On 25/04/2024 23:36, Eddie James wrote:
> Switch to yaml for the OCC documentation. Also document the fact
> that the OCC "bridge" device will often have the hwmon node as a
> child.
>
> Signed-off-by: Eddie James <eajames@xxxxxxxxxxxxx>
> ---
> .../devicetree/bindings/fsi/ibm,p9-occ.txt | 16 --------
> .../devicetree/bindings/fsi/ibm,p9-occ.yaml | 41 +++++++++++++++++++
> 2 files changed, 41 insertions(+), 16 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/fsi/ibm,p9-occ.txt
> create mode 100644 Documentation/devicetree/bindings/fsi/ibm,p9-occ.yaml
>
> diff --git a/Documentation/devicetree/bindings/fsi/ibm,p9-occ.txt b/Documentation/devicetree/bindings/fsi/ibm,p9-occ.txt
> deleted file mode 100644
> index e73358075a90..000000000000
> --- a/Documentation/devicetree/bindings/fsi/ibm,p9-occ.txt
> +++ /dev/null
> @@ -1,16 +0,0 @@
> -Device-tree bindings for FSI-attached POWER9/POWER10 On-Chip Controller (OCC)
> ------------------------------------------------------------------------------
> -
> -This is the binding for the P9 or P10 On-Chip Controller accessed over FSI from
> -a service processor. See fsi.txt for details on bindings for FSI slave and CFAM
> -nodes. The OCC is not an FSI slave device itself, rather it is accessed
> -through the SBE FIFO.
> -
> -Required properties:
> - - compatible = "ibm,p9-occ" or "ibm,p10-occ"
> -
> -Examples:
> -
> - occ {
> - compatible = "ibm,p9-occ";
> - };
> diff --git a/Documentation/devicetree/bindings/fsi/ibm,p9-occ.yaml b/Documentation/devicetree/bindings/fsi/ibm,p9-occ.yaml
> new file mode 100644
> index 000000000000..1fa87d452489
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/fsi/ibm,p9-occ.yaml
> @@ -0,0 +1,41 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/fsi/ibm,p9-occ.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: IBM FSI-attached On-Chip Controller (OCC)
> +
> +maintainers:
> + - Eddie James <eajames@xxxxxxxxxxxxx>
> +
> +description:
> + The POWER processor On-Chip Controller (OCC) helps manage power and
> + thermals for the system, accessed through the FSI-attached SBEFIFO
> + from a service processor.
> +
> +properties:
> + compatible:
> + enum:
> + - ibm,p9-occ
> + - ibm,p10-occ
> +
> + reg:
> + items:
> + - description: Processor index
> +
> +required:
> + - compatible
required goes after all properties, so below.
> +
> +patternProperties:
> + "^occ-hwmon(@.*)?":
> + type: object
> + $ref: /schemas/hwmon/ibm,occ-hwmon.yaml
Drop occ, not relevant. Why unit address is optional? This is supposed
to be specific. Use proper regex as well for hex numbers.
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + occ {
> + compatible = "ibm,p9-occ";
Not complete.
Best regards,
Krzysztof
