On several systems Linux logs:
i2c i2c-0: Memory type 0x22 not supported yet, not instantiating SPD
1. Supermicro Super Server/X13SAE, BIOS 2.0 10/17/2022
2. Dell Inc. Precision 3660/0PRR48, BIOS 2.9.3 11/22/2023
3. Dell Inc. OptiPlex SFF Plus 7010/0YGWFV, BIOS 1.7.1 08/11/2023
4. Run `git grep 'emory type.*supported yet, not instantiating SPD'` in
the repository of dmesg reports for various computers collected by
Linux users at https://linux-hardware.org. [1]
Add 0x22 and 0x23 for DDR5 according to section 7.18.2 (Memory Device —
Type), table 78 in *System Management BIOS (SMBIOS) Reference
Specification*, version 3.6.0 [2].
The same name *ee1004* as for DDR4 is used.
Successfully tested on Supermicro Super Server/X13SAE, BIOS 2.0 10/17/2022:
[ 5.459383] i801_smbus 0000:00:1f.4: SPD Write Disable is set
[ 5.465180] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
[ 5.465803] intel_pstate: HWP enabled by BIOS
[ 5.474046] i2c i2c-0: Successfully instantiated SPD at 0x50
[ 5.475379] intel_pstate: Intel P-state driver initializing
[ 5.487129] i2c i2c-0: Successfully instantiated SPD at 0x51
[ 5.487350] intel_pstate: HWP enabled
[ 5.493288] i2c i2c-0: Successfully instantiated SPD at 0x52
[ 5.496481] hid: raw HID events driver (C) Jiri Kosina
[ 5.502695] i2c i2c-0: Successfully instantiated SPD at 0x53
[1]: https://github.com/linuxhw/Dmesg
[2]: https://www.dmtf.org/sites/default/files/standards/documents/DSP0134_3.6.0.pdf
Signed-off-by: Paul Menzel <pmenzel@xxxxxxxxxxxxx>
Cc: Jean Delvare <jdelvare@xxxxxxx>
---
1. I have no idea if the name ee1004 is correct.
2. Should I test other things besides looking at the Linux messages?
drivers/i2c/i2c-smbus.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/i2c/i2c-smbus.c b/drivers/i2c/i2c-smbus.c
index 97f338b123b1..0d67a95c0599 100644
--- a/drivers/i2c/i2c-smbus.c
+++ b/drivers/i2c/i2c-smbus.c
@@ -308,7 +308,7 @@ EXPORT_SYMBOL_GPL(i2c_free_slave_host_notify_device);
* target systems are the same.
* Restrictions to automatic SPD instantiation:
* - Only works if all filled slots have the same memory type
- * - Only works for DDR, DDR2, DDR3 and DDR4 for now
+ * - Only works for DDR, DDR2, DDR3, DDR4 and DDR5 for now
* - Only works on systems with 1 to 8 memory slots
*/
#if IS_ENABLED(CONFIG_DMI)
@@ -380,6 +380,8 @@ void i2c_register_spd(struct i2c_adapter *adap)
break;
case 0x1A: /* DDR4 */
case 0x1E: /* LPDDR4 */
+ case 0x22: /* DDR5 */
+ case 0x23: /* LPDDR5 */
name = "ee1004";
break;
default:
--
2.43.0
