Re: [PATCH v3 10/12] arm64: dts: exynos: gs101: update USI UART to use peric0 clocks

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, Jan 9, 2024 at 7:01 AM Tudor Ambarus <tudor.ambarus@xxxxxxxxxx> wrote:
>
> Get rid of the dummy clock and start using the cmu_peric0 clocks
> for the usi_uart and serial_0 nodes.
>
> Tested the serial at 115200, 1000000 and 3000000 baudrates,
> everthing went fine.
>
> Signed-off-by: Tudor Ambarus <tudor.ambarus@xxxxxxxxxx>
> ---
> v3: no change
> v2: identify and use gate clocks instead of divider clocks
>
>  arch/arm64/boot/dts/exynos/google/gs101.dtsi | 14 ++++----------
>  1 file changed, 4 insertions(+), 10 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/exynos/google/gs101.dtsi b/arch/arm64/boot/dts/exynos/google/gs101.dtsi
> index 2d1344a202a9..6aa25cc4676e 100644
> --- a/arch/arm64/boot/dts/exynos/google/gs101.dtsi
> +++ b/arch/arm64/boot/dts/exynos/google/gs101.dtsi
> @@ -180,14 +180,6 @@ HERA_CPU_SLEEP: cpu-hera-sleep {
>                 };
>         };
>
> -       /* TODO replace with CCF clock */
> -       dummy_clk: clock-3 {
> -               compatible = "fixed-clock";
> -               #clock-cells = <0>;
> -               clock-frequency = <12345>;
> -               clock-output-names = "pclk";
> -       };
> -
>         /* ect node is required to be present by bootloader */
>         ect {
>         };
> @@ -367,7 +359,8 @@ usi_uart: usi@10a000c0 {
>                         ranges;
>                         #address-cells = <1>;
>                         #size-cells = <1>;
> -                       clocks = <&dummy_clk>, <&dummy_clk>;
> +                       clocks = <&cmu_peric0 CLK_GOUT_PERIC0_CLK_PERIC0_USI0_UART_CLK>,
> +                                <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP1_IPCLK_0>;

That looks much better.

Reviewed-by: Sam Protsenko <semen.protsenko@xxxxxxxxxx>

>                         clock-names = "pclk", "ipclk";
>                         samsung,sysreg = <&sysreg_peric0 0x1020>;
>                         samsung,mode = <USI_V2_UART>;
> @@ -378,7 +371,8 @@ serial_0: serial@10a00000 {
>                                 reg = <0x10a00000 0xc0>;
>                                 interrupts = <GIC_SPI 634
>                                               IRQ_TYPE_LEVEL_HIGH 0>;
> -                               clocks = <&dummy_clk 0>, <&dummy_clk 0>;
> +                               clocks = <&cmu_peric0 CLK_GOUT_PERIC0_CLK_PERIC0_USI0_UART_CLK>,
> +                                        <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP1_IPCLK_0>;
>                                 clock-names = "uart", "clk_uart_baud0";
>                                 samsung,uart-fifosize = <256>;
>                                 status = "disabled";
> --
> 2.43.0.472.g3155946c3a-goog
>
>





[Index of Archives]     [Linux GPIO]     [Linux SPI]     [Linux Hardward Monitoring]     [LM Sensors]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux