[Prev Page][Next Page]
- [PATCH 3/5] drm/i915: move wedged to the other gpu error handling stuff
- From: daniel.vetter at ffwll.ch (Daniel Vetter)
- [PATCH 2/5] drm/i915: extract hangcheck/reset/error_state state into substruct
- From: daniel.vetter at ffwll.ch (Daniel Vetter)
- [PATCH 1/5] drm/i915: move dev_priv->mm out of line
- From: daniel.vetter at ffwll.ch (Daniel Vetter)
- [PATCH 0/5] robustify reset state transitions
- From: daniel.vetter at ffwll.ch (Daniel Vetter)
- [PATCH] drm/i915: add LynxPoint-LP PCH ID
- From: przanoni at gmail.com (Paulo Zanoni)
- [PATCH 09/18 v4] drm/i915: make PM interrupt writes non-destructive
- From: ben at bwidawsk.net (Ben Widawsky)
- [PATCH 09/18 v3] drm/i915: make PM interrupt writes non-destructive
- From: ben at bwidawsk.net (Ben Widawsky)
- [PATCH 1/2] drm/i915/sdvo: clean up connectors on intel_sdvo_init() failures
- From: daniel at ffwll.ch (Daniel Vetter)
- [PATCH 1/2] drm/i915/sdvo: clean up connectors on intel_sdvo_init() failures
- From: chris at chris-wilson.co.uk (Chris Wilson)
- [PATCH 2/2] drm/i915/sdvo: kfree the intel_sdvo_connector, not drm_connector, on destroy
- From: ville.syrjala at linux.intel.com (Ville Syrjälä)
- [PATCH 2/2] drm/i915/sdvo: kfree the intel_sdvo_connector, not drm_connector, on destroy
- From: jani.nikula at intel.com (Jani Nikula)
- [PATCH 1/2] drm/i915/sdvo: clean up connectors on intel_sdvo_init() failures
- From: jani.nikula at intel.com (Jani Nikula)
- [PATCH 2/2] drm/i915: do not default to 18 bpp for eDP if missing from VBT
- From: jani.nikula at intel.com (Jani Nikula)
- [PATCH 1/2] drm/i915: do not ignore eDP bpc settings from vbt
- From: jani.nikula at intel.com (Jani Nikula)
- [PATCH] drm/i915: fix possible NULL dereference of dev_priv
- From: mika.kuoppala at linux.intel.com (Mika Kuoppala)
- [RFC] Async flips
- From: ville.syrjala at linux.intel.com (Ville Syrjälä)
- [PATCH] drm/i915: Serialize the reset worker and any waiters
- From: chris at chris-wilson.co.uk (Chris Wilson)
- [PATCH] drm/i915/i2c: Track users of GMBUS force-bit
- From: jani.nikula at intel.com (Jani Nikula)
- [RFC] Async flips
- From: mario.kleiner at tuebingen.mpg.de (Mario Kleiner)
- Updated -testing
- From: daniel at ffwll.ch (Daniel Vetter)
- [PATCH] drm/i915: Report amount of usable graphics memory in MiB
- From: ben at bwidawsk.net (Ben Widawsky)
- [PATCH] drm/i915: Report amount of usable graphics memory in MiB
- From: daniel at ffwll.ch (Daniel Vetter)
- [PATCH] drm/i915: Report amount of usable graphics memory in MiB
- From: ben at bwidawsk.net (Ben Widawsky)
- [PATCH] intel: Fix missing ETIME on BSD operating systems
- From: ben at bwidawsk.net (Ben Widawsky)
- [ANNOUNCE] xf86-video-intel 2.20.13
- From: chris at chris-wilson.co.uk (Chris Wilson)
- [PATCH 3/4] drm/i915: Allow userspace to hint that the relocations were known
- From: daniel at ffwll.ch (Daniel Vetter)
- [PATCH 3/4] drm/i915: Allow userspace to hint that the relocations were known
- From: chris at chris-wilson.co.uk (Chris Wilson)
- [PATCH] drm/i915: Report amount of usable graphics memory in MiB
- From: chris at chris-wilson.co.uk (Chris Wilson)
- [PATCH] intel: Fix missing ETIME on BSD operating systems
- From: ryao at gentoo.org (Richard Yao)
- [PATCH] drm/i915/i2c: Track users of GMBUS force-bit
- From: daniel at ffwll.ch (Daniel Vetter)
- [PATCH 1/4] drm/i915: Take the handle idr spinlock once for looking up the exec objects
- From: eric at anholt.net (Eric Anholt)
- [PATCH] drm/i915: Allocate the proper size for contexts.
- From: daniel at ffwll.ch (Daniel Vetter)
- [PATCH 3/4] drm/i915: Allow userspace to hint that the relocations were known
- From: daniel at ffwll.ch (Daniel Vetter)
- [PATCH] intel: Fix missing ETIME on BSD operating systems
- From: eric at anholt.net (Eric Anholt)
- [PATCH] intel: Fix missing ETIME on BSD operating systems
- From: ben at bwidawsk.net (Ben Widawsky)
- [PATCH] drm/i915: Allocate the proper size for contexts.
- From: ben at bwidawsk.net (Ben Widawsky)
- [PATCH 3/4] drm/i915: Allow userspace to hint that the relocations were known
- From: chris at chris-wilson.co.uk (Chris Wilson)
- [PATCH 3/4] drm/i915: Allow userspace to hint that the relocations were known
- From: daniel at ffwll.ch (Daniel Vetter)
- [PATCH] drm/i915/i2c: Track users of GMBUS force-bit
- From: chris at chris-wilson.co.uk (Chris Wilson)
- [PATCH 4/4] drm/i915: Use the reloc.handle as an index into the execbuffer array
- From: chris at chris-wilson.co.uk (Chris Wilson)
- [PATCH 3/4] drm/i915: Allow userspace to hint that the relocations were known
- From: chris at chris-wilson.co.uk (Chris Wilson)
- [PATCH 2/4] drm/i915: Move the execbuffer objects list from the stack into the tracker
- From: chris at chris-wilson.co.uk (Chris Wilson)
- [PATCH 1/4] drm/i915: Take the handle idr spinlock once for looking up the exec objects
- From: chris at chris-wilson.co.uk (Chris Wilson)
- [PATCH 2/2] drm/i915: Update load-detect failure paths for modeset-rework
- From: daniel at ffwll.ch (Daniel Vetter)
- [PATCH] drm/i915: Missed lock change with rps lock
- From: daniel at ffwll.ch (Daniel Vetter)
- [PATCH] drm/i915: Always calculate 8xx WM values based on a 32-bpp framebuffer
- From: daniel at ffwll.ch (Daniel Vetter)
- [PATCH] Revert "drm/i915: enable rc6 on ilk again"
- From: chris at chris-wilson.co.uk (Chris Wilson)
- [PATCH] Revert "drm/i915: enable rc6 on ilk again"
- From: chris at chris-wilson.co.uk (Chris Wilson)
- [PATCH] Revert "drm/i915: enable rc6 on ilk again"
- From: chris at chris-wilson.co.uk (Chris Wilson)
- [PATCH] intel: Fix missing ETIME on BSD operating systems
- From: ryao at cs.stonybrook.edu (Richard Yao)
- [PATCH] intel: Fix missing ETIME on BSD operating systems
- From: ryao at gentoo.org (Richard Yao)
- [PATCH] intel: Fix missing ETIME on BSD operating systems
- From: ryao at gentoo.org (Richard Yao)
- [PATCH] intel: Fix missing ETIME on BSD operating systems
- From: ryao at gentoo.org (Richard Yao)
- [PATCH] drm/i915: Fix sparse warnings in from AGP kill code
- From: daniel at ffwll.ch (Daniel Vetter)
- [PATCH] drm/i915: Fix sparse warnings in from AGP kill code
- From: daniel at ffwll.ch (Daniel Vetter)
- [PATCH 1/5 v5] drm/i915: Stop using AGP layer for GEN6+
- From: chris at chris-wilson.co.uk (Chris Wilson)
- [PATCH] drm/i915: Guard pages being reaped by OOM whilst binding-to-GTT
- From: chris at chris-wilson.co.uk (Chris Wilson)
- REg: Doubt in drm kernel driver
- From: haihao.xiang at intel.com (Xiang, Haihao)
- REg: Doubt in drm kernel driver
- From: srinath.duraisamy at intel.com (Duraisamy, Srinath)
- [PATCH] drm/i915: Borrow our struct_mutex for the direct reclaim
- From: ben at bwidawsk.net (Ben Widawsky)
- About HD3000(sandybridge) driver on vxWorks
- From: for1984 at 126.com (for1984)
- S3 causing IRQ delivery mismatch - i915 hotplug storm
- From: ben at guthro.net (Ben Guthro)
- S3 causing IRQ delivery mismatch - i915 hotplug storm
- From: ben at guthro.net (Ben Guthro)
- [PATCH v2 0/4] drm/exynos, intel: fix locking for flip/vbl event list
- From: inki.dae at samsung.com (Inki Dae)
- [PATCH v2 0/4] drm/exynos, intel: fix locking for flip/vbl event list
- From: rob.clark at linaro.org (Rob Clark)
- [PATCH v2 0/4] drm/exynos, intel: fix locking for flip/vbl event list
- From: inki.dae at samsung.com (Inki Dae)
- S3 causing IRQ delivery mismatch - i915 hotplug storm
- From: ben at guthro.net (Ben Guthro)
- REg: Doubt in drm kernel driver
- From: srinath.duraisamy at intel.com (Duraisamy, Srinath)
- [PATCH 06/18] drm/i915: add HAS_VEBOX
- From: jani.nikula at linux.intel.com (Jani Nikula)
- [PATCH 05/18] drm/i915: Rename ring flush functions
- From: jani.nikula at linux.intel.com (Jani Nikula)
- [PATCH 02/18] drm/i915: Semaphore MBOX update generalization
- From: jani.nikula at linux.intel.com (Jani Nikula)
- [PATCH 17/18] drm/i915: Use a slab for object allocation
- From: ben at bwidawsk.net (Ben Widawsky)
- [PATCH 01/18] drm/i915: Comments for semaphore clarification
- From: jani.nikula at linux.intel.com (Jani Nikula)
- [PATCH 00/18] [RFC] Introduce the Haswell VECS
- From: ben at bwidawsk.net (Ben Widawsky)
- [PATCH 09/18] drm/i915: make PM interrupt writes non-destructive
- From: ben at bwidawsk.net (Ben Widawsky)
- [PATCH v2 0/4] drm/exynos, intel: fix locking for flip/vbl event list
- From: imre.deak at intel.com (Imre Deak)
- [PATCH 09/18] drm/i915: make PM interrupt writes non-destructive
- From: chris at chris-wilson.co.uk (Chris Wilson)
- [PATCH v2 0/4] drm/exynos, intel: fix locking for flip/vbl event list
- From: inki.dae at samsung.com (Inki Dae)
- [PATCH 18/18] drm/i915: add I915_PARAM_HAS_VEBOX to i915_getparam
- From: ben at bwidawsk.net (Ben Widawsky)
- [PATCH 17/18] drm/i915: add I915_EXEC_VEBOX to i915_gem_do_execbuffer()
- From: ben at bwidawsk.net (Ben Widawsky)
- [PATCH 16/18] drm/i915: add VEBOX into debugfs
- From: ben at bwidawsk.net (Ben Widawsky)
- [PATCH 15/18] drm/i915: Enable vebox interrupts
- From: ben at bwidawsk.net (Ben Widawsky)
- [PATCH 14/18] drm/i915: vebox interrupt get/put
- From: ben at bwidawsk.net (Ben Widawsky)
- [PATCH 13/18] drm/i915: consolidate interrupt naming scheme
- From: ben at bwidawsk.net (Ben Widawsky)
- [PATCH 12/18] drm/i915: Convert irq_refounct to struct
- From: ben at bwidawsk.net (Ben Widawsky)
- [PATCH 11/18] drm/i915: Add PM regs to pre install
- From: ben at bwidawsk.net (Ben Widawsky)
- [PATCH 10/18] drm/i915: Create an ivybridge_irq_preinstall
- From: ben at bwidawsk.net (Ben Widawsky)
- [PATCH 09/18] drm/i915: make PM interrupt writes non-destructive
- From: ben at bwidawsk.net (Ben Widawsky)
- [PATCH 08/18] drm/i915: Create a more generic pm handler for hsw+
- From: ben at bwidawsk.net (Ben Widawsky)
- [PATCH 07/18] drm/i915: Vebox ringbuffer init
- From: ben at bwidawsk.net (Ben Widawsky)
- [PATCH 06/18] drm/i915: add HAS_VEBOX
- From: ben at bwidawsk.net (Ben Widawsky)
- [PATCH 05/18] drm/i915: Rename ring flush functions
- From: ben at bwidawsk.net (Ben Widawsky)
- [PATCH 04/18] drm/i915: Add VECS semaphore bits
- From: ben at bwidawsk.net (Ben Widawsky)
- [PATCH 03/18] drm/i915: Introduce VECS: the 4th ring
- From: ben at bwidawsk.net (Ben Widawsky)
- [PATCH 02/18] drm/i915: Semaphore MBOX update generalization
- From: ben at bwidawsk.net (Ben Widawsky)
- [PATCH 01/18] drm/i915: Comments for semaphore clarification
- From: ben at bwidawsk.net (Ben Widawsky)
- [PATCH 00/18] [RFC] Introduce the Haswell VECS
- From: ben at bwidawsk.net (Ben Widawsky)
- [PATCH] drm/i915: Missed lock change with rps lock
- From: ben at bwidawsk.net (Ben Widawsky)
- [PATCH 1/2] drm/i915: Clear unused fields of mode for framebuffer creation
- From: ville.syrjala at linux.intel.com (Ville Syrjälä)
- [PATCH] drm/i915: Fix sparse warnings in from AGP kill code
- From: ben at bwidawsk.net (Ben Widawsky)
- [PATCH] drm/i915/crt: fix DPMS standby and suspend mode handling
- From: daniel at ffwll.ch (Daniel Vetter)
- SNB GPU hang
- From: daniel at quora.org (Daniel J Blueman)
- [PATCH 2/2] drm/i915: Update load-detect failure paths for modeset-rework
- From: chris at chris-wilson.co.uk (Chris Wilson)
- [PATCH 1/2] drm/i915: Clear unused fields of mode for framebuffer creation
- From: chris at chris-wilson.co.uk (Chris Wilson)
- [PATCH 17/18] drm/i915: Use a slab for object allocation
- From: chris at chris-wilson.co.uk (Chris Wilson)
- [PATCH 17/18] drm/i915: Use a slab for object allocation
- From: ben at bwidawsk.net (Ben Widawsky)
- [PATCH 17/18] drm/i915: Use a slab for object allocation
- From: ben at bwidawsk.net (Ben Widawsky)
- [PATCH 17/18] drm/i915: Use a slab for object allocation
- From: ben at bwidawsk.net (Ben Widawsky)
- [PATCH 16/18] drm/i915: Allocate overlay registers from stolen memory
- From: ben at bwidawsk.net (Ben Widawsky)
- [PATCH 13/18] drm/i915: Introduce i915_gem_object_create_stolen()
- From: ben at bwidawsk.net (Ben Widawsky)
- [PATCH 13/18] drm/i915: Introduce i915_gem_object_create_stolen()
- From: chris at chris-wilson.co.uk (Chris Wilson)
- [PATCH 13/18] drm/i915: Introduce i915_gem_object_create_stolen()
- From: ben at bwidawsk.net (Ben Widawsky)
- [PATCH 10/18] drm/i915: Support readback of stolen objects upon error
- From: ben at bwidawsk.net (Ben Widawsky)
- [PATCH v2] drm/i915: Wait for pending flips in intel_pipe_set_base()
- From: chris at chris-wilson.co.uk (Chris Wilson)
- [PATCH 07/18] drm/i915: Defer allocation of stolen memory for FBC until actual first use
- From: ben at bwidawsk.net (Ben Widawsky)
- [PATCH 07/18] drm/i915: Defer allocation of stolen memory for FBC until actual first use
- From: chris at chris-wilson.co.uk (Chris Wilson)
- [PATCH 06/18] drm/i915: Delay allocation of stolen space for FBC
- From: chris at chris-wilson.co.uk (Chris Wilson)
- [PATCH 05/18] drm: Introduce an iterator over holes in the drm_mm range manager
- From: chris at chris-wilson.co.uk (Chris Wilson)
- [PATCH 07/18] drm/i915: Defer allocation of stolen memory for FBC until actual first use
- From: ben at bwidawsk.net (Ben Widawsky)
- [PATCH 03/18] drm/i915: Fix location of stolen memory register for SandyBridge+
- From: ben at bwidawsk.net (Ben Widawsky)
- [PATCH 06/18] drm/i915: Delay allocation of stolen space for FBC
- From: ben at bwidawsk.net (Ben Widawsky)
- [PATCH 05/18] drm: Introduce an iterator over holes in the drm_mm range manager
- From: ben at bwidawsk.net (Ben Widawsky)
- [PATCH v2] drm/i915: Wait for pending flips in intel_pipe_set_base()
- From: ville.syrjala at linux.intel.com (ville.syrjala at linux.intel.com)
- [PATCH 9/9] drm/i915: rip out update_linetime_wm abstraction
- From: daniel.vetter at ffwll.ch (Daniel Vetter)
- [PATCH 8/9] drm/i915: don't call update_watermarks from haswell enable/disable code
- From: daniel.vetter at ffwll.ch (Daniel Vetter)
- [PATCH 7/9] drm/i915: don't call update_watermark in crtc_mode_set
- From: daniel.vetter at ffwll.ch (Daniel Vetter)
- [PATCH 6/9] drm/i915: extract common link_m_n helpers
- From: daniel.vetter at ffwll.ch (Daniel Vetter)
- [PATCH 5/9] drm/i915: drop unnecessary clearing of pch dp transcoder timings
- From: daniel.vetter at ffwll.ch (Daniel Vetter)
- [PATCH 4/9] drm/i915: WARN on !crtc in intel_dp_link_down
- From: daniel.vetter at ffwll.ch (Daniel Vetter)
- [PATCH 3/9] drm/i915: use wait_for_vblank instead of msleep(17)
- From: daniel.vetter at ffwll.ch (Daniel Vetter)
- [PATCH 2/9] drm/i915: rip out pre-production ilk cpu edp w/a
- From: daniel.vetter at ffwll.ch (Daniel Vetter)
- [PATCH 1/9] drm/i915: move set_pll_edp to intel_dp.c
- From: daniel.vetter at ffwll.ch (Daniel Vetter)
- [PATCH 0/9] dp refactoring and minor other stuff
- From: daniel.vetter at ffwll.ch (Daniel Vetter)
- [PATCH 8/8] drm/i915: rip out pre-DDI stuff from haswell_crtc_mode_set
- From: daniel.vetter at ffwll.ch (Daniel Vetter)
- [PATCH 7/8] drm/i915: enable intel_lvds->pre_pll_enable for ilk+, too
- From: daniel.vetter at ffwll.ch (Daniel Vetter)
- [PATCH 6/8] drm/i915: move intel_update_lvds to intel_lvds->pre_pll_enable
- From: daniel.vetter at ffwll.ch (Daniel Vetter)
- [PATCH 5/8] drm/i915: add intel_lvds->reg
- From: daniel.vetter at ffwll.ch (Daniel Vetter)
- [PATCH 4/8] drm/i915: track is_dual_link in intel_lvds
- From: daniel.vetter at ffwll.ch (Daniel Vetter)
- [PATCH 3/8] drm/i915: move is_dual_link_lvds to intel_lvds.c
- From: daniel.vetter at ffwll.ch (Daniel Vetter)
- [PATCH 2/8] drm/i915: replace ad-hoc dual-link lvds checks
- From: daniel.vetter at ffwll.ch (Daniel Vetter)
- [PATCH 1/8] drm/i915: add encoder->pre_pll_enable callback
- From: daniel.vetter at ffwll.ch (Daniel Vetter)
- [PATCH 0/8] lvds cleanup
- From: daniel.vetter at ffwll.ch (Daniel Vetter)
- [PATCH] drm/i915/crt: fix DPMS standby and suspend mode handling
- From: jani.nikula at intel.com (Jani Nikula)
- [PATCH] drm/i915: Flush outstanding unpin tasks before pageflipping
- From: simon.farnsworth at onelan.co.uk (Simon Farnsworth)
- [PATCH 1/4] drm/i915: don't block resume on fb console resume
- From: jbarnes at virtuousgeek.org (Jesse Barnes)
- [PATCH 5/5] drm/i915: Move the remaining gtt code
- From: daniel at ffwll.ch (Daniel Vetter)
- [PATCH 1/4] drm/i915: don't block resume on fb console resume
- From: paulepanter at users.sourceforge.net (Paul Menzel)
- [PATCH 00/10] shrink dev_priv by 300 lines
- From: daniel.vetter at ffwll.ch (Daniel Vetter)
- [PATCH 00/10] shrink dev_priv by 300 lines
- From: ben at bwidawsk.net (Ben Widawsky)
- [PATCH 5/5] drm/i915: Move the remaining gtt code
- From: ben at bwidawsk.net (Ben Widawsky)
- [PATCH 4/5 v2] drm/i915: flush system agent TLBs on SNB
- From: ben at bwidawsk.net (Ben Widawsky)
- [PATCH 3/5 v2] drm/i915: Kill off now unused gen6+ AGP code
- From: ben at bwidawsk.net (Ben Widawsky)
- [PATCH 2/5] drm/i915: Calculate correct stolen size for GEN7+
- From: ben at bwidawsk.net (Ben Widawsky)
- [PATCH 1/5 v5] drm/i915: Stop using AGP layer for GEN6+
- From: ben at bwidawsk.net (Ben Widawsky)
- [PATCH 1/4] drm/i915: don't block resume on fb console resume v2
- From: keithp at keithp.com (Keith Packard)
- [PATCH 05/10] drm/i915: extract dev_priv fbc state into separate substruct
- From: daniel at ffwll.ch (Daniel Vetter)
- [PATCH 1/2] PM: make VT switching to the suspend console optional
- From: alan at lxorguk.ukuu.org.uk (Alan Cox)
- [PATCH 1/2] PM: make VT switching to the suspend console optional
- From: jbarnes at virtuousgeek.org (Jesse Barnes)
- [RFC] Suspend/resume without VT switches
- From: jbarnes at virtuousgeek.org (Jesse Barnes)
- [PATCH 1/2] PM: make VT switching to the suspend console optional
- From: jbarnes at virtuousgeek.org (Jesse Barnes)
- [PATCH 0/3] drm/i915: eDP scaling mode change support
- From: ynovikov at chromium.org (Yuly Novikov)
- [PATCH 1/2] PM: make VT switching to the suspend console optional
- From: alan at lxorguk.ukuu.org.uk (Alan Cox)
- [RFC] Suspend/resume without VT switches
- From: rjw at sisk.pl (Rafael J. Wysocki)
- [RFC] Suspend/resume without VT switches
- From: jbarnes at virtuousgeek.org (Jesse Barnes)
- [PATCH 4/4] drm/i915: don't rewrite the GTT on resume v4
- From: jbarnes at virtuousgeek.org (Jesse Barnes)
- [PATCH 4/4] drm/i915: don't rewrite the GTT on resume v4
- From: daniel at ffwll.ch (Daniel Vetter)
- [PATCH] drm/i915: protect RPS/RC6 related accesses (including PCU) with a new mutex
- From: daniel.vetter at ffwll.ch (Daniel Vetter)
- [PATCH 06/10] drm/i915: extract l3_parity substruct from dev_priv
- From: daniel at ffwll.ch (Daniel Vetter)
- [RFC] Suspend/resume without VT switches
- From: rjw at sisk.pl (Rafael J. Wysocki)
- [PATCH 2/2] drm/i915: support resume without VT switch
- From: jbarnes at virtuousgeek.org (Jesse Barnes)
- [PATCH 1/2] PM: make VT switching to the suspend console optional
- From: jbarnes at virtuousgeek.org (Jesse Barnes)
- [RFC] Suspend/resume without VT switches
- From: jbarnes at virtuousgeek.org (Jesse Barnes)
- [PATCH] drm/i915: Flush outstanding unpin tasks before pageflipping
- From: eric at anholt.net (Eric Anholt)
- [PATCH 06/10] drm/i915: extract l3_parity substruct from dev_priv
- From: jbarnes at virtuousgeek.org (Jesse Barnes)
- [PATCH 05/10] drm/i915: extract dev_priv fbc state into separate substruct
- From: jbarnes at virtuousgeek.org (Jesse Barnes)
- [PATCH 04/10] drm/i915: move dri1 dungeon out of dev_priv
- From: jbarnes at virtuousgeek.org (Jesse Barnes)
- [PATCH 03/10] drm/i915: move pwrctx/renderctx to the other ilk power state
- From: jbarnes at virtuousgeek.org (Jesse Barnes)
- [PATCH 02/10] drm/i915: move dev_priv->(rps|ips) out of line
- From: jbarnes at virtuousgeek.org (Jesse Barnes)
- [PATCH 01/10] drm/i915: move the suspend/resume register file out of dev_priv
- From: jbarnes at virtuousgeek.org (Jesse Barnes)
- [PATCH 10/10] drm/i915: move fence_regs to the fence lru
- From: daniel.vetter at ffwll.ch (Daniel Vetter)
- [PATCH 09/10] drm/i915: kill dev_priv->modeset_on_lid
- From: daniel.vetter at ffwll.ch (Daniel Vetter)
- [PATCH 08/10] drm/i915: extract hangcheck/reset/error_state state into substruct
- From: daniel.vetter at ffwll.ch (Daniel Vetter)
- [PATCH 07/10] drm/i915: move dev_priv->mm out of line
- From: daniel.vetter at ffwll.ch (Daniel Vetter)
- [PATCH 06/10] drm/i915: extract l3_parity substruct from dev_priv
- From: daniel.vetter at ffwll.ch (Daniel Vetter)
- [PATCH 05/10] drm/i915: extract dev_priv fbc state into separate substruct
- From: daniel.vetter at ffwll.ch (Daniel Vetter)
- [PATCH 04/10] drm/i915: move dri1 dungeon out of dev_priv
- From: daniel.vetter at ffwll.ch (Daniel Vetter)
- [PATCH 03/10] drm/i915: move pwrctx/renderctx to the other ilk power state
- From: daniel.vetter at ffwll.ch (Daniel Vetter)
- [PATCH 02/10] drm/i915: move dev_priv->(rps|ips) out of line
- From: daniel.vetter at ffwll.ch (Daniel Vetter)
- [PATCH 01/10] drm/i915: move the suspend/resume register file out of dev_priv
- From: daniel.vetter at ffwll.ch (Daniel Vetter)
- [PATCH 00/10] shrink dev_priv by 300 lines
- From: daniel.vetter at ffwll.ch (Daniel Vetter)
- [PATCH v2 3b/3] drm/i915: Kill i915_gem_execbuffer_wait_for_flips()
- From: chris at chris-wilson.co.uk (Chris Wilson)
- [PATCH v2 3b/3] drm/i915: Kill i915_gem_execbuffer_wait_for_flips()
- From: krh at bitplanet.net (Kristian Høgsberg)
- [PATCH 4/4] drm/i915: don't rewrite the GTT on resume v4
- From: jbarnes at virtuousgeek.org (Jesse Barnes)
- [PATCH 3/4] drm/i915: protect RPS/RC6 related accesses (including PCU) with a new mutex
- From: jbarnes at virtuousgeek.org (Jesse Barnes)
- [PATCH 2/4] drm/i915: put ring frequency and turbo setup into a work queue v5
- From: jbarnes at virtuousgeek.org (Jesse Barnes)
- [PATCH 1/4] drm/i915: don't block resume on fb console resume v2
- From: jbarnes at virtuousgeek.org (Jesse Barnes)
- [PATCH v2 3b/3] drm/i915: Kill i915_gem_execbuffer_wait_for_flips()
- From: jbarnes at virtuousgeek.org (Jesse Barnes)
- [PATCH 1/3] drm/i915: Wait for pending flips in intel_pipe_set_base()
- From: chris at chris-wilson.co.uk (Chris Wilson)
- [PATCH 1/3] drm/i915: Wait for pending flips in intel_pipe_set_base()
- From: ville.syrjala at linux.intel.com (Ville Syrjälä)
- [PATCH 4/4] drm/i915: don't rewrite the GTT on resume v4
- From: chris at chris-wilson.co.uk (Chris Wilson)
- [PATCH 4/4] drm/i915: don't rewrite the GTT on resume v3
- From: jbarnes at virtuousgeek.org (Jesse Barnes)
- [PATCH 4/4] drm/i915: don't rewrite the GTT on resume v4
- From: jbarnes at virtuousgeek.org (Jesse Barnes)
- [PATCH 3/4] drm/i915: protect RPS/RC6 related accesses (including PCU) with a new mutex
- From: jbarnes at virtuousgeek.org (Jesse Barnes)
- [PATCH 2/4] drm/i915: put ring frequency and turbo setup into a work queue v4
- From: jbarnes at virtuousgeek.org (Jesse Barnes)
- [PATCH 1/4] drm/i915: don't block resume on fb console resume v2
- From: jbarnes at virtuousgeek.org (Jesse Barnes)
- [PATCH 1/2] drm: add flags argument to crtc page_flip callback
- From: jbarnes at virtuousgeek.org (Jesse Barnes)
- [PATCH 8/8] drm/i915: add clock gating regs to VLV offset check function
- From: daniel at ffwll.ch (Daniel Vetter)
- [PATCH 1/3] drm/i915: Wait for pending flips in intel_pipe_set_base()
- From: chris at chris-wilson.co.uk (Chris Wilson)
- [PATCH 3/4] drm/i915: fix Haswell FDI link disable path
- From: daniel at ffwll.ch (Daniel Vetter)
- [PATCH 4/4] drm/i915: don't rewrite the GTT on resume v3
- From: chris at chris-wilson.co.uk (Chris Wilson)
- [PATCH 1/3] drm/i915: Wait for pending flips in intel_pipe_set_base()
- From: chris at chris-wilson.co.uk (Chris Wilson)
- [PATCH 1/3] drm/i915: Wait for pending flips in intel_pipe_set_base()
- From: ville.syrjala at linux.intel.com (Ville Syrjälä)
- [PATCH 3/4] drm/i915: protect RPS/RC6 related accesses (including PCU) with a new mutex
- From: chris at chris-wilson.co.uk (Chris Wilson)
- [PATCH 2/4] drm/i915: put ring frequency and turbo setup into a work queue v3
- From: chris at chris-wilson.co.uk (Chris Wilson)
- [PATCH 1/4] drm/i915: don't block resume on fb console resume
- From: chris at chris-wilson.co.uk (Chris Wilson)
- [PATCH v2 3b/3] drm/i915: Kill i915_gem_execbuffer_wait_for_flips()
- From: chris at chris-wilson.co.uk (Chris Wilson)
- [PATCH 2/3] drm/i915: Wake up pending flip waiters when the GPU hangs
- From: chris at chris-wilson.co.uk (Chris Wilson)
- [PATCH 1/3] drm/i915: Wait for pending flips in intel_pipe_set_base()
- From: chris at chris-wilson.co.uk (Chris Wilson)
- [PATCH 6/8] drm/i915: TLB invalidation with MI_FLUSH_DW requires a post-sync op
- From: chris at chris-wilson.co.uk (Chris Wilson)
- [PATCH 5/5] drm/i915: Move the remaining gtt code
- From: chris at chris-wilson.co.uk (Chris Wilson)
- [PATCH 3/5] drm/i915: Kill off now unused gen6+ AGP code
- From: chris at chris-wilson.co.uk (Chris Wilson)
- [PATCH v2 4/4] drm: hold event_lock while accessing vblank_event_list
- From: imre.deak at intel.com (Imre Deak)
- [PATCH v2 3/4] drm/exynos: fix lockdep for event_lock wrt. vbl_time_lock
- From: imre.deak at intel.com (Imre Deak)
- [PATCH v2 2/4] drm/exynos: call drm_vblank_put for each queued flip event
- From: imre.deak at intel.com (Imre Deak)
- [PATCH v2 1/4] drm/exynos: hold event_lock while accessing pageflip_event_list
- From: imre.deak at intel.com (Imre Deak)
- [PATCH v2 0/4] drm/exynos, intel: fix locking for flip/vbl event list
- From: imre.deak at intel.com (Imre Deak)
- [PATCH] drm/i915: remove HAS_eDP as unnecessary and inconsistent indirection
- From: daniel at ffwll.ch (Daniel Vetter)
- [RFC] Async flips
- From: ville.syrjala at linux.intel.com (Ville Syrjälä)
- [pull] drm-intel-next for 3.8
- From: daniel at ffwll.ch (Daniel Vetter)
- [PATCH] drm/i915: remove HAS_eDP as unnecessary and inconsistent indirection
- From: jani.nikula at intel.com (Jani Nikula)
- [PATCH] drm/i915: pass adjusted_mode to intel_choose_pipe_bpp_dither(), again
- From: daniel at ffwll.ch (Daniel Vetter)
- [PATCH 03/18] drm/i915: Fix location of stolen memory register for SandyBridge+
- From: chris at chris-wilson.co.uk (Chris Wilson)
- [PATCH] drm/i915: pass adjusted_mode to intel_choose_pipe_bpp_dither(), again
- From: jani.nikula at intel.com (Jani Nikula)
- [RFC] Async flips
- From: mario.kleiner at tuebingen.mpg.de (Mario Kleiner)
- [PATCH 1/2] drm: add flags argument to crtc page_flip callback
- From: mario.kleiner at tuebingen.mpg.de (Mario Kleiner)
- [PATCH 03/18] drm/i915: Fix location of stolen memory register for SandyBridge+
- From: ben at bwidawsk.net (Ben Widawsky)
- [PATCH 02/18] drm/i915: Fix detection of stolen base for gen2
- From: ben at bwidawsk.net (Ben Widawsky)
- [PATCH 3/4] drm/i915: fix Haswell FDI link disable path
- From: przanoni at gmail.com (Paulo Zanoni)
- [PATCH 2/4] drm/i915: fix Haswell FDI link training code
- From: przanoni at gmail.com (Paulo Zanoni)
- [PATCH] scripts: Add a dmesg filter to prettify ioctl traces
- From: paulepanter at users.sourceforge.net (Paul Menzel)
- [PATCH 2/4] drm/i915: fix Haswell FDI link training code
- From: przanoni at gmail.com (Paulo Zanoni)
- [PATCH 5/5] drm/i915: kill pch_init_clock_gating indirection
- From: daniel at ffwll.ch (Daniel Vetter)
- [PATCH 2/2] drm/i915: move panel connectors to the front
- From: daniel at ffwll.ch (Daniel Vetter)
- [PATCH 36/36] drm/i915: don't assert disabled FDI before disabling the FDI
- From: daniel at ffwll.ch (Daniel Vetter)
- [PATCH 4/4] drm/i915: use PIPECONF_INTERLACE_MASK_HSW on lpt_enable_pch_transcoder
- From: przanoni at gmail.com (Paulo Zanoni)
- [PATCH 3/4] drm/i915: fix Haswell FDI link disable path
- From: przanoni at gmail.com (Paulo Zanoni)
- [PATCH 2/4] drm/i915: fix Haswell FDI link training code
- From: przanoni at gmail.com (Paulo Zanoni)
- [PATCH 1/4] drm/i915: set the correct number of FDI lanes on Haswell
- From: przanoni at gmail.com (Paulo Zanoni)
- [PATCH v2] drm/i915: Add SURFLIVE register definitions
- From: daniel at ffwll.ch (Daniel Vetter)
- [PATCH 29/36] drm/i915: use PIPECONF_INTERLACE_MASK_HSW on lpt_enable_pch_transcoder
- From: daniel at ffwll.ch (Daniel Vetter)
- [PATCH v2 3b/3] drm/i915: Kill i915_gem_execbuffer_wait_for_flips()
- From: ville.syrjala at linux.intel.com (ville.syrjala at linux.intel.com)
- [PATCH 3a/3] drm/i915: Avoid i915_gem_execbuffer_wait_for_flips() on SNB+
- From: ville.syrjala at linux.intel.com (ville.syrjala at linux.intel.com)
- [PATCH 2/3] drm/i915: Wake up pending flip waiters when the GPU hangs
- From: ville.syrjala at linux.intel.com (ville.syrjala at linux.intel.com)
- [PATCH 1/3] drm/i915: Wait for pending flips in intel_pipe_set_base()
- From: ville.syrjala at linux.intel.com (ville.syrjala at linux.intel.com)
- [PATCH 0/3] drm/i915: i915_gem_execbuffer_wait_for_flips and other flip stuff
- From: ville.syrjala at linux.intel.com (ville.syrjala at linux.intel.com)
- dmesg filter
- From: damien.lespiau at intel.com (Damien Lespiau)
- [PATCH v2] drm/i915: Add SURFLIVE register definitions
- From: ville.syrjala at linux.intel.com (ville.syrjala at linux.intel.com)
- [PATCH 5/5] drm/i915: Move the remaining gtt code
- From: ben at bwidawsk.net (Ben Widawsky)
- [PATCH 4/5] drm/i915: flush system agent TLBs on SNB
- From: ben at bwidawsk.net (Ben Widawsky)
- [PATCH 3/5] drm/i915: Kill off now unused gen6+ AGP code
- From: ben at bwidawsk.net (Ben Widawsky)
- [PATCH 2/5] drm/i915: Calculate correct stolen size for GEN7+
- From: ben at bwidawsk.net (Ben Widawsky)
- [PATCH 1/5 v4] drm/i915: Stop using AGP layer for GEN6+
- From: ben at bwidawsk.net (Ben Widawsky)
- [PATCH] drm/i915: Flush outstanding unpin tasks before pageflipping
- From: jbarnes at virtuousgeek.org (Jesse Barnes)
- dmesg filter
- From: eric at anholt.net (Eric Anholt)
- [PATCH 29/36] drm/i915: use PIPECONF_INTERLACE_MASK_HSW on lpt_enable_pch_transcoder
- From: przanoni at gmail.com (Paulo Zanoni)
- [PATCH] drm/i915: Flush outstanding unpin tasks before pageflipping
- From: tvrtko.ursulin at onelan.co.uk (Tvrtko Ursulin)
- [PATCH 07/36] drm/i915: use the right FDI_RX_CTL register on Haswell
- From: przanoni at gmail.com (Paulo Zanoni)
- [PATCH] scripts: Add a dmesg filter to prettify ioctl traces
- From: damien.lespiau at gmail.com (Damien Lespiau)
- dmesg filter
- From: damien.lespiau at gmail.com (Damien Lespiau)
- [PATCH 5/5] drm/i915: kill pch_init_clock_gating indirection
- From: przanoni at gmail.com (Paulo Zanoni)
- [PATCH] drm/i915: Only check for valid PP_{ON, OFF}_DELAYS on pre ILK hardware
- From: daniel at ffwll.ch (Daniel Vetter)
- [PATCH 31/36] drm/i915: don't assert_pch_ports_disabled on LPT
- From: daniel at ffwll.ch (Daniel Vetter)
- [PATCH] drm/i915: Flush outstanding unpin tasks before pageflipping
- From: chris at chris-wilson.co.uk (Chris Wilson)
- [PATCH 4/5] drm/i915: implement WADP0ClockGatingDisable
- From: przanoni at gmail.com (Paulo Zanoni)
- [PATCH 29/36] drm/i915: use PIPECONF_INTERLACE_MASK_HSW on lpt_enable_pch_transcoder
- From: daniel at ffwll.ch (Daniel Vetter)
- [PATCH] drm/i915: CPT/PPT pch dp transcoder workaround
- From: przanoni at gmail.com (Paulo Zanoni)
- [PATCH 27/36] drm/i915: don't assert_pch_pll_enabled on lpt_enable_pch_transcoder
- From: daniel at ffwll.ch (Daniel Vetter)
- [PATCH] drm/i915: Flush outstanding unpin tasks before pageflipping
- From: jbarnes at virtuousgeek.org (Jesse Barnes)
- [PATCH 1/5] drm/i915: check whether the pch is the soulmate of the cpu
- From: przanoni at gmail.com (Paulo Zanoni)
- [PATCH] drm/i915: Only check for valid PP_{ON, OFF}_DELAYS on pre ILK hardware
- From: przanoni at gmail.com (Paulo Zanoni)
- [PATCH] drm/i915: Flush outstanding unpin tasks before pageflipping
- From: chris at chris-wilson.co.uk (Chris Wilson)
- [PATCH 19/36] drm/i915: rename intel_enable_pch_pll to ironlake_enable_pch_pll
- From: daniel at ffwll.ch (Daniel Vetter)
- [PATCH] drm/i915: CPT/PPT pch dp transcoder workaround
- From: jbarnes at virtuousgeek.org (Jesse Barnes)
- [PATCH] drm/i915: Flush outstanding unpin tasks before pageflipping
- From: jbarnes at virtuousgeek.org (Jesse Barnes)
- [PATCH] drm/i915: CPT/PPT pch dp transcoder workaround
- From: daniel at ffwll.ch (Daniel Vetter)
- [PATCH] drm/i915: Flush outstanding unpin tasks before pageflipping
- From: daniel at ffwll.ch (Daniel Vetter)
- [PATCH 18/36] drm/i915: don't write FDI_RX_TUSIZE on lpt_pch_enable
- From: daniel at ffwll.ch (Daniel Vetter)
- [PATCH] drm/i915: Flush outstanding unpin tasks before pageflipping
- From: chris at chris-wilson.co.uk (Chris Wilson)
- [PATCH 16/36] drm/i915: try each voltage twice at hsw_fdi_link_train
- From: daniel at ffwll.ch (Daniel Vetter)
- [PATCH 11/36] drm/i915: properly program FDI_RX_MISC pwrdn lane values on HSW
- From: daniel at ffwll.ch (Daniel Vetter)
- [PATCH 10/36] drm/i915: program the FDI RX TUSIZE register on hsw_fdi_link_train
- From: daniel at ffwll.ch (Daniel Vetter)
- [PATCH 07/36] drm/i915: use the right FDI_RX_CTL register on Haswell
- From: daniel at ffwll.ch (Daniel Vetter)
- [PATCH] drm/i915: Flush outstanding unpin tasks before pageflipping
- From: jbarnes at virtuousgeek.org (Jesse Barnes)
- [PATCH 06/36] drm/i915: train Haswell FDI at the right time
- From: daniel at ffwll.ch (Daniel Vetter)
- [PATCH 4/8] drm/i915: implement WaDisableVLVClockGating_VBIIssue on VLV
- From: antti.koskipaa at linux.intel.com (Antti Koskipää)
- [PATCH 4/8] drm/i915: implement WaDisableVLVClockGating_VBIIssue on VLV
- From: jbarnes at virtuousgeek.org (Jesse Barnes)
- [PATCH 4/8] drm/i915: implement WaDisableVLVClockGating_VBIIssue on VLV
- From: antti.koskipaa at linux.intel.com (Antti Koskipää)
- [PATCH 06/11] drm/i915: Check the framebuffer offset
- From: ville.syrjala at linux.intel.com (Ville Syrjälä)
- [PATCH 06/11] drm/i915: Check the framebuffer offset
- From: jbarnes at virtuousgeek.org (Jesse Barnes)
- [PATCH] drm/i915: CPT/PPT pch dp transcoder workaround
- From: jbarnes at virtuousgeek.org (Jesse Barnes)
- [PATCH 02/11] drm/i915: Add SURFLIVE register definitions
- From: ville.syrjala at linux.intel.com (Ville Syrjälä)
- [PATCH 02/11] drm/i915: Add SURFLIVE register definitions
- From: daniel at ffwll.ch (Daniel Vetter)
- [PATCH 06/11] drm/i915: Check the framebuffer offset
- From: daniel at ffwll.ch (Daniel Vetter)
- [PATCH 02/11] drm/i915: Add SURFLIVE register definitions
- From: ville.syrjala at linux.intel.com (Ville Syrjälä)
- [PATCH 06/11] drm/i915: Check the framebuffer offset
- From: ville.syrjala at linux.intel.com (Ville Syrjälä)
- [PATCH 01/11] drm/i915: Fix display pixel format handling
- From: chris at chris-wilson.co.uk (Chris Wilson)
- [PATCH 05/11] drm/i915: Check framebuffer stride more thoroughly
- From: ville.syrjala at linux.intel.com (Ville Syrjälä)
- [PATCH 01/11] drm/i915: Fix display pixel format handling
- From: ville.syrjala at linux.intel.com (Ville Syrjälä)
- [QA 11/01] Testing report for `drm-intel-testing` (was: Updated -next)
- From: yi.sun at intel.com (Sun, Yi)
- [PATCH 4/4] drm/doc: add new dp helpers into drm DocBook
- From: laurent.pinchart at ideasonboard.com (Laurent Pinchart)
- [PATCH 3/4] drm/doc: integrate fb helper reference into docs
- From: laurent.pinchart at ideasonboard.com (Laurent Pinchart)
- [PATCH 2/4] drm/doc: integrate crtc helper api into docbook
- From: laurent.pinchart at ideasonboard.com (Laurent Pinchart)
- [PATCH 1/4] drm/doc: Helpers are not a Midlayer!
- From: laurent.pinchart at ideasonboard.com (Laurent Pinchart)
- [PATCH 2/2] drm/i915: lock event_lock for drm_vblank_off()
- From: imre.deak at intel.com (Imre Deak)
- [PATCH] drm/i915: Flush outstanding unpin tasks before pageflipping
- From: chris at chris-wilson.co.uk (Chris Wilson)
- [PATCH 1/2] drm: fix order of event_lock wrt. vblank_time_clock
- From: imre.deak at intel.com (Imre Deak)
- [pull] drm-intel-fixes
- From: daniel at ffwll.ch (Daniel Vetter)
- [PATCH 1/2] drm/i915: Kill i915_gem_execbuffer_wait_for_flips()
- From: chris at chris-wilson.co.uk (Chris Wilson)
- [PATCH] drm/i915: move encoder->mode_set calls to crtc_mode_set
- From: daniel at ffwll.ch (Daniel Vetter)
- [PATCH] drm/i915: CPT/PPT pch dp transcoder workaround
- From: daniel.vetter at ffwll.ch (Daniel Vetter)
- [PATCH 1/2] drm/i915: Kill i915_gem_execbuffer_wait_for_flips()
- From: eric at anholt.net (Eric Anholt)
- [PATCH 11/11] drm/i915: Introduce intel_crtc_update_sarea_pos()
- From: daniel at ffwll.ch (Daniel Vetter)
- [PATCH 02/11] drm/i915: Add SURFLIVE register definitions
- From: daniel at ffwll.ch (Daniel Vetter)
- [PATCH] drm/i915: move encoder->mode_set calls to crtc_mode_set
- From: chris at chris-wilson.co.uk (Chris Wilson)
- [PATCH 2/2] drm/i915: lock event_lock for drm_vblank_off()
- From: daniel at ffwll.ch (Daniel Vetter)
- [PATCH 4/4] drm/i915: don't rewrite the GTT on resume v3
- From: jbarnes at virtuousgeek.org (Jesse Barnes)
- [PATCH 3/4] drm/i915: protect RPS/RC6 related accesses (including PCU) with a new mutex
- From: jbarnes at virtuousgeek.org (Jesse Barnes)
- [PATCH 2/4] drm/i915: put ring frequency and turbo setup into a work queue v3
- From: jbarnes at virtuousgeek.org (Jesse Barnes)
- [PATCH 1/4] drm/i915: don't block resume on fb console resume
- From: jbarnes at virtuousgeek.org (Jesse Barnes)
- [PATCH 2/2] drm/i915: lock event_lock for drm_vblank_off()
- From: imre.deak at intel.com (Imre Deak)
- [PATCH 1/2] drm: fix order of event_lock wrt. vblank_time_clock
- From: imre.deak at intel.com (Imre Deak)
- [PATCH 5/5] drm/i915: kill pch_init_clock_gating indirection
- From: daniel.vetter at ffwll.ch (Daniel Vetter)
- [PATCH 4/5] drm/i915: implement WADP0ClockGatingDisable
- From: daniel.vetter at ffwll.ch (Daniel Vetter)
- [PATCH 3/5] drm/i915: CPT/PPT pch transcoder workaround
- From: daniel.vetter at ffwll.ch (Daniel Vetter)
- [PATCH 2/5] drm/i915: drop unnecessary check from fdi_link_train code
- From: daniel.vetter at ffwll.ch (Daniel Vetter)
- [PATCH 1/5] drm/i915: check whether the pch is the soulmate of the cpu
- From: daniel.vetter at ffwll.ch (Daniel Vetter)
- [PATCH 0/5] ivb fdi b/c fixes
- From: daniel.vetter at ffwll.ch (Daniel Vetter)
- [PATCH 2/3] drm/i915: put ring frequency and turbo setup into a work queue v2
- From: jbarnes at virtuousgeek.org (Jesse Barnes)
- [PATCH 11/11] drm/i915: Introduce intel_crtc_update_sarea_pos()
- From: jbarnes at virtuousgeek.org (Jesse Barnes)
- [PATCH 08/11] drm/i915: Bad pixel formats can't reach the sprite code
- From: jbarnes at virtuousgeek.org (Jesse Barnes)
- [PATCH 07/11] drm/i915: pixel_size == cpp
- From: jbarnes at virtuousgeek.org (Jesse Barnes)
- [PATCH 06/11] drm/i915: Check the framebuffer offset
- From: jbarnes at virtuousgeek.org (Jesse Barnes)
- [PATCH 05/11] drm/i915: Check framebuffer stride more thoroughly
- From: jbarnes at virtuousgeek.org (Jesse Barnes)
- [PATCH 02/11] drm/i915: Add SURFLIVE register definitions
- From: jbarnes at virtuousgeek.org (Jesse Barnes)
- [PATCH 01/11] drm/i915: Fix display pixel format handling
- From: jbarnes at virtuousgeek.org (Jesse Barnes)
- [PATCH 36/36] drm/i915: don't assert disabled FDI before disabling the FDI
- From: przanoni at gmail.com (Paulo Zanoni)
- [PATCH 35/36] drm/i915: don't limit Haswell CRT encoder to pipe A
- From: przanoni at gmail.com (Paulo Zanoni)
- [PATCH 34/36] drm/i915: don't intel_disable_pch_pll on Haswell/LPT
- From: przanoni at gmail.com (Paulo Zanoni)
- [PATCH 33/36] drm/i915: implement timing override workarounds on LPT
- From: przanoni at gmail.com (Paulo Zanoni)
- [PATCH 32/36] drm/i915: use CPU and PCH transcoders on lpt_disable_pch_transcoder
- From: przanoni at gmail.com (Paulo Zanoni)
- [PATCH 31/36] drm/i915: don't assert_pch_ports_disabled on LPT
- From: przanoni at gmail.com (Paulo Zanoni)
- [PATCH 30/36] drm/i915: don't rely on previous values when setting LPT TRANSCONF
- From: przanoni at gmail.com (Paulo Zanoni)
- [PATCH 29/36] drm/i915: use PIPECONF_INTERLACE_MASK_HSW on lpt_enable_pch_transcoder
- From: przanoni at gmail.com (Paulo Zanoni)
- [PATCH 28/36] drm/i915: use CPU and PCH transcoders on lpt_enable_pch_transcoder
- From: przanoni at gmail.com (Paulo Zanoni)
- [PATCH 27/36] drm/i915: don't assert_pch_pll_enabled on lpt_enable_pch_transcoder
- From: przanoni at gmail.com (Paulo Zanoni)
- [PATCH 26/36] drm/i915: remove IBX code from lpt_enable_pch_transcoder
- From: przanoni at gmail.com (Paulo Zanoni)
- [PATCH 25/36] drm/i915: remove Haswell code from ironlake_enable_pch_transcoder
- From: przanoni at gmail.com (Paulo Zanoni)
- [PATCH 24/36] drm/i915: fork lpt version of ironlake_{en, dis}able_pch_transcoder
- From: przanoni at gmail.com (Paulo Zanoni)
- [PATCH 23/36] drm/i915: rename intel_{en, dis}able_transcoder
- From: przanoni at gmail.com (Paulo Zanoni)
- [PATCH 22/36] drm/i915: use the CPU and PCH transcoders on lpt_pch_enable
- From: przanoni at gmail.com (Paulo Zanoni)
- [PATCH 21/36] drm/i915: don't assert_panel_unlocked on LPT
- From: przanoni at gmail.com (Paulo Zanoni)
- [PATCH 20/36] drm/i915: don't call ironlake_enable_pch_pll on lpt_pch_enable
- From: przanoni at gmail.com (Paulo Zanoni)
- [PATCH 19/36] drm/i915: rename intel_enable_pch_pll to ironlake_enable_pch_pll
- From: przanoni at gmail.com (Paulo Zanoni)
- [PATCH 18/36] drm/i915: don't write FDI_RX_TUSIZE on lpt_pch_enable
- From: przanoni at gmail.com (Paulo Zanoni)
- [PATCH 17/36] drm/i915: fix Haswell FDI link disable path
- From: przanoni at gmail.com (Paulo Zanoni)
- [PATCH 16/36] drm/i915: try each voltage twice at hsw_fdi_link_train
- From: przanoni at gmail.com (Paulo Zanoni)
- [PATCH 15/36] drm/i915: change Haswell FDI link training error messages
- From: przanoni at gmail.com (Paulo Zanoni)
- [PATCH 14/36] drm/i915: disable FDI_RX_ENABLE, not FDI_RX_PLL_ENABLE
- From: przanoni at gmail.com (Paulo Zanoni)
- [PATCH 13/36] drm/i915: remove an useless indentation level on hsw_fdi_link_train
- From: przanoni at gmail.com (Paulo Zanoni)
- [PATCH 12/36] drm/i915: wait only 35us for the FDI link training
- From: przanoni at gmail.com (Paulo Zanoni)
- [PATCH 11/36] drm/i915: properly program FDI_RX_MISC pwrdn lane values on HSW
- From: przanoni at gmail.com (Paulo Zanoni)
- [PATCH 10/36] drm/i915: program the FDI RX TUSIZE register on hsw_fdi_link_train
- From: przanoni at gmail.com (Paulo Zanoni)
- [PATCH 09/36] drm/i915: don't rely on DDI_BUF_CTL previous values
- From: przanoni at gmail.com (Paulo Zanoni)
- [PATCH 08/36] drm/i915: set the correct number of FDI lanes on Haswell
- From: przanoni at gmail.com (Paulo Zanoni)
- [PATCH 07/36] drm/i915: use the right FDI_RX_CTL register on Haswell
- From: przanoni at gmail.com (Paulo Zanoni)
- [PATCH 06/36] drm/i915: train Haswell FDI at the right time
- From: przanoni at gmail.com (Paulo Zanoni)
- [PATCH 05/36] drm/i915: remove ironlake bits from lpt_pch_enable
- From: przanoni at gmail.com (Paulo Zanoni)
- [PATCH 04/36] drm/i915: remove Haswell/LPT bits from ironlake_pch_enable
- From: przanoni at gmail.com (Paulo Zanoni)
- [PATCH 03/36] drm/i915: add lpt_pch_enable
- From: przanoni at gmail.com (Paulo Zanoni)
- [PATCH 02/36] drm/i915: use intel_ddi_get_hw_state on CRT encoder too
- From: przanoni at gmail.com (Paulo Zanoni)
- [PATCH 01/36] drm/i915: don't set ADPA pipe select on LPT
- From: przanoni at gmail.com (Paulo Zanoni)
- [PATCH 00/36] Haswell VGA fixes
- From: przanoni at gmail.com (Paulo Zanoni)
- [PATCH 2/2] drm/i915: move panel connectors to the front
- From: ajax at redhat.com (Adam Jackson)
- [PATCH 1/2] drm: add helper to sort panels to the head of the connector list
- From: ajax at redhat.com (Adam Jackson)
- [PATCH 2/2] drm/i915: add async flip support on gen7
- From: jbarnes at virtuousgeek.org (Jesse Barnes)
- [PATCH] drm/i915: Only check for valid PP_{ON, OFF}_DELAYS on pre ILK hardware
- From: damien.lespiau at gmail.com (Damien Lespiau)
- [PATCH 1/2] drm/i915: Kill i915_gem_execbuffer_wait_for_flips()
- From: ville.syrjala at linux.intel.com (Ville Syrjälä)
- [RFC] Async flips
- From: ville.syrjala at linux.intel.com (Ville Syrjälä)
- [PATCH 04/11] drm/i915: Factor out i9xx_compute_clocks() like ironlake_compute_clocks()
- From: daniel at ffwll.ch (Daniel Vetter)
- [PATCH] drm/i915: move encoder->mode_set calls to crtc_mode_set
- From: daniel.vetter at ffwll.ch (Daniel Vetter)
- [PATCH 2/2] drm/i915: Wait for pending flips in intel_pipe_set_base()
- From: ville.syrjala at linux.intel.com (Ville Syrjälä)
- [PATCH 5/5] drm/i915: kill pch_init_clock_gating indirection
- From: przanoni at gmail.com (Paulo Zanoni)
- [PATCH 2/2] drm/i915: add async flip support on gen7
- From: eric at anholt.net (Eric Anholt)
- [PATCH 4/5] drm/i915: implement WADP0ClockGatingDisable
- From: przanoni at gmail.com (Paulo Zanoni)
- [RFC] Async flips
- From: eric at anholt.net (Eric Anholt)
- [PATCH 2/2] drm/i915: Wait for pending flips in intel_pipe_set_base()
- From: chris at chris-wilson.co.uk (Chris Wilson)
- [PATCH] intel: Allocate swrast buffer (#54782)
- From: eric at anholt.net (Eric Anholt)
- [PATCH 5/9] drm/i915: CPT/PPT pch dp transcoder workaround
- From: przanoni at gmail.com (Paulo Zanoni)
- [PATCH 2/2] drm/i915: Wait for pending flips in intel_pipe_set_base()
- From: ville.syrjala at linux.intel.com (ville.syrjala at linux.intel.com)
- [PATCH 1/2] drm/i915: Kill i915_gem_execbuffer_wait_for_flips()
- From: ville.syrjala at linux.intel.com (ville.syrjala at linux.intel.com)
- [PATCH 0/2] drm/i915: Page flip stuff
- From: ville.syrjala at linux.intel.com (ville.syrjala at linux.intel.com)
- [PATCH 1/5] drm/i915: check whether the pch is the soulmate of the cpu
- From: przanoni at gmail.com (Paulo Zanoni)
- [PATCH v2] drm/i915: Error out when trying to set a y-tiled as a sprite
- From: ville.syrjala at linux.intel.com (Ville Syrjälä)
- [PATCH 2/5] drm/i915: drop unnecessary check from fdi_link_train code
- From: przanoni at gmail.com (Paulo Zanoni)
- [PATCH 04/11] drm/i915: Factor out i9xx_compute_clocks() like ironlake_compute_clocks()
- From: ville.syrjala at linux.intel.com (Ville Syrjälä)
- [PATCH 04/11] drm/i915: Factor out i9xx_compute_clocks() like ironlake_compute_clocks()
- From: daniel at ffwll.ch (Daniel Vetter)
- [RFC] Async flips
- From: jbarnes at virtuousgeek.org (Jesse Barnes)
- [RFC] Async flips
- From: ville.syrjala at linux.intel.com (Ville Syrjälä)
- [RFC] Async flips
- From: daniel at ffwll.ch (Daniel Vetter)
- [PATCH 03/11] drm/i915: Implement execbuffer wait for all planes
- From: chris at chris-wilson.co.uk (Chris Wilson)
- [PATCH 6/9 v3] drm/i915: Stop using AGP layer for GEN6+
- From: ben at bwidawsk.net (Ben Widawsky)
- [PATCH 11/11] drm/i915: Introduce intel_crtc_update_sarea_pos()
- From: ville.syrjala at linux.intel.com (ville.syrjala at linux.intel.com)
- [PATCH 10/11] drm/i915: Constify mode argument to intel_modeset_adjusted_mode()
- From: ville.syrjala at linux.intel.com (ville.syrjala at linux.intel.com)
- [PATCH 09/11] drm/i915: Consitify adjusted_mode parameter
- From: ville.syrjala at linux.intel.com (ville.syrjala at linux.intel.com)
- [PATCH 08/11] drm/i915: Bad pixel formats can't reach the sprite code
- From: ville.syrjala at linux.intel.com (ville.syrjala at linux.intel.com)
- [PATCH 07/11] drm/i915: pixel_size == cpp
- From: ville.syrjala at linux.intel.com (ville.syrjala at linux.intel.com)
- [PATCH 06/11] drm/i915: Check the framebuffer offset
- From: ville.syrjala at linux.intel.com (ville.syrjala at linux.intel.com)
- [PATCH 05/11] drm/i915: Check framebuffer stride more thoroughly
- From: ville.syrjala at linux.intel.com (ville.syrjala at linux.intel.com)
- [PATCH 04/11] drm/i915: Factor out i9xx_compute_clocks() like ironlake_compute_clocks()
- From: ville.syrjala at linux.intel.com (ville.syrjala at linux.intel.com)
- [PATCH 03/11] drm/i915: Implement execbuffer wait for all planes
- From: ville.syrjala at linux.intel.com (ville.syrjala at linux.intel.com)
- [PATCH 02/11] drm/i915: Add SURFLIVE register definitions
- From: ville.syrjala at linux.intel.com (ville.syrjala at linux.intel.com)
- [PATCH 01/11] drm/i915: Fix display pixel format handling
- From: ville.syrjala at linux.intel.com (ville.syrjala at linux.intel.com)
- [PATCH 00/11] drm/i915: Patches cherry-picked from drm_atomic
- From: ville.syrjala at linux.intel.com (ville.syrjala at linux.intel.com)
- [RFC] Async flips
- From: chris at chris-wilson.co.uk (Chris Wilson)
- [RFC] Async flips
- From: jbarnes at virtuousgeek.org (Jesse Barnes)
- [RFC] Async flips
- From: daniel at ffwll.ch (Daniel Vetter)
- [RFC] Async flips
- From: jbarnes at virtuousgeek.org (Jesse Barnes)
- [RFC] Async flips
- From: ville.syrjala at linux.intel.com (Ville Syrjälä)
- [PATCH] drm/i915: implement WaMbcDriverBootEnable on Haswell
- From: jani.nikula at linux.intel.com (Jani Nikula)
- [PATCH 05/10] drm/i915: move more pte encoding to pte encode
- From: daniel at ffwll.ch (Daniel Vetter)
- [PATCH 06/10 v2] drm/i915: Stop using AGP layer for GEN6+
- From: chris at chris-wilson.co.uk (Chris Wilson)
- [PATCH 6/9 v3] drm/i915: Stop using AGP layer for GEN6+
- From: daniel at ffwll.ch (Daniel Vetter)
- [PATCH 4/4] drm/doc: add new dp helpers into drm DocBook
- From: daniel.vetter at ffwll.ch (Daniel Vetter)
- [PATCH 3/4] drm/doc: integrate fb helper reference into docs
- From: daniel.vetter at ffwll.ch (Daniel Vetter)
- [PATCH 2/4] drm/doc: integrate crtc helper api into docbook
- From: daniel.vetter at ffwll.ch (Daniel Vetter)
- [PATCH 1/4] drm/doc: Helpers are not a Midlayer!
- From: daniel.vetter at ffwll.ch (Daniel Vetter)
- [PATCH] drm/i915/ringbuffer: exclude last 2 cachelines on 845g on all callpaths
- From: daniel at ffwll.ch (Daniel Vetter)
- [PATCH 3/3] drm/i915: don't rewrite the GTT on resume v2
- From: jbarnes at virtuousgeek.org (Jesse Barnes)
- [PATCH 3/3] drm/i915: don't rewrite the GTT on resume v2
- From: daniel at ffwll.ch (Daniel Vetter)
- [PATCH 9/9] drm/i915: create the DDI encoder
- From: daniel at ffwll.ch (Daniel Vetter)
- [PATCH 3/3] drm/i915: don't rewrite the GTT on resume v2
- From: chris at chris-wilson.co.uk (Chris Wilson)
- [PATCH] drm/i915: Fix HSW power well control state read
- From: daniel at ffwll.ch (Daniel Vetter)
- [PATCH] drm/i915: Flush using only the correct base address register
- From: daniel at ffwll.ch (Daniel Vetter)
- [PATCH 2/2] drm/i915: add async flip support on gen7
- From: jbarnes at virtuousgeek.org (Jesse Barnes)
- [PATCH 1/2] drm: add flags argument to crtc page_flip callback
- From: jbarnes at virtuousgeek.org (Jesse Barnes)
- [RFC] Async flips
- From: jbarnes at virtuousgeek.org (Jesse Barnes)
- [PATCH 3/3] drm/i915: don't rewrite the GTT on resume v2
- From: daniel at ffwll.ch (Daniel Vetter)
- 3.7.0-rc3 GPU hang, i915_error_state included
- From: guialemas at gmail.com (Guilherme M. Schroeder)
- [PATCH 2/3] drm/i915: put ring frequency and turbo setup into a work queue v2
- From: daniel at ffwll.ch (Daniel Vetter)
- [PATCH 2/3] drm/i915: put ring frequency and turbo setup into a work queue v2
- From: daniel at ffwll.ch (Daniel Vetter)
- [PATCH 2/3] drm/i915: put ring frequency and turbo setup into a work queue v2
- From: rodrigo.vivi at gmail.com (Rodrigo Vivi)
- [PATCH 2/3] drm/i915: put ring frequency and turbo setup into a work queue v2
- From: jbarnes at virtuousgeek.org (Jesse Barnes)
- [PATCH 1/3] drm/i915: don't block resume on fb console resume
- From: rodrigo.vivi at gmail.com (Rodrigo Vivi)
- [PATCH] intel: Allocate swrast buffer (#54782)
- From: frederic.plourde at collabora.co.uk (Frederic Plourde)
- [PATCH 2/3] drm/i915: put ring frequency and turbo setup into a work queue v2
- From: rodrigo.vivi at gmail.com (Rodrigo Vivi)
- [PATCH 9/9] drm/i915: create the DDI encoder
- From: damien.lespiau at intel.com (Damien Lespiau)
- [PATCH 8/9] drm/i915: add intel_ddi_connector_get_hw_state
- From: damien.lespiau at intel.com (Damien Lespiau)
- [PATCH 7/9] drm/i915: add port field to intel_digital_port
- From: damien.lespiau at intel.com (Damien Lespiau)
- [PATCH 6/9] drm/i915: reset intel_encoder->type when DP or HDMI is detected
- From: damien.lespiau at intel.com (Damien Lespiau)
- [PATCH 5/9] drm/i915: split intel_dp_init into encoder and connector pieces
- From: damien.lespiau at intel.com (Lespiau, Damien)
- [PATCH 4/9] drm/i915: split intel_hdmi_init into encoder and connector pieces
- From: damien.lespiau at intel.com (Lespiau, Damien)
- [PATCH 3/9] drm/i915: create intel_digital_port and use it
- From: damien.lespiau at intel.com (Lespiau, Damien)
- [PATCH 2/9] drm/i915: add intel_dp_to_dev and intel_hdmi_to_dev
- From: damien.lespiau at intel.com (Lespiau, Damien)
- [PATCH 1/9] drm/i915: simplify assignments inside intel_dp.c
- From: damien.lespiau at intel.com (Lespiau, Damien)
- [PATCH] drm/i915: Fix HSW power well control state read
- From: zhenyuw at linux.intel.com (Zhenyu Wang)
- [PATCH] drm/i915: Flush using only the correct base address register
- From: przanoni at gmail.com (Paulo Zanoni)
- [PATCH 1/2] drm: add helper to sort panels to the head of the connector list
- From: laurent.pinchart at ideasonboard.com (Laurent Pinchart)
- [PATCH 5/5] drm/i915: kill pch_init_clock_gating indirection
- From: daniel.vetter at ffwll.ch (Daniel Vetter)
- [PATCH 4/5] drm/i915: implement WADP0ClockGatingDisable
- From: daniel.vetter at ffwll.ch (Daniel Vetter)
- [PATCH 3/5] drm/i915: CPT/PPT pch dp transcoder workaround
- From: daniel.vetter at ffwll.ch (Daniel Vetter)
- [PATCH 2/5] drm/i915: drop unnecessary check from fdi_link_train code
- From: daniel.vetter at ffwll.ch (Daniel Vetter)
- [PATCH 1/5] drm/i915: check whether the pch is the soulmate of the cpu
- From: daniel.vetter at ffwll.ch (Daniel Vetter)
- [PATCH 2/5] drm/i915: implement WaDisableRenderCachePipelinedFlush
- From: daniel at ffwll.ch (Daniel Vetter)
- [PATCH] drm/i915: fix FDI_RX_CHICKEN register read masking
- From: daniel at ffwll.ch (Daniel Vetter)
- [PATCH 2/2] drm/i915: adjust sprite base address
- From: daniel at ffwll.ch (Daniel Vetter)
- [PATCH] drm/i915: Fix primary plane offset on HSW
- From: daniel at ffwll.ch (Daniel Vetter)
- [PATCH v2] drm/i915: Error out when trying to set a y-tiled as a sprite
- From: daniel at ffwll.ch (Daniel Vetter)
- [PATCH] drm/i915/tv: Use intel_flush_display_plane() to flush the primary plane
- From: daniel at ffwll.ch (Daniel Vetter)
- [PATCH] drm/i915: fix FDI_RX_CHICKEN register read masking
- From: daniel at ffwll.ch (Daniel Vetter)
- [PATCH] drm/i915/tv: Use intel_flush_display_plane() to flush the primary plane
- From: przanoni at gmail.com (Paulo Zanoni)
- [PATCH] drm/i915: Fix primary plane offset on HSW
- From: przanoni at gmail.com (Paulo Zanoni)
- [3.0.y, 3.2.y, 3.4.y] Please add LVDS patch for the Zotac ZBOX SD ID13
- From: greg at kroah.com (Greg KH)
- [PATCH] drm/i915: fix FDI_RX_CHICKEN register read masking
- From: damien.lespiau at intel.com (Lespiau, Damien)
- [PATCH] drm/i915: check fdi B/C lane sharing constraint
- From: daniel at ffwll.ch (Daniel Vetter)
- [PATCH] drm/i915: fix FDI_RX_CHICKEN register read masking
- From: jani.nikula at intel.com (Jani Nikula)
- [PATCH 5/9] drm/i915: CPT/PPT pch dp transcoder workaround
- From: daniel at ffwll.ch (Daniel Vetter)
- [PATCH 5/9] drm/i915: CPT/PPT pch dp transcoder workaround
- From: przanoni at gmail.com (Paulo Zanoni)
- [PATCH v2] drm/i915: Error out when trying to set a y-tiled as a sprite
- From: jbarnes at virtuousgeek.org (Jesse Barnes)
- [PATCH] drm/i915: Error out when trying to set a y-tiled as a sprite
- From: jbarnes at virtuousgeek.org (Jesse Barnes)
- [PATCH] drm/i915: Error out when trying to set a y-tiled as a sprite
- From: ville.syrjala at linux.intel.com (Ville Syrjälä)
- [PATCH 5/9] drm/i915: CPT/PPT pch dp transcoder workaround
- From: daniel at ffwll.ch (Daniel Vetter)
- [PATCH] drm/i915/tv: Use intel_flush_display_plane() to flush the primary plane
- From: damien.lespiau at gmail.com (Damien Lespiau)
- [PATCH] drm/i915: Flush using only the correct base address register
- From: damien.lespiau at gmail.com (Damien Lespiau)
- [PATCH] drm/i915: Error out when trying to set a y-tiled as a sprite
- From: damien.lespiau at intel.com (Lespiau, Damien)
- [PATCH v2] drm/i915: Error out when trying to set a y-tiled as a sprite
- From: damien.lespiau at gmail.com (Damien Lespiau)
- [PATCH] drm/i915/ringbuffer: exclude last 2 cachelines on 845g on all callpaths
- From: mika.kuoppala at linux.intel.com (Mika Kuoppala)
- [PATCH libdrm] libkms: fix the name of the intel driver in linux_sysfs_create
- From: conselvan2 at gmail.com (Ander Conselvan de Oliveira)
- [PATCH] drm/i915: Fix primary plane offset on HSW
- From: przanoni at gmail.com (Paulo Zanoni)
- [PATCH] drm/i915: Fix primary plane offset on HSW
- From: damien.lespiau at gmail.com (Damien Lespiau)
- [PATCH] drm/i915: check fdi B/C lane sharing constraint
- From: przanoni at gmail.com (Paulo Zanoni)
- [PATCH] drm/i915: add comment about pch pll enabling rules
- From: przanoni at gmail.com (Paulo Zanoni)
- [PATCH] drm/i915: clarify why we need to enable fdi plls so early
- From: przanoni at gmail.com (Paulo Zanoni)
- [PATCH 6/9 v3] drm/i915: Stop using AGP layer for GEN6+
- From: ben at bwidawsk.net (Ben Widawsky)
- [PATCH 01/18] drm: Introduce drm_mm_create_block()
- From: ben at bwidawsk.net (Ben Widawsky)
- [PATCH 01/18] drm: Introduce drm_mm_create_block()
- From: ben at bwidawsk.net (Ben Widawsky)
- [PATCH 03/18] drm/i915: Fix location of stolen memory register for SandyBridge+
- From: ben at bwidawsk.net (Ben Widawsky)
- [PATCH 3/3] drm/i915: don't rewrite the GTT on resume v2
- From: chris at chris-wilson.co.uk (Chris Wilson)
- [PATCH] drm/i915: Error out when trying to set a y-tiled as a sprite
- From: chris at chris-wilson.co.uk (Chris Wilson)
- [PATCH 01/18] drm: Introduce drm_mm_create_block()
- From: chris at chris-wilson.co.uk (Chris Wilson)
- [PATCH 03/18] drm/i915: Fix location of stolen memory register for SandyBridge+
- From: chris at chris-wilson.co.uk (Chris Wilson)
- [PATCH 2/2] drm/i915: move panel connectors to the front
- From: chris at chris-wilson.co.uk (Chris Wilson)
- [3.0.y, 3.2.y, 3.4.y] Please add LVDS patch for the Zotac ZBOX SD ID13
- From: ben at decadent.org.uk (Ben Hutchings)
- [PATCH] drm/i915: add comment about pch pll enabling rules
- From: daniel.vetter at ffwll.ch (Daniel Vetter)
- [PATCH] drm/i915: check fdi B/C lane sharing constraint
- From: daniel.vetter at ffwll.ch (Daniel Vetter)
- [PATCH 2/2] drm/i915: move panel connectors to the front
- From: daniel.vetter at ffwll.ch (Daniel Vetter)
- [PATCH 1/2] drm: add helper to sort panels to the head of the connector list
- From: daniel.vetter at ffwll.ch (Daniel Vetter)
- [PATCH 2/9] drm/i915: Write the FDI RX TU size reg at the right time
- From: daniel.vetter at ffwll.ch (Daniel Vetter)
- [PATCH] drm/i915: clarify why we need to enable fdi plls so early
- From: daniel.vetter at ffwll.ch (Daniel Vetter)
- [PATCH] drm/i915: Write the FDI RX TU size reg at the right time
- From: daniel.vetter at ffwll.ch (Daniel Vetter)
- [PATCH 2/9] drm/i915: Write the FDI RX TU size reg at the right time
- From: przanoni at gmail.com (Paulo Zanoni)
- Updated -testing
- From: daniel at ffwll.ch (Daniel Vetter)
- [PATCH 1/2] drm/i915: Fix sprite offset on HSW
- From: przanoni at gmail.com (Paulo Zanoni)
- [PATCH 2/9] drm/i915: Write the FDI RX TU size reg at the right time
- From: daniel.vetter at ffwll.ch (Daniel Vetter)
- [PATCH 9/9] drm/i915: check fdi B/C lane sharing constraint
- From: daniel.vetter at ffwll.ch (Daniel Vetter)
- [PATCH 2/9] drm/i915: Write the FDI RX TU size reg at the right time
- From: przanoni at gmail.com (Paulo Zanoni)
- [PATCH 2/9] drm/i915: Write the FDI RX TU size reg at the right time
- From: daniel.vetter at ffwll.ch (Daniel Vetter)
- [PATCH 4/9] drm/i915: add comment about pch pll enabling rules
- From: daniel.vetter at ffwll.ch (Daniel Vetter)
- [PATCH 9/9] drm/i915: check fdi B/C lane sharing constraint
- From: przanoni at gmail.com (Paulo Zanoni)
- [PATCH 8/9] drm/i915: add ->display.modeset_global_resources callback
- From: przanoni at gmail.com (Paulo Zanoni)
- [PATCH 4/9] drm/i915: add comment about pch pll enabling rules
- From: przanoni at gmail.com (Paulo Zanoni)
- [PATCH 3/9] drm/i915: set FDI_RX_MISC to recommended values on CPT/PPT
- From: przanoni at gmail.com (Paulo Zanoni)
- [PATCH 2/9] drm/i915: Write the FDI RX TU size reg at the right time
- From: przanoni at gmail.com (Paulo Zanoni)
- [PATCH 04/18] drm/i915: Avoid clearing preallocated regions from the GTT
- From: ben at bwidawsk.net (Ben Widawsky)
- [PATCH 03/18] drm/i915: Fix location of stolen memory register for SandyBridge+
- From: ben at bwidawsk.net (Ben Widawsky)
- [PATCH 01/18] drm: Introduce drm_mm_create_block()
- From: ben at bwidawsk.net (Ben Widawsky)
- [PATCH 9/9] drm/i915: create the DDI encoder
- From: przanoni at gmail.com (Paulo Zanoni)
- [PATCH 8/9] drm/i915: add intel_ddi_connector_get_hw_state
- From: przanoni at gmail.com (Paulo Zanoni)
- [PATCH 7/9] drm/i915: add port field to intel_digital_port
- From: przanoni at gmail.com (Paulo Zanoni)
- [PATCH 6/9] drm/i915: reset intel_encoder->type when DP or HDMI is detected
- From: przanoni at gmail.com (Paulo Zanoni)
- [PATCH 5/9] drm/i915: split intel_dp_init into encoder and connector pieces
- From: przanoni at gmail.com (Paulo Zanoni)
- [PATCH 4/9] drm/i915: split intel_hdmi_init into encoder and connector pieces
- From: przanoni at gmail.com (Paulo Zanoni)
- [PATCH 3/9] drm/i915: create intel_digital_port and use it
- From: przanoni at gmail.com (Paulo Zanoni)
- [PATCH 2/9] drm/i915: add intel_dp_to_dev and intel_hdmi_to_dev
- From: przanoni at gmail.com (Paulo Zanoni)
- [PATCH 1/9] drm/i915: simplify assignments inside intel_dp.c
- From: przanoni at gmail.com (Paulo Zanoni)
- [PATCH 0/9] Haswell DDI encoder (DP + HDMI on the same port)
- From: przanoni at gmail.com (Paulo Zanoni)
- [PATCH 00/10] Kill AGP dependencies for Gen6+
- From: ben at bwidawsk.net (Ben Widawsky)
- [PATCH 09/10 v2] drm/i915: flush system agent TLBs on SNB
- From: ben at bwidawsk.net (Ben Widawsky)
- [PATCH 06/10 v2] drm/i915: Stop using AGP layer for GEN6+
- From: ben at bwidawsk.net (Ben Widawsky)
- [PATCH 10/10] drm/i915: Kill off actually requiring AGP
- From: ben at bwidawsk.net (Ben Widawsky)
- [PATCH] drm/i915: make default minimum frequency RP1 instead of RPN
- From: jbarnes at virtuousgeek.org (Jesse Barnes)
- [PATCH] drm/i915: debug print all of the DPCD we have
- From: daniel at ffwll.ch (Daniel Vetter)
- [PATCH] drm/i915: make default minimum frequency RP1 instead of RPN
- From: eric at anholt.net (Eric Anholt)
- [PATCH] meh, failure to git add
- From: daniel.vetter at ffwll.ch (Daniel Vetter)
- [PATCH] meh, failure to git add
- From: jani.nikula at linux.intel.com (Jani Nikula)
- [PATCH] drm/i915: Error out when trying to set a y-tiled as a sprite
- From: jbarnes at virtuousgeek.org (Jesse Barnes)
- [PATCH] drm/i915: Error out when trying to set a y-tiled as a sprite
- From: damien.lespiau at gmail.com (Damien Lespiau)
- [PATCH 2/2] drm/i915: adjust sprite base address
- From: damien.lespiau at gmail.com (Damien Lespiau)
- [PATCH 1/2] drm/i915: Fix sprite offset on HSW
- From: damien.lespiau at gmail.com (Damien Lespiau)
- [PATCH] drm/i915: make default minimum frequency RP1 instead of RPN
- From: jbarnes at virtuousgeek.org (Jesse Barnes)
- [PATCH 3/3] drm/i915: don't rewrite the GTT on resume v2
- From: jbarnes at virtuousgeek.org (Jesse Barnes)
- [PATCH 2/3] drm/i915: put ring frequency and turbo setup into a work queue v2
- From: jbarnes at virtuousgeek.org (Jesse Barnes)
- [PATCH 1/3] drm/i915: don't block resume on fb console resume
- From: jbarnes at virtuousgeek.org (Jesse Barnes)
- [PATCH 6/8] drm/i915: TLB invalidation with MI_FLUSH_DW requires a post-sync op
- From: jbarnes at virtuousgeek.org (Jesse Barnes)
- [PATCH] drm/i915: VLV does not have a sprite scaler
- From: daniel at ffwll.ch (Daniel Vetter)
- [PATCH] drm/i915: VLV does not have a sprite scaler
- From: jbarnes at virtuousgeek.org (Jesse Barnes)
- [PATCH] drm/i915: implement WaMbcDriverBootEnable on Haswell
- From: przanoni at gmail.com (Paulo Zanoni)
- [PATCH] drm/i915: VLV does not have a sprite scaler
- From: jbarnes at virtuousgeek.org (Jesse Barnes)
- [PATCH] drm/i915: Only kick out vesafb if we takeover the fbcon with KMS
- From: daniel at ffwll.ch (Daniel Vetter)
- [PATCH] drm/i915: be less verbose about inability to provide vendor backlight
- From: daniel at ffwll.ch (Daniel Vetter)
- [PATCH 7/9] drm/i915: drop unnecessary check from fdi_link_train code
- From: przanoni at gmail.com (Paulo Zanoni)
- [PATCH 6/9] drm/i915: BUG on impossible pch dp port
- From: przanoni at gmail.com (Paulo Zanoni)
- [PATCH 5/9] drm/i915: CPT/PPT pch dp transcoder workaround
- From: przanoni at gmail.com (Paulo Zanoni)
- [PATCH 1/9] drm/i915: shut up spurious message in intel_dp_get_hw_state
- From: przanoni at gmail.com (Paulo Zanoni)
- [PATCH 0/3] drm/i915: eDP scaling mode change support
- From: przanoni at gmail.com (Paulo Zanoni)
- [PATCH] drm/i915: Fix sprite offset on HSW
- From: przanoni at gmail.com (Paulo Zanoni)
- [PATCH 6/8] drm/i915: TLB invalidation with MI_FLUSH_DW requires a post-sync op
- From: chris at chris-wilson.co.uk (Chris Wilson)
- [PATCH] drm/i915: Only kick out vesafb if we takeover the fbcon with KMS
- From: chris at chris-wilson.co.uk (Chris Wilson)
- [PATCH 11/24] drm: Introduce an iterator over holes in the drm_mm range manager
- From: chris at chris-wilson.co.uk (Chris Wilson)
- [PATCH] xdrm/i915: Respect HW RC6 states availability
- From: chris at chris-wilson.co.uk (Chris Wilson)
- [PATCH] drm/i915: Fix sprite offset on HSW
- From: daniel at ffwll.ch (Daniel Vetter)
- [PATCH] drm/i915: Fix sprite offset on HSW
- From: chris at chris-wilson.co.uk (Chris Wilson)
- [PATCH 3/3] drm/i915/dp: change eDP default scaling mode to respect aspect ratio
- From: jani.nikula at intel.com (Jani Nikula)
- [PATCH 2/3] drm/i915/dp: allow configuring eDP panel fitting scaling mode
- From: jani.nikula at intel.com (Jani Nikula)
- [PATCH 1/3] drm/i915/lvds: move fitting mode from intel_lvds_connector to intel_panel
- From: jani.nikula at intel.com (Jani Nikula)
- [PATCH 0/3] drm/i915: eDP scaling mode change support
- From: jani.nikula at intel.com (Jani Nikula)
- [PATCH 9/9] drm/i915: check fdi B/C lane sharing constraint
- From: daniel.vetter at ffwll.ch (Daniel Vetter)
- [PATCH 8/9] drm/i915: add ->display.modeset_global_resources callback
- From: daniel.vetter at ffwll.ch (Daniel Vetter)
- [PATCH 7/9] drm/i915: drop unnecessary check from fdi_link_train code
- From: daniel.vetter at ffwll.ch (Daniel Vetter)
- [PATCH 6/9] drm/i915: BUG on impossible pch dp port
- From: daniel.vetter at ffwll.ch (Daniel Vetter)
- [PATCH 5/9] drm/i915: CPT/PPT pch dp transcoder workaround
- From: daniel.vetter at ffwll.ch (Daniel Vetter)
- [PATCH 4/9] drm/i915: add comment about pch pll enabling rules
- From: daniel.vetter at ffwll.ch (Daniel Vetter)
- [PATCH 3/9] drm/i915: set FDI_RX_MISC to recommended values on CPT/PPT
- From: daniel.vetter at ffwll.ch (Daniel Vetter)
- [PATCH 2/9] drm/i915: Write the FDI RX TU size reg at the right time
- From: daniel.vetter at ffwll.ch (Daniel Vetter)
- [PATCH 1/9] drm/i915: shut up spurious message in intel_dp_get_hw_state
- From: daniel.vetter at ffwll.ch (Daniel Vetter)
- [PATCH 0/9] some ivb fdi b/c fixes
- From: daniel.vetter at ffwll.ch (Daniel Vetter)
- [PATCH] meh, failure to git add
- From: daniel.vetter at ffwll.ch (Daniel Vetter)
- [PATCH 2/2] drm/i915/sdvo: restore i2c adapter config on intel_sdvo_init() failures
- From: daniel at ffwll.ch (Daniel Vetter)
- [PATCH] drm/i915: Fix sprite offset on HSW
- From: mika.kuoppala at linux.intel.com (Mika Kuoppala)
- [PATCH 2/2] drm/i915/sdvo: restore i2c adapter config on intel_sdvo_init() failures
- From: jani.nikula at intel.com (Jani Nikula)
- [PATCH 01/10] drm/i915: No LLC_MLC for HSW.
- From: ben at bwidawsk.net (Ben Widawsky)
[Index of Archives]
[Linux USB]
[Video for Linux]
[Linux SCSI]
[Samba]
[Yosemite News]
