On 13.01.2024 12:23, Heiner Kallweit wrote:
> i801 is the last bus driver supporting I2C_CLASS_SPD. It's used for
> device probing on muxed bus segments. Only known use case so far is
> systems with more than 8 memory modules (with thermal sensor) on
> muxed smbus segments.
> As discussed with Jean, to be able to remove I2C_CLASS_SPD completely
> the following has to be done:
>
> 1. Extend i2c_register_spd() for use on muxed bus segments
> 2. Enable explicit instantiation of thermal sensors on memory modules
> 3. Extend i801 to call i2c_register_spd() on muxed bus segments
>
> Step 2 has been accomplished:
> caba40ec3531 ("eeprom: at24: Probe for DDR3 thermal sensor in the SPD case")
> 393bd1000f81 ("eeprom: ee1004: add support for temperature sensor")
>
> Patch 1 does step 1
> Patches 2 and 3 provide the basis for patch 4
> Patch 4 does step 3
>
> Note: i801 creates the mux platform device, loading and probing of the
> mux driver may be asynchronous. Therefore we can't call i2c_register_spd()
> for the muxed segments from i801. Instead we have to add a flag to the
> platform data, so that the mux driver knows it's supposed to call
> i2c_register_spd().
>
> This series replaces the earlier RFC series.
>
> v2:
> - remove now obsolete comment in patch 1
> - fix link error in some configs in patch 2
>
> Heiner Kallweit (4):
> i2c: smbus: Prepare i2c_register_spd for usage on muxed segments
> i2c: mux: add basic support for calling i2c_register_spd on muxed bus
> segments
> i2c: mux: gpio: Allow to call i2c_register_spd on a muxed segment
> i2c: i801: Call i2c_register_spd() on muxed bus segments
>
> drivers/i2c/Kconfig | 1 +
> drivers/i2c/busses/i2c-i801.c | 1 +
> drivers/i2c/i2c-mux.c | 4 ++++
> drivers/i2c/i2c-smbus.c | 20 ++++++++++++--------
> drivers/i2c/muxes/i2c-mux-gpio.c | 1 +
> include/linux/i2c-mux.h | 1 +
> include/linux/platform_data/i2c-mux-gpio.h | 2 ++
> 7 files changed, 22 insertions(+), 8 deletions(-)
>
Any further feedback on this series, or is it ready to go?
