On 25/04/2024 23:37, Eddie James wrote:
> Add the device tree for the new BMC system. The Blueridge is a
> P11 system with four processors.
>
> Signed-off-by: Eddie James <eajames@xxxxxxxxxxxxx>
> ---
> .../dts/aspeed/aspeed-bmc-ibm-blueridge.dts | 1711 +++++++++++++++++
> 1 file changed, 1711 insertions(+)
> create mode 100644 arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-blueridge.dts
>
> diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-blueridge.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-blueridge.dts
> new file mode 100644
> index 000000000000..8503ce2480b5
> --- /dev/null
> +++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-blueridge.dts
> @@ -0,0 +1,1711 @@
> +// SPDX-License-Identifier: GPL-2.0-or-later
> +// Copyright 2024 IBM Corp.
> +/dts-v1/;
> +
> +#include "aspeed-g6.dtsi"
> +#include <dt-bindings/gpio/aspeed-gpio.h>
> +#include <dt-bindings/i2c/i2c.h>
> +#include <dt-bindings/leds/leds-pca955x.h>
> +
> +/ {
> + model = "Blueridge";
> + compatible = "ibm,blueridge-bmc", "aspeed,ast2600";
> +
> + aliases {
> + serial4 = &uart5;
> + i2c16 = &i2c2mux0;
> + i2c17 = &i2c2mux1;
> + i2c18 = &i2c2mux2;
> + i2c19 = &i2c2mux3;
> + i2c20 = &i2c4mux0chn0;
> + i2c21 = &i2c4mux0chn1;
> + i2c22 = &i2c4mux0chn2;
> + i2c23 = &i2c5mux0chn0;
> + i2c24 = &i2c5mux0chn1;
> + i2c25 = &i2c6mux0chn0;
> + i2c26 = &i2c6mux0chn1;
> + i2c27 = &i2c6mux0chn2;
> + i2c28 = &i2c6mux0chn3;
> + i2c29 = &i2c11mux0chn0;
> + i2c30 = &i2c11mux0chn1;
> + };
> +
> + chosen {
> + stdout-path = &uart5;
> + bootargs = "console=ttyS4,115200n8 earlycon";
Drop bootargs. ALWAYS.
> + };
> +
> + memory@80000000 {
> + device_type = "memory";
> + reg = <0x80000000 0x40000000>;
> + };
> +
> + reserved-memory {
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges;
> +
> + event_log: tcg_event_log@b3d00000 {
No underscores.
Didn't you already received such basic review?
> + no-map;
> + reg = <0xb3d00000 0x100000>;
> + };
> +
> + ramoops@b3e00000 {
> + compatible = "ramoops";
> + reg = <0xb3e00000 0x200000>; /* 16 * (4 * 0x8000) */
> + record-size = <0x8000>;
> + console-size = <0x8000>;
> + ftrace-size = <0x8000>;
> + pmsg-size = <0x8000>;
> + max-reason = <3>; /* KMSG_DUMP_EMERG */
> + };
> +
> + /* LPC FW cycle bridge region requires natural alignment */
> + flash_memory: region@b4000000 {
> + no-map;
> + reg = <0xb4000000 0x04000000>; /* 64M */
> + };
> +
> + /* VGA region is dictated by hardware strapping */
> + vga_memory: region@bf000000 {
> + no-map;
> + compatible = "shared-dma-pool";
> + reg = <0xbf000000 0x01000000>; /* 16M */
> + };
> + };
> +
> + i2c2mux: i2cmux {
> + compatible = "i2c-mux-gpio";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + status = "okay";
??? Drop
> +
> + i2c-parent = <&i2c2>;
> + mux-gpios = <&gpio0 ASPEED_GPIO(G, 4) GPIO_ACTIVE_HIGH>,
> + <&gpio0 ASPEED_GPIO(G, 5) GPIO_ACTIVE_HIGH>;
> + idle-state = <0>;
> +
> + i2c2mux0: i2c@0 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reg = <0>;
> + };
> +
> + i2c2mux1: i2c@1 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reg = <1>;
> + };
> +
> + i2c2mux2: i2c@2 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reg = <2>;
> + };
> +
> + i2c2mux3: i2c@3 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reg = <3>;
> + };
> + };
> +
> + leds {
> + compatible = "gpio-leds";
> +
> + /* BMC Card fault LED at the back */
> + led-bmc-ingraham0 {
> + gpios = <&gpio0 ASPEED_GPIO(H, 1) GPIO_ACTIVE_LOW>;
> + };
> +
> + /* Enclosure ID LED at the back */
> + led-rear-enc-id0 {
> + gpios = <&gpio0 ASPEED_GPIO(H, 2) GPIO_ACTIVE_LOW>;
> + };
> +
> + /* Enclosure fault LED at the back */
> + led-rear-enc-fault0 {
> + gpios = <&gpio0 ASPEED_GPIO(H, 3) GPIO_ACTIVE_LOW>;
> + };
> +
> + /* PCIE slot power LED */
> + led-pcieslot-power {
> + gpios = <&gpio0 ASPEED_GPIO(P, 4) GPIO_ACTIVE_LOW>;
> + };
> + };
> +
> + gpio-keys-polled {
> + compatible = "gpio-keys-polled";
> + poll-interval = <1000>;
> +
> + event-fan0-presence {
> + label = "fan0-presence";
> + gpios = <&pca0 6 GPIO_ACTIVE_LOW>;
> + linux,code = <6>;
> + };
> +
> + event-fan1-presence {
> + label = "fan1-presence";
> + gpios = <&pca0 7 GPIO_ACTIVE_LOW>;
> + linux,code = <7>;
> + };
> +
> + event-fan2-presence {
> + label = "fan2-presence";
> + gpios = <&pca0 8 GPIO_ACTIVE_LOW>;
> + linux,code = <8>;
> + };
> +
> + event-fan3-presence {
> + label = "fan3-presence";
> + gpios = <&pca0 9 GPIO_ACTIVE_LOW>;
> + linux,code = <9>;
> + };
> +
> + event-fan4-presence {
> + label = "fan4-presence";
> + gpios = <&pca0 10 GPIO_ACTIVE_LOW>;
> + linux,code = <10>;
> + };
> +
> + event-fan5-presence {
> + label = "fan5-presence";
> + gpios = <&pca0 11 GPIO_ACTIVE_LOW>;
> + linux,code = <11>;
> + };
> + };
> +
> + iio-hwmon {
> + compatible = "iio-hwmon";
> + io-channels = <&adc1 7>;
> + };
> +};
> +
> +&adc1 {
> + status = "okay";
> + aspeed,int-vref-microvolt = <2500000>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_adc8_default &pinctrl_adc9_default
> + &pinctrl_adc10_default &pinctrl_adc11_default
> + &pinctrl_adc12_default &pinctrl_adc13_default
> + &pinctrl_adc14_default &pinctrl_adc15_default>;
> +};
> +
> +&ehci1 {
> + status = "okay";
> +};
> +
> +&uhci {
> + status = "okay";
> +};
> +
> +&gpio0 {
> + gpio-line-names =
> + /*A0-A7*/ "","","","","","","","",
> + /*B0-B7*/ "","","","","","","checkstop","",
> + /*C0-C7*/ "","","","","","","","",
> + /*D0-D7*/ "","","","","","","","",
> + /*E0-E7*/ "","","","","","","","",
> + /*F0-F7*/ "","","rtc-battery-voltage-read-enable","reset-cause-pinhole","","","factory-reset-toggle","",
> + /*G0-G7*/ "","","","","","","","",
> + /*H0-H7*/ "","bmc-ingraham0","rear-enc-id0","rear-enc-fault0","","","","",
> + /*I0-I7*/ "","","","","","","bmc-secure-boot","",
> + /*J0-J7*/ "","","","","","","","",
> + /*K0-K7*/ "","","","","","","","",
> + /*L0-L7*/ "","","","","","","","",
> + /*M0-M7*/ "","","","","","","","",
> + /*N0-N7*/ "","","","","","","","",
> + /*O0-O7*/ "","","","usb-power","","","","",
> + /*P0-P7*/ "","","","","pcieslot-power","","","",
> + /*Q0-Q7*/ "cfam-reset","","regulator-standby-faulted","","","","","",
> + /*R0-R7*/ "bmc-tpm-reset","power-chassis-control","power-chassis-good","","","","","",
> + /*S0-S7*/ "presence-ps0","presence-ps1","presence-ps2","presence-ps3",
> + "power-ffs-sync-history","","","",
> + /*T0-T7*/ "","","","","","","","",
> + /*U0-U7*/ "","","","","","","","",
> + /*V0-V7*/ "","","","","","","","",
> + /*W0-W7*/ "","","","","","","","",
> + /*X0-X7*/ "","","","","","","","",
> + /*Y0-Y7*/ "","","","","","","","",
> + /*Z0-Z7*/ "","","","","","","","";
> +
> + i2c3_mux_oe_n-hog {
> + gpio-hog;
> + gpios = <ASPEED_GPIO(G, 6) GPIO_ACTIVE_LOW>;
> + output-high;
> + line-name = "I2C3_MUX_OE_N";
> + };
> +
> + usb_power-hog {
> + gpio-hog;
> + gpios = <ASPEED_GPIO(O, 3) GPIO_ACTIVE_LOW>;
> + output-high;
> + };
> +};
> +
> +&emmc_controller {
> + status = "okay";
> +};
> +
> +&pinctrl_emmc_default {
> + bias-disable;
> +};
> +
> +&emmc {
> + status = "okay";
> + clk-phase-mmc-hs200 = <180>, <180>;
> +};
> +
> +&ibt {
> + status = "okay";
> +};
> +
> +&i2c0 {
> + status = "okay";
> +
> + eeprom@51 {
> + compatible = "atmel,24c64";
> + reg = <0x51>;
> + };
> +
> + tca_pres1: tca9554@20{
Node names should be generic. See also an explanation and list of
examples (not exhaustive) in DT specification:
https://devicetree-specification.readthedocs.io/en/latest/chapter2-devicetree-basics.html#generic-names-recommendation
Also missing space before {
> + compatible = "ti,tca9554";
> + reg = <0x20>;
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + gpio-line-names = "",
> + "RUSSEL_FW_I2C_ENABLE_N",
> + "RUSSEL_OPPANEL_PRESENCE_N",
> + "BLYTH_OPPANEL_PRESENCE_N",
> + "CPU_TPM_CARD_PRESENT_N",
> + "DASD_BP2_PRESENT_N",
> + "DASD_BP1_PRESENT_N",
> + "DASD_BP0_PRESENT_N";
> + };
> +};
> +
> +&i2c1 {
> + status = "okay";
> +};
> +
> +&i2c2 {
> + status = "okay";
> +};
> +
> +&i2c3 {
> + status = "okay";
> +
> + power-supply@68 {
> + compatible = "ibm,cffps";
> + reg = <0x68>;
> + };
> +
> + power-supply@69 {
> + compatible = "ibm,cffps";
> + reg = <0x69>;
> + };
> +
> + pca_pres1: pca9552@61 {
Node names should be generic. See also an explanation and list of
examples (not exhaustive) in DT specification:
https://devicetree-specification.readthedocs.io/en/latest/chapter2-devicetree-basics.html#generic-names-recommendation
> + compatible = "nxp,pca9552";
> + reg = <0x61>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + gpio-line-names =
> + "SLOT0_PRSNT_EN_RSVD", "SLOT1_PRSNT_EN_RSVD",
> + "SLOT2_PRSNT_EN_RSVD", "SLOT3_PRSNT_EN_RSVD",
> + "SLOT4_PRSNT_EN_RSVD", "SLOT0_EXPANDER_PRSNT_N",
> + "SLOT1_EXPANDER_PRSNT_N", "SLOT2_EXPANDER_PRSNT_N",
> + "SLOT3_EXPANDER_PRSNT_N", "SLOT4_EXPANDER_PRSNT_N",
> + "", "", "", "", "", "";
> + };
> +};
> +
> +&i2c4 {
> + status = "okay";
> +
> + tmp275@48 {
Node names should be generic. See also an explanation and list of
examples (not exhaustive) in DT specification:
https://devicetree-specification.readthedocs.io/en/latest/chapter2-devicetree-basics.html#generic-names-recommendation
> + compatible = "ti,tmp275";
> + reg = <0x48>;
> + };
> +
> + tmp275@49 {
So it's everywhere...
> + compatible = "ti,tmp275";
> + reg = <0x49>;
> + };
> +
> + tmp275@4a {
> + compatible = "ti,tmp275";
> + reg = <0x4a>;
> + };
> +
> + i2c-mux@70 {
> + compatible = "nxp,pca9546";
> + reg = <0x70>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + status = "okay";
Why? Drop
> + i2c-mux-idle-disconnect;
> +
> + i2c4mux0chn0: i2c@0 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reg = <0>;
> +
> + eeprom@50 {
> + compatible = "atmel,24c64";
> + reg = <0x50>;
> + };
> +
> + pca9551@60 {
Node names should be generic. See also an explanation and list of
examples (not exhaustive) in DT specification:
https://devicetree-specification.readthedocs.io/en/latest/chapter2-devicetree-basics.html#generic-names-recommendation
> + compatible = "nxp,pca9551";
> + reg = <0x60>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + led@0 {
> + label = "cablecard0-cxp-top";
> + reg = <0>;
> + retain-state-shutdown;
> + default-state = "keep";
> + type = <PCA955X_TYPE_LED>;
> + };
> +
> + led@1 {
> + label = "cablecard0-cxp-bot";
> + reg = <1>;
> + retain-state-shutdown;
> + default-state = "keep";
> + type = <PCA955X_TYPE_LED>;
> + };
> + };
> + };
> +
> + i2c4mux0chn1: i2c@1 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reg = <1>;
reg is after compatible, which means if there is no compatible, reg is
always first. This applies you all your DTS patches. This patchset and
future.
> +
> + eeprom@51 {
> + compatible = "atmel,24c64";
> + reg = <0x51>;
> + };
> + };
> +
> + i2c4mux0chn2: i2c@2 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reg = <2>;
> +
> + eeprom@52 {
> + compatible = "atmel,24c64";
> + reg = <0x52>;
> + };
> + };
> + };
> +};
> +
> +&i2c5 {
> + status = "okay";
> +
> + tmp275@48 {
Node names should be generic. See also an explanation and list of
examples (not exhaustive) in DT specification:
https://devicetree-specification.readthedocs.io/en/latest/chapter2-devicetree-basics.html#generic-names-recommendation
> + compatible = "ti,tmp275";
> + reg = <0x48>;
> + };
> +
> + tmp275@49 {
> + compatible = "ti,tmp275";
> + reg = <0x49>;
> + };
> +
> + i2c-mux@70 {
> + compatible = "nxp,pca9546";
> + reg = <0x70>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + status = "okay";
Drop
> + i2c-mux-idle-disconnect;
> +
> + i2c5mux0chn0: i2c@0 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reg = <0>;
> +
> + eeprom@50 {
> + compatible = "atmel,24c64";
> + reg = <0x50>;
> + };
> +
> + pca9551@60 {
> + compatible = "nxp,pca9551";
> + reg = <0x60>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + led@0 {
> + label = "cablecard3-cxp-top";
> + reg = <0>;
> + retain-state-shutdown;
> + default-state = "keep";
> + type = <PCA955X_TYPE_LED>;
> + };
> +
> + led@1 {
> + label = "cablecard3-cxp-bot";
> + reg = <1>;
> + retain-state-shutdown;
> + default-state = "keep";
> + type = <PCA955X_TYPE_LED>;
> + };
> + };
> + };
> +
> + i2c5mux0chn1: i2c@1 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reg = <1>;
> +
> + eeprom@51 {
> + compatible = "atmel,24c64";
> + reg = <0x51>;
> + };
> +
> + pca9551@61 {
> + compatible = "nxp,pca9551";
> + reg = <0x61>;
> + #address-cells = <1>;
> + #size-cells = <0>;
And here you have correct order of properties...
Best regards,
Krzysztof
