Now that the driver doesn't hardcode the clock divider, set it
in the device tree.
Signed-off-by: Eddie James <eajames@xxxxxxxxxxxxx>
---
arch/arm/boot/dts/aspeed/aspeed-bmc-opp-tacoma.dts | 1 +
arch/arm/boot/dts/aspeed/ibm-power10-dual.dtsi | 1 +
2 files changed, 2 insertions(+)
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-tacoma.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-tacoma.dts
index 213023bc5aec..96a8f727bc38 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-tacoma.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-tacoma.dts
@@ -193,6 +193,7 @@ &fsim0 {
#address-cells = <2>;
#size-cells = <0>;
+ clock-frequency = <100000000>;
fsi-routing-gpios = <&gpio0 ASPEED_GPIO(Q, 7) GPIO_ACTIVE_HIGH>;
fsi-mux-gpios = <&gpio0 ASPEED_GPIO(B, 0) GPIO_ACTIVE_HIGH>;
diff --git a/arch/arm/boot/dts/aspeed/ibm-power10-dual.dtsi b/arch/arm/boot/dts/aspeed/ibm-power10-dual.dtsi
index cc466910bb52..a93a241d005a 100644
--- a/arch/arm/boot/dts/aspeed/ibm-power10-dual.dtsi
+++ b/arch/arm/boot/dts/aspeed/ibm-power10-dual.dtsi
@@ -8,6 +8,7 @@ &fsim0 {
#size-cells = <0>;
cfam-reset-gpios = <&gpio0 ASPEED_GPIO(Q, 0) GPIO_ACTIVE_HIGH>;
+ clock-frequency = <100000000>;
cfam@0,0 {
reg = <0 0>;
--
2.39.3
