The driver finishs a write cycle by read the fifo tx full status
or write limit decrease to 0. The driver starts to write data to
the FIFO after the I2C FIFO almost empty interrupt is reported.
The threshold for FIFO almost empty interrupt is that the amount
of data in the FIFO is less than or equal to 1.
Reduce write maxwrite to the fifo depth - aempty interrupt
threshold. Limiting the number of data to be written at a time
to remaining fifo capacity.
Signed-off-by: Devyn Liu <liudingyuan@xxxxxxxxxx>
---
drivers/i2c/busses/i2c-hisi.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/i2c/busses/i2c-hisi.c b/drivers/i2c/busses/i2c-hisi.c
index dfad5bad5075..cd37053362ee 100644
--- a/drivers/i2c/busses/i2c-hisi.c
+++ b/drivers/i2c/busses/i2c-hisi.c
@@ -266,7 +266,7 @@ static int hisi_i2c_read_rx_fifo(struct hisi_i2c_controller *ctlr)
static void hisi_i2c_xfer_msg(struct hisi_i2c_controller *ctlr)
{
- int max_write = HISI_I2C_TX_FIFO_DEPTH;
+ int max_write = HISI_I2C_TX_FIFO_DEPTH - HISI_I2C_TX_F_AE_THRESH;
bool need_restart = false, last_msg;
struct i2c_msg *cur_msg;
u32 cmd, fifo_state;
--
2.30.0
