Hi
2012/10/26 Daniel Vetter <daniel.vetter at ffwll.ch>:
> We need to set the timing override chicken bit after fdi link training
> has completed and before we enable the dp transcoder. We also have to
> clear that bit again after disabling the pch dp transcoder.
>
> See "Graphics BSpec: vol4g North Display Engine Registers [IVB],
> Display Mode Set Sequence" and "Graphics BSpec: vol4h South Display
> Engine Registers [CPT, PPT], South Display Engine Transcoder and FDI
> Control, Transcoder Debug and DFT, TRANS_CHICKEN_2" bit 31:
>
> "Workaround : Enable the override prior to enabling the transcoder.
> Disable the override after disabling the transcoder."
>
> While at it, use the _PIPE macro for the other TRANS_DP register.
What confuses me is that the bit name is actually "Autotrain TimingGen
Override" and after a quick check it seems we don't use autotrain.
Also, by looking at the IVB mode set sequence it seems Auto Train is
the *recommended* method since manual is listed as "testing only". So
I'm not sure if we need this code now, but it seems we could try to
implement the auto train...
Also, I'd move the code that sets/unsets the chicken bit to
intel_enable_transcoder/intel_disable_transcoder.
>
> Signed-off-by: Daniel Vetter <daniel.vetter at ffwll.ch>
> ---
> drivers/gpu/drm/i915/i915_reg.h | 8 +++++++-
> drivers/gpu/drm/i915/intel_display.c | 15 ++++++++++++++-
> 2 files changed, 21 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
> index c7c4b96..84b09ee 100644
> --- a/drivers/gpu/drm/i915/i915_reg.h
> +++ b/drivers/gpu/drm/i915/i915_reg.h
> @@ -4062,7 +4062,7 @@
> #define TRANS_DP_CTL_A 0xe0300
> #define TRANS_DP_CTL_B 0xe1300
> #define TRANS_DP_CTL_C 0xe2300
> -#define TRANS_DP_CTL(pipe) (TRANS_DP_CTL_A + (pipe) * 0x01000)
> +#define TRANS_DP_CTL(pipe) _PIPE(pipe, TRANS_DP_CTL_A, TRANS_DP_CTL_B)
> #define TRANS_DP_OUTPUT_ENABLE (1<<31)
> #define TRANS_DP_PORT_SEL_B (0<<29)
> #define TRANS_DP_PORT_SEL_C (1<<29)
> @@ -4082,6 +4082,12 @@
> #define TRANS_DP_HSYNC_ACTIVE_LOW 0
> #define TRANS_DP_SYNC_MASK (3<<3)
>
> +#define TRANS_CHICKEN_2_A 0xf0064
> +#define TRANS_CHICKEN_2_B 0xf1064
> +#define TRANS_CHICKEN_2_C 0xf2064
> +#define TRANS_CHICKEN_2(pipe) _PIPE(pipe, TRANS_CHICKEN_2_A, TRANS_CHICKEN_2_B)
> +#define TRANS_CHICKEN2_TIMING_OVERRIDE (1<<31)
> +
> /* SNB eDP training params */
> /* SNB A-stepping */
> #define EDP_LINK_TRAIN_400MV_0DB_SNB_A (0x38<<22)
> diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
> index aa80ecb..8ab0fa5 100644
> --- a/drivers/gpu/drm/i915/intel_display.c
> +++ b/drivers/gpu/drm/i915/intel_display.c
> @@ -2687,7 +2687,6 @@ static void ironlake_fdi_pll_enable(struct intel_crtc *intel_crtc)
> int pipe = intel_crtc->pipe;
> u32 reg, temp;
>
> -
> /* enable PCH FDI RX PLL, wait warmup plus DMI latency */
> reg = FDI_RX_CTL(pipe);
> temp = I915_READ(reg);
> @@ -3060,6 +3059,14 @@ static void ironlake_pch_enable(struct drm_crtc *crtc)
> (intel_pipe_has_type(crtc, INTEL_OUTPUT_DISPLAYPORT) ||
> intel_pipe_has_type(crtc, INTEL_OUTPUT_EDP))) {
> u32 bpc = (I915_READ(PIPECONF(pipe)) & PIPE_BPC_MASK) >> 5;
> +
> + /* Workaround: Set the timing override bit before enabling the
> + * DP pch transcoder. */
> + reg = TRANS_CHICKEN2(pipe);
> + temp = I915_READ(reg);
> + temp |= TRANS_CHICKEN2_TIMING_OVERRIDE;
> + I915_WRITE(reg, temp);
> +
> reg = TRANS_DP_CTL(pipe);
> temp = I915_READ(reg);
> temp &= ~(TRANS_DP_PORT_SEL_MASK |
> @@ -3365,6 +3372,12 @@ static void ironlake_crtc_disable(struct drm_crtc *crtc)
> BUG(); /* wtf */
> }
> I915_WRITE(PCH_DPLL_SEL, temp);
> +
> + /* Workaround: Clear the timing override chicken bit again. */
> + reg = TRANS_CHICKEN2(pipe);
> + temp = I915_READ(reg);
> + temp &= ~TRANS_CHICKEN2_TIMING_OVERRIDE;
> + I915_WRITE(reg, temp);
> }
>
> /* disable PCH DPLL */
> --
> 1.7.11.4
>
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx at lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/intel-gfx
--
Paulo Zanoni
