[PATCH v3 11/12] arm64: dts: exynos: gs101: define USI8 with I2C configuration

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



USI8 I2C is used to communicate with an eeprom found on the battery
connector. Define USI8 in I2C configuration.

USI8 CONFIG register comes with a 0x0 reset value, meaning that USI8
doesn't have a default protocol (I2C, SPI, UART) at reset. Thus the
selection of the protocol is intentionally left for the board dts file.

Signed-off-by: Tudor Ambarus <tudor.ambarus@xxxxxxxxxx>
---
v3: reorder usi8 clock order (thanks Andre'!). Did not make any
difference at testing as the usi driver treats the clocks in bulk.
v2:
- identify and use gate clocks instead of dividers
- move cells and pinctrl properties from dts to dtsi
- move IRQ type constant on the previous line

 arch/arm64/boot/dts/exynos/google/gs101.dtsi | 29 ++++++++++++++++++++
 1 file changed, 29 insertions(+)

diff --git a/arch/arm64/boot/dts/exynos/google/gs101.dtsi b/arch/arm64/boot/dts/exynos/google/gs101.dtsi
index 6aa25cc4676e..f14a24628d04 100644
--- a/arch/arm64/boot/dts/exynos/google/gs101.dtsi
+++ b/arch/arm64/boot/dts/exynos/google/gs101.dtsi
@@ -352,6 +352,35 @@ pinctrl_peric0: pinctrl@10840000 {
 			interrupts = <GIC_SPI 625 IRQ_TYPE_LEVEL_HIGH 0>;
 		};
 
+		usi8: usi@109700c0 {
+			compatible = "google,gs101-usi",
+				     "samsung,exynos850-usi";
+			reg = <0x109700c0 0x20>;
+			ranges;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&cmu_peric0 CLK_GOUT_PERIC0_CLK_PERIC0_USI8_USI_CLK>,
+				 <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_IPCLK_7>;
+			clock-names = "pclk", "ipclk";
+			samsung,sysreg = <&sysreg_peric0 0x101c>;
+			status = "disabled";
+
+			hsi2c_8: i2c@10970000 {
+				compatible = "google,gs101-hsi2c",
+					     "samsung,exynosautov9-hsi2c";
+				reg = <0x10970000 0xc0>;
+				interrupts = <GIC_SPI 642 IRQ_TYPE_LEVEL_HIGH 0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&hsi2c8_bus>;
+				clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_IPCLK_7>,
+					 <&cmu_peric0 CLK_GOUT_PERIC0_CLK_PERIC0_USI8_USI_CLK>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				status = "disabled";
+			};
+		};
+
 		usi_uart: usi@10a000c0 {
 			compatible = "google,gs101-usi",
 				     "samsung,exynos850-usi";
-- 
2.43.0.472.g3155946c3a-goog





[Index of Archives]     [Linux GPIO]     [Linux SPI]     [Linux Hardward Monitoring]     [LM Sensors]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux