] Add lis3lv02d for Dell Precision M6800, Patrick Höhn
  • Re: [PATCH] Add lis3lv02d for Dell Precision M6800, Paul Menzel
• [PULL REQUEST] i2c-for-6.8-rc5, Wolfram Sang
  • Re: [PULL REQUEST] i2c-for-6.8-rc5, pr-tracker-bot
• [PATCH v5] hid-ft260: Add serial driver, Christina Quast
  • Re: [PATCH v5] hid-ft260: Add serial driver, Jiri Kosina
• [PATCH] i2c: remove redundant conditions, zoanana990
• [PATCH] i2c: aspeed: Fix the dummy irq expected print, Tommy Huang
  • Re: [PATCH] i2c: aspeed: Fix the dummy irq expected print, Andi Shyti
    • RE: [PATCH] i2c: aspeed: Fix the dummy irq expected print, Tommy Huang
      • Re: [PATCH] i2c: aspeed: Fix the dummy irq expected print, Andi Shyti
        • RE: [PATCH] i2c: aspeed: Fix the dummy irq expected print, Tommy Huang
          • Re: [PATCH] i2c: aspeed: Fix the dummy irq expected print, Wolfram Sang
            • RE: [PATCH] i2c: aspeed: Fix the dummy irq expected print, Tommy Huang
• [PATCH 00/33] fsi: Interrupt support, Eddie James
  • [PATCH 04/33] fsi: Improve master indexing, Eddie James
  • [PATCH 03/33] fsi: Move slave definitions to fsi-slave.h, Eddie James
  • [PATCH 01/33] dt-bindings: clock: ast2600: Add FSI clock, Eddie James
    • Re: [PATCH 01/33] dt-bindings: clock: ast2600: Add FSI clock, Krzysztof Kozlowski
    • Re: [PATCH 01/33] dt-bindings: clock: ast2600: Add FSI clock, Stephen Boyd
  • [PATCH 12/33] fsi: core: Allow cfam device type aliases, Eddie James
    • Re: [PATCH 12/33] fsi: core: Allow cfam device type aliases, Dan Carpenter
  • [PATCH 10/33] fsi: aspeed: Add AST2700 support, Eddie James
    • Re: [PATCH 10/33] fsi: aspeed: Add AST2700 support, Krzysztof Kozlowski
      • Re: [PATCH 10/33] fsi: aspeed: Add AST2700 support, Eddie James
  • [PATCH 09/33] fsi: core: Add slave error trace, Eddie James
  • [PATCH 18/33] fsi: aspeed: Don't clear all IRQs during OPB transfers, Eddie James
  • [PATCH 08/33] fsi: core: Improve master read/write/error traces, Eddie James
  • [PATCH 11/33] fsi: core: Add slave spinlock, Eddie James
  • [PATCH 21/33] fsi: aspeed: Disable relative addressing and IPOLL for cfam reset, Eddie James
  • [PATCH 19/33] fsi: aspeed: Only read result register for successful read, Eddie James
  • [PATCH 05/33] fsi: Use a defined value for default echo delay, Eddie James
  • [PATCH 17/33] fsi: aspeed: Refactor trace functions, Eddie James
  • [PATCH 26/33] ARM: dts: aspeed: FSI interrupt support, Eddie James
    • Re: [PATCH 26/33] ARM: dts: aspeed: FSI interrupt support, Krzysztof Kozlowski
  • [PATCH 20/33] fsi: aspeed: Switch to spinlock, Eddie James
  • [PATCH 16/33] fsi: aspeed: Remove cfam reset sysfs file in error path and remove, Eddie James
  • [PATCH 22/33] fsi: aspeed: Use common master error handler, Eddie James
  • [PATCH 23/33] fsi: core: Add interrupt support, Eddie James
  • [PATCH 32/33] i2c: fsi: Add boolean for skip stop command on abort, Eddie James
  • [PATCH 30/33] i2c: fsi: Remove list structure of ports, Eddie James
  • [PATCH 24/33] fsi: aspeed: Add interrupt support, Eddie James
  • [PATCH 31/33] i2c: fsi: Define a function to check status error bits, Eddie James
  • [PATCH 25/33] fsi: hub: Add interrupt support, Eddie James
  • [PATCH 29/33] i2c: fsi: Change fsi_i2c_write_reg to accept data instead of a pointer, Eddie James
  • [PATCH 28/33] i2c: fsi: Improve formatting, Eddie James
  • [PATCH 15/33] fsi: aspeed: Use common initialization and link enable, Eddie James
  • [PATCH 33/33] i2c: fsi: Add interrupt support, Eddie James
  • [PATCH 27/33] i2c: fsi: Calculate clock divider from local bus frequency, Eddie James
  • [PATCH 13/33] fsi: core: Add common regmap master functions, Eddie James
  • [PATCH 06/33] fsi: Expose master-specific local bus clock divider, Eddie James
  • [PATCH 02/33] clk: ast2600: Add FSI parent clock with correct rate, Eddie James
    • Re: [PATCH 02/33] clk: ast2600: Add FSI parent clock with correct rate, Stephen Boyd
  • [PATCH 14/33] fsi: hub: Use common initialization and link enable, Eddie James
  • [PATCH 07/33] ARM: dts: aspeed: p10 and tacoma: Set FSI clock frequency, Eddie James
    • Re: [PATCH 07/33] ARM: dts: aspeed: p10 and tacoma: Set FSI clock frequency, Krzysztof Kozlowski
      • Re: [PATCH 07/33] ARM: dts: aspeed: p10 and tacoma: Set FSI clock frequency, Eddie James
        • Re: [PATCH 07/33] ARM: dts: aspeed: p10 and tacoma: Set FSI clock frequency, Joel Stanley
• [GIT PULL] i2c-host fixes for v6.8-rc5, Andi Shyti
  • Re: [GIT PULL] i2c-host fixes for v6.8-rc5, Wolfram Sang
    • Re: [GIT PULL] i2c-host fixes for v6.8-rc5, Andi Shyti
• [PATCH 00/13] Add Mobileye EyeQ5 support to the Nomadik I2C controller & use hrtimers for timeouts, Théo Lebrun
  • [PATCH 01/13] dt-bindings: i2c: nomadik: add timeout-usecs property bindings, Théo Lebrun
    • Re: [PATCH 01/13] dt-bindings: i2c: nomadik: add timeout-usecs property bindings, Rob Herring
      • Re: [PATCH 01/13] dt-bindings: i2c: nomadik: add timeout-usecs property bindings, Théo Lebrun
        • Re: [PATCH 01/13] dt-bindings: i2c: nomadik: add timeout-usecs property bindings, Krzysztof Kozlowski
        • Re: [PATCH 01/13] dt-bindings: i2c: nomadik: add timeout-usecs property bindings, Linus Walleij
          • Re: [PATCH 01/13] dt-bindings: i2c: nomadik: add timeout-usecs property bindings, Théo Lebrun
            • Re: [PATCH 01/13] dt-bindings: i2c: nomadik: add timeout-usecs property bindings, Théo Lebrun
              • Re: [PATCH 01/13] dt-bindings: i2c: nomadik: add timeout-usecs property bindings, Wolfram Sang
                • Re: [PATCH 01/13] dt-bindings: i2c: nomadik: add timeout-usecs property bindings, Rob Herring
                  • Re: [PATCH 01/13] dt-bindings: i2c: nomadik: add timeout-usecs property bindings, Wolfram Sang
                    • Re: [PATCH 01/13] dt-bindings: i2c: nomadik: add timeout-usecs property bindings, Rob Herring
                      • Re: [PATCH 01/13] dt-bindings: i2c: nomadik: add timeout-usecs property bindings, Wolfram Sang
  • [PATCH 02/13] dt-bindings: i2c: nomadik: add mobileye,eyeq5-i2c bindings and example, Théo Lebrun
    • Re: [PATCH 02/13] dt-bindings: i2c: nomadik: add mobileye,eyeq5-i2c bindings and example, Rob Herring
    • Re: [PATCH 02/13] dt-bindings: i2c: nomadik: add mobileye,eyeq5-i2c bindings and example, Rob Herring
      • Re: [PATCH 02/13] dt-bindings: i2c: nomadik: add mobileye,eyeq5-i2c bindings and example, Théo Lebrun
        • Re: [PATCH 02/13] dt-bindings: i2c: nomadik: add mobileye,eyeq5-i2c bindings and example, Krzysztof Kozlowski
          • Re: [PATCH 02/13] dt-bindings: i2c: nomadik: add mobileye,eyeq5-i2c bindings and example, Théo Lebrun
            • Re: [PATCH 02/13] dt-bindings: i2c: nomadik: add mobileye,eyeq5-i2c bindings and example, Krzysztof Kozlowski
              • Re: [PATCH 02/13] dt-bindings: i2c: nomadik: add mobileye,eyeq5-i2c bindings and example, Théo Lebrun
                • Re: [PATCH 02/13] dt-bindings: i2c: nomadik: add mobileye,eyeq5-i2c bindings and example, Krzysztof Kozlowski
  • [PATCH 03/13] dt-bindings: hwmon: lm75: add label property, Théo Lebrun
    • Re: [PATCH 03/13] dt-bindings: hwmon: lm75: add label property, Krzysztof Kozlowski
      • Re: [PATCH 03/13] dt-bindings: hwmon: lm75: add label property, Krzysztof Kozlowski
        • Re: [PATCH 03/13] dt-bindings: hwmon: lm75: add label property, Théo Lebrun
    • Re: [PATCH 03/13] dt-bindings: hwmon: lm75: add label property, Guenter Roeck
      • Re: [PATCH 03/13] dt-bindings: hwmon: lm75: add label property, Krzysztof Kozlowski
  • [PATCH 05/13] i2c: nomadik: simplify IRQ masking logic, Théo Lebrun
    • Re: [PATCH 05/13] i2c: nomadik: simplify IRQ masking logic, Linus Walleij
  • [PATCH 04/13] i2c: nomadik: rename private struct pointers from dev to priv, Théo Lebrun
    • Re: [PATCH 04/13] i2c: nomadik: rename private struct pointers from dev to priv, Linus Walleij
  • [PATCH 06/13] i2c: nomadik: use bitops helpers, Théo Lebrun
    • Re: [PATCH 06/13] i2c: nomadik: use bitops helpers, Linus Walleij
  • [PATCH 07/13] i2c: nomadik: support short xfer timeouts using waitqueue & hrtimer, Théo Lebrun
    • Re: [PATCH 07/13] i2c: nomadik: support short xfer timeouts using waitqueue & hrtimer, Linus Walleij
      • Re: [PATCH 07/13] i2c: nomadik: support short xfer timeouts using waitqueue & hrtimer, Théo Lebrun
  • [PATCH 09/13] i2c: nomadik: fetch timeout-usecs property from devicetree, Théo Lebrun
    • Re: [PATCH 09/13] i2c: nomadik: fetch timeout-usecs property from devicetree, Linus Walleij
    • Re: [PATCH 09/13] i2c: nomadik: fetch timeout-usecs property from devicetree, Wolfram Sang
      • Re: [PATCH 09/13] i2c: nomadik: fetch timeout-usecs property from devicetree, Théo Lebrun
        • Re: [PATCH 09/13] i2c: nomadik: fetch timeout-usecs property from devicetree, Wolfram Sang
          • Re: [PATCH 09/13] i2c: nomadik: fetch timeout-usecs property from devicetree, Théo Lebrun
            • Re: [PATCH 09/13] i2c: nomadik: fetch timeout-usecs property from devicetree, Wolfram Sang
              • Re: [PATCH 09/13] i2c: nomadik: fetch timeout-usecs property from devicetree, Théo Lebrun
  • [PATCH 10/13] i2c: nomadik: support Mobileye EyeQ5 I2C controller, Théo Lebrun
    • Re: [PATCH 10/13] i2c: nomadik: support Mobileye EyeQ5 I2C controller, Linus Walleij
      • Re: [PATCH 10/13] i2c: nomadik: support Mobileye EyeQ5 I2C controller, Théo Lebrun
        • Re: [PATCH 10/13] i2c: nomadik: support Mobileye EyeQ5 I2C controller, Théo Lebrun
  • [PATCH 11/13] MIPS: mobileye: eyeq5: add 5 I2C controller nodes, Théo Lebrun
  • [PATCH 12/13] MIPS: mobileye: eyeq5: add evaluation board I2C temp sensor, Théo Lebrun
    • Re: [PATCH 12/13] MIPS: mobileye: eyeq5: add evaluation board I2C temp sensor, Krzysztof Kozlowski
  • [PATCH 13/13] MIPS: mobileye: eyeq5: add resets to I2C controllers, Théo Lebrun
    • Re: [PATCH 13/13] MIPS: mobileye: eyeq5: add resets to I2C controllers, Krzysztof Kozlowski
      • Re: [PATCH 13/13] MIPS: mobileye: eyeq5: add resets to I2C controllers, Théo Lebrun
        • Re: [PATCH 13/13] MIPS: mobileye: eyeq5: add resets to I2C controllers, Krzysztof Kozlowski
          • Re: [PATCH 13/13] MIPS: mobileye: eyeq5: add resets to I2C controllers, Théo Lebrun
  • [PATCH 08/13] i2c: nomadik: replace jiffies by ktime for FIFO flushing timeout, Théo Lebrun
    • Re: [PATCH 08/13] i2c: nomadik: replace jiffies by ktime for FIFO flushing timeout, Linus Walleij
      • Re: [PATCH 08/13] i2c: nomadik: replace jiffies by ktime for FIFO flushing timeout, Théo Lebrun
        • Re: [PATCH 08/13] i2c: nomadik: replace jiffies by ktime for FIFO flushing timeout, Linus Walleij
  • Re: [PATCH 00/13] Add Mobileye EyeQ5 support to the Nomadik I2C controller & use hrtimers for timeouts, Linus Walleij
    • Re: [PATCH 00/13] Add Mobileye EyeQ5 support to the Nomadik I2C controller & use hrtimers for timeouts, Théo Lebrun
• [PATCH v3 00/18] Add suspend to ram support for PCIe on J7200, Thomas Richard
  • [PATCH v3 02/18] pinctrl: pinctrl-single: remove dead code in suspend() and resume() callbacks, Thomas Richard
    • Re: [PATCH v3 02/18] pinctrl: pinctrl-single: remove dead code in suspend() and resume() callbacks, Andy Shevchenko
      • Re: [PATCH v3 02/18] pinctrl: pinctrl-single: remove dead code in suspend() and resume() callbacks, Thomas Richard
        • Re: [PATCH v3 02/18] pinctrl: pinctrl-single: remove dead code in suspend() and resume() callbacks, Andy Shevchenko
          • Re: [PATCH v3 02/18] pinctrl: pinctrl-single: remove dead code in suspend() and resume() callbacks, Thomas Richard
            • Re: [PATCH v3 02/18] pinctrl: pinctrl-single: remove dead code in suspend() and resume() callbacks, Andy Shevchenko
              • Re: [PATCH v3 02/18] pinctrl: pinctrl-single: remove dead code in suspend() and resume() callbacks, Thomas Richard
  • [PATCH v3 01/18] gpio: pca953x: move suspend()/resume() to suspend_noirq()/resume_noirq(), Thomas Richard
    • Re: [PATCH v3 01/18] gpio: pca953x: move suspend()/resume() to suspend_noirq()/resume_noirq(), Linus Walleij
  • [PATCH v3 04/18] i2c: omap: wakeup the controller during suspend() callback, Thomas Richard
    • Re: [PATCH v3 04/18] i2c: omap: wakeup the controller during suspend() callback, Andy Shevchenko
  • [PATCH v3 05/18] mux: add mux_chip_resume() function, Thomas Richard
    • Re: [PATCH v3 05/18] mux: add mux_chip_resume() function, Andy Shevchenko
      • Re: [PATCH v3 05/18] mux: add mux_chip_resume() function, Thomas Richard
        • Re: [PATCH v3 05/18] mux: add mux_chip_resume() function, Andy Shevchenko
          • Re: [PATCH v3 05/18] mux: add mux_chip_resume() function, Thomas Richard
  • [PATCH v3 06/18] mux: mmio: add resume support, Thomas Richard
  • [PATCH v3 03/18] pinctrl: pinctrl-single: move suspend()/resume() callbacks to noirq, Thomas Richard
  • [PATCH v3 08/18] phy: ti: phy-j721e-wiz: split wiz_clock_init() function, Thomas Richard
    • Re: [PATCH v3 08/18] phy: ti: phy-j721e-wiz: split wiz_clock_init() function, Andy Shevchenko
      • Re: [PATCH v3 08/18] phy: ti: phy-j721e-wiz: split wiz_clock_init() function, Vinod Koul
        • Re: [PATCH v3 08/18] phy: ti: phy-j721e-wiz: split wiz_clock_init() function, Siddharth Vadapalli
          • Re: [PATCH v3 08/18] phy: ti: phy-j721e-wiz: split wiz_clock_init() function, Andy Shevchenko
        • Re: [PATCH v3 08/18] phy: ti: phy-j721e-wiz: split wiz_clock_init() function, Andy Shevchenko
  • [PATCH v3 09/18] phy: ti: phy-j721e-wiz: add resume support, Thomas Richard
  • [PATCH v3 10/18] phy: cadence-torrent: extract calls to clk_get from cdns_torrent_clk, Thomas Richard
  • [PATCH v3 12/18] phy: cadence-torrent: add already_configured to struct cdns_torrent_phy, Thomas Richard
  • [PATCH v3 07/18] phy: ti: phy-j721e-wiz: use dev_err_probe() instead of dev_err(), Thomas Richard
    • Re: [PATCH v3 07/18] phy: ti: phy-j721e-wiz: use dev_err_probe() instead of dev_err(), Andy Shevchenko
  • [PATCH v3 15/18] PCI: cadence: extract link setup sequence from cdns_pcie_host_setup(), Thomas Richard
    • Re: [PATCH v3 15/18] PCI: cadence: extract link setup sequence from cdns_pcie_host_setup(), Siddharth Vadapalli
  • [PATCH v3 16/18] PCI: cadence: set cdns_pcie_host_init() global, Thomas Richard
    • Re: [PATCH v3 16/18] PCI: cadence: set cdns_pcie_host_init() global, Siddharth Vadapalli
  • [PATCH v3 17/18] PCI: j721e: add reset GPIO to struct j721e_pcie, Thomas Richard
    • Re: [PATCH v3 17/18] PCI: j721e: add reset GPIO to struct j721e_pcie, Andy Shevchenko
      • Re: [PATCH v3 17/18] PCI: j721e: add reset GPIO to struct j721e_pcie, Thomas Richard
        • Re: [PATCH v3 17/18] PCI: j721e: add reset GPIO to struct j721e_pcie, Andy Shevchenko
  • [PATCH v3 18/18] PCI: j721e: add suspend and resume support, Thomas Richard
    • Re: [PATCH v3 18/18] PCI: j721e: add suspend and resume support, Andy Shevchenko
    • Re: [PATCH v3 18/18] PCI: j721e: add suspend and resume support, Siddharth Vadapalli
      • Re: [PATCH v3 18/18] PCI: j721e: add suspend and resume support, Théo Lebrun
        • Re: [PATCH v3 18/18] PCI: j721e: add suspend and resume support, Siddharth Vadapalli
  • [PATCH v3 11/18] phy: cadence-torrent: register resets even if the phy is already configured, Thomas Richard
  • [PATCH v3 13/18] phy: cadence-torrent: remove noop_ops phy operations, Thomas Richard
    • Re: [PATCH v3 13/18] phy: cadence-torrent: remove noop_ops phy operations, Andy Shevchenko
  • [PATCH v3 14/18] phy: cadence-torrent: add suspend and resume support, Thomas Richard
    • Re: [PATCH v3 14/18] phy: cadence-torrent: add suspend and resume support, Andy Shevchenko
      • Re: [PATCH v3 14/18] phy: cadence-torrent: add suspend and resume support, Thomas Richard
    • Re: [PATCH v3 14/18] phy: cadence-torrent: add suspend and resume support, Philipp Zabel
      • Re: [PATCH v3 14/18] phy: cadence-torrent: add suspend and resume support, Thomas Richard
        • Re: [PATCH v3 14/18] phy: cadence-torrent: add suspend and resume support, Philipp Zabel
  • Re: [PATCH v3 00/18] Add suspend to ram support for PCIe on J7200, Philipp Stanner
  • Re: [PATCH v3 00/18] Add suspend to ram support for PCIe on J7200, Bjorn Helgaas
• [PATCH] i2c: i801: Fix block process call transactions, Jean Delvare
  • Re: [PATCH] i2c: i801: Fix block process call transactions, Alexander Sverdlin
  • Re: [SPAM] [PATCH] i2c: i801: Fix block process call transactions, Andi Shyti
    • Re: [SPAM] [PATCH] i2c: i801: Fix block process call transactions, Andi Shyti
    • Re: [SPAM] [PATCH] i2c: i801: Fix block process call transactions, Jean Delvare
  • <Possible follow-ups>
  • Re: [PATCH] i2c: i801: Fix block process call transactions, Zakowski, Piotr
    • Re: [PATCH] i2c: i801: Fix block process call transactions, Jean Delvare
• [PATCH v3 0/6] i2c: designware: Generic polling mode code, Jarkko Nikula
  • [PATCH v3 1/6] i2c: designware: Uniform initialization flow for polling mode, Jarkko Nikula
  • [PATCH v3 2/6] i2c: designware: Do not enable interrupts shortly in polling mode, Jarkko Nikula
  • [PATCH v3 4/6] i2c: designware: Move interrupt handling functions before i2c_dw_xfer(), Jarkko Nikula
  • [PATCH v3 3/6] i2c: designware: Use accessors to DW_IC_INTR_MASK register, Jarkko Nikula
  • [PATCH v3 5/6] i2c: designware: Fix RX FIFO depth define on Wangxun 10Gb NIC, Jarkko Nikula
  • [PATCH v3 6/6] i2c: designware: Implement generic polling mode code for Wangxun 10Gb NIC, Jarkko Nikula
  • RE: [PATCH v3 0/6] i2c: designware: Generic polling mode code, Jiawen Wu
    • Re: [PATCH v3 0/6] i2c: designware: Generic polling mode code, Jarkko Nikula
      • Re: [PATCH v3 0/6] i2c: designware: Generic polling mode code, 'Andy Shevchenko'
  • Re: [PATCH v3 0/6] i2c: designware: Generic polling mode code, Andi Shyti
• Re: Potential bug in SMBus kernel module, Jean Delvare
  • Re: Potential bug in SMBus kernel module, Alexander Sverdlin
  • Re: Potential bug in SMBus kernel module, Alexander Sverdlin
• [PATCH v4] i2c: i2c-qcom-geni: Correct I2C TRE sequence, Viken Dadhaniya
  • Re: [PATCH v4] i2c: i2c-qcom-geni: Correct I2C TRE sequence, Dmitry Baryshkov
  • Re: [PATCH v4] i2c: i2c-qcom-geni: Correct I2C TRE sequence, Andi Shyti
• [PATCH] i2c: pasemi: split driver into two separate modules, Arnd Bergmann
  • Re: [PATCH] i2c: pasemi: split driver into two separate modules, Sven Peter
  • Re: [PATCH] i2c: pasemi: split driver into two separate modules, Andi Shyti
• Re: `intel_lpss_pci_driver_init` takes 23.8 ms, Paul Menzel
  • Re: `intel_lpss_pci_driver_init` takes 23.8 ms, Andy Shevchenko
• [PATCH 0/3] i2c: i801: Avoid potential issue in i801_check_post and cosmetic improvements, Heiner Kallweit
  • [PATCH 1/3] i2c: i801: Cosmetic improvements, Heiner Kallweit
  • [PATCH 2/3] i2c: i801: Move i801_wait_intr and i801_wait_byte_done in the code, Heiner Kallweit
  • [PATCH 3/3] i2c: i801: Improve too small kill wait time in i801_check_post, Heiner Kallweit
• [PATCH] i2c: Remove redundant comparison in npcm_i2c_reg_slave, Rand Deeb
  • Re: [PATCH] i2c: Remove redundant comparison in npcm_i2c_reg_slave, Wolfram Sang
  • Re: [PATCH] i2c: Remove redundant comparison in npcm_i2c_reg_slave, Andi Shyti
• [PATCH v2 0/9] i2c: designware: Generic polling mode code, Jarkko Nikula
  • [PATCH v2 2/9] i2c: designware: Convert arbitration semaphore flag as semaphore type, Jarkko Nikula
  • [PATCH v2 3/9] i2c: designware: Convert shared_with_punit boolean as semaphore type, Jarkko Nikula
  • [PATCH v2 4/9] i2c: designware: Uniform initialization flow for polling mode, Jarkko Nikula
    • Re: [PATCH v2 4/9] i2c: designware: Uniform initialization flow for polling mode, Andy Shevchenko
  • [PATCH v2 6/9] i2c: designware: Use accessors to DW_IC_INTR_MASK register, Jarkko Nikula
  • [PATCH v2 5/9] i2c: designware: Do not enable interrupts shortly in polling mode, Jarkko Nikula
  • [PATCH v2 7/9] i2c: designware: Move interrupt handling functions before i2c_dw_xfer(), Jarkko Nikula
    • Re: [PATCH v2 7/9] i2c: designware: Move interrupt handling functions before i2c_dw_xfer(), Andy Shevchenko
  • [PATCH v2 8/9] i2c: designware: Fix RX FIFO depth define on Wangxun 10Gb NIC, Jarkko Nikula
  • [PATCH v2 9/9] i2c: designware: Implement generic polling mode code for Wangxun 10Gb NIC, Jarkko Nikula
    • Re: [PATCH v2 9/9] i2c: designware: Implement generic polling mode code for Wangxun 10Gb NIC, Andy Shevchenko
  • [PATCH v2 1/9] i2c: designware: Add some flexiblity to the model info, Jarkko Nikula
    • Re: [PATCH v2 1/9] i2c: designware: Add some flexiblity to the model info, Andy Shevchenko
      • Re: [PATCH v2 1/9] i2c: designware: Add some flexiblity to the model info, Jarkko Nikula
        • Re: [PATCH v2 1/9] i2c: designware: Add some flexiblity to the model info, Andy Shevchenko
• [PATCH v3 0/4] i2c: thunderx: Marvell thunderx i2c changes, Piyush Malgujar
  • [PATCH v3 1/4] i2c: thunderx: Clock divisor logic changes, Piyush Malgujar
    • Re: [PATCH v3 1/4] i2c: thunderx: Clock divisor logic changes, Andi Shyti
    • Re: [PATCH v3 1/4] i2c: thunderx: Clock divisor logic changes, Andi Shyti
  • [PATCH v3 2/4] i2c: thunderx: Add support for High speed mode, Piyush Malgujar
    • Re: [PATCH v3 2/4] i2c: thunderx: Add support for High speed mode, Andi Shyti
  • [PATCH v3 3/4] i2c: octeon: Handle watchdog timeout, Piyush Malgujar
    • Re: [PATCH v3 3/4] i2c: octeon: Handle watchdog timeout, Andi Shyti
  • [PATCH v3 4/4] i2c: thunderx: Adding ioclk support, Piyush Malgujar
    • Re: [PATCH v3 4/4] i2c: thunderx: Adding ioclk support, Andi Shyti
• [PULL REQUEST] i2c-for-6.8-rc3, Wolfram Sang
  • Re: [PULL REQUEST] i2c-for-6.8-rc3, pr-tracker-bot
• [REGRESSION] `lis3lv02d_i2c_suspend()` causes `unbalanced disables for regulator-dummy` and `Failed to disable Vdd_IO: -EIO`, Paul Menzel
  • Re: [REGRESSION] `lis3lv02d_i2c_suspend()` causes `unbalanced disables for regulator-dummy` and `Failed to disable Vdd_IO: -EIO`, Mark Brown
    • Re: [REGRESSION] `lis3lv02d_i2c_suspend()` causes `unbalanced disables for regulator-dummy` and `Failed to disable Vdd_IO: -EIO`, Linux regression tracking (Thorsten Leemhuis)
      • Re: [REGRESSION] `lis3lv02d_i2c_suspend()` causes `unbalanced disables for regulator-dummy` and `Failed to disable Vdd_IO: -EIO`, Hans de Goede
  • Re: [REGRESSION] `lis3lv02d_i2c_suspend()` causes `unbalanced disables for regulator-dummy` and `Failed to disable Vdd_IO: -EIO`, Hans de Goede
• [PATCH v3 0/5] i2c: i801: collection of further improvements / refactorings, Heiner Kallweit
  • [PATCH v3 2/5] i2c: i801: Add helper i801_check_and_clear_pec_error, Heiner Kallweit
  • [PATCH v3 1/5] i2c: i801: Define FEATURES_ICH5 as an extension of FEATURES_ICH4, Heiner Kallweit
  • [PATCH v3 3/5] i2c: i801: Split i801_block_transaction, Heiner Kallweit
    • Re: [PATCH v3 3/5] i2c: i801: Split i801_block_transaction, Andi Shyti
  • [PATCH v3 4/5] i2c: i801: Add SMBUS_LEN_SENTINEL, Heiner Kallweit
    • Re: [PATCH v3 4/5] i2c: i801: Add SMBUS_LEN_SENTINEL, Andi Shyti
  • [PATCH v3 5/5] i2c: i801: Add helper i801_get_block_len, Heiner Kallweit
    • Re: [PATCH v3 5/5] i2c: i801: Add helper i801_get_block_len, Andi Shyti
  • Re: [PATCH v3 0/5] i2c: i801: collection of further improvements / refactorings, Andi Shyti
• [PATCH v2 0/5] i2c: i801: collection of further improvements / refactorings, Heiner Kallweit
  • [PATCH v2 1/5] i2c: i801: Define FEATURES_ICH5 as an extension of FEATURES_ICH4, Heiner Kallweit
  • [PATCH v2 2/5] i2c: i801: Add helper i801_check_and_clear_pec_error, Heiner Kallweit
  • [PATCH v2 3/5] i2c: i801: Split i801_block_transaction, Heiner Kallweit
  • [PATCH v2 4/5] i2c: i801: Add SMBUS_LEN_SENTINEL, Heiner Kallweit
    • Re: [PATCH v2 4/5] i2c: i801: Add SMBUS_LEN_SENTINEL, Andy Shevchenko
      • Re: [PATCH v2 4/5] i2c: i801: Add SMBUS_LEN_SENTINEL, Heiner Kallweit
  • [PATCH v2 5/5] i2c: i801: Add helper i801_get_block_len, Heiner Kallweit
• [PATCH] dt-bindings: i2c: renesas,rcar-i2c: Add r8a779h0 support, Geert Uytterhoeven
  • Re: [PATCH] dt-bindings: i2c: renesas,rcar-i2c: Add r8a779h0 support, Conor Dooley
  • Re: [PATCH] dt-bindings: i2c: renesas,rcar-i2c: Add r8a779h0 support, Andi Shyti
  • Re: [PATCH] dt-bindings: i2c: renesas,rcar-i2c: Add r8a779h0 support, Andi Shyti
  • Re: [PATCH] dt-bindings: i2c: renesas,rcar-i2c: Add r8a779h0 support, Wolfram Sang
• [V3] i2c: i2c-qcom-geni: Correct I2C TRE sequence, Viken Dadhaniya
  • Re: [V3] i2c: i2c-qcom-geni: Correct I2C TRE sequence, Dmitry Baryshkov
    • Re: [V3] i2c: i2c-qcom-geni: Correct I2C TRE sequence, Viken Dadhaniya
      • Re: [V3] i2c: i2c-qcom-geni: Correct I2C TRE sequence, Andi Shyti
        • Re: [V3] i2c: i2c-qcom-geni: Correct I2C TRE sequence, Dmitry Baryshkov
          • Re: [V3] i2c: i2c-qcom-geni: Correct I2C TRE sequence, Andi Shyti
            • Re: [V3] i2c: i2c-qcom-geni: Correct I2C TRE sequence, Konrad Dybcio
              • Re: [V3] i2c: i2c-qcom-geni: Correct I2C TRE sequence, Viken Dadhaniya
          • Re: [V3] i2c: i2c-qcom-geni: Correct I2C TRE sequence, Viken Dadhaniya
  • Re: [V3] i2c: i2c-qcom-geni: Correct I2C TRE sequence, Andi Shyti
    • Re: [V3] i2c: i2c-qcom-geni: Correct I2C TRE sequence, Viken Dadhaniya
• [PATCH v2 0/2] i2c: hisi: Clear the interrupt status and optimize writing limitation, Devyn Liu
  • [PATCH v2 2/2] i2c: hisi: Add clearing tx aempty interrupt operation, Devyn Liu
    • Re: [PATCH v2 2/2] i2c: hisi: Add clearing tx aempty interrupt operation, Andi Shyti
  • [PATCH v2 1/2] i2c: hisi: Optimized the value setting of maxwrite limit to fifo depth - 1, Devyn Liu
    • Re: [PATCH v2 1/2] i2c: hisi: Optimized the value setting of maxwrite limit to fifo depth - 1, Andi Shyti
      • 答复: [PATCH v2 1/2] i2c: hisi: Optimized the value setting of maxwrite limit to fifo depth - 1, liudingyuan
  • Re: [PATCH v2 0/2] i2c: hisi: Clear the interrupt status and optimize writing limitation, Andi Shyti
    • 答复: [PATCH v2 0/2] i2c: hisi: Clear the interrupt status and optimize writing limitation, liudingyuan
  • Re: [PATCH v2 0/2] i2c: hisi: Clear the interrupt status and optimize writing limitation, Andi Shyti
• [PATCH 1/2] dt-bindings: i2c: designware: allow fine tuning tuning waveform from device tree, Aahil Awatramani
  • [PATCH 2/2] i2c: designware: allow fine tuning tuning waveform from device tree, Aahil Awatramani
    • Re: [PATCH 2/2] i2c: designware: allow fine tuning tuning waveform from device tree, Krzysztof Kozlowski
  • Re: [PATCH 1/2] dt-bindings: i2c: designware: allow fine tuning tuning waveform from device tree, Krzysztof Kozlowski
  • Re: [PATCH 1/2] dt-bindings: i2c: designware: allow fine tuning tuning waveform from device tree, Andy Shevchenko
    • Re: [PATCH 1/2] dt-bindings: i2c: designware: allow fine tuning tuning waveform from device tree, Aahil Awatramani
• [PATCH v2] i2c: sh_mobile: Switch R-Mobile A1/APE6 and SH-Mobile AG5 to new frequency calculation, Geert Uytterhoeven
  • Re: [PATCH v2] i2c: sh_mobile: Switch R-Mobile A1/APE6 and SH-Mobile AG5 to new frequency calculation, Wolfram Sang
  • Re: [PATCH v2] i2c: sh_mobile: Switch R-Mobile A1/APE6 and SH-Mobile AG5 to new frequency calculation, Andi Shyti
• [GIT PULL] i2c-host changes for v6.8-rc3, Andi Shyti
• [PATCH 0/6] i2c: designware: Generic polling mode code, Jarkko Nikula
  • [PATCH 1/6] i2c: designware: Uniform initialization flow for polling mode, Jarkko Nikula
    • Re: [PATCH 1/6] i2c: designware: Uniform initialization flow for polling mode, Andy Shevchenko
      • Re: [PATCH 1/6] i2c: designware: Uniform initialization flow for polling mode, Andi Shyti
  • [PATCH 3/6] i2c: designware: Use accessors to DW_IC_INTR_MASK register, Jarkko Nikula
  • [PATCH 2/6] i2c: designware: Do not enable interrupts shortly in polling mode, Jarkko Nikula
  • [PATCH 4/6] i2c: designware: Move interrupt handling functions before i2c_dw_xfer(), Jarkko Nikula
  • [PATCH 5/6] i2c: designware: Fix RX FIFO depth define on Wangxun 10Gb NIC, Jarkko Nikula
    • Re: [PATCH 5/6] i2c: designware: Fix RX FIFO depth define on Wangxun 10Gb NIC, Andy Shevchenko
      • Re: [PATCH 5/6] i2c: designware: Fix RX FIFO depth define on Wangxun 10Gb NIC, Jarkko Nikula
  • [PATCH 5/5] i2c: designware: Implement generic polling mode code for Wangxun 10Gb NIC, Jarkko Nikula
    • Re: [PATCH 5/5] i2c: designware: Implement generic polling mode code for Wangxun 10Gb NIC, Andy Shevchenko
    • Re: [PATCH 5/5] i2c: designware: Implement generic polling mode code for Wangxun 10Gb NIC, Jarkko Nikula
  • [PATCH 6/6] i2c: designware: Implement generic polling mode code for Wangxun 10Gb NIC, Jarkko Nikula
  • Re: [PATCH 0/6] i2c: designware: Generic polling mode code, Andy Shevchenko
    • Re: [PATCH 0/6] i2c: designware: Generic polling mode code, Jarkko Nikula
  • RE: [PATCH 0/6] i2c: designware: Generic polling mode code, Jiawen Wu
    • Re: [PATCH 0/6] i2c: designware: Generic polling mode code, Jarkko Nikula
• [PATCH v2] hwmon: Add driver for MPS MPQ8785 Synchronous Step-Down Converter, Charles Hsu
  • Re: [PATCH v2] hwmon: Add driver for MPS MPQ8785 Synchronous Step-Down Converter, Guenter Roeck
  • Re: [PATCH v2] hwmon: Add driver for MPS MPQ8785 Synchronous Step-Down Converter, Guenter Roeck
  • Re: [PATCH v2] hwmon: Add driver for MPS MPQ8785 Synchronous Step-Down Converter, Rob Herring
• [V2] i2c: i2c-qcom-geni: Correct I2C TRE sequence, Viken Dadhaniya
  • Re: [V2] i2c: i2c-qcom-geni: Correct I2C TRE sequence, Andi Shyti
    • Re: [V2] i2c: i2c-qcom-geni: Correct I2C TRE sequence, Bryan O'Donoghue
    • Re: [V2] i2c: i2c-qcom-geni: Correct I2C TRE sequence, Viken Dadhaniya
  • Re: [V2] i2c: i2c-qcom-geni: Correct I2C TRE sequence, Dmitry Baryshkov
    • Re: [V2] i2c: i2c-qcom-geni: Correct I2C TRE sequence, Andi Shyti
      • Re: [V2] i2c: i2c-qcom-geni: Correct I2C TRE sequence, Viken Dadhaniya
    • Re: [V2] i2c: i2c-qcom-geni: Correct I2C TRE sequence, Viken Dadhaniya
  • Re: [V2] i2c: i2c-qcom-geni: Correct I2C TRE sequence, Bryan O'Donoghue
    • Re: [V2] i2c: i2c-qcom-geni: Correct I2C TRE sequence, Viken Dadhaniya
• [PATCH AUTOSEL 6.1 27/27] i2c: rk3x: Adjust mask/value offset for i2c2 on rv1126, Sasha Levin
  • Re: [PATCH AUTOSEL 6.1 27/27] i2c: rk3x: Adjust mask/value offset for i2c2 on rv1126, Tim Lunn
    • Re: [PATCH AUTOSEL 6.1 27/27] i2c: rk3x: Adjust mask/value offset for i2c2 on rv1126, Sasha Levin
• [PATCH AUTOSEL 6.6 31/31] i2c: rk3x: Adjust mask/value offset for i2c2 on rv1126, Sasha Levin
• [PATCH AUTOSEL 6.7 39/39] i2c: rk3x: Adjust mask/value offset for i2c2 on rv1126, Sasha Levin
• [PATCH] Input: bma150: remove I2C_CLASS_HWMON from drivers w/o detect and address_list, Heiner Kallweit
  • Re: [PATCH] Input: bma150: remove I2C_CLASS_HWMON from drivers w/o detect and address_list, Wolfram Sang
  • Re: [PATCH] Input: bma150: remove I2C_CLASS_HWMON from drivers w/o detect and address_list, Heiner Kallweit
• [PATCH] ipmi: ipmb: Remove I2C_CLASS_HWMON from drivers w/o detect and address_list, Heiner Kallweit
  • Re: [PATCH] ipmi: ipmb: Remove I2C_CLASS_HWMON from drivers w/o detect and address_list, Wolfram Sang
  • Re: [PATCH] ipmi: ipmb: Remove I2C_CLASS_HWMON from drivers w/o detect and address_list, Heiner Kallweit
• [PATCH net-next] mlxsw: remove I2C_CLASS_HWMON from drivers w/o detect and address_list, Heiner Kallweit
  • Re: [PATCH net-next] mlxsw: remove I2C_CLASS_HWMON from drivers w/o detect and address_list, Ido Schimmel
  • Re: [PATCH net-next] mlxsw: remove I2C_CLASS_HWMON from drivers w/o detect and address_list, patchwork-bot+netdevbpf
• [PATCH] media: ddbridge: Remove unused class-based I2C autoprobing code, Heiner Kallweit
  • Re: [PATCH] media: ddbridge: Remove unused class-based I2C autoprobing code, Wolfram Sang
• [PATCH v2 00/15] Add suspend to ram support for PCIe on J7200, Thomas Richard
  • [PATCH v2 02/15] pinctrl: pinctrl-single: move suspend()/resume() callbacks to noirq, Thomas Richard
    • Re: [PATCH v2 02/15] pinctrl: pinctrl-single: move suspend()/resume() callbacks to noirq, Andy Shevchenko
    • Re: [PATCH v2 02/15] pinctrl: pinctrl-single: move suspend()/resume() callbacks to noirq, Andi Shyti
    • Re: [PATCH v2 02/15] pinctrl: pinctrl-single: move suspend()/resume() callbacks to noirq, Linus Walleij
      • Re: [PATCH v2 02/15] pinctrl: pinctrl-single: move suspend()/resume() callbacks to noirq, Andi Shyti
        • Re: [PATCH v2 02/15] pinctrl: pinctrl-single: move suspend()/resume() callbacks to noirq, Tony Lindgren
        • Re: [PATCH v2 02/15] pinctrl: pinctrl-single: move suspend()/resume() callbacks to noirq, Thomas Richard
  • [PATCH v2 01/15] gpio: pca953x: move suspend()/resume() to suspend_noirq()/resume_noirq(), Thomas Richard
    • Re: [PATCH v2 01/15] gpio: pca953x: move suspend()/resume() to suspend_noirq()/resume_noirq(), Andy Shevchenko
    • Re: [PATCH v2 01/15] gpio: pca953x: move suspend()/resume() to suspend_noirq()/resume_noirq(), Bartosz Golaszewski
    • Re: [PATCH v2 01/15] gpio: pca953x: move suspend()/resume() to suspend_noirq()/resume_noirq(), Andi Shyti
    • Re: [PATCH v2 01/15] gpio: pca953x: move suspend()/resume() to suspend_noirq()/resume_noirq(), Tony Lindgren
  • [PATCH v2 03/15] i2c: omap: wakeup the controller during suspend() callback, Thomas Richard
    • Re: [PATCH v2 03/15] i2c: omap: wakeup the controller during suspend() callback, Andi Shyti
  • [PATCH v2 04/15] mux: add mux_chip_resume() function, Thomas Richard
    • Re: [PATCH v2 04/15] mux: add mux_chip_resume() function, Andy Shevchenko
      • Re: [PATCH v2 04/15] mux: add mux_chip_resume() function, Thomas Richard
    • Re: [PATCH v2 04/15] mux: add mux_chip_resume() function, Andi Shyti
    • Re: [PATCH v2 04/15] mux: add mux_chip_resume() function, Peter Rosin
      • Re: [PATCH v2 04/15] mux: add mux_chip_resume() function, Thomas Richard
  • [PATCH v2 05/15] mux: mmio: add resume support, Thomas Richard
    • Re: [PATCH v2 05/15] mux: mmio: add resume support, Andy Shevchenko
  • [PATCH v2 06/15] phy: ti: phy-j721e-wiz: make wiz_clock_init callable multiple times, Thomas Richard
    • Re: [PATCH v2 06/15] phy: ti: phy-j721e-wiz: make wiz_clock_init callable multiple times, Andy Shevchenko
    • Re: [PATCH v2 06/15] phy: ti: phy-j721e-wiz: make wiz_clock_init callable multiple times, Andi Shyti
  • [PATCH v2 07/15] phy: ti: phy-j721e-wiz: add resume support, Thomas Richard
    • Re: [PATCH v2 07/15] phy: ti: phy-j721e-wiz: add resume support, Andy Shevchenko
  • [PATCH v2 08/15] phy: cadence-torrent: extract calls to clk_get from cdns_torrent_clk, Thomas Richard
    • Re: [PATCH v2 08/15] phy: cadence-torrent: extract calls to clk_get from cdns_torrent_clk, Andy Shevchenko
  • [PATCH v2 09/15] phy: cadence-torrent: register resets even if the phy is already configured, Thomas Richard
    • Re: [PATCH v2 09/15] phy: cadence-torrent: register resets even if the phy is already configured, Andy Shevchenko
  • [PATCH v2 10/15] phy: cadence-torrent: add already_configured to struct cdns_torrent_phy, Thomas Richard
  • [PATCH v2 11/15] phy: cadence-torrent: remove noop_ops phy operations, Thomas Richard
  • [PATCH v2 12/15] phy: cadence-torrent: add suspend and resume support, Thomas Richard
    • Re: [PATCH v2 12/15] phy: cadence-torrent: add suspend and resume support, Andy Shevchenko
  • [PATCH v2 13/15] PCI: cadence: add resume support to cdns_pcie_host_setup(), Thomas Richard
    • Re: [PATCH v2 13/15] PCI: cadence: add resume support to cdns_pcie_host_setup(), Bjorn Helgaas
      • Re: [PATCH v2 13/15] PCI: cadence: add resume support to cdns_pcie_host_setup(), Andy Shevchenko
      • Re: [PATCH v2 13/15] PCI: cadence: add resume support to cdns_pcie_host_setup(), Bjorn Helgaas
        • Re: [PATCH v2 13/15] PCI: cadence: add resume support to cdns_pcie_host_setup(), Bjorn Helgaas
  • [PATCH v2 14/15] PCI: j721e: add reset GPIO to struct j721e_pcie, Thomas Richard
    • Re: [PATCH v2 14/15] PCI: j721e: add reset GPIO to struct j721e_pcie, Andy Shevchenko
  • [PATCH v2 15/15] PCI: j721e: add suspend and resume support, Thomas Richard
    • Re: [PATCH v2 15/15] PCI: j721e: add suspend and resume support, Andy Shevchenko
• [PATCH v1] hwmon: Add driver for MPS MPQ8785 Synchronous Step-Down Converter, Charles Hsu
  • Re: [PATCH v1] hwmon: Add driver for MPS MPQ8785 Synchronous Step-Down Converter, Guenter Roeck
    • Re: [PATCH v1] hwmon: Add driver for MPS MPQ8785 Synchronous Step-Down Converter, Guenter Roeck
• [PATCH] i2c: imx: move to generic GPIO recovery, Esben Haabendal
  • Re: [PATCH] i2c: imx: move to generic GPIO recovery, Oleksij Rempel
    • Re: [PATCH] i2c: imx: move to generic GPIO recovery, Esben Haabendal
      • Re: [PATCH] i2c: imx: move to generic GPIO recovery, Oleksij Rempel
  • Re: [PATCH] i2c: imx: move to generic GPIO recovery, Andi Shyti
• [PATCH] MAINTAINERS: Update i2c host drivers repository, Andi Shyti
  • Re: [PATCH] MAINTAINERS: Update i2c host drivers repository, Wolfram Sang
• [PATCH 1/2] dt-bindings: i2c: mux: i2c-demux-pinctrl: Drop i2c-mux.yaml reference, Rob Herring
  • [PATCH 2/2] dt-bindings: i2c: mux: i2c-demux-pinctrl: Define "i2c-parent" constraints, Rob Herring
    • Re: [PATCH 2/2] dt-bindings: i2c: mux: i2c-demux-pinctrl: Define "i2c-parent" constraints, Wolfram Sang
  • Re: [PATCH 1/2] dt-bindings: i2c: mux: i2c-demux-pinctrl: Drop i2c-mux.yaml reference, Wolfram Sang
    • Re: [PATCH 1/2] dt-bindings: i2c: mux: i2c-demux-pinctrl: Drop i2c-mux.yaml reference, Wolfram Sang
      • Re: [PATCH 1/2] dt-bindings: i2c: mux: i2c-demux-pinctrl: Drop i2c-mux.yaml reference, Rob Herring
        • Re: [PATCH 1/2] dt-bindings: i2c: mux: i2c-demux-pinctrl: Drop i2c-mux.yaml reference, Andi Shyti
          • Re: [PATCH 1/2] dt-bindings: i2c: mux: i2c-demux-pinctrl: Drop i2c-mux.yaml reference, Andi Shyti
• [PATCH]i2c: hisi: Clear the interrupt status and optimize writing limitation, Devyn Liu
  • [PATCH 1/2] i2c: hisi: Optimized the value setting of maxwrite limit to fifo depth - 1, Devyn Liu
    • Re: [PATCH 1/2] i2c: hisi: Optimized the value setting of maxwrite limit to fifo depth - 1, Yicong Yang
  • [PATCH 2/2] i2c: hisi: Add clearing tx aempty interrupt operation, Devyn Liu
    • Re: [PATCH 2/2] i2c: hisi: Add clearing tx aempty interrupt operation, Yicong Yang
  • Re: [PATCH]i2c: hisi: Clear the interrupt status and optimize writing limitation, Andi Shyti
    • Re: [PATCH]i2c: hisi: Clear the interrupt status and optimize writing limitation, Yicong Yang
      • Re: [PATCH]i2c: hisi: Clear the interrupt status and optimize writing limitation, Andi Shyti
• [PATCH] MAINTAINERS: Drop my "+dt" sub-address, Rob Herring
  • Re: [PATCH] MAINTAINERS: Drop my "+dt" sub-address, Wolfram Sang
• Re: Dell XPS 13 9360: DMAR errors `DRHD: handling fault status reg 2` and `[INTR-REMAP] Request device [f0:1f.0] fault index 0x0`, Paul Menzel
  • Re: Dell XPS 13 9360: DMAR errors `DRHD: handling fault status reg 2` and `[INTR-REMAP] Request device [f0:1f.0] fault index 0x0`, Christian A. Ehrhardt
• [PATCH] dt-bindings: i2c: imx-lpi2c: add i.MX95 LPI2C, Peng Fan (OSS)
  • Re: [PATCH] dt-bindings: i2c: imx-lpi2c: add i.MX95 LPI2C, Conor Dooley
• [PATCH v1 1/2] i2c: designware: constify abort_sources, Raag Jadav
  • [PATCH v1 2/2] i2c: designware: constify regmap_config, Raag Jadav
    • Re: [PATCH v1 2/2] i2c: designware: constify regmap_config, Jarkko Nikula
      • Re: [PATCH v1 2/2] i2c: designware: constify regmap_config, Raag Jadav
        • Re: [PATCH v1 2/2] i2c: designware: constify regmap_config, Raag Jadav
  • Re: [PATCH v1 1/2] i2c: designware: constify abort_sources, Andi Shyti
    • Re: [PATCH v1 1/2] i2c: designware: constify abort_sources, Raag Jadav
• [PATCH v4 0/8] GS101 Oriole: CMU_PERIC0 support and USI updates, Tudor Ambarus
  • [PATCH v4 1/8] dt-bindings: clock: google,gs101-clock: add PERIC0 clock management unit, Tudor Ambarus
    • Re: (subset) [PATCH v4 1/8] dt-bindings: clock: google,gs101-clock: add PERIC0 clock management unit, Krzysztof Kozlowski
  • [PATCH v4 2/8] dt-bindings: i2c: exynos5: add google,gs101-hsi2c compatible, Tudor Ambarus
    • Re: (subset) [PATCH v4 2/8] dt-bindings: i2c: exynos5: add google,gs101-hsi2c compatible, Krzysztof Kozlowski
  • [PATCH v4 4/8] arm64: dts: exynos: gs101: remove reg-io-width from serial, Tudor Ambarus
    • Re: (subset) [PATCH v4 4/8] arm64: dts: exynos: gs101: remove reg-io-width from serial, Krzysztof Kozlowski
  • [PATCH v4 3/8] clk: samsung: gs101: add support for cmu_peric0, Tudor Ambarus
    • Re: [PATCH v4 3/8] clk: samsung: gs101: add support for cmu_peric0, Krzysztof Kozlowski
      • Re: [PATCH v4 3/8] clk: samsung: gs101: add support for cmu_peric0, Tudor Ambarus
  • [PATCH v4 5/8] arm64: dts: exynos: gs101: enable cmu-peric0 clock controller, Tudor Ambarus
    • Re: (subset) [PATCH v4 5/8] arm64: dts: exynos: gs101: enable cmu-peric0 clock controller, Krzysztof Kozlowski
  • [PATCH v4 6/8] arm64: dts: exynos: gs101: update USI UART to use peric0 clocks, Tudor Ambarus
    • Re: (subset) [PATCH v4 6/8] arm64: dts: exynos: gs101: update USI UART to use peric0 clocks, Krzysztof Kozlowski
    • Re: [PATCH v4 6/8] arm64: dts: exynos: gs101: update USI UART to use peric0 clocks, Krzysztof Kozlowski
    • Re: (subset) [PATCH v4 6/8] arm64: dts: exynos: gs101: update USI UART to use peric0 clocks, Krzysztof Kozlowski
  • [PATCH v4 7/8] arm64: dts: exynos: gs101: define USI8 with I2C configuration, Tudor Ambarus
    • Re: (subset) [PATCH v4 7/8] arm64: dts: exynos: gs101: define USI8 with I2C configuration, Krzysztof Kozlowski
    • Re: [PATCH v4 7/8] arm64: dts: exynos: gs101: define USI8 with I2C configuration, Krzysztof Kozlowski
      • Re: [PATCH v4 7/8] arm64: dts: exynos: gs101: define USI8 with I2C configuration, Tudor Ambarus
        • Re: [PATCH v4 7/8] arm64: dts: exynos: gs101: define USI8 with I2C configuration, Krzysztof Kozlowski
          • Re: [PATCH v4 7/8] arm64: dts: exynos: gs101: define USI8 with I2C configuration, Tudor Ambarus
            • Re: [PATCH v4 7/8] arm64: dts: exynos: gs101: define USI8 with I2C configuration, Tudor Ambarus
              • Re: [PATCH v4 7/8] arm64: dts: exynos: gs101: define USI8 with I2C configuration, Krzysztof Kozlowski
                • Re: [PATCH v4 7/8] arm64: dts: exynos: gs101: define USI8 with I2C configuration, Tudor Ambarus
    • Re: (subset) [PATCH v4 7/8] arm64: dts: exynos: gs101: define USI8 with I2C configuration, Krzysztof Kozlowski
  • [PATCH v4 8/8] arm64: dts: exynos: gs101: enable eeprom on gs101-oriole, Tudor Ambarus
    • Re: (subset) [PATCH v4 8/8] arm64: dts: exynos: gs101: enable eeprom on gs101-oriole, Krzysztof Kozlowski
    • Re: (subset) [PATCH v4 8/8] arm64: dts: exynos: gs101: enable eeprom on gs101-oriole, Krzysztof Kozlowski
• [PATCH v2 1/1] i2c: lpi2c: Avoid calling clk_get_rate during transfer, Alexander Stein
  • Re: [PATCH v2 1/1] i2c: lpi2c: Avoid calling clk_get_rate during transfer, Uwe Kleine-König
• [PATCH v2 RESEND] i2c: cadence: Add system suspend and resume PM support, Ji Sheng Teoh
  • Re: [PATCH v2 RESEND] i2c: cadence: Add system suspend and resume PM support, Andi Shyti
    • RE: [PATCH v2 RESEND] i2c: cadence: Add system suspend and resume PM support, JiSheng Teoh
      • Re: [PATCH v2 RESEND] i2c: cadence: Add system suspend and resume PM support, Andi Shyti
        • RE: [PATCH v2 RESEND] i2c: cadence: Add system suspend and resume PM support, JiSheng Teoh
          • Re: [PATCH v2 RESEND] i2c: cadence: Add system suspend and resume PM support, Andi Shyti
            • RE: [PATCH v2 RESEND] i2c: cadence: Add system suspend and resume PM support, JiSheng Teoh
  • Re: [PATCH v2 RESEND] i2c: cadence: Add system suspend and resume PM support, Andi Shyti
• [PULL REQUEST] i2c-for-6.8-rc1-rebased, Wolfram Sang
  • Re: [PULL REQUEST] i2c-for-6.8-rc1-rebased, pr-tracker-bot
• [PATCH 1/1] i2c: lpi2c: Avoid calling clk_get_rate during transfer, Alexander Stein
  • Re: [PATCH 1/1] i2c: lpi2c: Avoid calling clk_get_rate during transfer, Uwe Kleine-König
    • Re: [PATCH 1/1] i2c: lpi2c: Avoid calling clk_get_rate during transfer, Alexander Stein
      • Re: [PATCH 1/1] i2c: lpi2c: Avoid calling clk_get_rate during transfer, Uwe Kleine-König
    • Re: [PATCH 1/1] i2c: lpi2c: Avoid calling clk_get_rate during transfer, Andi Shyti
• [PULL REQUEST] i2c-for-6.8-rc1-fixed, Wolfram Sang
  • Re: [PULL REQUEST] i2c-for-6.8-rc1-fixed, Kim Phillips
  • Re: [PULL REQUEST] i2c-for-6.8-rc1-fixed, Linus Torvalds
    • Re: [PULL REQUEST] i2c-for-6.8-rc1-fixed, Wolfram Sang
• [PULL REQUEST] i2c-for-6.8-rc1, Wolfram Sang
  • Re: [PULL REQUEST] i2c-for-6.8-rc1, Kim Phillips
    • Re: [PULL REQUEST] i2c-for-6.8-rc1, Wolfram Sang
• [PATCH 00/14] Add suspend to ram support for PCIe on J7200, Thomas Richard
  • [PATCH 05/14] phy: ti: phy-j721e-wiz: make wiz_clock_init callable multiple times, Thomas Richard
    • Re: [PATCH 05/14] phy: ti: phy-j721e-wiz: make wiz_clock_init callable multiple times, Vinod Koul
      • Re: [PATCH 05/14] phy: ti: phy-j721e-wiz: make wiz_clock_init callable multiple times, Thomas Richard
        • Re: [PATCH 05/14] phy: ti: phy-j721e-wiz: make wiz_clock_init callable multiple times, Vinod Koul
  • [PATCH 01/14] gpio: pca953x: move suspend/resume to suspend_noirq/resume_noirq, Thomas Richard
    • Re: [PATCH 01/14] gpio: pca953x: move suspend/resume to suspend_noirq/resume_noirq, Andy Shevchenko
      • Re: [PATCH 01/14] gpio: pca953x: move suspend/resume to suspend_noirq/resume_noirq, Thomas Richard
    • Re: [PATCH 01/14] gpio: pca953x: move suspend/resume to suspend_noirq/resume_noirq, Tony Lindgren
      • Re: [PATCH 01/14] gpio: pca953x: move suspend/resume to suspend_noirq/resume_noirq, Thomas Richard
        • Re: [PATCH 01/14] gpio: pca953x: move suspend/resume to suspend_noirq/resume_noirq, Linus Walleij
          • Re: [PATCH 01/14] gpio: pca953x: move suspend/resume to suspend_noirq/resume_noirq, Thomas Richard
            • Re: [PATCH 01/14] gpio: pca953x: move suspend/resume to suspend_noirq/resume_noirq, Bartosz Golaszewski
            • Re: [PATCH 01/14] gpio: pca953x: move suspend/resume to suspend_noirq/resume_noirq, Linus Walleij
              • Re: [PATCH 01/14] gpio: pca953x: move suspend/resume to suspend_noirq/resume_noirq, Thomas Richard
                • Re: [PATCH 01/14] gpio: pca953x: move suspend/resume to suspend_noirq/resume_noirq, Linus Walleij
  • [PATCH 06/14] phy: ti: phy-j721e-wiz: add resume support, Thomas Richard
  • [PATCH 02/14] pinctrl: pinctrl-single: move suspend/resume to suspend_noirq/resume_noirq, Thomas Richard
    • Re: [PATCH 02/14] pinctrl: pinctrl-single: move suspend/resume to suspend_noirq/resume_noirq, Andy Shevchenko
      • Re: [PATCH 02/14] pinctrl: pinctrl-single: move suspend/resume to suspend_noirq/resume_noirq, Thomas Richard
        • Re: [PATCH 02/14] pinctrl: pinctrl-single: move suspend/resume to suspend_noirq/resume_noirq, Andy Shevchenko
          • Re: [PATCH 02/14] pinctrl: pinctrl-single: move suspend/resume to suspend_noirq/resume_noirq, Thomas Richard
            • Re: [PATCH 02/14] pinctrl: pinctrl-single: move suspend/resume to suspend_noirq/resume_noirq, Andy Shevchenko
    • Re: [PATCH 02/14] pinctrl: pinctrl-single: move suspend/resume to suspend_noirq/resume_noirq, Linus Walleij
  • [PATCH 07/14] phy: cadence-torrent: extract calls to clk_get from cdns_torrent_clk, Thomas Richard
  • [PATCH 08/14] phy: cadence-torrent: register resets even if the phy is already configured, Thomas Richard
  • [PATCH 03/14] i2c: omap: wakeup the controller during suspend callback, Thomas Richard
    • Re: [PATCH 03/14] i2c: omap: wakeup the controller during suspend callback, Andy Shevchenko
  • [PATCH 04/14] mux: mmio: Add resume support, Thomas Richard
    • Re: [PATCH 04/14] mux: mmio: Add resume support, Andy Shevchenko
    • Re: [PATCH 04/14] mux: mmio: Add resume support, Peter Rosin
      • Re: [PATCH 04/14] mux: mmio: Add resume support, Thomas Richard
  • [PATCH 09/14] phy: cadence-torrent: move already_configured to struct cdns_torrent_phy, Thomas Richard
  • [PATCH 10/14] phy: cadence-torrent: remove noop_ops phy operations, Thomas Richard
  • [PATCH 11/14] phy: cadence-torrent: add suspend and resume support, Thomas Richard
    • Re: [PATCH 11/14] phy: cadence-torrent: add suspend and resume support, Bjorn Helgaas
      • Re: [PATCH 11/14] phy: cadence-torrent: add suspend and resume support, Thomas Richard
    • Re: [PATCH 11/14] phy: cadence-torrent: add suspend and resume support, Philipp Zabel
      • Re: [PATCH 11/14] phy: cadence-torrent: add suspend and resume support, Thomas Richard
  • [PATCH 12/14] PCI: cadence: add resume support to cdns_pcie_host_setup(), Thomas Richard
  • [PATCH 13/14] PCI: j721e: move reset GPIO to device struct, Thomas Richard
    • Re: [PATCH 13/14] PCI: j721e: move reset GPIO to device struct, Andy Shevchenko
    • Re: [PATCH 13/14] PCI: j721e: move reset GPIO to device struct, Bjorn Helgaas
  • [PATCH 14/14] PCI: j721e: add suspend and resume support, Thomas Richard
    • Re: [PATCH 14/14] PCI: j721e: add suspend and resume support, Andy Shevchenko
      • Re: [PATCH 14/14] PCI: j721e: add suspend and resume support, Thomas Richard
        • Re: [PATCH 14/14] PCI: j721e: add suspend and resume support, Andy Shevchenko
          • Re: [PATCH 14/14] PCI: j721e: add suspend and resume support, Thomas Richard
• [PATCH/RFC] i2c: sh_mobile: Switch R-Mobile A1/APE6 and SH-Mobile AG5 to new frequency calculation, Geert Uytterhoeven
  • Re: [PATCH/RFC] i2c: sh_mobile: Switch R-Mobile A1/APE6 and SH-Mobile AG5 to new frequency calculation, Wolfram Sang
• [PATCH] MAINTAINERS: use proper email for my I2C work, Wolfram Sang
  • Re: [PATCH] MAINTAINERS: use proper email for my I2C work, Wolfram Sang
• [PATCH v2 0/4] i2c: Support i2c_register_spd() on multiplexed bus segments, Heiner Kallweit
  • [PATCH v2 1/4] i2c: smbus: Prepare i2c_register_spd for usage on muxed segments, Heiner Kallweit
  • [PATCH v2 2/4] i2c: mux: add basic support for calling i2c_register_spd on muxed bus segments, Heiner Kallweit
  • [PATCH v2 3/4] i2c: mux: gpio: Allow to call i2c_register_spd on a muxed segment, Heiner Kallweit
  • [PATCH v2 4/4] i2c: i801: Call i2c_register_spd() on muxed bus segments, Heiner Kallweit
  • Re: [PATCH v2 0/4] i2c: Support i2c_register_spd() on multiplexed bus segments, Heiner Kallweit
  • Re: [PATCH v2 0/4] i2c: Support i2c_register_spd() on multiplexed bus segments, Wolfram Sang
    • Re: [PATCH v2 0/4] i2c: Support i2c_register_spd() on multiplexed bus segments, Heiner Kallweit
    • Re: [PATCH v2 0/4] i2c: Support i2c_register_spd() on multiplexed bus segments, Heiner Kallweit
• [PATCH v3 0/5] reset: gpio: ASoC: shared GPIO resets, Krzysztof Kozlowski
  • [PATCH v3 1/5] reset: gpio: Add GPIO-based reset controller, Krzysztof Kozlowski
    • Re: [PATCH v3 1/5] reset: gpio: Add GPIO-based reset controller, Bartosz Golaszewski
  • [PATCH v3 2/5] reset: Instantiate reset GPIO controller for shared reset-gpios, Krzysztof Kozlowski
    • Re: [PATCH v3 2/5] reset: Instantiate reset GPIO controller for shared reset-gpios, Bartosz Golaszewski
      • Re: [PATCH v3 2/5] reset: Instantiate reset GPIO controller for shared reset-gpios, Krzysztof Kozlowski
        • Re: [PATCH v3 2/5] reset: Instantiate reset GPIO controller for shared reset-gpios, Philipp Zabel
          • Re: [PATCH v3 2/5] reset: Instantiate reset GPIO controller for shared reset-gpios, Krzysztof Kozlowski
    • Re: [PATCH v3 2/5] reset: Instantiate reset GPIO controller for shared reset-gpios, Philipp Zabel
      • Re: [PATCH v3 2/5] reset: Instantiate reset GPIO controller for shared reset-gpios, Krzysztof Kozlowski
    • Re: [PATCH v3 2/5] reset: Instantiate reset GPIO controller for shared reset-gpios, Philipp Zabel
      • Re: [PATCH v3 2/5] reset: Instantiate reset GPIO controller for shared reset-gpios, Krzysztof Kozlowski
  • [PATCH v3 3/5] ASoC: dt-bindings: qcom,wsa8840: Add reset-gpios for shared line, Krzysztof Kozlowski
    • Re: [PATCH v3 3/5] ASoC: dt-bindings: qcom,wsa8840: Add reset-gpios for shared line, Rob Herring
  • [PATCH v3 4/5] ASoC: codecs: wsa884x: Allow sharing reset GPIO, Krzysztof Kozlowski
  • [PATCH v3 5/5] i2c: muxes: pca954x: Allow sharing reset GPIO, Krzysztof Kozlowski
    • Re: [PATCH v3 5/5] i2c: muxes: pca954x: Allow sharing reset GPIO, Philipp Zabel
      • Re: [PATCH v3 5/5] i2c: muxes: pca954x: Allow sharing reset GPIO, Chris Packham
        • Re: [PATCH v3 5/5] i2c: muxes: pca954x: Allow sharing reset GPIO, Philipp Zabel
          • Re: [PATCH v3 5/5] i2c: muxes: pca954x: Allow sharing reset GPIO, Chris Packham
• [PATCH 1/1] i2c: i2c-qcom-geni: Correct I2C TRE sequence, Viken Dadhaniya
  • Re: [PATCH 1/1] i2c: i2c-qcom-geni: Correct I2C TRE sequence, Bryan O'Donoghue
    • RE: [PATCH 1/1] i2c: i2c-qcom-geni: Correct I2C TRE sequence, Viken Dadhaniya
• [PATCH] i2c: designware: Revert recent changes to i2c_dw_probe_lock_support(), Jarkko Nikula
  • Re: [PATCH] i2c: designware: Revert recent changes to i2c_dw_probe_lock_support(), Kim Phillips
    • Re: [PATCH] i2c: designware: Revert recent changes to i2c_dw_probe_lock_support(), Jarkko Nikula
      • Re: [PATCH] i2c: designware: Revert recent changes to i2c_dw_probe_lock_support(), Wolfram Sang
        • Re: [PATCH] i2c: designware: Revert recent changes to i2c_dw_probe_lock_support(), Andy Shevchenko
          • Re: [PATCH] i2c: designware: Revert recent changes to i2c_dw_probe_lock_support(), Jarkko Nikula
      • Re: [PATCH] i2c: designware: Revert recent changes to i2c_dw_probe_lock_support(), Kim Phillips
        • Re: [PATCH] i2c: designware: Revert recent changes to i2c_dw_probe_lock_support(), Kim Phillips
          • Re: [PATCH] i2c: designware: Revert recent changes to i2c_dw_probe_lock_support(), Jarkko Nikula
• [PATCH 0/4] i2c: Support i2c_register_spd() on multiplexed bus segments, Heiner Kallweit
  • [PATCH 1/4] i2c: smbus: Prepare i2c_register_spd for usage on muxed segments, Heiner Kallweit
    • Re: [PATCH 1/4] i2c: smbus: Prepare i2c_register_spd for usage on muxed segments, Peter Rosin
      • Re: [PATCH 1/4] i2c: smbus: Prepare i2c_register_spd for usage on muxed segments, Heiner Kallweit
  • [PATCH 2/4] i2c: mux: add basic support for calling i2c_register_spd on muxed bus segments, Heiner Kallweit
    • Re: [PATCH 2/4] i2c: mux: add basic support for calling i2c_register_spd on muxed bus segments, kernel test robot
    • Re: [PATCH 2/4] i2c: mux: add basic support for calling i2c_register_spd on muxed bus segments, kernel test robot
  • [PATCH 4/4] i2c: i801: Call i2c_register_spd() on muxed bus segments, Heiner Kallweit
  • [PATCH 3/4] i2c: mux: gpio: Allow to call i2c_register_spd on a muxed segment, Heiner Kallweit
• [PATCH v8 1/1] i2c: lpi2c: use clk notifier for rate changes, Alexander Stein
  • Re: [PATCH v8 1/1] i2c: lpi2c: use clk notifier for rate changes, Uwe Kleine-König
    • Re: [PATCH v8 1/1] i2c: lpi2c: use clk notifier for rate changes, Alexander Stein
      • Re: [PATCH v8 1/1] i2c: lpi2c: use clk notifier for rate changes, Uwe Kleine-König
• [PATCH] i2c: Fix NULL pointer dereference in npcm_i2c_reg_slave, Rand Deeb
  • Re: [PATCH] i2c: Fix NULL pointer dereference in npcm_i2c_reg_slave, Tali Perry
    • Re: Re: [lvc-project] [PATCH] i2c: Fix NULL pointer dereference in npcm_i2c_reg_slave, Fedor Pchelkin
      • Re: Re: [lvc-project] [PATCH] i2c: Fix NULL pointer dereference in npcm_i2c_reg_slave, Wolfram Sang
        • Re: Re: Re: [lvc-project] [PATCH] i2c: Fix NULL pointer dereference in npcm_i2c_reg_slave, Fedor Pchelkin
          • Re: Re: Re: [lvc-project] [PATCH] i2c: Fix NULL pointer dereference in npcm_i2c_reg_slave, Rand Deeb
• [PATCH v3 00/12] GS101 Oriole: CMU_PERIC0 support and USI updates, Tudor Ambarus
  • [PATCH v3 01/12] dt-bindings: clock: google,gs101-clock: add PERIC0 clock management unit, Tudor Ambarus
    • Re: [PATCH v3 01/12] dt-bindings: clock: google,gs101-clock: add PERIC0 clock management unit, Rob Herring
  • [PATCH v3 03/12] dt-bindings: serial: samsung: do not allow reg-io-width for gs101, Tudor Ambarus
    • Re: [PATCH v3 03/12] dt-bindings: serial: samsung: do not allow reg-io-width for gs101, Krzysztof Kozlowski
      • Re: [PATCH v3 03/12] dt-bindings: serial: samsung: do not allow reg-io-width for gs101, Tudor Ambarus
    • Re: [PATCH v3 03/12] dt-bindings: serial: samsung: do not allow reg-io-width for gs101, Sam Protsenko
  • [PATCH v3 02/12] dt-bindings: i2c: exynos5: add google,gs101-hsi2c compatible, Tudor Ambarus
    • Re: [PATCH v3 02/12] dt-bindings: i2c: exynos5: add google,gs101-hsi2c compatible, Krzysztof Kozlowski
  • [PATCH v3 04/12] tty: serial: samsung: prepare for different IO types, Tudor Ambarus
    • Re: [PATCH v3 04/12] tty: serial: samsung: prepare for different IO types, Krzysztof Kozlowski
    • Re: [PATCH v3 04/12] tty: serial: samsung: prepare for different IO types, Sam Protsenko
  • [PATCH v3 05/12] tty: serial: samsung: set UPIO_MEM32 iotype for gs101, Tudor Ambarus
    • Re: [PATCH v3 05/12] tty: serial: samsung: set UPIO_MEM32 iotype for gs101, Krzysztof Kozlowski
    • Re: [PATCH v3 05/12] tty: serial: samsung: set UPIO_MEM32 iotype for gs101, Sam Protsenko
  • [PATCH v3 06/12] tty: serial: samsung: add gs101 earlycon support, Tudor Ambarus
    • Re: [PATCH v3 06/12] tty: serial: samsung: add gs101 earlycon support, Krzysztof Kozlowski
    • Re: [PATCH v3 06/12] tty: serial: samsung: add gs101 earlycon support, Sam Protsenko
  • [PATCH v3 07/12] clk: samsung: gs101: add support for cmu_peric0, Tudor Ambarus
    • Re: [PATCH v3 07/12] clk: samsung: gs101: add support for cmu_peric0, Sam Protsenko
      • Re: [PATCH v3 07/12] clk: samsung: gs101: add support for cmu_peric0, Tudor Ambarus
        • Re: [PATCH v3 07/12] clk: samsung: gs101: add support for cmu_peric0, Sam Protsenko
  • [PATCH v3 08/12] arm64: dts: exynos: gs101: remove reg-io-width from serial, Tudor Ambarus
    • Re: [PATCH v3 08/12] arm64: dts: exynos: gs101: remove reg-io-width from serial, Sam Protsenko
      • Re: [PATCH v3 08/12] arm64: dts: exynos: gs101: remove reg-io-width from serial, Tudor Ambarus
  • [PATCH v3 09/12] arm64: dts: exynos: gs101: enable cmu-peric0 clock controller, Tudor Ambarus
  • [PATCH v3 10/12] arm64: dts: exynos: gs101: update USI UART to use peric0 clocks, Tudor Ambarus
    • Re: [PATCH v3 10/12] arm64: dts: exynos: gs101: update USI UART to use peric0 clocks, Sam Protsenko
  • [PATCH v3 11/12] arm64: dts: exynos: gs101: define USI8 with I2C configuration, Tudor Ambarus
    • Re: [PATCH v3 11/12] arm64: dts: exynos: gs101: define USI8 with I2C configuration, Sam Protsenko
      • Re: [PATCH v3 11/12] arm64: dts: exynos: gs101: define USI8 with I2C configuration, Tudor Ambarus
        • Re: [PATCH v3 11/12] arm64: dts: exynos: gs101: define USI8 with I2C configuration, Sam Protsenko
  • [PATCH v3 12/12] arm64: dts: exynos: gs101: enable eeprom on gs101-oriole, Tudor Ambarus
• [PATCH] i2c: rcar: Prepare for the advent of ARCH_RCAR_GEN4, Geert Uytterhoeven
  • Re: [PATCH] i2c: rcar: Prepare for the advent of ARCH_RCAR_GEN4, Wolfram Sang
    • Re: [PATCH] i2c: rcar: Prepare for the advent of ARCH_RCAR_GEN4, Wolfram Sang
      • Re: [PATCH] i2c: rcar: Prepare for the advent of ARCH_RCAR_GEN4, Geert Uytterhoeven
  • Re: [PATCH] i2c: rcar: Prepare for the advent of ARCH_RCAR_GEN4, Andi Shyti
• [PATCH v6 0/2] platform/x86: p2sb: Fix deadlock at sysfs PCI bus rescan, Shin'ichiro Kawasaki
  • [PATCH v6 1/2] platform/x86: p2sb: Allow p2sb_bar() calls during PCI device probe, Shin'ichiro Kawasaki
  • [PATCH v6 2/2] platform/x86: p2sb: Use pci_resource_n() in p2sb_read_bar0(), Shin'ichiro Kawasaki
  • Re: [PATCH v6 0/2] platform/x86: p2sb: Fix deadlock at sysfs PCI bus rescan, Klara Modin
  • Re: [PATCH v6 0/2] platform/x86: p2sb: Fix deadlock at sysfs PCI bus rescan, Hans de Goede
• [PATCH] i2c: muxes: pca954x: Allow sharing reset GPIO, Chris Packham
  • Re: [PATCH] i2c: muxes: pca954x: Allow sharing reset GPIO, Krzysztof Kozlowski
  • Re: [PATCH] i2c: muxes: pca954x: Allow sharing reset GPIO, Peter Rosin
  • <Possible follow-ups>
  • [PATCH] i2c: muxes: pca954x: Allow sharing reset GPIO, Chris Packham
    • Re: [PATCH] i2c: muxes: pca954x: Allow sharing reset GPIO, Krzysztof Kozlowski