Enable FSI interrupt controllers for AST2600 and P10BMC hub master.
Signed-off-by: Eddie James <eajames@xxxxxxxxxxxxx>
---
arch/arm/boot/dts/aspeed/aspeed-g6.dtsi | 4 ++++
arch/arm/boot/dts/aspeed/ibm-power10-dual.dtsi | 2 ++
2 files changed, 6 insertions(+)
diff --git a/arch/arm/boot/dts/aspeed/aspeed-g6.dtsi b/arch/arm/boot/dts/aspeed/aspeed-g6.dtsi
index c4d1faade8be..e0b44498269f 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-g6.dtsi
+++ b/arch/arm/boot/dts/aspeed/aspeed-g6.dtsi
@@ -865,22 +865,26 @@ i2c: bus@1e78a000 {
};
fsim0: fsi@1e79b000 {
+ #interrupt-cells = <1>;
compatible = "aspeed,ast2600-fsi-master", "fsi-master";
reg = <0x1e79b000 0x94>;
interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_fsi1_default>;
clocks = <&syscon ASPEED_CLK_GATE_FSICLK>;
+ interrupt-controller;
status = "disabled";
};
fsim1: fsi@1e79b100 {
+ #interrupt-cells = <1>;
compatible = "aspeed,ast2600-fsi-master", "fsi-master";
reg = <0x1e79b100 0x94>;
interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_fsi2_default>;
clocks = <&syscon ASPEED_CLK_GATE_FSICLK>;
+ interrupt-controller;
status = "disabled";
};
diff --git a/arch/arm/boot/dts/aspeed/ibm-power10-dual.dtsi b/arch/arm/boot/dts/aspeed/ibm-power10-dual.dtsi
index a93a241d005a..44e48e39e6e9 100644
--- a/arch/arm/boot/dts/aspeed/ibm-power10-dual.dtsi
+++ b/arch/arm/boot/dts/aspeed/ibm-power10-dual.dtsi
@@ -166,10 +166,12 @@ occ-hwmon {
};
fsi_hub0: hub@3400 {
+ #interrupt-cells = <1>;
compatible = "fsi-master-hub";
reg = <0x3400 0x400>;
#address-cells = <2>;
#size-cells = <0>;
+ interrupt-controller;
};
};
};
--
2.39.3
