Dear Linux folks,
On a Dell XPS 13 9360 with Debian sid/unstable and Linux 6.8-rc4+ (and
probably before), I sometimes notice the fan spinning up, and trying to
figure out why, I noticed that `top` showed `irq/51-DLL075B:01` in state
D (uninterruptible sleep (usually IO)). That is without using the
touchpad. I am using an external USB keyboard and an external USB mouse.
$ sudo dmesg | grep -e "DMI:" -e "Linux version" -e microcode
[ 0.000000] Linux version 6.8.0-rc4+
(build@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx) (gcc (Debian 13.2.0-13) 13.2.0,
GNU ld (GNU Binutils for Debian) 2.42) #25 SMP PREEMPT_DYNAMIC Sat Feb
17 05:39:03 CET 2024
[ 0.000000] DMI: Dell Inc. XPS 13 9360/0596KF, BIOS 2.21.0
06/02/2022
[ 0.367292] microcode: Current revision: 0x000000f4
[ 0.367293] microcode: Updated early from: 0x000000f0
$ sudo dmesg | grep DLL075B
[ 0.967975] input: DLL075B:01 06CB:76AF Mouse as
/devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-2/i2c-DLL075B:01/0018:06CB:76AF.0001/input/input2
[ 0.968302] input: DLL075B:01 06CB:76AF Touchpad as
/devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-2/i2c-DLL075B:01/0018:06CB:76AF.0001/input/input3
[ 0.968569] hid-generic 0018:06CB:76AF.0001: input,hidraw0: I2C
HID v1.00 Mouse [DLL075B:01 06CB:76AF] on i2c-DLL075B:01
[ 19.753775] input: DLL075B:01 06CB:76AF Mouse as
/devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-2/i2c-DLL075B:01/0018:06CB:76AF.0001/input/input17
[ 19.753950] input: DLL075B:01 06CB:76AF Touchpad as
/devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-2/i2c-DLL075B:01/0018:06CB:76AF.0001/input/input18
[ 19.754654] hid-multitouch 0018:06CB:76AF.0001: input,hidraw0:
I2C HID v1.00 Mouse [DLL075B:01 06CB:76AF] on i2c-DLL075B:01
From `top`:
206 root -51 0 0 0 0 D 1,7 0,0 8:45.46
irq/51-DLL075B:01
$ ps aux | grep 'irq/51'
root 206 0.2 0.0 0 0 ? D Feb17 12:11
[irq/51-DLL075B:01]
The interrupts increase though by around 610 per second (without using
the device):
$ for i in $(seq 1 10); do LANG= date; sudo grep -e '17:' -e '51:'
/proc/interrupts; sleep 1; done
Tue Feb 20 17:04:23 CET 2024
17: 1631256120 0 0 6452384 IR-IO-APIC
17-fasteoi idma64.1, i2c_designware.1
51: 25255617 109943 0 0 IR-IO-APIC
51-fasteoi DLL075B:01
Tue Feb 20 17:04:27 CET 2024
17: 1631295844 0 0 6452384 IR-IO-APIC
17-fasteoi idma64.1, i2c_designware.1
51: 25256229 109943 0 0 IR-IO-APIC
51-fasteoi DLL075B:01
Tue Feb 20 17:04:28 CET 2024
17: 1631335618 0 0 6452384 IR-IO-APIC
17-fasteoi idma64.1, i2c_designware.1
51: 25256843 109943 0 0 IR-IO-APIC
51-fasteoi DLL075B:01
Tue Feb 20 17:04:29 CET 2024
17: 1631375224 0 0 6452384 IR-IO-APIC
17-fasteoi idma64.1, i2c_designware.1
51: 25257454 109943 0 0 IR-IO-APIC
51-fasteoi DLL075B:01
Tue Feb 20 17:04:30 CET 2024
17: 1631415636 0 0 6452384 IR-IO-APIC
17-fasteoi idma64.1, i2c_designware.1
51: 25258076 109943 0 0 IR-IO-APIC
51-fasteoi DLL075B:01
Tue Feb 20 17:04:31 CET 2024
17: 1631455174 0 0 6452384 IR-IO-APIC
17-fasteoi idma64.1, i2c_designware.1
51: 25258687 109943 0 0 IR-IO-APIC
51-fasteoi DLL075B:01
Tue Feb 20 17:04:32 CET 2024
17: 1631494990 0 0 6452384 IR-IO-APIC
17-fasteoi idma64.1, i2c_designware.1
51: 25259300 109943 0 0 IR-IO-APIC
51-fasteoi DLL075B:01
Tue Feb 20 17:04:33 CET 2024
17: 1631534944 0 0 6452384 IR-IO-APIC
17-fasteoi idma64.1, i2c_designware.1
51: 25259915 109943 0 0 IR-IO-APIC
51-fasteoi DLL075B:01
Tue Feb 20 17:04:34 CET 2024
17: 1631574647 0 0 6452384 IR-IO-APIC
17-fasteoi idma64.1, i2c_designware.1
51: 25260527 109943 0 0 IR-IO-APIC
51-fasteoi DLL075B:01
Tue Feb 20 17:04:35 CET 2024
17: 1631613552 0 0 6452384 IR-IO-APIC
17-fasteoi idma64.1, i2c_designware.1
51: 25261130 109943 0 0 IR-IO-APIC
51-fasteoi DLL075B:01
The D state increases the load average.
Is that the expected behavior?
Kind regards,
Paul
[ 0.000000] Linux version 6.8.0-rc4+ (build@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx) (gcc (Debian 13.2.0-13) 13.2.0, GNU ld (GNU Binutils for Debian) 2.42) #25 SMP PREEMPT_DYNAMIC Sat Feb 17 05:39:03 CET 2024
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-6.8.0-rc4+ root=UUID=32e29882-d94d-4a92-9ee4-4d03002bfa29 ro quiet pci=noaer mem_sleep_default=deep log_buf_len=8M cryptomgr.notests usbcore.dyndbg=+p
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009dfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009e000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000556aafff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000556ab000-0x00000000556abfff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000556ac000-0x00000000556acfff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000556ad000-0x0000000064df3fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000064df4000-0x000000006517ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000065180000-0x00000000651c3fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000651c4000-0x000000006f871fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000006f872000-0x000000006fffefff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000006ffff000-0x000000006fffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000070000000-0x0000000077ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000078000000-0x00000000785fffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000078600000-0x000000007c7fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000004817fffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] APIC: Static calls initialized
[ 0.000000] e820: update [mem 0x514ed018-0x514fd057] usable ==> usable
[ 0.000000] e820: update [mem 0x514ed018-0x514fd057] usable ==> usable
[ 0.000000] extended physical RAM map:
[ 0.000000] reserve setup_data: [mem 0x0000000000000000-0x0000000000057fff] usable
[ 0.000000] reserve setup_data: [mem 0x0000000000058000-0x0000000000058fff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000000059000-0x000000000009dfff] usable
[ 0.000000] reserve setup_data: [mem 0x000000000009e000-0x00000000000fffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000000100000-0x00000000514ed017] usable
[ 0.000000] reserve setup_data: [mem 0x00000000514ed018-0x00000000514fd057] usable
[ 0.000000] reserve setup_data: [mem 0x00000000514fd058-0x00000000556aafff] usable
[ 0.000000] reserve setup_data: [mem 0x00000000556ab000-0x00000000556abfff] ACPI NVS
[ 0.000000] reserve setup_data: [mem 0x00000000556ac000-0x00000000556acfff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000556ad000-0x0000000064df3fff] usable
[ 0.000000] reserve setup_data: [mem 0x0000000064df4000-0x000000006517ffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000065180000-0x00000000651c3fff] ACPI data
[ 0.000000] reserve setup_data: [mem 0x00000000651c4000-0x000000006f871fff] ACPI NVS
[ 0.000000] reserve setup_data: [mem 0x000000006f872000-0x000000006fffefff] reserved
[ 0.000000] reserve setup_data: [mem 0x000000006ffff000-0x000000006fffffff] usable
[ 0.000000] reserve setup_data: [mem 0x0000000070000000-0x0000000077ffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000078000000-0x00000000785fffff] usable
[ 0.000000] reserve setup_data: [mem 0x0000000078600000-0x000000007c7fffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000100000000-0x00000004817fffff] usable
[ 0.000000] efi: EFI v2.4 by American Megatrends
[ 0.000000] efi: ACPI=0x6518d000 ACPI 2.0=0x6518d000 SMBIOS=0xf0000 SMBIOS 3.0=0xf0020 TPMFinalLog=0x6f812000 ESRT=0x6fc86698 MEMATTR=0x62679298 INITRD=0x5577dd98 TPMEventLog=0x5577e018
[ 0.000000] efi: Remove mem34: MMIO range=[0xe0000000-0xefffffff] (256MB) from e820 map
[ 0.000000] e820: remove [mem 0xe0000000-0xefffffff] reserved
[ 0.000000] efi: Not removing mem35: MMIO range=[0xfe000000-0xfe010fff] (68KB) from e820 map
[ 0.000000] efi: Not removing mem36: MMIO range=[0xfec00000-0xfec00fff] (4KB) from e820 map
[ 0.000000] efi: Not removing mem37: MMIO range=[0xfee00000-0xfee00fff] (4KB) from e820 map
[ 0.000000] efi: Remove mem38: MMIO range=[0xff000000-0xffffffff] (16MB) from e820 map
[ 0.000000] e820: remove [mem 0xff000000-0xffffffff] reserved
[ 0.000000] SMBIOS 3.0.0 present.
[ 0.000000] DMI: Dell Inc. XPS 13 9360/0596KF, BIOS 2.21.0 06/02/2022
[ 0.000000] tsc: Detected 2900.000 MHz processor
[ 0.000000] tsc: Detected 2899.886 MHz TSC
[ 0.000692] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000695] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000702] last_pfn = 0x481800 max_arch_pfn = 0x400000000
[ 0.000706] MTRR map: 4 entries (3 fixed + 1 variable; max 23), built from 10 variable MTRRs
[ 0.000708] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.001032] last_pfn = 0x78600 max_arch_pfn = 0x400000000
[ 0.007379] esrt: Reserving ESRT space from 0x000000006fc86698 to 0x000000006fc866d0.
[ 0.007383] Using GB pages for direct mapping
[ 0.014325] printk: log_buf_len: 8388608 bytes
[ 0.014325] printk: early log buf free: 125328(95%)
[ 0.014326] Secure boot disabled
[ 0.014327] RAMDISK: [mem 0x514fe000-0x5276cfff]
[ 0.014331] ACPI: Early table checksum verification disabled
[ 0.014334] ACPI: RSDP 0x000000006518D000 000024 (v02 DELL )
[ 0.014338] ACPI: XSDT 0x000000006518D0C8 00010C (v01 DELL CBX3 01072009 AMI 00010013)
[ 0.014343] ACPI: FACP 0x00000000651B2A48 00010C (v05 DELL CBX3 01072009 AMI 00010013)
[ 0.014348] ACPI: DSDT 0x000000006518D260 0257E7 (v02 DELL CBX3 01072009 INTL 20160422)
[ 0.014351] ACPI: FACS 0x000000006F86F180 000040
[ 0.014353] ACPI: APIC 0x00000000651B2B58 000084 (v03 DELL CBX3 01072009 AMI 00010013)
[ 0.014356] ACPI: FPDT 0x00000000651B2BE0 000044 (v01 DELL CBX3 01072009 AMI 00010013)
[ 0.014358] ACPI: FIDT 0x00000000651B2C28 0000AC (v01 DELL CBX3 01072009 AMI 00010013)
[ 0.014361] ACPI: MCFG 0x00000000651B2CD8 00003C (v01 DELL CBX3 01072009 MSFT 00000097)
[ 0.014364] ACPI: HPET 0x00000000651B2D18 000038 (v01 DELL CBX3 01072009 AMI. 0005000B)
[ 0.014366] ACPI: SSDT 0x00000000651B2D50 000359 (v01 SataRe SataTabl 00001000 INTL 20160422)
[ 0.014369] ACPI: BOOT 0x00000000651B30B0 000028 (v01 DELL CBX3 01072009 AMI 00010013)
[ 0.014371] ACPI: SSDT 0x00000000651B30D8 0012CF (v02 SaSsdt SaSsdt 00003000 INTL 20160422)
[ 0.014374] ACPI: HPET 0x00000000651B43A8 000038 (v01 INTEL KBL-ULT 00000001 MSFT 0000005F)
[ 0.014377] ACPI: SSDT 0x00000000651B43E0 000D84 (v02 INTEL xh_rvp07 00000000 INTL 20160422)
[ 0.014379] ACPI: UEFI 0x00000000651B5168 000042 (v01 00000000 00000000)
[ 0.014382] ACPI: SSDT 0x00000000651B51B0 000EDE (v02 CpuRef CpuSsdt 00003000 INTL 20160422)
[ 0.014385] ACPI: LPIT 0x00000000651B6090 000094 (v01 INTEL KBL-ULT 00000000 MSFT 0000005F)
[ 0.014387] ACPI: WSMT 0x00000000651B6128 000028 (v01 DELL CBX3 00000000 MSFT 0000005F)
[ 0.014390] ACPI: SSDT 0x00000000651B6150 000161 (v02 INTEL HdaDsp 00000000 INTL 20160422)
[ 0.014392] ACPI: SSDT 0x00000000651B62B8 00029F (v02 INTEL sensrhub 00000000 INTL 20160422)
[ 0.014395] ACPI: SSDT 0x00000000651B6558 003002 (v02 INTEL PtidDevc 00001000 INTL 20160422)
[ 0.014397] ACPI: SSDT 0x00000000651B9560 0000DB (v02 INTEL TbtTypeC 00000000 INTL 20160422)
[ 0.014400] ACPI: DBGP 0x00000000651B9640 000034 (v01 INTEL 00000002 MSFT 0000005F)
[ 0.014403] ACPI: DBG2 0x00000000651B9678 000054 (v00 INTEL 00000002 MSFT 0000005F)
[ 0.014405] ACPI: SSDT 0x00000000651B96D0 0007DD (v02 INTEL UsbCTabl 00001000 INTL 20160422)
[ 0.014408] ACPI: SSDT 0x00000000651B9EB0 0084F1 (v02 DptfTa DptfTabl 00001000 INTL 20160422)
[ 0.014410] ACPI: SLIC 0x00000000651C23A8 000176 (v03 DELL CBX3 01072009 MSFT 00010013)
[ 0.014413] ACPI: NHLT 0x00000000651C2520 00002D (v00 INTEL EDK2 00000002 01000013)
[ 0.014415] ACPI: BGRT 0x00000000651C2550 000038 (v00 01072009 AMI 00010013)
[ 0.014418] ACPI: TPM2 0x00000000651C2588 000034 (v03 Tpm2Tabl 00000001 AMI 00000000)
[ 0.014421] ACPI: ASF! 0x00000000651C25C0 0000A0 (v32 INTEL HCG 00000001 TFSM 000F4240)
[ 0.014423] ACPI: DMAR 0x00000000651C2660 0000F0 (v01 INTEL KBL 00000001 INTL 00000001)
[ 0.014425] ACPI: Reserving FACP table memory at [mem 0x651b2a48-0x651b2b53]
[ 0.014426] ACPI: Reserving DSDT table memory at [mem 0x6518d260-0x651b2a46]
[ 0.014427] ACPI: Reserving FACS table memory at [mem 0x6f86f180-0x6f86f1bf]
[ 0.014428] ACPI: Reserving APIC table memory at [mem 0x651b2b58-0x651b2bdb]
[ 0.014428] ACPI: Reserving FPDT table memory at [mem 0x651b2be0-0x651b2c23]
[ 0.014429] ACPI: Reserving FIDT table memory at [mem 0x651b2c28-0x651b2cd3]
[ 0.014430] ACPI: Reserving MCFG table memory at [mem 0x651b2cd8-0x651b2d13]
[ 0.014430] ACPI: Reserving HPET table memory at [mem 0x651b2d18-0x651b2d4f]
[ 0.014431] ACPI: Reserving SSDT table memory at [mem 0x651b2d50-0x651b30a8]
[ 0.014432] ACPI: Reserving BOOT table memory at [mem 0x651b30b0-0x651b30d7]
[ 0.014432] ACPI: Reserving SSDT table memory at [mem 0x651b30d8-0x651b43a6]
[ 0.014433] ACPI: Reserving HPET table memory at [mem 0x651b43a8-0x651b43df]
[ 0.014434] ACPI: Reserving SSDT table memory at [mem 0x651b43e0-0x651b5163]
[ 0.014434] ACPI: Reserving UEFI table memory at [mem 0x651b5168-0x651b51a9]
[ 0.014435] ACPI: Reserving SSDT table memory at [mem 0x651b51b0-0x651b608d]
[ 0.014435] ACPI: Reserving LPIT table memory at [mem 0x651b6090-0x651b6123]
[ 0.014436] ACPI: Reserving WSMT table memory at [mem 0x651b6128-0x651b614f]
[ 0.014437] ACPI: Reserving SSDT table memory at [mem 0x651b6150-0x651b62b0]
[ 0.014437] ACPI: Reserving SSDT table memory at [mem 0x651b62b8-0x651b6556]
[ 0.014438] ACPI: Reserving SSDT table memory at [mem 0x651b6558-0x651b9559]
[ 0.014439] ACPI: Reserving SSDT table memory at [mem 0x651b9560-0x651b963a]
[ 0.014439] ACPI: Reserving DBGP table memory at [mem 0x651b9640-0x651b9673]
[ 0.014440] ACPI: Reserving DBG2 table memory at [mem 0x651b9678-0x651b96cb]
[ 0.014440] ACPI: Reserving SSDT table memory at [mem 0x651b96d0-0x651b9eac]
[ 0.014441] ACPI: Reserving SSDT table memory at [mem 0x651b9eb0-0x651c23a0]
[ 0.014442] ACPI: Reserving SLIC table memory at [mem 0x651c23a8-0x651c251d]
[ 0.014442] ACPI: Reserving NHLT table memory at [mem 0x651c2520-0x651c254c]
[ 0.014443] ACPI: Reserving BGRT table memory at [mem 0x651c2550-0x651c2587]
[ 0.014444] ACPI: Reserving TPM2 table memory at [mem 0x651c2588-0x651c25bb]
[ 0.014444] ACPI: Reserving ASF! table memory at [mem 0x651c25c0-0x651c265f]
[ 0.014445] ACPI: Reserving DMAR table memory at [mem 0x651c2660-0x651c274f]
[ 0.014577] No NUMA configuration found
[ 0.014578] Faking a node at [mem 0x0000000000000000-0x00000004817fffff]
[ 0.014585] NODE_DATA(0) allocated [mem 0x47f3d5000-0x47f3fffff]
[ 0.014766] Zone ranges:
[ 0.014767] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.014768] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.014770] Normal [mem 0x0000000100000000-0x00000004817fffff]
[ 0.014771] Device empty
[ 0.014772] Movable zone start for each node
[ 0.014774] Early memory node ranges
[ 0.014774] node 0: [mem 0x0000000000001000-0x0000000000057fff]
[ 0.014775] node 0: [mem 0x0000000000059000-0x000000000009dfff]
[ 0.014776] node 0: [mem 0x0000000000100000-0x00000000556aafff]
[ 0.014777] node 0: [mem 0x00000000556ad000-0x0000000064df3fff]
[ 0.014778] node 0: [mem 0x000000006ffff000-0x000000006fffffff]
[ 0.014778] node 0: [mem 0x0000000078000000-0x00000000785fffff]
[ 0.014779] node 0: [mem 0x0000000100000000-0x00000004817fffff]
[ 0.014781] Initmem setup node 0 [mem 0x0000000000001000-0x00000004817fffff]
[ 0.014791] On node 0, zone DMA: 1 pages in unavailable ranges
[ 0.014793] On node 0, zone DMA: 1 pages in unavailable ranges
[ 0.014815] On node 0, zone DMA: 98 pages in unavailable ranges
[ 0.017316] On node 0, zone DMA32: 2 pages in unavailable ranges
[ 0.017724] On node 0, zone DMA32: 45579 pages in unavailable ranges
[ 0.018223] On node 0, zone Normal: 31232 pages in unavailable ranges
[ 0.018454] On node 0, zone Normal: 26624 pages in unavailable ranges
[ 0.018462] Reserving Intel graphics memory at [mem 0x7a800000-0x7c7fffff]
[ 0.018644] ACPI: PM-Timer IO Port: 0x1808
[ 0.018650] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.018651] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.018652] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.018653] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[ 0.018679] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
[ 0.018683] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.018687] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.018692] ACPI: Using ACPI (MADT) for SMP configuration information
[ 0.018694] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.018699] e820: update [mem 0x62260000-0x623ecfff] usable ==> reserved
[ 0.018709] TSC deadline timer available
[ 0.018710] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.018724] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.018726] PM: hibernation: Registered nosave memory: [mem 0x00058000-0x00058fff]
[ 0.018727] PM: hibernation: Registered nosave memory: [mem 0x0009e000-0x000fffff]
[ 0.018729] PM: hibernation: Registered nosave memory: [mem 0x514ed000-0x514edfff]
[ 0.018730] PM: hibernation: Registered nosave memory: [mem 0x514fd000-0x514fdfff]
[ 0.018732] PM: hibernation: Registered nosave memory: [mem 0x556ab000-0x556abfff]
[ 0.018732] PM: hibernation: Registered nosave memory: [mem 0x556ac000-0x556acfff]
[ 0.018734] PM: hibernation: Registered nosave memory: [mem 0x62260000-0x623ecfff]
[ 0.018735] PM: hibernation: Registered nosave memory: [mem 0x64df4000-0x6517ffff]
[ 0.018735] PM: hibernation: Registered nosave memory: [mem 0x65180000-0x651c3fff]
[ 0.018736] PM: hibernation: Registered nosave memory: [mem 0x651c4000-0x6f871fff]
[ 0.018737] PM: hibernation: Registered nosave memory: [mem 0x6f872000-0x6fffefff]
[ 0.018738] PM: hibernation: Registered nosave memory: [mem 0x70000000-0x77ffffff]
[ 0.018739] PM: hibernation: Registered nosave memory: [mem 0x78600000-0x7c7fffff]
[ 0.018740] PM: hibernation: Registered nosave memory: [mem 0x7c800000-0xfdffffff]
[ 0.018740] PM: hibernation: Registered nosave memory: [mem 0xfe000000-0xfe010fff]
[ 0.018741] PM: hibernation: Registered nosave memory: [mem 0xfe011000-0xfebfffff]
[ 0.018742] PM: hibernation: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.018742] PM: hibernation: Registered nosave memory: [mem 0xfec01000-0xfedfffff]
[ 0.018743] PM: hibernation: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.018743] PM: hibernation: Registered nosave memory: [mem 0xfee01000-0xffffffff]
[ 0.018745] [mem 0x7c800000-0xfdffffff] available for PCI devices
[ 0.018746] Booting paravirtualized kernel on bare hardware
[ 0.018747] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.023278] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[ 0.023575] percpu: Embedded 63 pages/cpu s221184 r8192 d28672 u524288
[ 0.023580] pcpu-alloc: s221184 r8192 d28672 u524288 alloc=1*2097152
[ 0.023582] pcpu-alloc: [0] 0 1 2 3
[ 0.023599] Kernel command line: BOOT_IMAGE=/vmlinuz-6.8.0-rc4+ root=UUID=32e29882-d94d-4a92-9ee4-4d03002bfa29 ro quiet pci=noaer mem_sleep_default=deep log_buf_len=8M cryptomgr.notests usbcore.dyndbg=+p
[ 0.023680] Unknown kernel command line parameters "BOOT_IMAGE=/vmlinuz-6.8.0-rc4+", will be passed to user space.
[ 0.023713] random: crng init done
[ 0.025204] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
[ 0.025960] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[ 0.026021] Fallback order for Node 0: 0
[ 0.026023] Built 1 zonelists, mobility grouping on. Total pages: 4026691
[ 0.026024] Policy zone: Normal
[ 0.026028] mem auto-init: stack:all(zero), heap alloc:on, heap free:off
[ 0.026035] software IO TLB: area num 4.
[ 0.044143] Memory: 1657864K/16363068K available (16384K kernel code, 2330K rwdata, 5868K rodata, 3976K init, 3680K bss, 493948K reserved, 0K cma-reserved)
[ 0.044327] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.044338] Kernel/User page tables isolation: enabled
[ 0.044362] ftrace: allocating 42500 entries in 167 pages
[ 0.051403] ftrace: allocated 167 pages with 5 groups
[ 0.052018] Dynamic Preempt: voluntary
[ 0.052045] rcu: Preemptible hierarchical RCU implementation.
[ 0.052045] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4.
[ 0.052046] Trampoline variant of Tasks RCU enabled.
[ 0.052047] Rude variant of Tasks RCU enabled.
[ 0.052047] Tracing variant of Tasks RCU enabled.
[ 0.052048] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[ 0.052049] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.054427] NR_IRQS: 524544, nr_irqs: 1024, preallocated irqs: 16
[ 0.054631] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[ 0.054796] Console: colour dummy device 80x25
[ 0.054798] printk: legacy console [tty0] enabled
[ 0.054831] ACPI: Core revision 20230628
[ 0.055018] hpet: HPET dysfunctional in PC10. Force disabled.
[ 0.055019] APIC: Switch to symmetric I/O mode setup
[ 0.055020] DMAR: Host address width 39
[ 0.055021] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[ 0.055027] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 19e2ff0505e
[ 0.055029] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[ 0.055032] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da
[ 0.055034] DMAR: RMRR base: 0x00000064ec2000 end: 0x00000064ee1fff
[ 0.055035] DMAR: RMRR base: 0x0000007a000000 end: 0x0000007c7fffff
[ 0.055036] DMAR: ANDD device: 1 name: \_SB.PCI0.I2C0
[ 0.055037] DMAR: ANDD device: 2 name: \_SB.PCI0.I2C1
[ 0.055038] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
[ 0.055040] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[ 0.055041] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
[ 0.056668] DMAR-IR: Enabled IRQ remapping in x2apic mode
[ 0.056670] x2apic enabled
[ 0.056727] APIC: Switched APIC routing to: cluster x2apic
[ 0.060581] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x29ccd767b87, max_idle_ns: 440795223720 ns
[ 0.060588] Calibrating delay loop (skipped), value calculated using timer frequency.. 5799.77 BogoMIPS (lpj=11599544)
[ 0.060617] CPU0: Thermal monitoring enabled (TM1)
[ 0.060659] process: using mwait in idle threads
[ 0.060662] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
[ 0.060663] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
[ 0.060667] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[ 0.060669] Spectre V2 : Mitigation: IBRS
[ 0.060669] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.060670] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT
[ 0.060671] RETBleed: Mitigation: IBRS
[ 0.060672] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[ 0.060673] Spectre V2 : User space: Mitigation: STIBP via prctl
[ 0.060675] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl
[ 0.060681] MDS: Mitigation: Clear CPU buffers
[ 0.060682] MMIO Stale Data: Mitigation: Clear CPU buffers
[ 0.060685] SRBDS: Mitigation: Microcode
[ 0.060691] GDS: Mitigation: Microcode
[ 0.060697] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.060698] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.060699] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.060700] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
[ 0.060701] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
[ 0.060703] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.060704] x86/fpu: xstate_offset[3]: 832, xstate_sizes[3]: 64
[ 0.060705] x86/fpu: xstate_offset[4]: 896, xstate_sizes[4]: 64
[ 0.060706] x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format.
[ 0.064585] Freeing SMP alternatives memory: 36K
[ 0.064585] pid_max: default: 32768 minimum: 301
[ 0.064585] LSM: initializing lsm=lockdown,capability,landlock,yama,apparmor,tomoyo,bpf,integrity
[ 0.064585] landlock: Up and running.
[ 0.064585] Yama: becoming mindful.
[ 0.064585] AppArmor: AppArmor initialized
[ 0.064585] TOMOYO Linux initialized
[ 0.064585] LSM support for eBPF active
[ 0.064585] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.064585] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.064585] smpboot: CPU0: Intel(R) Core(TM) i7-7500U CPU @ 2.70GHz (family: 0x6, model: 0x8e, stepping: 0x9)
[ 0.064585] RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1.
[ 0.064585] RCU Tasks Rude: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1.
[ 0.064585] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1.
[ 0.064585] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
[ 0.064585] ... version: 4
[ 0.064585] ... bit width: 48
[ 0.064585] ... generic registers: 4
[ 0.064585] ... value mask: 0000ffffffffffff
[ 0.064585] ... max period: 00007fffffffffff
[ 0.064585] ... fixed-purpose events: 3
[ 0.064585] ... event mask: 000000070000000f
[ 0.064585] signal: max sigframe size: 2032
[ 0.064585] Estimated ratio of average max frequency by base frequency (times 1024): 1235
[ 0.064585] rcu: Hierarchical SRCU implementation.
[ 0.064585] rcu: Max phase no-delay instances is 1000.
[ 0.064585] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.064585] smp: Bringing up secondary CPUs ...
[ 0.064585] smpboot: x86: Booting SMP configuration:
[ 0.064585] .... node #0, CPUs: #1 #2 #3
[ 0.064585] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details.
[ 0.064585] MMIO Stale Data CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/processor_mmio_stale_data.html for more details.
[ 0.064585] smp: Brought up 1 node, 4 CPUs
[ 0.064585] smpboot: Max logical packages: 1
[ 0.064585] smpboot: Total of 4 processors activated (23199.08 BogoMIPS)
[ 0.084587] node 0 deferred pages initialised in 20ms
[ 0.085010] devtmpfs: initialized
[ 0.085010] x86/mm: Memory block size: 128MB
[ 0.085940] ACPI: PM: Registering ACPI NVS region [mem 0x556ab000-0x556abfff] (4096 bytes)
[ 0.085940] ACPI: PM: Registering ACPI NVS region [mem 0x651c4000-0x6f871fff] (174776320 bytes)
[ 0.089858] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.089866] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[ 0.089912] pinctrl core: initialized pinctrl subsystem
[ 0.090402] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.090632] DMA: preallocated 2048 KiB GFP_KERNEL pool for atomic allocations
[ 0.090737] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[ 0.090863] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[ 0.090879] audit: initializing netlink subsys (disabled)
[ 0.090895] audit: type=2000 audit(1708146585.028:1): state=initialized audit_enabled=0 res=1
[ 0.090895] thermal_sys: Registered thermal governor 'fair_share'
[ 0.090895] thermal_sys: Registered thermal governor 'bang_bang'
[ 0.090895] thermal_sys: Registered thermal governor 'step_wise'
[ 0.090895] thermal_sys: Registered thermal governor 'user_space'
[ 0.090895] thermal_sys: Registered thermal governor 'power_allocator'
[ 0.090895] cpuidle: using governor ladder
[ 0.090895] cpuidle: using governor menu
[ 0.090895] Simple Boot Flag at 0x47 set to 0x80
[ 0.090895] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.090895] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.090895] PCI: ECAM [mem 0xe0000000-0xefffffff] (base 0xe0000000) for domain 0000 [bus 00-ff]
[ 0.090895] PCI: not using ECAM ([mem 0xe0000000-0xefffffff] not reserved)
[ 0.090895] PCI: Using configuration type 1 for base access
[ 0.090895] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
[ 0.090895] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.090895] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page
[ 0.090895] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.090895] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
[ 0.090895] ACPI: Added _OSI(Module Device)
[ 0.090895] ACPI: Added _OSI(Processor Device)
[ 0.090895] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.090895] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.130884] ACPI: 11 ACPI AML tables successfully acquired and loaded
[ 0.136898] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ 0.141911] ACPI: Dynamic OEM Table Load:
[ 0.141911] ACPI: SSDT 0xFFFF92C9C198DC00 0003FF (v02 PmRef Cpu0Cst 00003001 INTL 20160422)
[ 0.142823] ACPI: Dynamic OEM Table Load:
[ 0.142828] ACPI: SSDT 0xFFFF92C9C176E800 0006F6 (v02 PmRef Cpu0Ist 00003000 INTL 20160422)
[ 0.146336] ACPI: Dynamic OEM Table Load:
[ 0.146342] ACPI: SSDT 0xFFFF92C9C176F800 00065C (v02 PmRef ApIst 00003000 INTL 20160422)
[ 0.148014] ACPI: Dynamic OEM Table Load:
[ 0.148018] ACPI: SSDT 0xFFFF92C9C198A600 00018A (v02 PmRef ApCst 00003000 INTL 20160422)
[ 0.151080] ACPI: _OSC evaluated successfully for all CPUs
[ 0.151262] ACPI: EC: EC started
[ 0.151263] ACPI: EC: interrupt blocked
[ 0.156745] ACPI: EC: EC_CMD/EC_SC=0x934, EC_DATA=0x930
[ 0.156748] ACPI: \_SB_.PCI0.LPCB.ECDV: Boot DSDT EC used to handle transactions
[ 0.156749] ACPI: Interpreter enabled
[ 0.156785] ACPI: PM: (supports S0 S3 S4 S5)
[ 0.156786] ACPI: Using IOAPIC for interrupt routing
[ 0.156822] PCI: ECAM [mem 0xe0000000-0xefffffff] (base 0xe0000000) for domain 0000 [bus 00-ff]
[ 0.157748] PCI: ECAM [mem 0xe0000000-0xefffffff] reserved as ACPI motherboard resource
[ 0.157757] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.157758] PCI: Using E820 reservations for host bridge windows
[ 0.158407] ACPI: Enabled 8 GPEs in block 00 to 7F
[ 0.162406] ACPI: \_SB_.PCI0.RP09.PXSX.WRST: New power resource
[ 0.162729] ACPI: \_SB_.PCI0.RP10.PXSX.WRST: New power resource
[ 0.164654] ACPI: \_SB_.PCI0.RP11.PXSX.WRST: New power resource
[ 0.164970] ACPI: \_SB_.PCI0.RP12.PXSX.WRST: New power resource
[ 0.165285] ACPI: \_SB_.PCI0.RP13.PXSX.WRST: New power resource
[ 0.165601] ACPI: \_SB_.PCI0.RP01.PXSX.WRST: New power resource
[ 0.166417] ACPI: \_SB_.PCI0.RP02.PXSX.WRST: New power resource
[ 0.166737] ACPI: \_SB_.PCI0.RP03.PXSX.WRST: New power resource
[ 0.167052] ACPI: \_SB_.PCI0.RP04.PXSX.WRST: New power resource
[ 0.167366] ACPI: \_SB_.PCI0.RP05.PXSX.WRST: New power resource
[ 0.167680] ACPI: \_SB_.PCI0.RP06.PXSX.WRST: New power resource
[ 0.167993] ACPI: \_SB_.PCI0.RP07.PXSX.WRST: New power resource
[ 0.168586] ACPI: \_SB_.PCI0.RP08.PXSX.WRST: New power resource
[ 0.168638] ACPI: \_SB_.PCI0.RP17.PXSX.WRST: New power resource
[ 0.168952] ACPI: \_SB_.PCI0.RP18.PXSX.WRST: New power resource
[ 0.169266] ACPI: \_SB_.PCI0.RP19.PXSX.WRST: New power resource
[ 0.169579] ACPI: \_SB_.PCI0.RP20.PXSX.WRST: New power resource
[ 0.170902] ACPI: \_SB_.PCI0.RP14.PXSX.WRST: New power resource
[ 0.171219] ACPI: \_SB_.PCI0.RP15.PXSX.WRST: New power resource
[ 0.171539] ACPI: \_SB_.PCI0.RP16.PXSX.WRST: New power resource
[ 0.194695] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[ 0.194701] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[ 0.194904] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug SHPCHotplug PME]
[ 0.195275] acpi PNP0A08:00: _OSC: OS now controls [PCIeCapability LTR]
[ 0.195277] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[ 0.196234] PCI host bridge to bus 0000:00
[ 0.196236] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.196238] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.196240] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000dffff window]
[ 0.196242] pci_bus 0000:00: root bus resource [mem 0x7c800000-0xdfffffff window]
[ 0.196243] pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window]
[ 0.196244] pci_bus 0000:00: root bus resource [bus 00-fe]
[ 0.196262] pci 0000:00:00.0: [8086:5904] type 00 class 0x060000 conventional PCI endpoint
[ 0.196330] pci 0000:00:02.0: [8086:5916] type 00 class 0x030000 PCIe Root Complex Integrated Endpoint
[ 0.196337] pci 0000:00:02.0: BAR 0 [mem 0xdb000000-0xdbffffff 64bit]
[ 0.196342] pci 0000:00:02.0: BAR 2 [mem 0x90000000-0x9fffffff 64bit pref]
[ 0.196346] pci 0000:00:02.0: BAR 4 [io 0xf000-0xf03f]
[ 0.196358] pci 0000:00:02.0: BAR 2: assigned to efifb
[ 0.196361] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.196517] pci 0000:00:04.0: [8086:1903] type 00 class 0x118000 conventional PCI endpoint
[ 0.196525] pci 0000:00:04.0: BAR 0 [mem 0xdc320000-0xdc327fff 64bit]
[ 0.196816] pci 0000:00:14.0: [8086:9d2f] type 00 class 0x0c0330 conventional PCI endpoint
[ 0.196833] pci 0000:00:14.0: BAR 0 [mem 0xdc310000-0xdc31ffff 64bit]
[ 0.196892] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.197434] pci 0000:00:14.2: [8086:9d31] type 00 class 0x118000 conventional PCI endpoint
[ 0.197449] pci 0000:00:14.2: BAR 0 [mem 0xdc334000-0xdc334fff 64bit]
[ 0.197590] pci 0000:00:15.0: [8086:9d60] type 00 class 0x118000 conventional PCI endpoint
[ 0.197620] pci 0000:00:15.0: BAR 0 [mem 0xdc333000-0xdc333fff 64bit]
[ 0.197982] pci 0000:00:15.1: [8086:9d61] type 00 class 0x118000 conventional PCI endpoint
[ 0.198010] pci 0000:00:15.1: BAR 0 [mem 0xdc332000-0xdc332fff 64bit]
[ 0.198376] pci 0000:00:16.0: [8086:9d3a] type 00 class 0x078000 conventional PCI endpoint
[ 0.198389] pci 0000:00:16.0: BAR 0 [mem 0xdc331000-0xdc331fff 64bit]
[ 0.198433] pci 0000:00:16.0: PME# supported from D3hot
[ 0.198768] pci 0000:00:1c.0: [8086:9d10] type 01 class 0x060400 PCIe Root Port
[ 0.198786] pci 0000:00:1c.0: PCI bridge to [bus 01-39]
[ 0.198791] pci 0000:00:1c.0: bridge window [mem 0xc4000000-0xda0fffff]
[ 0.198797] pci 0000:00:1c.0: bridge window [mem 0xa0000000-0xc1ffffff 64bit pref]
[ 0.198839] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.199329] pci 0000:00:1c.4: [8086:9d14] type 01 class 0x060400 PCIe Root Port
[ 0.199349] pci 0000:00:1c.4: PCI bridge to [bus 3a]
[ 0.199354] pci 0000:00:1c.4: bridge window [mem 0xdc000000-0xdc1fffff]
[ 0.199410] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.199908] pci 0000:00:1d.0: [8086:9d18] type 01 class 0x060400 PCIe Root Port
[ 0.199927] pci 0000:00:1d.0: PCI bridge to [bus 3b]
[ 0.199931] pci 0000:00:1d.0: bridge window [mem 0xdc200000-0xdc2fffff]
[ 0.199980] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.200487] pci 0000:00:1f.0: [8086:9d58] type 00 class 0x060100 conventional PCI endpoint
[ 0.200803] pci 0000:00:1f.2: [8086:9d21] type 00 class 0x058000 conventional PCI endpoint
[ 0.200815] pci 0000:00:1f.2: BAR 0 [mem 0xdc32c000-0xdc32ffff]
[ 0.201047] pci 0000:00:1f.3: [8086:9d71] type 00 class 0x040380 conventional PCI endpoint
[ 0.201066] pci 0000:00:1f.3: BAR 0 [mem 0xdc328000-0xdc32bfff 64bit]
[ 0.201089] pci 0000:00:1f.3: BAR 4 [mem 0xdc300000-0xdc30ffff 64bit]
[ 0.201130] pci 0000:00:1f.3: PME# supported from D3hot D3cold
[ 0.201720] pci 0000:00:1f.4: [8086:9d23] type 00 class 0x0c0500 conventional PCI endpoint
[ 0.201778] pci 0000:00:1f.4: BAR 0 [mem 0xdc330000-0xdc3300ff 64bit]
[ 0.201849] pci 0000:00:1f.4: BAR 4 [io 0xf040-0xf05f]
[ 0.202176] pci 0000:00:1c.0: PCI bridge to [bus 01-39]
[ 0.202511] pci 0000:3a:00.0: [168c:003e] type 00 class 0x028000 PCIe Endpoint
[ 0.202727] pci 0000:3a:00.0: BAR 0 [mem 0xdc000000-0xdc1fffff 64bit]
[ 0.203922] pci 0000:3a:00.0: PME# supported from D0 D3hot D3cold
[ 0.205712] pci 0000:00:1c.4: PCI bridge to [bus 3a]
[ 0.205801] pci 0000:3b:00.0: [1c5c:1284] type 00 class 0x010802 PCIe Endpoint
[ 0.205820] pci 0000:3b:00.0: BAR 0 [mem 0xdc200000-0xdc203fff 64bit]
[ 0.205924] pci 0000:3b:00.0: PME# supported from D0 D1 D3hot
[ 0.206300] pci 0000:00:1d.0: PCI bridge to [bus 3b]
[ 0.209290] ACPI: PCI: Interrupt link LNKA configured for IRQ 11
[ 0.209350] ACPI: PCI: Interrupt link LNKB configured for IRQ 10
[ 0.209407] ACPI: PCI: Interrupt link LNKC configured for IRQ 11
[ 0.209464] ACPI: PCI: Interrupt link LNKD configured for IRQ 11
[ 0.209522] ACPI: PCI: Interrupt link LNKE configured for IRQ 11
[ 0.209579] ACPI: PCI: Interrupt link LNKF configured for IRQ 11
[ 0.209636] ACPI: PCI: Interrupt link LNKG configured for IRQ 11
[ 0.209694] ACPI: PCI: Interrupt link LNKH configured for IRQ 11
[ 0.218579] ACPI: EC: interrupt unblocked
[ 0.218581] ACPI: EC: event unblocked
[ 0.220587] ACPI: EC: EC_CMD/EC_SC=0x934, EC_DATA=0x930
[ 0.220587] ACPI: EC: GPE=0x14
[ 0.220587] ACPI: \_SB_.PCI0.LPCB.ECDV: Boot DSDT EC initialization complete
[ 0.220587] ACPI: \_SB_.PCI0.LPCB.ECDV: EC: Used to handle transactions and events
[ 0.220603] iommu: Default domain type: Translated
[ 0.220603] iommu: DMA domain TLB invalidation policy: lazy mode
[ 0.220687] pps_core: LinuxPPS API ver. 1 registered
[ 0.220688] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@xxxxxxxx>
[ 0.220691] PTP clock support registered
[ 0.220699] EDAC MC: Ver: 3.0.0
[ 0.221018] efivars: Registered efivars operations
[ 0.221018] NetLabel: Initializing
[ 0.221018] NetLabel: domain hash size = 128
[ 0.221018] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.221018] NetLabel: unlabeled traffic allowed by default
[ 0.221018] PCI: Using ACPI for IRQ routing
[ 0.247344] PCI: pci_cache_line_size set to 64 bytes
[ 0.247720] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
[ 0.247721] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
[ 0.247722] e820: reserve RAM buffer [mem 0x514ed018-0x53ffffff]
[ 0.247723] e820: reserve RAM buffer [mem 0x556ab000-0x57ffffff]
[ 0.247724] e820: reserve RAM buffer [mem 0x62260000-0x63ffffff]
[ 0.247725] e820: reserve RAM buffer [mem 0x64df4000-0x67ffffff]
[ 0.247726] e820: reserve RAM buffer [mem 0x78600000-0x7bffffff]
[ 0.247727] e820: reserve RAM buffer [mem 0x481800000-0x483ffffff]
[ 0.247762] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[ 0.247762] pci 0000:00:02.0: vgaarb: bridge control possible
[ 0.247762] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.247762] vgaarb: loaded
[ 0.248585] clocksource: Switched to clocksource tsc-early
[ 0.248592] VFS: Disk quotas dquot_6.6.0
[ 0.248592] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.248592] AppArmor: AppArmor Filesystem Enabled
[ 0.248592] pnp: PnP ACPI init
[ 0.249514] system 00:00: [io 0x0680-0x069f] has been reserved
[ 0.249517] system 00:00: [io 0xffff] has been reserved
[ 0.249518] system 00:00: [io 0xffff] has been reserved
[ 0.249520] system 00:00: [io 0xffff] has been reserved
[ 0.249521] system 00:00: [io 0x1800-0x18fe] has been reserved
[ 0.249522] system 00:00: [io 0x164e-0x164f] has been reserved
[ 0.249652] system 00:02: [io 0x1854-0x1857] has been reserved
[ 0.250080] system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.250082] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.250084] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.250085] system 00:05: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.250087] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.250088] system 00:05: [mem 0xfed90000-0xfed93fff] could not be reserved
[ 0.250090] system 00:05: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.250092] system 00:05: [mem 0xff000000-0xffffffff] has been reserved
[ 0.250093] system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.250095] system 00:05: [mem 0xdffe0000-0xdfffffff] has been reserved
[ 0.250136] system 00:06: [mem 0xfd000000-0xfdabffff] has been reserved
[ 0.250138] system 00:06: [mem 0xfdad0000-0xfdadffff] has been reserved
[ 0.250139] system 00:06: [mem 0xfdb00000-0xfdffffff] has been reserved
[ 0.250141] system 00:06: [mem 0xfe000000-0xfe01ffff] could not be reserved
[ 0.250142] system 00:06: [mem 0xfe036000-0xfe03bfff] has been reserved
[ 0.250144] system 00:06: [mem 0xfe03d000-0xfe3fffff] has been reserved
[ 0.250145] system 00:06: [mem 0xfe410000-0xfe7fffff] has been reserved
[ 0.250426] system 00:07: [io 0xff00-0xfffe] has been reserved
[ 0.251555] system 00:08: [mem 0xfe029000-0xfe029fff] has been reserved
[ 0.251557] system 00:08: [mem 0xfe028000-0xfe028fff] has been reserved
[ 0.256776] pnp: PnP ACPI: found 9 devices
[ 0.262501] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.262543] pci 0000:00:1f.1: [8086:9d20] type 00 class 0x058000 conventional PCI endpoint
[ 0.262603] pci 0000:00:1f.1: BAR 0 [mem 0xfd000000-0xfdffffff 64bit]
[ 0.262873] NET: Registered PF_INET protocol family
[ 0.262992] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[ 0.265243] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear)
[ 0.265272] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.265320] TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[ 0.265502] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear)
[ 0.265697] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.265772] MPTCP token hash table entries: 16384 (order: 6, 393216 bytes, linear)
[ 0.265813] UDP hash table entries: 8192 (order: 6, 262144 bytes, linear)
[ 0.265857] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes, linear)
[ 0.265906] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 0.265911] NET: Registered PF_XDP protocol family
[ 0.265919] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 01-39] add_size 1000
[ 0.265933] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]: assigned
[ 0.265937] pci 0000:00:1c.0: PCI bridge to [bus 01-39]
[ 0.265940] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
[ 0.265943] pci 0000:00:1c.0: bridge window [mem 0xc4000000-0xda0fffff]
[ 0.265946] pci 0000:00:1c.0: bridge window [mem 0xa0000000-0xc1ffffff 64bit pref]
[ 0.265950] pci 0000:00:1c.4: PCI bridge to [bus 3a]
[ 0.265953] pci 0000:00:1c.4: bridge window [mem 0xdc000000-0xdc1fffff]
[ 0.265958] pci 0000:00:1d.0: PCI bridge to [bus 3b]
[ 0.265961] pci 0000:00:1d.0: bridge window [mem 0xdc200000-0xdc2fffff]
[ 0.265966] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.265968] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.265969] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000dffff window]
[ 0.265970] pci_bus 0000:00: resource 7 [mem 0x7c800000-0xdfffffff window]
[ 0.265971] pci_bus 0000:00: resource 8 [mem 0xfd000000-0xfe7fffff window]
[ 0.265973] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff]
[ 0.265974] pci_bus 0000:01: resource 1 [mem 0xc4000000-0xda0fffff]
[ 0.265975] pci_bus 0000:01: resource 2 [mem 0xa0000000-0xc1ffffff 64bit pref]
[ 0.265977] pci_bus 0000:3a: resource 1 [mem 0xdc000000-0xdc1fffff]
[ 0.265978] pci_bus 0000:3b: resource 1 [mem 0xdc200000-0xdc2fffff]
[ 0.266605] PCI: CLS 0 bytes, default 64
[ 0.266619] DMAR: ACPI device "device:79" under DMAR at fed91000 as 00:15.0
[ 0.266622] DMAR: ACPI device "device:7a" under DMAR at fed91000 as 00:15.1
[ 0.266631] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.266632] software IO TLB: mapped [mem 0x000000005e260000-0x0000000062260000] (64MB)
[ 0.266664] Unpacking initramfs...
[ 0.266685] sgx: EPC section 0x70200000-0x75f7ffff
[ 0.267439] Initialise system trusted keyrings
[ 0.267449] Key type blacklist registered
[ 0.267523] workingset: timestamp_bits=36 max_order=22 bucket_order=0
[ 0.267543] zbud: loaded
[ 0.267717] fuse: init (API version 7.39)
[ 0.267987] integrity: Platform Keyring initialized
[ 0.267998] integrity: Machine keyring initialized
[ 0.268003] Key type asymmetric registered
[ 0.268006] Asymmetric key parser 'x509' registered
[ 0.296367] Freeing initrd memory: 18876K
[ 0.299855] alg: self-tests disabled
[ 0.299908] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[ 0.299930] io scheduler mq-deadline registered
[ 0.300948] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 0.303137] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.303139] ACPI: thermal: Thermal Zone [THM] (25 C)
[ 0.303301] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.303916] hpet_acpi_add: no address or irqs in _CRS
[ 0.315383] tpm_tis MSFT0101:00: 2.0 TPM (device-id 0xFE, rev-id 4)
[ 0.354161] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 0.355709] i8042: Warning: Keylock active
[ 0.357929] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.357934] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.358025] mousedev: PS/2 mouse device common for all mice
[ 0.358045] rtc_cmos 00:01: RTC can wake from S4
[ 0.358771] rtc_cmos 00:01: registered as rtc0
[ 0.358914] rtc_cmos 00:01: setting system clock to 2024-02-17T05:09:46 UTC (1708146586)
[ 0.358936] rtc_cmos 00:01: alarms up to one month, y3k, 242 bytes nvram
[ 0.359071] intel_pstate: Intel P-state driver initializing
[ 0.359275] intel_pstate: HWP enabled
[ 0.359341] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.359598] efifb: probing for efifb
[ 0.359609] efifb: framebuffer at 0x90000000, using 22500k, total 22500k
[ 0.359611] efifb: mode is 3200x1800x32, linelength=12800, pages=1
[ 0.359612] efifb: scrolling: redraw
[ 0.359613] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.359689] Console: switching to colour frame buffer device 200x56
[ 0.360060] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.363127] fb0: EFI VGA frame buffer device
[ 0.363281] NET: Registered PF_INET6 protocol family
[ 0.366979] Segment Routing with IPv6
[ 0.366990] In-situ OAM (IOAM) with IPv6
[ 0.367012] mip6: Mobile IPv6
[ 0.367015] NET: Registered PF_PACKET protocol family
[ 0.367037] mpls_gso: MPLS GSO support
[ 0.367228] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.367292] microcode: Current revision: 0x000000f4
[ 0.367293] microcode: Updated early from: 0x000000f0
[ 0.367412] IPI shorthand broadcast: enabled
[ 0.368410] sched_clock: Marking stable (361576451, 5827416)->(399896439, -32492572)
[ 0.368549] registered taskstats version 1
[ 0.368577] Loading compiled-in X.509 certificates
[ 0.369087] Loaded X.509 cert 'Build time autogenerated kernel key: d47c33c70b7d8c925a93309ef39ed6f8acab6016'
[ 0.370539] Key type .fscrypt registered
[ 0.370541] Key type fscrypt-provisioning registered
[ 0.375224] cryptd: module verification failed: signature and/or required key missing - tainting kernel
[ 0.375694] cryptd: max_cpu_qlen set to 1000
[ 0.376651] AVX2 version of gcm_enc/dec engaged.
[ 0.376686] AES CTR mode by8 optimization enabled
[ 0.388307] Key type encrypted registered
[ 0.388313] AppArmor: AppArmor sha256 policy hashing enabled
[ 0.388576] integrity: Loading X.509 certificate: UEFI:db
[ 0.388597] integrity: Loaded X.509 cert 'Dell Inc. UEFI DB: 5ddb772dc880660055ba0bc131886bb630a639e7'
[ 0.388598] integrity: Loading X.509 certificate: UEFI:db
[ 0.388615] integrity: Loaded X.509 cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4'
[ 0.388616] integrity: Loading X.509 certificate: UEFI:db
[ 0.388632] integrity: Loaded X.509 cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53'
[ 0.388952] ima: Allocated hash algorithm: sha256
[ 0.426599] ima: No architecture policies found
[ 0.426619] evm: Initialising EVM extended attributes:
[ 0.426620] evm: security.selinux
[ 0.426621] evm: security.SMACK64 (disabled)
[ 0.426622] evm: security.SMACK64EXEC (disabled)
[ 0.426623] evm: security.SMACK64TRANSMUTE (disabled)
[ 0.426624] evm: security.SMACK64MMAP (disabled)
[ 0.426625] evm: security.apparmor
[ 0.426626] evm: security.ima
[ 0.426626] evm: security.capability
[ 0.426627] evm: HMAC attrs: 0x1
[ 0.427580] RAS: Correctable Errors collector initialized.
[ 0.427618] clk: Disabling unused clocks
[ 0.428543] Freeing unused decrypted memory: 2036K
[ 0.428991] Freeing unused kernel image (initmem) memory: 3976K
[ 0.450082] Write protecting the kernel read-only data: 22528k
[ 0.450969] Freeing unused kernel image (rodata/data gap) memory: 276K
[ 0.521809] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 0.521810] x86/mm: Checking user space page tables
[ 0.563967] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 0.563971] Run /init as init process
[ 0.563972] with arguments:
[ 0.563974] /init
[ 0.563975] with environment:
[ 0.563975] HOME=/
[ 0.563976] TERM=linux
[ 0.563977] BOOT_IMAGE=/vmlinuz-6.8.0-rc4+
[ 0.745638] hid: raw HID events driver (C) Jiri Kosina
[ 0.748243] intel-lpss 0000:00:15.0: enabling device (0000 -> 0002)
[ 0.748714] i801_smbus 0000:00:1f.4: SPD Write Disable is set
[ 0.748743] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
[ 0.750203] idma64 idma64.0: Found Intel integrated DMA 64-bit
[ 0.772439] i2c i2c-0: 2/2 memory slots populated (from DMI)
[ 0.780116] ACPI: bus type drm_connector registered
[ 0.788139] intel-lpss 0000:00:15.1: enabling device (0000 -> 0002)
[ 0.788411] idma64 idma64.1: Found Intel integrated DMA 64-bit
[ 0.790123] ACPI: bus type USB registered
[ 0.790157] usbcore: registered new interface driver usbfs
[ 0.790168] usbcore: registered new interface driver hub
[ 0.790178] usbcore: registered new device driver usb
[ 0.798193] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.798205] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[ 0.799325] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000081109810
[ 0.799888] xhci_hcd 0000:00:14.0: supports USB remote wakeup
[ 0.800199] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.800203] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 0.800206] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
[ 0.800208] xhci_hcd 0000:00:14.0: supports USB remote wakeup
[ 0.800236] usb usb1: default language 0x0409
[ 0.800247] usb usb1: udev 1, busnum 1, minor = 0
[ 0.800250] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.08
[ 0.800252] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.800254] usb usb1: Product: xHCI Host Controller
[ 0.800255] usb usb1: Manufacturer: Linux 6.8.0-rc4+ xhci-hcd
[ 0.800257] usb usb1: SerialNumber: 0000:00:14.0
[ 0.800397] usb usb1: usb_probe_device
[ 0.800399] usb usb1: configuration #1 chosen from 1 choice
[ 0.800409] usb usb1: adding 1-0:1.0 (config #1, interface 0)
[ 0.800442] hub 1-0:1.0: usb_probe_interface
[ 0.800444] hub 1-0:1.0: usb_probe_interface - got id
[ 0.800446] hub 1-0:1.0: USB hub found
[ 0.800462] hub 1-0:1.0: 12 ports detected
[ 0.800464] hub 1-0:1.0: standalone hub
[ 0.800465] hub 1-0:1.0: no power switching (usb 1.0)
[ 0.800466] hub 1-0:1.0: individual port over-current protection
[ 0.800468] hub 1-0:1.0: Single TT
[ 0.800469] hub 1-0:1.0: TT requires at most 8 FS bit times (666 ns)
[ 0.800471] hub 1-0:1.0: power on to power good time: 20ms
[ 0.800478] hub 1-0:1.0: local power source is good
[ 0.802591] nvme nvme0: pci function 0000:3b:00.0
[ 0.805609] usb usb1-port3: DeviceRemovable is changed to 1 according to platform information.
[ 0.805614] usb usb1-port4: DeviceRemovable is changed to 1 according to platform information.
[ 0.805616] usb usb1-port5: DeviceRemovable is changed to 1 according to platform information.
[ 0.805618] hub 1-0:1.0: trying to enable port power on non-switchable hub
[ 0.805840] usb usb2: skipped 1 descriptor after endpoint
[ 0.805846] usb usb2: default language 0x0409
[ 0.805860] usb usb2: udev 1, busnum 2, minor = 128
[ 0.805862] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.08
[ 0.805865] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.805867] usb usb2: Product: xHCI Host Controller
[ 0.805870] usb usb2: Manufacturer: Linux 6.8.0-rc4+ xhci-hcd
[ 0.805872] usb usb2: SerialNumber: 0000:00:14.0
[ 0.805932] usb usb2: usb_probe_device
[ 0.805934] usb usb2: configuration #1 chosen from 1 choice
[ 0.805950] usb usb2: adding 2-0:1.0 (config #1, interface 0)
[ 0.805980] hub 2-0:1.0: usb_probe_interface
[ 0.805982] hub 2-0:1.0: usb_probe_interface - got id
[ 0.805984] hub 2-0:1.0: USB hub found
[ 0.805996] hub 2-0:1.0: 6 ports detected
[ 0.805998] hub 2-0:1.0: standalone hub
[ 0.806000] hub 2-0:1.0: no power switching (usb 1.0)
[ 0.806001] hub 2-0:1.0: individual port over-current protection
[ 0.806003] hub 2-0:1.0: TT requires at most 8 FS bit times (666 ns)
[ 0.806005] hub 2-0:1.0: power on to power good time: 100ms
[ 0.806013] hub 2-0:1.0: local power source is good
[ 0.806207] usb usb2-port1: peered to usb1-port1
[ 0.806349] usb usb2-port2: peered to usb1-port2
[ 0.806487] usb usb2-port3: peered to usb1-port6
[ 0.806622] usb: failed to peer usb2-port4 and usb1-port6 by location (usb2-port4:none) (usb1-port6:usb2-port3)
[ 0.806625] usb usb2-port4: ignore peering failure to usb1-port6 as ports are not connectable
[ 0.806757] usb: failed to peer usb2-port5 and usb1-port6 by location (usb2-port5:none) (usb1-port6:usb2-port3)
[ 0.806759] usb usb2-port5: ignore peering failure to usb1-port6 as ports are not connectable
[ 0.806895] usb: failed to peer usb2-port6 and usb1-port6 by location (usb2-port6:none) (usb1-port6:usb2-port3)
[ 0.806897] usb usb2-port6: ignore peering failure to usb1-port6 as ports are not connectable
[ 0.806905] usb usb2: port-1 no _DSM function 5
[ 0.806908] usb usb2: port-2 no _DSM function 5
[ 0.806911] usb usb2: port-3 no _DSM function 5
[ 0.806913] usb usb2: port-4 no _DSM function 5
[ 0.806916] usb usb2: port-5 no _DSM function 5
[ 0.806918] usb usb2: port-6 no _DSM function 5
[ 0.806920] hub 2-0:1.0: trying to enable port power on non-switchable hub
[ 0.820090] nvme nvme0: 4/0/0 default/read/poll queues
[ 0.825870] usb usb1-port3: status 0101 change 0001
[ 0.825883] usb usb1-port4: status 0101 change 0001
[ 0.825892] usb usb1-port5: status 0101 change 0001
[ 0.825931] nvme0n1: p1 p2 p3 p4
[ 0.930006] hub 1-0:1.0: state 7 ports 12 chg 0038 evt 0000
[ 0.930033] usb usb1-port3: status 0101, change 0000, 12 Mb/s
[ 0.967975] input: DLL075B:01 06CB:76AF Mouse as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-2/i2c-DLL075B:01/0018:06CB:76AF.0001/input/input2
[ 0.968302] input: DLL075B:01 06CB:76AF Touchpad as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-2/i2c-DLL075B:01/0018:06CB:76AF.0001/input/input3
[ 0.968569] hid-generic 0018:06CB:76AF.0001: input,hidraw0: I2C HID v1.00 Mouse [DLL075B:01 06CB:76AF] on i2c-DLL075B:01
[ 1.014033] hub 2-0:1.0: state 7 ports 6 chg 0000 evt 0000
[ 1.014141] hub 2-0:1.0: hub_suspend
[ 1.014156] usb usb2: bus auto-suspend, wakeup 1
[ 1.014178] usb usb2: suspend raced with wakeup event
[ 1.014182] usb usb2: usb auto-resume
[ 1.030080] hub 2-0:1.0: hub_resume
[ 1.058119] usb 1-3: new full-speed USB device number 2 using xhci_hcd
[ 1.058206] hub 2-0:1.0: state 7 ports 6 chg 0000 evt 0000
[ 1.058313] hub 2-0:1.0: hub_suspend
[ 1.058329] usb usb2: bus auto-suspend, wakeup 1
[ 1.058353] usb usb2: suspend raced with wakeup event
[ 1.058358] usb usb2: usb auto-resume
[ 1.074075] hub 2-0:1.0: hub_resume
[ 1.102175] hub 2-0:1.0: state 7 ports 6 chg 0000 evt 0000
[ 1.102292] hub 2-0:1.0: hub_suspend
[ 1.102308] usb usb2: bus auto-suspend, wakeup 1
[ 1.102335] usb usb2: suspend raced with wakeup event
[ 1.102341] usb usb2: usb auto-resume
[ 1.118049] hub 2-0:1.0: hub_resume
[ 1.146140] hub 2-0:1.0: state 7 ports 6 chg 0000 evt 0000
[ 1.146253] hub 2-0:1.0: hub_suspend
[ 1.146276] usb usb2: bus auto-suspend, wakeup 1
[ 1.146303] usb usb2: suspend raced with wakeup event
[ 1.146308] usb usb2: usb auto-resume
[ 1.162091] hub 2-0:1.0: hub_resume
[ 1.190130] hub 2-0:1.0: state 7 ports 6 chg 0000 evt 0000
[ 1.190245] hub 2-0:1.0: hub_suspend
[ 1.190261] usb usb2: bus auto-suspend, wakeup 1
[ 1.190288] usb usb2: suspend raced with wakeup event
[ 1.190293] usb usb2: usb auto-resume
[ 1.206124] hub 2-0:1.0: hub_resume
[ 1.208834] usb 1-3: udev 2, busnum 1, minor = 1
[ 1.208849] usb 1-3: New USB device found, idVendor=0cf3, idProduct=e300, bcdDevice= 0.01
[ 1.208859] usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.209462] usb 1-3: usb_probe_device
[ 1.209474] usb 1-3: configuration #1 chosen from 1 choice
[ 1.211731] usb 1-3: adding 1-3:1.0 (config #1, interface 0)
[ 1.212398] usb 1-3: adding 1-3:1.1 (config #1, interface 1)
[ 1.213005] usb usb1-port4: status 0101, change 0000, 12 Mb/s
[ 1.234135] hub 2-0:1.0: state 7 ports 6 chg 0000 evt 0000
[ 1.234248] hub 2-0:1.0: hub_suspend
[ 1.234265] usb usb2: bus auto-suspend, wakeup 1
[ 1.234293] usb usb2: suspend raced with wakeup event
[ 1.234298] usb usb2: usb auto-resume
[ 1.250085] hub 2-0:1.0: hub_resume
[ 1.274032] tsc: Refined TSC clocksource calibration: 2904.007 MHz
[ 1.274052] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x29dc0c50045, max_idle_ns: 440795208304 ns
[ 1.274127] clocksource: Switched to clocksource tsc
[ 1.278168] hub 2-0:1.0: state 7 ports 6 chg 0000 evt 0000
[ 1.278282] hub 2-0:1.0: hub_suspend
[ 1.278298] usb usb2: bus auto-suspend, wakeup 1
[ 1.278325] usb usb2: suspend raced with wakeup event
[ 1.278330] usb usb2: usb auto-resume
[ 1.294087] hub 2-0:1.0: hub_resume
[ 1.322189] hub 2-0:1.0: state 7 ports 6 chg 0000 evt 0000
[ 1.322302] hub 2-0:1.0: hub_suspend
[ 1.322318] usb usb2: bus auto-suspend, wakeup 1
[ 1.338069] usb 1-4: new full-speed USB device number 3 using xhci_hcd
[ 1.486058] usb 1-4: ep0 maxpacket = 8
[ 1.488149] usb 1-4: skipped 1 descriptor after interface
[ 1.488351] usb 1-4: default language 0x0409
[ 1.488948] usb 1-4: udev 3, busnum 1, minor = 2
[ 1.488960] usb 1-4: New USB device found, idVendor=04f3, idProduct=2234, bcdDevice=11.11
[ 1.488970] usb 1-4: New USB device strings: Mfr=4, Product=14, SerialNumber=0
[ 1.488976] usb 1-4: Product: Touchscreen
[ 1.488982] usb 1-4: Manufacturer: ELAN
[ 1.489581] usb 1-4: usb_probe_device
[ 1.489594] usb 1-4: configuration #1 chosen from 1 choice
[ 1.491166] usb 1-4: adding 1-4:1.0 (config #1, interface 0)
[ 1.491954] usb usb1-port5: status 0101, change 0000, 12 Mb/s
[ 1.618090] usb 1-5: new high-speed USB device number 4 using xhci_hcd
[ 1.818369] usb 1-5: skipped 2 descriptors after configuration
[ 1.818383] usb 1-5: skipped 6 descriptors after interface
[ 1.818391] usb 1-5: skipped 1 descriptor after endpoint
[ 1.818397] usb 1-5: skipped 14 descriptors after endpoint
[ 1.819158] usb 1-5: default language 0x0409
[ 1.827096] usb 1-5: udev 4, busnum 1, minor = 3
[ 1.827111] usb 1-5: New USB device found, idVendor=0c45, idProduct=670c, bcdDevice=56.26
[ 1.827120] usb 1-5: New USB device strings: Mfr=2, Product=1, SerialNumber=0
[ 1.827126] usb 1-5: Product: Integrated_Webcam_HD
[ 1.827132] usb 1-5: Manufacturer: CN09GTFMLOG008C8B7FWA01
[ 1.827749] usb 1-5: usb_probe_device
[ 1.827763] usb 1-5: configuration #1 chosen from 1 choice
[ 1.829776] usb 1-5: adding 1-5:1.0 (config #1, interface 0)
[ 1.833559] usb 1-5: adding 1-5:1.1 (config #1, interface 1)
[ 1.837529] hub 1-0:1.0: state 7 ports 12 chg 0000 evt 0000
[ 1.848157] usbhid 1-4:1.0: usb_probe_interface
[ 1.848161] usbhid 1-4:1.0: usb_probe_interface - got id
[ 1.854806] input: ELAN Touchscreen as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/0003:04F3:2234.0002/input/input5
[ 1.854931] input: ELAN Touchscreen as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/0003:04F3:2234.0002/input/input6
[ 1.854953] input: ELAN Touchscreen as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/0003:04F3:2234.0002/input/input7
[ 1.854957] usbhid 1-4:1.0: looking for a minor, starting at 0
[ 1.855138] hid-generic 0003:04F3:2234.0002: input,hiddev0,hidraw1: USB HID v1.10 Device [ELAN Touchscreen] on usb-0000:00:14.0-4/input0
[ 1.855173] usbcore: registered new interface driver usbhid
[ 1.855174] usbhid: USB HID core driver
[ 1.877072] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log.
[ 1.877105] device-mapper: uevent: version 1.0.3
[ 1.877267] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@xxxxxxxxxx
[ 18.148313] PM: Image not found (code -22)
[ 18.294087] EXT4-fs (dm-0): mounted filesystem 32e29882-d94d-4a92-9ee4-4d03002bfa29 ro with ordered data mode. Quota mode: none.
[ 18.319091] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist.
[ 18.949531] systemd[1]: Inserted module 'autofs4'
[ 18.995390] systemd[1]: systemd 255.3-2 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified)
[ 18.995407] systemd[1]: Detected architecture x86-64.
[ 18.996582] systemd[1]: Hostname set to <abreu>.
[ 19.202644] systemd[1]: Queued start job for default target graphical.target.
[ 19.247149] systemd[1]: Created slice system-getty.slice - Slice /system/getty.
[ 19.247578] systemd[1]: Created slice system-modprobe.slice - Slice /system/modprobe.
[ 19.247982] systemd[1]: Created slice system-systemd\x2dcryptsetup.slice - Encrypted Volume Units Service Slice.
[ 19.248378] systemd[1]: Created slice system-systemd\x2dfsck.slice - Slice /system/systemd-fsck.
[ 19.248675] systemd[1]: Created slice user.slice - User and Session Slice.
[ 19.248768] systemd[1]: Started systemd-ask-password-console.path - Dispatch Password Requests to Console Directory Watch.
[ 19.248838] systemd[1]: Started systemd-ask-password-wall.path - Forward Password Requests to Wall Directory Watch.
[ 19.249071] systemd[1]: Set up automount proc-sys-fs-binfmt_misc.automount - Arbitrary Executable File Formats File System Automount Point.
[ 19.249097] systemd[1]: Expecting device dev-disk-by\x2ddiskseq-1\x2dpart4.device - /dev/disk/by-diskseq/1-part4...
[ 19.249105] systemd[1]: Expecting device dev-disk-by\x2duuid-2d23fd4c\x2d5d03\x2d4e1a\x2d8a42\x2d0e859d1f00d8.device - /dev/disk/by-uuid/2d23fd4c-5d03-4e1a-8a42-0e859d1f00d8...
[ 19.249114] systemd[1]: Expecting device dev-disk-by\x2duuid-61be8f50\x2d69c5\x2d49a5\x2dbcad\x2d3f4521e9c7b5.device - /dev/disk/by-uuid/61be8f50-69c5-49a5-bcad-3f4521e9c7b5...
[ 19.249123] systemd[1]: Expecting device dev-disk-by\x2duuid-96BD\x2d5653.device - /dev/disk/by-uuid/96BD-5653...
[ 19.249147] systemd[1]: Reached target integritysetup.target - Local Integrity Protected Volumes.
[ 19.249173] systemd[1]: Reached target nss-user-lookup.target - User and Group Name Lookups.
[ 19.249186] systemd[1]: Reached target paths.target - Path Units.
[ 19.249207] systemd[1]: Reached target remote-fs.target - Remote File Systems.
[ 19.249222] systemd[1]: Reached target slices.target - Slice Units.
[ 19.249257] systemd[1]: Reached target veritysetup.target - Local Verity Protected Volumes.
[ 19.251056] systemd[1]: Listening on systemd-coredump.socket - Process Core Dump Socket.
[ 19.251191] systemd[1]: Listening on systemd-fsckd.socket - fsck to fsckd communication Socket.
[ 19.251276] systemd[1]: Listening on systemd-initctl.socket - initctl Compatibility Named Pipe.
[ 19.251445] systemd[1]: Listening on systemd-journald-dev-log.socket - Journal Socket (/dev/log).
[ 19.251622] systemd[1]: Listening on systemd-journald.socket - Journal Socket.
[ 19.251672] systemd[1]: systemd-pcrextend.socket - TPM2 PCR Extension (Varlink) was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
[ 19.252013] systemd[1]: Listening on systemd-udevd-control.socket - udev Control Socket.
[ 19.252159] systemd[1]: Listening on systemd-udevd-kernel.socket - udev Kernel Socket.
[ 19.253740] systemd[1]: Mounting dev-hugepages.mount - Huge Pages File System...
[ 19.254982] systemd[1]: Mounting dev-mqueue.mount - POSIX Message Queue File System...
[ 19.256809] systemd[1]: Mounting sys-kernel-debug.mount - Kernel Debug File System...
[ 19.262055] systemd[1]: Mounting sys-kernel-tracing.mount - Kernel Trace File System...
[ 19.264718] systemd[1]: Starting keyboard-setup.service - Set the console keyboard layout...
[ 19.274184] systemd[1]: Starting kmod-static-nodes.service - Create List of Static Device Nodes...
[ 19.280184] systemd[1]: Starting modprobe@configfs.service - Load Kernel Module configfs...
[ 19.282368] systemd[1]: Starting modprobe@dm_mod.service - Load Kernel Module dm_mod...
[ 19.289326] systemd[1]: Starting modprobe@drm.service - Load Kernel Module drm...
[ 19.292106] systemd[1]: Starting modprobe@efi_pstore.service - Load Kernel Module efi_pstore...
[ 19.298747] systemd[1]: Starting modprobe@fuse.service - Load Kernel Module fuse...
[ 19.299811] systemd[1]: Starting modprobe@loop.service - Load Kernel Module loop...
[ 19.299956] systemd[1]: systemd-fsck-root.service - File System Check on Root Device was skipped because of an unmet condition check (ConditionPathExists=!/run/initramfs/fsck-root).
[ 19.303732] systemd[1]: Starting systemd-journald.service - Journal Service...
[ 19.305089] pstore: Using crash dump compression: deflate
[ 19.310244] systemd[1]: Starting systemd-modules-load.service - Load Kernel Modules...
[ 19.310273] systemd[1]: systemd-pcrmachine.service - TPM2 PCR Machine ID Measurement was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
[ 19.312508] pstore: Registered efi_pstore as persistent store backend
[ 19.314831] loop: module loaded
[ 19.315348] systemd[1]: Starting systemd-remount-fs.service - Remount Root and Kernel File Systems...
[ 19.315438] systemd[1]: systemd-tpm2-setup-early.service - TPM2 SRK Setup (Early) was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
[ 19.318433] systemd[1]: Starting systemd-udev-trigger.service - Coldplug All udev Devices...
[ 19.320676] systemd[1]: Mounted dev-hugepages.mount - Huge Pages File System.
[ 19.320844] systemd[1]: Mounted dev-mqueue.mount - POSIX Message Queue File System.
[ 19.320986] systemd[1]: Mounted sys-kernel-debug.mount - Kernel Debug File System.
[ 19.321128] systemd[1]: Mounted sys-kernel-tracing.mount - Kernel Trace File System.
[ 19.321450] systemd[1]: Finished keyboard-setup.service - Set the console keyboard layout.
[ 19.321809] systemd[1]: Finished kmod-static-nodes.service - Create List of Static Device Nodes.
[ 19.322251] systemd[1]: modprobe@configfs.service: Deactivated successfully.
[ 19.322435] systemd[1]: Finished modprobe@configfs.service - Load Kernel Module configfs.
[ 19.322841] systemd[1]: modprobe@dm_mod.service: Deactivated successfully.
[ 19.323031] systemd[1]: Finished modprobe@dm_mod.service - Load Kernel Module dm_mod.
[ 19.323426] systemd[1]: modprobe@drm.service: Deactivated successfully.
[ 19.323605] systemd[1]: Finished modprobe@drm.service - Load Kernel Module drm.
[ 19.323978] systemd[1]: modprobe@efi_pstore.service: Deactivated successfully.
[ 19.324141] systemd[1]: Finished modprobe@efi_pstore.service - Load Kernel Module efi_pstore.
[ 19.324491] systemd[1]: modprobe@fuse.service: Deactivated successfully.
[ 19.324671] systemd[1]: Finished modprobe@fuse.service - Load Kernel Module fuse.
[ 19.325008] systemd[1]: modprobe@loop.service: Deactivated successfully.
[ 19.325164] systemd[1]: Finished modprobe@loop.service - Load Kernel Module loop.
[ 19.328840] systemd[1]: Mounting sys-fs-fuse-connections.mount - FUSE Control File System...
[ 19.330249] systemd[1]: Mounting sys-kernel-config.mount - Kernel Configuration File System...
[ 19.332122] systemd[1]: systemd-repart.service - Repartition Root Disk was skipped because no trigger condition checks were met.
[ 19.335208] systemd-journald[487]: Collecting audit messages is disabled.
[ 19.336032] systemd[1]: Starting systemd-tmpfiles-setup-dev-early.service - Create Static Device Nodes in /dev gracefully...
[ 19.341480] lp: driver loaded but no devices found
[ 19.343670] systemd[1]: Mounted sys-fs-fuse-connections.mount - FUSE Control File System.
[ 19.343848] systemd[1]: Mounted sys-kernel-config.mount - Kernel Configuration File System.
[ 19.345627] ppdev: user-space parallel port driver
[ 19.347933] EXT4-fs (dm-0): re-mounted 32e29882-d94d-4a92-9ee4-4d03002bfa29 r/w. Quota mode: none.
[ 19.350602] systemd[1]: Finished systemd-remount-fs.service - Remount Root and Kernel File Systems.
[ 19.352456] systemd[1]: systemd-hwdb-update.service - Rebuild Hardware Database was skipped because of an unmet condition check (ConditionNeedsUpdate=/etc).
[ 19.352523] systemd[1]: systemd-pstore.service - Platform Persistent Storage Archival was skipped because of an unmet condition check (ConditionDirectoryNotEmpty=/sys/fs/pstore).
[ 19.358188] systemd[1]: Starting systemd-random-seed.service - Load/Save OS Random Seed...
[ 19.358230] systemd[1]: systemd-tpm2-setup.service - TPM2 SRK Setup was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
[ 19.364255] systemd[1]: Finished systemd-modules-load.service - Load Kernel Modules.
[ 19.366093] systemd[1]: Starting systemd-sysctl.service - Apply Kernel Variables...
[ 19.366468] systemd[1]: Finished systemd-tmpfiles-setup-dev-early.service - Create Static Device Nodes in /dev gracefully.
[ 19.366665] systemd[1]: systemd-sysusers.service - Create System Users was skipped because no trigger condition checks were met.
[ 19.372892] systemd[1]: Starting systemd-tmpfiles-setup-dev.service - Create Static Device Nodes in /dev...
[ 19.382483] systemd[1]: Finished systemd-random-seed.service - Load/Save OS Random Seed.
[ 19.387424] systemd[1]: Finished systemd-sysctl.service - Apply Kernel Variables.
[ 19.394891] systemd[1]: Finished systemd-tmpfiles-setup-dev.service - Create Static Device Nodes in /dev.
[ 19.395042] systemd[1]: Reached target local-fs-pre.target - Preparation for Local File Systems.
[ 19.396694] systemd[1]: Starting systemd-udevd.service - Rule-based Manager for Device Events and Files...
[ 19.417043] systemd[1]: Started systemd-journald.service - Journal Service.
[ 19.436371] systemd-journald[487]: Received client request to flush runtime journal.
[ 19.454141] systemd-journald[487]: /var/log/journal/16ae67b9dca94ecebbc8ec78ab24e074/system.journal: Journal file uses a different sequence number ID, rotating.
[ 19.454153] systemd-journald[487]: Rotating system journal.
[ 19.613513] ACPI: AC: AC Adapter [AC] (off-line)
[ 19.645441] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input9
[ 19.651768] wmi_bus wmi_bus-PNP0C14:01: WQBC data block query control method not found
[ 19.653347] intel_pmc_core INT33A1:00: initialized
[ 19.653872] input: Intel HID events as /devices/platform/INT33D5:00/input/input10
[ 19.658680] Consider using thermal netlink events interface
[ 19.702597] intel-hid INT33D5:00: platform supports 5 button array
[ 19.706269] usb 1-3: usb auto-suspend, wakeup 0
[ 19.714248] input: Intel HID 5 button array as /devices/platform/INT33D5:00/input/input11
[ 19.729903] ACPI: button: Lid Switch [LID0]
[ 19.730128] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input12
[ 19.743724] input: Intel Virtual Buttons as /devices/pci0000:00/0000:00:1f.0/PNP0C09:00/INT33D6:00/input/input13
[ 19.745568] ACPI: button: Power Button [PBTN]
[ 19.745630] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input14
[ 19.745891] ACPI: button: Sleep Button [SBTN]
[ 19.746231] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input16
[ 19.746344] ACPI: button: Power Button [PWRF]
[ 19.753775] input: DLL075B:01 06CB:76AF Mouse as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-2/i2c-DLL075B:01/0018:06CB:76AF.0001/input/input17
[ 19.753950] input: DLL075B:01 06CB:76AF Touchpad as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-2/i2c-DLL075B:01/0018:06CB:76AF.0001/input/input18
[ 19.754654] hid-multitouch 0018:06CB:76AF.0001: input,hidraw0: I2C HID v1.00 Mouse [DLL075B:01 06CB:76AF] on i2c-DLL075B:01
[ 19.796293] Adding 8387904k swap on /dev/nvme0n1p4. Priority:-2 extents:1 across:8387904k SS
[ 19.842947] usbhid 1-4:1.0: removing 0 minor
[ 19.846450] ACPI: battery: Slot [BAT0] (battery present)
[ 19.854859] input: ELAN Touchscreen as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/0003:04F3:2234.0002/input/input20
[ 19.858793] input: ELAN Touchscreen UNKNOWN as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/0003:04F3:2234.0002/input/input21
[ 19.861300] input: ELAN Touchscreen UNKNOWN as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/0003:04F3:2234.0002/input/input22
[ 19.862020] usbhid 1-4:1.0: looking for a minor, starting at 0
[ 19.875964] hid-multitouch 0003:04F3:2234.0002: input,hiddev0,hidraw1: USB HID v1.10 Device [ELAN Touchscreen] on usb-0000:00:14.0-4/input0
[ 19.961554] EXT4-fs (nvme0n1p2): mounted filesystem 2d23fd4c-5d03-4e1a-8a42-0e859d1f00d8 r/w with ordered data mode. Quota mode: none.
[ 19.975207] mc: Linux media interface: v0.10
[ 19.979959] mei_me 0000:00:16.0: enabling device (0000 -> 0002)
[ 20.151676] input: PC Speaker as /devices/platform/pcspkr/input/input24
[ 20.185836] videodev: Linux video capture interface: v2.00
[ 20.190437] Bluetooth: Core ver 2.22
[ 20.190455] NET: Registered PF_BLUETOOTH protocol family
[ 20.190457] Bluetooth: HCI device and connection manager initialized
[ 20.190461] Bluetooth: HCI socket layer initialized
[ 20.190464] Bluetooth: L2CAP socket layer initialized
[ 20.190469] Bluetooth: SCO socket layer initialized
[ 20.198798] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 20.199077] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 20.199308] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600'
[ 20.202332] cfg80211: loaded regulatory.db is malformed or signature is missing/invalid
[ 20.208695] iTCO_vendor_support: vendor-support=0
[ 20.223183] iTCO_wdt iTCO_wdt: Found a Intel PCH TCO device (Version=4, TCOBASE=0x0400)
[ 20.240543] iTCO_wdt iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 20.262868] proc_thermal 0000:00:04.0: enabling device (0000 -> 0002)
[ 20.278761] RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer
[ 20.278766] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[ 20.278767] RAPL PMU: hw unit of domain package 2^-14 Joules
[ 20.278768] RAPL PMU: hw unit of domain dram 2^-14 Joules
[ 20.278769] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[ 20.278770] RAPL PMU: hw unit of domain psys 2^-14 Joules
[ 20.318238] hub 1-0:1.0: state 7 ports 12 chg 0000 evt 0000
[ 20.366119] usb 1-3: usb auto-resume
[ 20.366657] hub 1-0:1.0: state 7 ports 12 chg 0000 evt 0008
[ 20.382083] intel_rapl_common: Found RAPL domain package
[ 20.382094] intel_rapl_common: Found RAPL domain dram
[ 20.426545] audit: type=1400 audit(1708146606.555:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=597 comm="apparmor_parser"
[ 20.426552] audit: type=1400 audit(1708146606.555:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=597 comm="apparmor_parser"
[ 20.427656] audit: type=1400 audit(1708146606.563:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=596 comm="apparmor_parser"
[ 20.434033] usb 1-3: Waited 0ms for CONNECT
[ 20.434039] usb 1-3: finish resume
[ 20.434146] btusb 1-3:1.0: usb_probe_interface
[ 20.434149] btusb 1-3:1.0: usb_probe_interface - got id
[ 20.443566] audit: type=1400 audit(1708146606.579:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=603 comm="apparmor_parser"
[ 20.443571] audit: type=1400 audit(1708146606.579:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=603 comm="apparmor_parser"
[ 20.443573] audit: type=1400 audit(1708146606.579:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=603 comm="apparmor_parser"
[ 20.446063] Bluetooth: hci0: using rampatch file: qca/rampatch_usb_00000302.bin
[ 20.446068] Bluetooth: hci0: QCA: patch rome 0x302 build 0x3e8, firmware rome 0x302 build 0x111
[ 20.451638] audit: type=1400 audit(1708146606.587:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/ipsec/charon" pid=605 comm="apparmor_parser"
[ 20.452535] usbcore: registered new interface driver btusb
[ 20.493578] audit: type=1400 audit(1708146606.627:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/ipsec/stroke" pid=607 comm="apparmor_parser"
[ 20.497902] audit: type=1400 audit(1708146606.631:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=598 comm="apparmor_parser"
[ 20.497907] audit: type=1400 audit(1708146606.635:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=598 comm="apparmor_parser"
[ 20.542710] snd_hda_intel 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040380
[ 20.542736] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002)
[ 20.599919] snd_hda_intel 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040380
[ 20.603328] uvcvideo 1-5:1.0: usb_probe_interface
[ 20.603338] uvcvideo 1-5:1.0: usb_probe_interface - got id
[ 20.608160] snd_hda_intel 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040380
[ 20.608612] usb 1-5: Found UVC 1.00 device Integrated_Webcam_HD (0c45:670c)
[ 20.608682] snd_hda_intel 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040380
[ 20.744283] snd_hda_intel 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040380
[ 20.745102] usbcore: registered new interface driver uvcvideo
[ 20.867297] Bluetooth: hci0: using NVM file: qca/nvm_usb_00000302.bin
[ 20.899581] Bluetooth: hci0: HCI Enhanced Setup Synchronous Connection command is advertised, but not supported.
[ 21.063277] Console: switching to colour dummy device 80x25
[ 21.068048] i915 0000:00:02.0: vgaarb: deactivate vga console
[ 21.077086] i915 0000:00:02.0: vgaarb: VGA decodes changed: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 21.078692] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4)
[ 21.122168] snd_hda_intel 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040380
[ 21.213010] intel_rapl_common: Found RAPL domain package
[ 21.213015] intel_rapl_common: Found RAPL domain core
[ 21.213017] intel_rapl_common: Found RAPL domain uncore
[ 21.213018] intel_rapl_common: Found RAPL domain dram
[ 21.213019] intel_rapl_common: Found RAPL domain psys
[ 21.226073] snd_hda_intel 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040380
[ 21.231275] input: Dell WMI hotkeys as /devices/platform/PNP0C14:01/wmi_bus/wmi_bus-PNP0C14:01/9DBB5994-A997-11DA-B012-B622A1EF5492/input/input25
[ 21.232105] snd_hda_intel 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040380
[ 21.266638] snd_hda_intel 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040380
[ 21.268492] mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_ops [i915])
[ 21.278978] snd_hda_intel 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040380
[ 21.311204] snd_hda_intel 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040380
[ 21.367328] ath10k_pci 0000:3a:00.0: enabling device (0000 -> 0002)
[ 21.413628] ath10k_pci 0000:3a:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0
[ 21.434778] snd_soc_skl 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040380
[ 21.489690] snd_soc_avs 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040380
[ 21.551956] snd_hda_intel 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040380
[ 21.556753] snd_soc_skl 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040380
[ 21.556766] snd_soc_avs 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040380
[ 21.592783] sof-audio-pci-intel-skl 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040380
[ 21.710026] ath10k_pci 0000:3a:00.0: qca6174 hw3.2 target 0x05030000 chip_id 0x00340aff sub 1a56:1535
[ 21.710038] ath10k_pci 0000:3a:00.0: kconfig debug 0 debugfs 0 tracing 0 dfs 0 testmode 0
[ 21.710847] ath10k_pci 0000:3a:00.0: firmware ver WLAN.RM.4.4.1-00288- api 6 features wowlan,ignore-otp,mfp crc32 bf907c7c
[ 21.817932] ath10k_pci 0000:3a:00.0: board_file api 2 bmi_id N/A crc32 d2863f91
[ 21.923378] ath10k_pci 0000:3a:00.0: htt-ver 3.87 wmi-op 4 htt-op 3 cal otp max-sta 32 raw 0 hwcrypto 1
[ 22.015079] ath: EEPROM regdomain: 0x6c
[ 22.015086] ath: EEPROM indicates we should expect a direct regpair map
[ 22.015089] ath: Country alpha2 being used: 00
[ 22.015091] ath: Regpair used: 0x6c
[ 22.027157] ath10k_pci 0000:3a:00.0 wlp58s0: renamed from wlan0
[ 22.102108] NET: Registered PF_QIPCRTR protocol family
[ 22.390935] Initializing XFRM netlink socket
[ 22.439058] PPP generic driver version 2.4.2
[ 22.557941] IPsec XFRM device driver
[ 22.640821] NET: Registered PF_PPPOX protocol family
[ 22.925337] l2tp_core: L2TP core driver, V2.0
[ 22.927780] l2tp_netlink: L2TP netlink interface
[ 22.935962] l2tp_ppp: PPPoL2TP kernel driver, V2.0
[ 23.016979] i915 0000:00:02.0: [drm] [ENCODER:102:DDI B/PHY B] is disabled/in DSI mode with an ungated DDI clock, gate it
[ 23.021242] i915 0000:00:02.0: [drm] [ENCODER:113:DDI C/PHY C] is disabled/in DSI mode with an ungated DDI clock, gate it
[ 23.060181] [drm] Initialized i915 1.6.0 20230929 for 0000:00:02.0 on minor 0
[ 23.066616] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 23.070513] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input26
[ 23.070663] snd_hda_intel 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040380
[ 23.070724] i915 display info: display version: 9
[ 23.070726] i915 display info: cursor_needs_physical: no
[ 23.070727] i915 display info: has_cdclk_crawl: no
[ 23.070729] i915 display info: has_cdclk_squash: no
[ 23.070730] i915 display info: has_ddi: yes
[ 23.070731] i915 display info: has_dp_mst: yes
[ 23.070732] i915 display info: has_dsb: no
[ 23.070733] i915 display info: has_fpga_dbg: yes
[ 23.070735] i915 display info: has_gmch: no
[ 23.070736] i915 display info: has_hotplug: yes
[ 23.070737] i915 display info: has_hti: no
[ 23.070738] i915 display info: has_ipc: yes
[ 23.070739] i915 display info: has_overlay: no
[ 23.070740] i915 display info: has_psr: yes
[ 23.070742] i915 display info: has_psr_hw_tracking: yes
[ 23.070743] i915 display info: overlay_needs_physical: no
[ 23.070744] i915 display info: supports_tv: no
[ 23.070745] i915 display info: has_hdcp: yes
[ 23.070746] i915 display info: has_dmc: yes
[ 23.070748] i915 display info: has_dsc: no
[ 23.070824] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[ 23.093236] fbcon: i915drmfb (fb0) is primary device
[ 23.109497] Console: switching to colour frame buffer device 200x56
[ 23.129773] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device
[ 23.203498] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC3246: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[ 23.203504] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 23.203507] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[ 23.203510] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 23.203511] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 23.203513] snd_hda_codec_realtek hdaudioC0D0: Headset Mic=0x19
[ 23.203515] snd_hda_codec_realtek hdaudioC0D0: Headphone Mic=0x1a
[ 23.203517] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x12
[ 23.269933] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1f.3/sound/card0/input27
[ 23.270001] input: HDA Intel PCH Headphone Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input28
[ 23.270056] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input29
[ 23.270126] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input30
[ 23.270481] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input31
[ 23.977857] usb 1-5: usb auto-suspend, wakeup 0
[ 24.091754] hub 1-0:1.0: state 7 ports 12 chg 0000 evt 0000
[ 24.138018] usb 1-5: usb auto-resume
[ 24.138015] hub 1-0:1.0: state 7 ports 12 chg 0000 evt 0020
[ 24.205878] usb 1-5: Waited 0ms for CONNECT
[ 24.205891] usb 1-5: finish resume
[ 24.212763] usb 1-5: disable remote wakeup, status -32
[ 25.992790] rfkill: input handler disabled
[ 27.521846] usb 1-5: usb auto-suspend, wakeup 0
[ 27.928184] wlp58s0: 80 MHz not supported, disabling VHT
[ 27.982130] wlp58s0: authenticate with e8:48:b8:e1:89:ab (local address=9c:b6:d0:d1:6a:b1)
[ 27.982135] wlp58s0: send auth to e8:48:b8:e1:89:ab (try 1/3)
[ 27.985129] wlp58s0: authenticated
[ 27.985844] wlp58s0: associate with e8:48:b8:e1:89:ab (try 1/3)
[ 27.989469] wlp58s0: RX AssocResp from e8:48:b8:e1:89:ab (capab=0x421 status=0 aid=1)
[ 27.992012] wlp58s0: associated
[ 30.248072] systemd-journald[487]: /var/log/journal/16ae67b9dca94ecebbc8ec78ab24e074/user-5272.journal: Journal file uses a different sequence number ID, rotating.
[ 30.669416] rfkill: input handler enabled
[ 32.986669] hub 1-0:1.0: state 7 ports 12 chg 0000 evt 0000
[ 33.033902] usb 1-5: usb auto-resume
[ 33.037139] hub 1-0:1.0: state 7 ports 12 chg 0000 evt 0020
[ 33.101882] usb 1-5: Waited 0ms for CONNECT
[ 33.101895] usb 1-5: finish resume
[ 33.103359] usb 1-5: disable remote wakeup, status -32
[ 33.782126] rfkill: input handler disabled
[ 35.621877] usb 1-5: usb auto-suspend, wakeup 0
[ 4394.773851] wlp58s0: deauthenticating from e8:48:b8:e1:89:ab by local choice (Reason: 3=DEAUTH_LEAVING)
[ 4399.289292] PM: suspend entry (deep)
[ 4399.296649] Filesystems sync: 0.007 seconds
[ 4399.299680] Freezing user space processes
[ 4399.302276] Freezing user space processes completed (elapsed 0.002 seconds)
[ 4399.302281] OOM killer disabled.
[ 4399.302281] Freezing remaining freezable tasks
[ 4399.303600] Freezing remaining freezable tasks completed (elapsed 0.001 seconds)
[ 4399.303649] printk: Suspending console(s) (use no_console_suspend to debug)
[ 4399.317285] usb 1-3: usb suspend, wakeup 0
[ 4399.317406] usb usb2: usb auto-resume
[ 4399.317663] usb 1-4: usb suspend, wakeup 0
[ 4399.317674] hub 2-0:1.0: hub_resume
[ 4399.317813] hub 1-0:1.0: hub_suspend
[ 4399.318732] usb usb1: bus suspend, wakeup 0
[ 4399.348983] hub 2-0:1.0: hub_suspend
[ 4399.348990] usb usb2: bus suspend, wakeup 0
[ 4399.856673] ACPI: EC: interrupt blocked
[ 4399.859564] xhci_hcd 0000:00:14.0: wakeup: 1
[ 4399.888949] xhci_hcd 0000:00:14.0: --> PCI D3hot
[ 4399.889013] ACPI: PM: Preparing to enter system sleep state S3
[ 4399.899795] ACPI: EC: event blocked
[ 4399.899797] ACPI: EC: EC stopped
[ 4399.899798] ACPI: PM: Saving platform NVS memory
[ 4399.901901] Disabling non-boot CPUs ...
[ 4399.904112] smpboot: CPU 1 is now offline
[ 4399.906267] smpboot: CPU 2 is now offline
[ 4399.909947] smpboot: CPU 3 is now offline
[ 4399.917116] ACPI: PM: Low-level resume complete
[ 4399.917159] ACPI: EC: EC started
[ 4399.917160] ACPI: PM: Restoring platform NVS memory
[ 4399.919079] Enabling non-boot CPUs ...
[ 4399.919105] smpboot: Booting Node 0 Processor 1 APIC 0x2
[ 4399.919833] CPU1 is up
[ 4399.919850] smpboot: Booting Node 0 Processor 2 APIC 0x1
[ 4399.920613] CPU2 is up
[ 4399.920631] smpboot: Booting Node 0 Processor 3 APIC 0x3
[ 4399.921314] CPU3 is up
[ 4399.924273] ACPI: PM: Waking up from system sleep state S3
[ 4399.962155] ACPI: EC: interrupt unblocked
[ 4399.983864] ACPI: EC: event unblocked
[ 4399.985545] usb usb1: usb resume
[ 4399.985692] usb usb2: usb resume
[ 4399.985716] hub 2-0:1.0: hub_resume
[ 4399.995904] nvme nvme0: 4/0/0 default/read/poll queues
[ 4399.996596] hub 1-0:1.0: hub_resume
[ 4399.996701] usb usb1-port3: status 0101 change 0001
[ 4399.996784] usb usb1-port4: status 0101 change 0001
[ 4399.996852] usb usb1-port5: status 0101 change 0001
[ 4400.007841] i915 0000:00:02.0: [drm] [ENCODER:94:DDI A/PHY A] is disabled/in DSI mode with an ungated DDI clock, gate it
[ 4400.010423] i915 0000:00:02.0: [drm] [ENCODER:102:DDI B/PHY B] is disabled/in DSI mode with an ungated DDI clock, gate it
[ 4400.063873] i915 0000:00:02.0: [drm] [ENCODER:113:DDI C/PHY C] is disabled/in DSI mode with an ungated DDI clock, gate it
[ 4400.125232] usb 1-4: Waited 0ms for CONNECT
[ 4400.125232] usb 1-5: Waited 0ms for CONNECT
[ 4400.125237] usb 1-5: finish reset-resume
[ 4400.125238] usb 1-4: finish reset-resume
[ 4400.125238] usb 1-3: Waited 0ms for CONNECT
[ 4400.125240] usb 1-3: finish reset-resume
[ 4400.213238] atkbd serio0: Failed to deactivate keyboard on isa0060/serio0
[ 4400.253528] usb 1-4: reset full-speed USB device number 3 using xhci_hcd
[ 4400.529516] usb 1-3: reset full-speed USB device number 2 using xhci_hcd
[ 4400.678650] btusb 1-3:1.0: no reset_resume for driver btusb?
[ 4400.678654] btusb 1-3:1.1: no reset_resume for driver btusb?
[ 4400.678656] btusb 1-3:1.0: forced unbind
[ 4400.805431] usb 1-5: reset high-speed USB device number 4 using xhci_hcd
[ 4401.019349] OOM killer enabled.
[ 4401.019351] Restarting tasks ...
[ 4401.019379] hub 2-0:1.0: state 7 ports 6 chg 0000 evt 0000
[ 4401.019379] hub 1-0:1.0: state 7 ports 12 chg 0000 evt 0000
[ 4401.023510] hub 2-0:1.0: hub_suspend
[ 4401.023528] usb usb2: bus auto-suspend, wakeup 1
[ 4401.036003] done.
[ 4401.036017] random: crng reseeded on system resumption
[ 4401.104666] PM: suspend exit
[ 4401.182522] Process accounting resumed
[ 4401.222616] btusb 1-3:1.0: usb_probe_interface
[ 4401.222637] btusb 1-3:1.0: usb_probe_interface - got id
[ 4401.224162] Bluetooth: hci0: using rampatch file: qca/rampatch_usb_00000302.bin
[ 4401.224167] Bluetooth: hci0: QCA: patch rome 0x302 build 0x3e8, firmware rome 0x302 build 0x111
[ 4401.367342] mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_ops [i915])
[ 4401.582571] Bluetooth: hci0: using NVM file: qca/nvm_usb_00000302.bin
[ 4401.610936] Bluetooth: hci0: HCI Enhanced Setup Synchronous Connection command is advertised, but not supported.
[ 4403.541245] usb 1-5: usb auto-suspend, wakeup 0
[ 4406.164588] wlp58s0: 80 MHz not supported, disabling VHT
[ 4406.218253] wlp58s0: authenticate with e8:48:b8:e1:89:ab (local address=9c:b6:d0:d1:6a:b1)
[ 4406.218259] wlp58s0: send auth to e8:48:b8:e1:89:ab (try 1/3)
[ 4406.220922] wlp58s0: authenticated
[ 4406.221228] wlp58s0: associate with e8:48:b8:e1:89:ab (try 1/3)
[ 4406.224854] wlp58s0: RX AssocResp from e8:48:b8:e1:89:ab (capab=0x421 status=0 aid=1)
[ 4406.228107] wlp58s0: associated
[ 4864.288896] wlp58s0: deauthenticating from e8:48:b8:e1:89:ab by local choice (Reason: 3=DEAUTH_LEAVING)
[ 4868.383987] PM: suspend entry (deep)
[ 4868.390625] Filesystems sync: 0.006 seconds
[ 4868.397753] Freezing user space processes
[ 4868.401470] Freezing user space processes completed (elapsed 0.003 seconds)
[ 4868.401477] OOM killer disabled.
[ 4868.401478] Freezing remaining freezable tasks
[ 4868.403068] Freezing remaining freezable tasks completed (elapsed 0.001 seconds)
[ 4868.403180] printk: Suspending console(s) (use no_console_suspend to debug)
[ 4868.417257] usb 1-4: usb suspend, wakeup 0
[ 4868.417318] usb 1-3: usb suspend, wakeup 0
[ 4868.417444] hub 1-0:1.0: hub_suspend
[ 4868.417490] usb usb2: usb auto-resume
[ 4868.417531] hub 2-0:1.0: hub_resume
[ 4868.417540] usb usb1: bus suspend, wakeup 0
[ 4868.444344] hub 2-0:1.0: hub_suspend
[ 4868.444365] usb usb2: bus suspend, wakeup 0
[ 4868.952312] ACPI: EC: interrupt blocked
[ 4868.955894] xhci_hcd 0000:00:14.0: wakeup: 1
[ 4868.988450] xhci_hcd 0000:00:14.0: --> PCI D3hot
[ 4868.988607] ACPI: PM: Preparing to enter system sleep state S3
[ 4869.000948] ACPI: EC: event blocked
[ 4869.000952] ACPI: EC: EC stopped
[ 4869.000954] ACPI: PM: Saving platform NVS memory
[ 4869.004329] Disabling non-boot CPUs ...
[ 4869.006297] smpboot: CPU 1 is now offline
[ 4869.009413] smpboot: CPU 2 is now offline
[ 4869.012881] smpboot: CPU 3 is now offline
[ 4869.021557] ACPI: PM: Low-level resume complete
[ 4869.021601] ACPI: EC: EC started
[ 4869.021602] ACPI: PM: Restoring platform NVS memory
[ 4869.023521] Enabling non-boot CPUs ...
[ 4869.023547] smpboot: Booting Node 0 Processor 1 APIC 0x2
[ 4869.024276] CPU1 is up
[ 4869.024293] smpboot: Booting Node 0 Processor 2 APIC 0x1
[ 4869.025054] CPU2 is up
[ 4869.025071] smpboot: Booting Node 0 Processor 3 APIC 0x3
[ 4869.025749] CPU3 is up
[ 4869.028741] ACPI: PM: Waking up from system sleep state S3
[ 4869.079650] ACPI: EC: interrupt unblocked
[ 4869.102188] ACPI: EC: event unblocked
[ 4869.103331] usb usb2: usb resume
[ 4869.103331] usb usb1: usb resume
[ 4869.103370] hub 2-0:1.0: hub_resume
[ 4869.113190] nvme nvme0: 4/0/0 default/read/poll queues
[ 4869.114356] hub 1-0:1.0: hub_resume
[ 4869.114373] usb usb1-port3: status 0101 change 0001
[ 4869.114382] usb usb1-port4: status 0101 change 0001
[ 4869.114389] usb usb1-port5: status 0101 change 0001
[ 4869.123202] i915 0000:00:02.0: [drm] [ENCODER:94:DDI A/PHY A] is disabled/in DSI mode with an ungated DDI clock, gate it
[ 4869.143204] i915 0000:00:02.0: [drm] [ENCODER:102:DDI B/PHY B] is disabled/in DSI mode with an ungated DDI clock, gate it
[ 4869.159210] i915 0000:00:02.0: [drm] [ENCODER:113:DDI C/PHY C] is disabled/in DSI mode with an ungated DDI clock, gate it
[ 4869.240639] usb 1-4: Waited 0ms for CONNECT
[ 4869.240644] usb 1-4: finish reset-resume
[ 4869.240673] usb 1-5: Waited 0ms for CONNECT
[ 4869.240674] usb 1-3: Waited 0ms for CONNECT
[ 4869.240676] usb 1-3: finish reset-resume
[ 4869.240676] usb 1-5: finish reset-resume
[ 4869.364647] atkbd serio0: Failed to deactivate keyboard on isa0060/serio0
[ 4869.368856] usb 1-4: reset full-speed USB device number 3 using xhci_hcd
[ 4869.532035] atkbd_receive_byte: 21 callbacks suppressed
[ 4869.532038] atkbd serio0: Spurious ACK on isa0060/serio0. Some program might be trying to access hardware directly.
[ 4869.645008] usb 1-3: reset full-speed USB device number 2 using xhci_hcd
[ 4869.794727] btusb 1-3:1.0: no reset_resume for driver btusb?
[ 4869.794733] btusb 1-3:1.1: no reset_resume for driver btusb?
[ 4869.794738] btusb 1-3:1.0: forced unbind
[ 4869.921429] usb 1-5: reset high-speed USB device number 4 using xhci_hcd
[ 4870.138880] OOM killer enabled.
[ 4870.138887] Restarting tasks ...
[ 4870.138978] hub 2-0:1.0: state 7 ports 6 chg 0000 evt 0000
[ 4870.139448] hub 2-0:1.0: hub_suspend
[ 4870.139469] usb usb2: bus auto-suspend, wakeup 1
[ 4870.143133] hub 1-0:1.0: state 7 ports 12 chg 0000 evt 0000
[ 4870.155281] done.
[ 4870.155296] random: crng reseeded on system resumption
[ 4870.221583] PM: suspend exit
[ 4870.289756] Process accounting resumed
[ 4870.337559] btusb 1-3:1.0: usb_probe_interface
[ 4870.337575] btusb 1-3:1.0: usb_probe_interface - got id
[ 4870.339244] Bluetooth: hci0: using rampatch file: qca/rampatch_usb_00000302.bin
[ 4870.339251] Bluetooth: hci0: QCA: patch rome 0x302 build 0x3e8, firmware rome 0x302 build 0x111
[ 4870.506507] mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_ops [i915])
[ 4870.712827] Bluetooth: hci0: using NVM file: qca/nvm_usb_00000302.bin
[ 4870.742460] Bluetooth: hci0: HCI Enhanced Setup Synchronous Connection command is advertised, but not supported.
[ 4872.652756] usb 1-5: usb auto-suspend, wakeup 0
[ 4875.715860] wlp58s0: authenticate with e8:48:b8:e1:89:aa (local address=9c:b6:d0:d1:6a:b1)
[ 4875.715881] wlp58s0: send auth to e8:48:b8:e1:89:aa (try 1/3)
[ 4875.816641] wlp58s0: send auth to e8:48:b8:e1:89:aa (try 2/3)
[ 4875.918091] wlp58s0: authenticated
[ 4875.918330] wlp58s0: VHT capa missing/short, disabling VHT/HE/EHT
[ 4875.920639] wlp58s0: associate with e8:48:b8:e1:89:aa (try 1/3)
[ 4876.024651] wlp58s0: associate with e8:48:b8:e1:89:aa (try 2/3)
[ 4876.128692] wlp58s0: associate with e8:48:b8:e1:89:aa (try 3/3)
[ 4876.232641] wlp58s0: association with e8:48:b8:e1:89:aa timed out
[ 4876.434888] wlp58s0: 80 MHz not supported, disabling VHT
[ 4876.490404] wlp58s0: authenticate with e8:48:b8:e1:89:ab (local address=9c:b6:d0:d1:6a:b1)
[ 4876.490411] wlp58s0: send auth to e8:48:b8:e1:89:ab (try 1/3)
[ 4876.592671] wlp58s0: send auth to e8:48:b8:e1:89:ab (try 2/3)
[ 4876.696623] wlp58s0: send auth to e8:48:b8:e1:89:ab (try 3/3)
[ 4876.800624] wlp58s0: authentication with e8:48:b8:e1:89:ab timed out
[ 4882.234420] wlp58s0: authenticate with e8:48:b8:e1:89:aa (local address=9c:b6:d0:d1:6a:b1)
[ 4882.234428] wlp58s0: send auth to e8:48:b8:e1:89:aa (try 1/3)
[ 4882.336625] wlp58s0: send auth to e8:48:b8:e1:89:aa (try 2/3)
[ 4882.444719] wlp58s0: send auth to e8:48:b8:e1:89:aa (try 3/3)
[ 4882.518282] wlp58s0: authenticated
[ 4882.518720] wlp58s0: VHT capa missing/short, disabling VHT/HE/EHT
[ 4882.520652] wlp58s0: associate with e8:48:b8:e1:89:aa (try 1/3)
[ 4882.624660] wlp58s0: associate with e8:48:b8:e1:89:aa (try 2/3)
[ 4882.728830] wlp58s0: associate with e8:48:b8:e1:89:aa (try 3/3)
[ 4882.832752] wlp58s0: association with e8:48:b8:e1:89:aa timed out
[ 4883.937542] wlp58s0: 80 MHz not supported, disabling VHT
[ 4883.992262] wlp58s0: authenticate with e8:48:b8:e1:89:ab (local address=9c:b6:d0:d1:6a:b1)
[ 4883.992278] wlp58s0: send auth to e8:48:b8:e1:89:ab (try 1/3)
[ 4883.994205] wlp58s0: authenticated
[ 4883.996674] wlp58s0: associate with e8:48:b8:e1:89:ab (try 1/3)
[ 4884.001228] wlp58s0: RX AssocResp from e8:48:b8:e1:89:ab (capab=0x421 status=0 aid=5)
[ 4884.004395] wlp58s0: associated
[ 4969.396310] perf: interrupt took too long (2553 > 2500), lowering kernel.perf_event_max_sample_rate to 78250
[ 5017.809089] ath10k_pci 0000:3a:00.0: Spurious quick kickout for STA e8:48:b8:e1:89:ab
[ 5021.022760] ath10k_pci 0000:3a:00.0: Spurious quick kickout for STA e8:48:b8:e1:89:ab
[ 5022.716403] ath10k_pci 0000:3a:00.0: failed to flush transmit queue (skip 0 ar-state 1): 0
[ 5022.724481] wlp58s0: Connection to AP 00:00:00:00:00:00 lost
[ 5023.000094] wlp58s0: 80 MHz not supported, disabling VHT
[ 5023.053546] wlp58s0: authenticate with e8:48:b8:e1:89:ab (local address=9c:b6:d0:d1:6a:b1)
[ 5023.053573] wlp58s0: send auth to e8:48:b8:e1:89:ab (try 1/3)
[ 5023.058504] wlp58s0: send auth to e8:48:b8:e1:89:ab (try 2/3)
[ 5023.063287] wlp58s0: send auth to e8:48:b8:e1:89:ab (try 3/3)
[ 5023.068172] wlp58s0: authentication with e8:48:b8:e1:89:ab timed out
[ 5073.421236] PM: suspend entry (deep)
