Re: [PATCH v4 5/6] i2c: smbus: Support DDR5 SPD EEPROMs

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Dear Guenter,


Am 18.06.24 um 20:16 schrieb Guenter Roeck:
On 6/18/24 08:25, Paul Menzel wrote:

Am 18.06.24 um 17:10 schrieb Guenter Roeck:
On 6/18/24 07:59, Paul Menzel wrote:
[ ... ]

I did

     $ tail -3 /etc/sensors3.conf
     chip "spd5118-*"
         set temp1_max 56000
         set temp1_crit 84000

but it stays with the defaults:

```
$ sensors
spd5118-i2c-0-53
Adapter: SMBus I801 adapter at efa0
temp1:        +20.8°C  (low  =  +0.0°C, high = +55.0°C)
                        (crit low =  +0.0°C, crit = +85.0°C)


You'd have to write directly into the attribute files.
For example, if you have

$ grep . /sys/class/hwmon/*/name
/sys/class/hwmon/hwmon0/name:nvme
/sys/class/hwmon/hwmon1/name:nct6687
/sys/class/hwmon/hwmon2/name:k10temp
/sys/class/hwmon/hwmon3/name:spd5118
/sys/class/hwmon/hwmon4/name:spd5118
/sys/class/hwmon/hwmon5/name:spd5118
/sys/class/hwmon/hwmon6/name:spd5118
/sys/class/hwmon/hwmon7/name:mt7921_phy0
/sys/class/hwmon/hwmon8/name:amdgpu

you could run

sudo bash -c 'echo 56000 > /sys/class/hwmon/hwmon3/temp1_max'

     $ sudo bash -c 'echo 56000 > /sys/class/hwmon/hwmon3/temp1_max'
     bash: line 1: echo: write error: No such device or address


Please add

     .use_single_write = true,

to the regmap configuration (spd5118_regmap_config) to see if it helps.

Unfortunately, it does not:

    $ git log --no-decorate -p -1
    commit c27ae51b689d7bdb7baf10c434438d501bd384aa
    Author: Paul Menzel <pmenzel@xxxxxxxxxxxxx>
    Date:   Tue Jun 18 20:26:17 2024 +0200

        hwmon: spd5118: Use .use_single_write = true,

    diff --git a/drivers/hwmon/spd5118.c b/drivers/hwmon/spd5118.c
    index ac94a67793605..33a628840597e 100644
    --- a/drivers/hwmon/spd5118.c
    +++ b/drivers/hwmon/spd5118.c
@@ -522,6 +522,7 @@ static const struct regmap_config spd5118_regmap_config = {
            .writeable_reg = spd5118_writeable_reg,
            .volatile_reg = spd5118_volatile_reg,
            .cache_type = REGCACHE_MAPLE,
    +       .use_single_write = true,
     };

     static int spd5118_probe(struct i2c_client *client)

    $ uname -r
    6.10.0-rc4.mx64.461-00048-gc27ae51b689d
    $ sudo bash -c 'echo 56000 > /sys/class/hwmon/hwmon3/temp1_max'
    bash: line 1: echo: write error: No such device or address


Kind regards,

Paul




[Index of Archives]     [Linux GPIO]     [Linux SPI]     [Linux Hardward Monitoring]     [LM Sensors]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux