When the i2c bus recovey occurs, driver will send i2c stop command
in the scl low condition. In this case the sw state will still keep
original situation. Under multi-master usage, i2c bus recovery will
be called when i2c transfer timeout occurs. Update the stop command
calling with aspeed_i2c_do_stop function to update master_state.
Fixes: f327c686d3ba ("i2c: aspeed: added driver for Aspeed I2C")
Signed-off-by: Tommy Huang <tommy_huang@xxxxxxxxxxxxxx>
---
drivers/i2c/busses/i2c-aspeed.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/i2c/busses/i2c-aspeed.c b/drivers/i2c/busses/i2c-aspeed.c
index ce8c4846b7fa..32f8b0c1c174 100644
--- a/drivers/i2c/busses/i2c-aspeed.c
+++ b/drivers/i2c/busses/i2c-aspeed.c
@@ -169,6 +169,7 @@ struct aspeed_i2c_bus {
};
static int aspeed_i2c_reset(struct aspeed_i2c_bus *bus);
+static void aspeed_i2c_do_stop(struct aspeed_i2c_bus *bus);
static int aspeed_i2c_recover_bus(struct aspeed_i2c_bus *bus)
{
@@ -187,7 +188,7 @@ static int aspeed_i2c_recover_bus(struct aspeed_i2c_bus *bus)
command);
reinit_completion(&bus->cmd_complete);
- writel(ASPEED_I2CD_M_STOP_CMD, bus->base + ASPEED_I2C_CMD_REG);
+ aspeed_i2c_do_stop(bus);
spin_unlock_irqrestore(&bus->lock, flags);
time_left = wait_for_completion_timeout(
--
2.25.1
