Linux Kernel I2C Bus Layer
[Prev Page][Next Page]
- Re: [PATCH v1 01/17] hwmon: pmbus: adm1266: Change nvmem reg_read/write return type, (continued)
- [PATCH AUTOSEL 6.9 21/28] i2c: lpi2c: Avoid calling clk_get_rate during transfer, Sasha Levin
- [PULL REQUEST] i2c-for-6.10-rc3,
Wolfram Sang
- [PATCH v4 0/6] hwmon: Add support for SPD5118 compliant chips,
Guenter Roeck
- [PATCH v1 1/1] treewide: Align match_string() with sysfs_match_string(),
Andy Shevchenko
- Re: [PATCH v1 1/1] treewide: Align match_string() with sysfs_match_string(), Bjorn Helgaas
- Re: [PATCH v1 1/1] treewide: Align match_string() with sysfs_match_string(), Damien Le Moal
- Re: [PATCH v1 1/1] treewide: Align match_string() with sysfs_match_string(), Zhihao Cheng
- Re: [PATCH v1 1/1] treewide: Align match_string() with sysfs_match_string(), Daniel Bristot de Oliveira
- Re: [PATCH v1 1/1] treewide: Align match_string() with sysfs_match_string(), Heiko Stübner
- Re: [PATCH v1 1/1] treewide: Align match_string() with sysfs_match_string(), Jani Nikula
- Re: [PATCH v1 1/1] treewide: Align match_string() with sysfs_match_string(), Vinod Koul
- Re: [PATCH v1 1/1] treewide: Align match_string() with sysfs_match_string(), Wolfram Sang
- Re: [PATCH v1 1/1] treewide: Align match_string() with sysfs_match_string(), Sakari Ailus
- Re: [PATCH v1 1/1] treewide: Align match_string() with sysfs_match_string(), Hans de Goede
- Re: [PATCH v1 1/1] treewide: Align match_string() with sysfs_match_string(), Andi Shyti
- Re: [PATCH v1 1/1] treewide: Align match_string() with sysfs_match_string(), Rodrigo Vivi
- Re: [PATCH v1 1/1] treewide: Align match_string() with sysfs_match_string(), Gautham R. Shenoy
- Re: [PATCH v1 1/1] treewide: Align match_string() with sysfs_match_string(), AngeloGioacchino Del Regno
- [v4,2/2] hwmon: add MP2891 driver,
Noah Wang
- [v4,1/2] dt-bindings: hwmon: Add MPS mp2891,
Noah Wang
- [v4,0/2] hwmon: Add support for MPS mp2891 chip, Noah Wang
- [PATCH 0/2] I2C controller support for KEBA PLCs,
Gerhard Engleder
- [RFC PATCH] i2c: imx: avoid rescheduling when waiting for bus not busy,
Stefan Eichenberger
- [PATCH] i2c: dev: Check for I2C_FUNC_I2C before calling i2c_transfer,
Jean Delvare
- [PATCH] i2c: at91: Fix the functionality flags of the slave-only interface,
Jean Delvare
- [PATCH] i2c: designware: Fix the functionality flags of the slave-only interface,
Jean Delvare
- [v3,2/2] dt-bindings: hwmon: Add mps mp2891,
Noah Wang
- [v3,1/2] hwmon: add MP2891 driver,
Noah Wang
- [PATCH] i2c: piix4: Register SPDs,
Thomas Weißschuh
- [PATCH] i2c: smbus: Log (LP)DDR5 type specific unimplemented message in `i2c_register_spd()`,
Paul Menzel
- [PATCH] i2c: aspeed: Update the stop sw state when the bus recovry occurs,
Tommy Huang
- [PATCH v2 0/3] i2c: mux: gpio: Add 'transition-delay-us' property,
Bastien Curutchet
- [BUG] SFP I2C timeout forces link down with PHY_ERROR,
Sean Anderson
- [PATCH] i2c: viai2c: turn common code into a proper module,
Arnd Bergmann
- Re: [PATCH] i2c: viai2c: turn common code into a proper module, Wolfram Sang
- Re: [PATCH] i2c: viai2c: turn common code into a proper module, Andi Shyti
[PATCH 0/3] i2c: mux: gpio: Add 'transition-delay-ms' property,
Bastien Curutchet
[GIT PULL v2] i2c-host changes for v6.10 - pt. 2, Andi Shyti
[GIT PULL] i2c-host changes for v6.10 - pt. 2,
Andi Shyti
[PATCH v6 00/20] ARM: dts: aspeed: Add IBM P11 BMC systems,
Eddie James
- [PATCH v6 01/20] spi: dt-bindings: Document the IBM FSI-attached SPI controller, Eddie James
- [PATCH v6 04/20] dt-bindings: fsi: p9-occ: Convert to json-schema, Eddie James
- [PATCH v6 17/20] ARM: dts: aspeed: Add IBM Huygens BMC system, Eddie James
- [PATCH v6 10/20] dt-bindings: fsi: Document the FSI Hub Controller, Eddie James
- [PATCH v6 19/20] fsi: occ: Find next available child rather than node name match, Eddie James
- [PATCH v6 11/20] dt-bindings: i2c: i2c-fsi: Convert to json-schema, Eddie James
- [PATCH v6 18/20] fsi: occ: Get device number from FSI minor number API, Eddie James
- [PATCH v6 02/20] dt-bindings: fsi: fsi2spi: Document SPI controller child nodes, Eddie James
- [PATCH v6 03/20] dt-bindings: fsi: Document the IBM SCOM engine, Eddie James
- [PATCH v6 08/20] dt-bindings: fsi: ast2600-fsi-master: Convert to json-schema, Eddie James
- [PATCH v6 07/20] dt-bindings: fsi: ibm,i2cr-fsi-master: Reference common FSI controller, Eddie James
- [PATCH v6 09/20] dt-bindings: fsi: Document the AST2700 FSI controller, Eddie James
- [PATCH v6 05/20] dt-bindings: fsi: Document the IBM SBEFIFO engine, Eddie James
- [PATCH v6 12/20] dt-bindings: arm: aspeed: add IBM P11 BMC boards, Eddie James
- [PATCH v6 20/20] fsi: scom: Update compatible string to match documentation, Eddie James
- [PATCH v6 15/20] ARM: dts: aspeed: Add IBM P11 Blueridge 4U BMC system, Eddie James
- [PATCH v6 14/20] ARM: dts: aspeed: Add IBM P11 Blueridge BMC system, Eddie James
[PATCH v6 06/20] dt-bindings: fsi: Document the FSI controller common properties, Eddie James
[PATCH v6 13/20] ARM: dts: aspeed: Add IBM P11 FSI devices, Eddie James
[PATCH v6 16/20] ARM: dts: aspeed: Add IBM P11 Fuji BMC system, Eddie James
Re: [PATCH v6 00/20] ARM: dts: aspeed: Add IBM P11 BMC systems, Eddie James
Re: [PATCH v6 00/20] ARM: dts: aspeed: Add IBM P11 BMC systems, Rob Herring
[PATCH v2] i2c: ocores: set IACK bit after core is enabled,
Grygorii Tertychnyi
[PULL REQUEST] i2c-for-6.10-rc1,
Wolfram Sang
[PATCH] i2c-dev: Introduce "linux,i2c-dev-name" property for device tree of I2C controller.,
egyszeregy
[PATCH] i2c: ocores: set IACK bit after core is enabled,
Grygorii Tertychnyi
[PATCH 08/13] clk: add AD24xx clock driver,
Alvin Šipraga
[PATCH 00/13] Analog Devices Inc. Automotive Audio Bus (A2B) support,
Alvin Šipraga
- [PATCH 01/13] a2b: add A2B driver core, Alvin Šipraga
- [PATCH 02/13] regmap: add A2B support, Alvin Šipraga
- [PATCH 03/13] dt-bindings: a2b: Analog Devices AD24xx devices, Alvin Šipraga
- [PATCH 06/13] gpio: add AD24xx GPIO driver, Alvin Šipraga
- [PATCH 05/13] a2b: add AD24xx node driver, Alvin Šipraga
- [PATCH 04/13] a2b: add AD24xx I2C interface driver, Alvin Šipraga
- [PATCH 07/13] ASoC: codecs: add AD24xx codec driver, Alvin Šipraga
- [PATCH 08/13] clk: add AD24xx clock driver, Alvin Šipraga
- [PATCH 09/13] i2c: add AD24xx I2C controller driver, Alvin Šipraga
- [PATCH 10/13] dt-bindings: vendor-prefixes: add Bang & Olufsen a/s, Alvin Šipraga
- [PATCH 11/13] dt-bindings: a2b: add compatible string for Beosound Shape node, Alvin Šipraga
- [PATCH 12/13] a2b: add Beosound Shape node driver, Alvin Šipraga
- [PATCH 13/13] MAINTAINERS: add maintainership for A2B drivers, Alvin Šipraga
- Re: [PATCH 00/13] Analog Devices Inc. Automotive Audio Bus (A2B) support, Wolfram Sang
- Re: [PATCH 00/13] Analog Devices Inc. Automotive Audio Bus (A2B) support, Markus Elfring
[PATCH v2 0/3] Add I2C support on TH1520,
Thomas Bonnefille
[PATCH v3 00/40] fsi: Add interrupt support,
Eddie James
- [PATCH v3 09/40] fsi: aspeed: Add AST2700 support, Eddie James
- [PATCH v3 02/40] fsi: Move slave definitions to fsi-slave.h, Eddie James
- [PATCH v3 04/40] fsi: Use a defined value for default echo delay, Eddie James
- [PATCH v3 08/40] fsi: core: Reset errors instead of clearing interrupts, Eddie James
- [PATCH v3 06/40] fsi: core: Improve master read/write/error traces, Eddie James
- [PATCH v3 01/40] fsi: hub: Set master index to link number plus one, Eddie James
- [PATCH v3 18/40] fsi: aspeed: Don't clear all IRQs during OPB transfers, Eddie James
- [PATCH v3 29/40] i2c: fsi: Remove list structure of ports, Eddie James
- [PATCH v3 31/40] i2c: fsi: Add boolean for skip stop command on abort, Eddie James
- [PATCH v3 10/40] fsi: core: Add slave spinlock, Eddie James
- [PATCH v3 05/40] fsi: Calculate local bus clock frequency, Eddie James
- [PATCH v3 26/40] i2c: fsi: Calculate clock divider from local bus frequency, Eddie James
- [PATCH v3 23/40] fsi: core: Add interrupt support, Eddie James
- [PATCH v3 13/40] fsi: core: Disable relative addressing during scan, Eddie James
- [PATCH v3 19/40] fsi: aspeed: Only read result register for successful read, Eddie James
- [PATCH v3 11/40] fsi: core: Allow cfam device type aliases, Eddie James
- [PATCH v3 03/40] fsi: Fix slave addressing after break command, Eddie James
- [PATCH v3 07/40] fsi: core: Add slave error trace, Eddie James
- [PATCH v3 38/40] spi: fsi: Calculate clock divider from local bus frequency, Eddie James
- [PATCH v3 21/40] fsi: aspeed: Disable relative addressing and IPOLL for cfam reset, Eddie James
- [PATCH v3 34/40] fsi: core: Add master register read-only sysfs, Eddie James
- [PATCH v3 28/40] i2c: fsi: Change fsi_i2c_write_reg to accept data instead of a pointer, Eddie James
- [PATCH v3 37/40] fsi: core: Add different types of CFAM, Eddie James
- [PATCH v3 39/40] ARM: dts: aspeed: P10 and tacoma: Set FSI clock frequency, Eddie James
- [PATCH v3 32/40] i2c: fsi: Add interrupt support, Eddie James
- [PATCH v3 30/40] i2c: fsi: Define a function to check status error bits, Eddie James
- [PATCH v3 14/40] fsi: hub: Use common initialization and link enable, Eddie James
- [PATCH v3 35/40] fsi: core: Add slave register read-only sysfs, Eddie James
- [PATCH v3 24/40] fsi: aspeed: Add interrupt support, Eddie James
- [PATCH v3 16/40] fsi: aspeed: Remove cfam reset sysfs file in error path and remove, Eddie James
- [PATCH v3 12/40] fsi: core: Add common regmap master functions, Eddie James
- [PATCH v3 36/40] fsi: i2cr: Adjust virtual CFAM ID to match Odyssey chip, Eddie James
- [PATCH v3 22/40] fsi: aspeed: Use common master error handler, Eddie James
- [PATCH v3 20/40] fsi: aspeed: Switch to spinlock, Eddie James
- [PATCH v3 33/40] fsi: hub master: Reset hub master after errors, Eddie James
- [PATCH v3 40/40] ARM: dts: aspeed: P10: Bump SPI max frequencies, Eddie James
- [PATCH v3 25/40] fsi: hub: Add interrupt support, Eddie James
- [PATCH v3 17/40] fsi: aspeed: Refactor trace functions, Eddie James
- [PATCH v3 15/40] fsi: aspeed: Use common initialization and link enable, Eddie James
- [PATCH v3 27/40] i2c: fsi: Improve formatting, Eddie James
[PATCH v6 00/12] Add suspend to ram support for PCIe on J7200,
Thomas Richard
- [PATCH v6 03/12] i2c: omap: wakeup the controller during suspend() callback, Thomas Richard
- [PATCH v6 04/12] mux: add mux_chip_resume() function, Thomas Richard
- [PATCH v6 01/12] gpio: pca953x: move suspend()/resume() to suspend_noirq()/resume_noirq(), Thomas Richard
- [PATCH v6 02/12] i2c: omap: switch to NOIRQ_SYSTEM_SLEEP_PM_OPS() and RUNTIME_PM_OPS(), Thomas Richard
- [PATCH v6 05/12] mux: mmio: add resume support, Thomas Richard
- [PATCH v6 06/12] PCI: cadence: Extract link setup sequence from cdns_pcie_host_setup(), Thomas Richard
- [PATCH v6 07/12] PCI: cadence: Set cdns_pcie_host_init() global, Thomas Richard
- [PATCH v6 08/12] PCI: j721e: Use dev_err_probe() in the probe() function, Thomas Richard
- [PATCH v6 09/12] PCI: j721e: Add reset GPIO to struct j721e_pcie, Thomas Richard
- [PATCH v6 10/12] PCI: Add T_PERST_CLK_US macro, Thomas Richard
- [PATCH v6 11/12] PCI: j721e: Use T_PERST_CLK_US macro, Thomas Richard
- [PATCH v6 12/12] PCI: j721e: Add suspend and resume support, Thomas Richard
- Re: [PATCH v6 00/12] Add suspend to ram support for PCIe on J7200, Thomas Richard
atmel sha: i2c bus speed under multiplexer (WAS: devicetree for Turris Omnia is missing i2c frequency for atsha204a), Marek Behún
[PATCH v5] dt-bindings: i2c: i2c-fsi: Convert to json-schema,
Eddie James
Dell PowerEdge R930: `i2c i2c-0: More than 8 memory slots on a single bus, contact i801 maintainer to add missing mux config`,
Paul Menzel
[PATCH] power: supply: sbs-manager: Remove class argument from i2c_mux_add_adapter(),
Wolfram Sang
[PATCH v2] i2c: xiic: improve error message when transfer fails to start,
marc . ferland
[GIT PULL] i2c-host changes for v6.10 - pt. 1, Andi Shyti
[GIT PULL] i2c-host-fixes for v6.9-rc8,
Andi Shyti
[PATCH] drm/amd/pm: remove deprecated I2C_CLASS_SPD support from newly added SMU_14_0_2,
Heiner Kallweit
[PATCH v3 0/6] Make I2C terminology more inclusive for I2C Algobit and consumers,
Easwar Hariharan
[PATCH AUTOSEL 6.6 05/19] HID: mcp-2221: cancel delayed_work only when CONFIG_IIO is enabled, Sasha Levin
[PATCH AUTOSEL 6.8 07/23] HID: mcp-2221: cancel delayed_work only when CONFIG_IIO is enabled, Sasha Levin
[RFC PATCH 00/11] Introduce Tegra register config settings,
Krishna Yarlagadda
- [RFC PATCH 01/11] Documentation: Introduce config settings framework, Krishna Yarlagadda
- [RFC PATCH 02/11] soc: tegra: Add config setting framework, Krishna Yarlagadda
- [RFC PATCH 03/11] soc: tegra: config settings binding document, Krishna Yarlagadda
- [RFC PATCH 05/11] i2c: core: Avoid config node enumeration, Krishna Yarlagadda
- [RFC PATCH 04/11] i2c: dt-bindings: configuration settings, Krishna Yarlagadda
- [RFC PATCH 06/11] i2c: tegra: split clock initialization code, Krishna Yarlagadda
- [RFC PATCH 07/11] i2c: tegra: config settings for interface timings, Krishna Yarlagadda
- [RFC PATCH 08/11] arm64: tegra: I2C interface timings, Krishna Yarlagadda
- [RFC PATCH 09/11] sdhci: dt-bindings: configuration settings, Krishna Yarlagadda
- [RFC PATCH 10/11] mmc: host: tegra: config settings for timing, Krishna Yarlagadda
- [RFC PATCH 11/11] arm64: tegra: SDHCI timing settings, Krishna Yarlagadda
- Re: [RFC PATCH 00/11] Introduce Tegra register config settings, Krzysztof Kozlowski
[PATCH] i2c: xiic: print error code when xiic_start_xfer fails,
marc . ferland
[PATCH v2 0/7] Add Mule I2C multiplexer support,
Farouk Bouabid
[PATCH v2 00/12] Make I2C terminology more inclusive for I2C Algobit and consumers,
Easwar Hariharan
- [PATCH v2 01/12] drm/amdgpu, drm/radeon: Make I2C terminology more inclusive, Easwar Hariharan
- [PATCH v2 02/12] drm/gma500: Make I2C terminology more inclusive, Easwar Hariharan
- [PATCH v2 03/12] drm/i915: Make I2C terminology more inclusive, Easwar Hariharan
- [PATCH v2 04/12] media: au0828: Make I2C terminology more inclusive, Easwar Hariharan
- [PATCH v2 05/12] media: cobalt: Make I2C terminology more inclusive, Easwar Hariharan
- [PATCH v2 06/12] media: cx18: Make I2C terminology more inclusive, Easwar Hariharan
- [PATCH v2 07/12] media: cx25821: Make I2C terminology more inclusive, Easwar Hariharan
- [PATCH v2 08/12] media: ivtv: Make I2C terminology more inclusive, Easwar Hariharan
- [PATCH v2 09/12] media: cx23885: Make I2C terminology more inclusive, Easwar Hariharan
- [PATCH v2 10/12] sfc: falcon: Make I2C terminology more inclusive, Easwar Hariharan
- [PATCH v2 11/12] fbdev/smscufx: Make I2C terminology more inclusive, Easwar Hariharan
- [PATCH v2 12/12] fbdev/viafb: Make I2C terminology more inclusive, Easwar Hariharan
[PATCH RFT] i2c: i801: Scan for Dell accelerometer i2c address,
Heiner Kallweit
[PATCH v2] i2c: cadence: Avoid fifo clear after start,
Sai Pavan Boddu
[Regression] dmesg warnings after "i2c: smbus: Support up to 8 SPD EEPROMs",
Mateusz Jończyk
[PATCH v1 00/12] Make I2C terminology more inclusive for I2C Algobit and consumers,
Easwar Hariharan
- [PATCH v1 01/12] drm/amdgpu, drm/radeon: Make I2C terminology more inclusive, Easwar Hariharan
- [PATCH v1 02/12] drm/gma500: Make I2C terminology more inclusive, Easwar Hariharan
- [PATCH v1 03/12] drm/i915: Make I2C terminology more inclusive, Easwar Hariharan
- [PATCH v1 04/12] media: au0828: Make I2C terminology more inclusive, Easwar Hariharan
- [PATCH v1 05/12] media: cobalt: Make I2C terminology more inclusive, Easwar Hariharan
- [PATCH v1 06/12] media: cx18: Make I2C terminology more inclusive, Easwar Hariharan
- [PATCH v1 07/12] media: cx25821: Make I2C terminology more inclusive, Easwar Hariharan
- [PATCH v1 08/12] media: ivtv: Make I2C terminology more inclusive, Easwar Hariharan
- [PATCH v1 09/12] media: cx23885: Make I2C terminology more inclusive, Easwar Hariharan
- [PATCH v1 10/12] sfc: falcon: Make I2C terminology more inclusive, Easwar Hariharan
- [PATCH v1 11/12] fbdev/smscufx: Make I2C terminology more inclusive, Easwar Hariharan
- [PATCH v1 12/12] fbdev/viafb: Make I2C terminology more inclusive, Easwar Hariharan
[PATCH v4 00/17] ARM: dts: aspeed: Add IBM P11 BMC Boards,
Eddie James
- [PATCH v4 01/17] spi: dt-bindings: Document the IBM FSI-attached SPI controller, Eddie James
- [PATCH v4 06/17] dt-bindings: fsi: Document the FSI controller common properties, Eddie James
- [PATCH v4 02/17] dt-bindings: fsi: fsi2spi: Document SPI controller child nodes, Eddie James
- [PATCH v4 03/17] dt-bindings: fsi: Document the IBM SCOM engine, Eddie James
- [PATCH v4 05/17] dt-bindings: fsi: Document the IBM SBEFIFO engine, Eddie James
- [PATCH v4 07/17] dt-bindings: fsi: ibm,i2cr-fsi-master: Reference common FSI controller, Eddie James
- [PATCH v4 04/17] dt-bindings: fsi: p9-occ: Convert to json-schema, Eddie James
- [PATCH v4 08/17] dt-bindings: fsi: ast2600-fsi-master: Convert to json-schema, Eddie James
- [PATCH v4 10/17] dt-bindings: i2c: i2c-fsi: Convert to json-schema, Eddie James
- [PATCH v4 09/17] dt-bindings: fsi: Document the FSI Hub Controller, Eddie James
- [PATCH v4 17/17] fsi: scom: Update compatible string to match documentation, Eddie James
- [PATCH v4 13/17] ARM: dts: aspeed: Add IBM P11 Blueridge BMC system, Eddie James
- [PATCH v4 12/17] ARM: dts: aspeed: Add IBM P11 FSI devices, Eddie James
- [PATCH v4 15/17] fsi: occ: Get device number from FSI minor number API, Eddie James
- [PATCH v4 14/17] ARM: dts: aspeed: Add IBM P11 Fuji BMC system, Eddie James
- [PATCH v4 11/17] dt-bindings: arm: aspeed: add IBM P11 BMC boards, Eddie James
- [PATCH v4 16/17] fsi: occ: Find next available child rather than node name match, Eddie James
[PATCH v3 0/2] hwmon: (pmbus) Add support for Infineon XDP710,
Peter Yin
[PATCH 00/15] i2c: use 'time_left' with wait_for_*,
Wolfram Sang
- [PATCH 01/15] i2c: amd-mp2-plat: use 'time_left' variable with wait_for_completion_timeout(), Wolfram Sang
- [PATCH 02/15] i2c: digicolor: use 'time_left' variable with wait_for_completion_timeout(), Wolfram Sang
- [PATCH 03/15] i2c: exynos5: use 'time_left' variable with wait_for_completion_timeout(), Wolfram Sang
- [PATCH 04/15] i2c: hix5hd2: use 'time_left' variable with wait_for_completion_timeout(), Wolfram Sang
- [PATCH 05/15] i2c: imx-lpi2c: use 'time_left' variable with wait_for_completion_timeout(), Wolfram Sang
- [PATCH 06/15] i2c: omap: use 'time_left' variable with wait_for_completion_timeout(), Wolfram Sang
- [PATCH 07/15] i2c: st: use 'time_left' variable with wait_for_completion_timeout(), Wolfram Sang
- [PATCH 09/15] i2c: stm32f7: use 'time_left' variable with wait_for_completion_timeout(), Wolfram Sang
- [PATCH 08/15] i2c: stm32f4: use 'time_left' variable with wait_for_completion_timeout(), Wolfram Sang
- [PATCH 10/15] i2c: synquacer: use 'time_left' variable with wait_for_completion_timeout(), Wolfram Sang
- [PATCH 11/15] i2c: jz4780: use 'time_left' variable with wait_for_completion_timeout(), Wolfram Sang
- [PATCH 12/15] i2c: qcom-geni: use 'time_left' variable with wait_for_completion_timeout(), Wolfram Sang
- [PATCH 14/15] i2c: s3c2410: use 'time_left' variable with wait_event_timeout(), Wolfram Sang
- [PATCH 13/15] i2c: rk3x: use 'time_left' variable with wait_event_timeout(), Wolfram Sang
- [PATCH 15/15] i2c: pxa: use 'time_left' variable with wait_event_timeout(), Wolfram Sang
- Re: [PATCH 00/15] i2c: use 'time_left' with wait_for_*, Andi Shyti
- Re: [PATCH 00/15] i2c: use 'time_left' with wait_for_*, Andi Shyti
[PULL REQUEST] i2c-for-6.9-rc6,
Wolfram Sang
[PATCH v2] i2c: smbus: Add (LP)DDR5 types to `i2c_register_spd()`,
Paul Menzel
[PATCH RFC] i2c: Add a void pointer to i2c_device_id,
Uwe Kleine-König
[PATCH 0/7] Add Mule I2C multiplexer support,
Farouk Bouabid
[PATCH 0/3] misc: eeprom: at24: add optional dovdd-supply,
zoie.lin
[PATCH v3 0/5] Define i2c_designware in a header file,
Florian Fainelli
[PATCH v3 00/14] ARM: dts: aspeed: Add IBM P11 BMC Boards,
Eddie James
- [PATCH v3 06/14] dt-bindings: fsi: Document the FSI controller common properties, Eddie James
- [PATCH v3 04/14] dt-bindings: fsi: p9-occ: Switch to yaml format, Eddie James
- [PATCH v3 08/14] dt-bindings: fsi: ast2600-fsi-master: Switch to yaml format, Eddie James
- [PATCH v3 03/14] dt-bindings: fsi: Document the FSI2PIB engine, Eddie James
- [PATCH v3 07/14] dt-bindings: fsi: ibm,i2cr-fsi-master: Reference common FSI controller, Eddie James
- [PATCH v3 05/14] dt-bindings: fsi: Document the IBM SBEFIFO engine, Eddie James
- [PATCH v3 01/14] dt-bindings: spi: Document the IBM Power SPI controller, Eddie James
- [PATCH v3 10/14] dt-bindings: i2c: i2c-fsi: Switch to yaml format, Eddie James
- [PATCH v3 09/14] dt-bindings: fsi: Document the FSI Hub Controller, Eddie James
- [PATCH v3 13/14] ARM: dts: aspeed: Add IBM P11 Blueridge BMC system, Eddie James
- [PATCH v3 12/14] ARM: dts: aspeed: Add IBM P11 FSI devices, Eddie James
[Index of Archives]
[Linux USB Devel]
[Video for Linux]
[Big List of Linux Books]
[Linux SCSI]
[Yosemite Forum]
