On 15-01-24, 17:14, Thomas Richard wrote:
> For suspend and resume support, wiz_clock_init needs to be called
> multiple times.
> Add a parameter to wiz_clock_init to be able to skip clocks
> registration.
>
> Based on the work of Théo Lebrun <theo.lebrun@xxxxxxxxxxx>
>
> Signed-off-by: Thomas Richard <thomas.richard@xxxxxxxxxxx>
> ---
> drivers/phy/ti/phy-j721e-wiz.c | 60 +++++++++++++++++++++++++-----------------
> 1 file changed, 36 insertions(+), 24 deletions(-)
>
> diff --git a/drivers/phy/ti/phy-j721e-wiz.c b/drivers/phy/ti/phy-j721e-wiz.c
> index fc3cd98c60ff..09f7edf16562 100644
> --- a/drivers/phy/ti/phy-j721e-wiz.c
> +++ b/drivers/phy/ti/phy-j721e-wiz.c
> @@ -1076,7 +1076,7 @@ static int wiz_clock_register(struct wiz *wiz)
> return ret;
> }
>
> -static int wiz_clock_init(struct wiz *wiz, struct device_node *node)
> +static int wiz_clock_init(struct wiz *wiz, struct device_node *node, bool probe)
> {
> const struct wiz_clk_mux_sel *clk_mux_sel = wiz->clk_mux_sel;
> struct device *dev = wiz->dev;
> @@ -1087,14 +1087,36 @@ static int wiz_clock_init(struct wiz *wiz, struct device_node *node)
> int ret;
> int i;
>
> - clk = devm_clk_get(dev, "core_ref_clk");
> - if (IS_ERR(clk)) {
> - dev_err(dev, "core_ref_clk clock not found\n");
> - ret = PTR_ERR(clk);
> - return ret;
> + if (probe) {
> + clk = devm_clk_get(dev, "core_ref_clk");
> + if (IS_ERR(clk)) {
> + dev_err(dev, "core_ref_clk clock not found\n");
> + ret = PTR_ERR(clk);
> + return ret;
> + }
> + wiz->input_clks[WIZ_CORE_REFCLK] = clk;
> +
> + if (wiz->data->pma_cmn_refclk1_int_mode) {
> + clk = devm_clk_get(dev, "core_ref1_clk");
> + if (IS_ERR(clk)) {
> + dev_err(dev, "core_ref1_clk clock not found\n");
> + ret = PTR_ERR(clk);
> + return ret;
> + }
> + wiz->input_clks[WIZ_CORE_REFCLK1] = clk;
> + }
> +
> + clk = devm_clk_get(dev, "ext_ref_clk");
> + if (IS_ERR(clk)) {
> + dev_err(dev, "ext_ref_clk clock not found\n");
> + ret = PTR_ERR(clk);
> + return ret;
> + }
> + wiz->input_clks[WIZ_EXT_REFCLK] = clk;
> }
> - wiz->input_clks[WIZ_CORE_REFCLK] = clk;
>
> +
> + clk = wiz->input_clks[WIZ_CORE_REFCLK];
> rate = clk_get_rate(clk);
> if (rate >= 100000000)
> regmap_field_write(wiz->pma_cmn_refclk_int_mode, 0x1);
> @@ -1121,14 +1143,7 @@ static int wiz_clock_init(struct wiz *wiz, struct device_node *node)
> }
>
> if (wiz->data->pma_cmn_refclk1_int_mode) {
> - clk = devm_clk_get(dev, "core_ref1_clk");
> - if (IS_ERR(clk)) {
> - dev_err(dev, "core_ref1_clk clock not found\n");
> - ret = PTR_ERR(clk);
> - return ret;
> - }
> - wiz->input_clks[WIZ_CORE_REFCLK1] = clk;
> -
> + clk = wiz->input_clks[WIZ_CORE_REFCLK1];
> rate = clk_get_rate(clk);
> if (rate >= 100000000)
> regmap_field_write(wiz->pma_cmn_refclk1_int_mode, 0x1);
> @@ -1136,20 +1151,17 @@ static int wiz_clock_init(struct wiz *wiz, struct device_node *node)
> regmap_field_write(wiz->pma_cmn_refclk1_int_mode, 0x3);
> }
>
> - clk = devm_clk_get(dev, "ext_ref_clk");
> - if (IS_ERR(clk)) {
> - dev_err(dev, "ext_ref_clk clock not found\n");
> - ret = PTR_ERR(clk);
> - return ret;
> - }
> - wiz->input_clks[WIZ_EXT_REFCLK] = clk;
> -
> + clk = wiz->input_clks[WIZ_EXT_REFCLK];
> rate = clk_get_rate(clk);
> if (rate >= 100000000)
> regmap_field_write(wiz->pma_cmn_refclk_mode, 0x0);
> else
> regmap_field_write(wiz->pma_cmn_refclk_mode, 0x2);
>
> + /* What follows is about registering clocks. */
> + if (!probe)
> + return 0;
> +
> switch (wiz->type) {
> case AM64_WIZ_10G:
> case J7200_WIZ_10G:
> @@ -1592,7 +1604,7 @@ static int wiz_probe(struct platform_device *pdev)
> goto err_get_sync;
> }
>
> - ret = wiz_clock_init(wiz, node);
> + ret = wiz_clock_init(wiz, node, true);
You are calling it one once? So what am I missing
--
~Vinod
