Linux Device Tree
[Prev Page][Next Page]
- [PATCH 2/2] arm64: dts: rockchip: Add CM3588 NAS board
- From: Sebastian Kropatsch <seb-dev@xxxxxx>
- Re: [PATCH v2 0/3] Add support for the IPQ5321 SoC
- From: Kathiravan Thirumoorthy <quic_kathirav@xxxxxxxxxxx>
- [PATCH] arm64: dts: qcom: sdm850-lenovo-yoga-c630: add WiFi calibration variant
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- [PATCH] arm64: dts: qcom: sdm850-lenovo-yoga-c630: fix IPA firmware path
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- Re: [PATCH v5 5/5] clk: imx: clk-audiomix: Corrent parent clock for earc_phy and audpll
- From: Shengjiu Wang <shengjiu.wang@xxxxxxxxx>
- Re: [PATCH RESEND, v6 6/8] mailbox: mediatek: Add CMDQ secure mailbox driver
- From: CK Hu (胡俊光) <ck.hu@xxxxxxxxxxxx>
- Re: [PATCH v5 2/5] clk: imx: clk-audiomix: Add reset controller
- From: Shengjiu Wang <shengjiu.wang@xxxxxxxxx>
- [PATCH v3 3/3] Input: novatek-nvt-ts: add support for NT36672A touchscreen
- From: Joel Selvaraj via B4 Relay <devnull+joelselvaraj.oss.gmail.com@xxxxxxxxxx>
- [PATCH v3 2/3] dt-bindings: input: document Novatek NVT touchscreen controller
- From: Joel Selvaraj via B4 Relay <devnull+joelselvaraj.oss.gmail.com@xxxxxxxxxx>
- [PATCH v3 1/3] Input: novatek-nvt-ts: replace generic i2c device id with specific IC variant
- From: Joel Selvaraj via B4 Relay <devnull+joelselvaraj.oss.gmail.com@xxxxxxxxxx>
- [PATCH v3 0/3] novatek-nvt-ts: add support for NT36672A touchscreen
- From: Joel Selvaraj via B4 Relay <devnull+joelselvaraj.oss.gmail.com@xxxxxxxxxx>
- Re: [PATCH v5 2/5] soc: qcom: llcc: Add regmap for Broadcast_AND region
- From: Bjorn Andersson <andersson@xxxxxxxxxx>
- Re: [PATCH] arm64: dts: qcom: msm8996: add reset for display subsystem
- From: Bjorn Andersson <andersson@xxxxxxxxxx>
- Re: [PATCH] ARM: dts: qcom: msm8226-microsoft-common: Enable smbb explicitly
- From: Bjorn Andersson <andersson@xxxxxxxxxx>
- Re: [RESEND PATCH v3] arm64: dts: qcom: msm8916/39-samsung-a2015: Add PMIC and charger
- From: Bjorn Andersson <andersson@xxxxxxxxxx>
- Re: [PATCH] arm64: dts: qcom: msm8916-samsung-fortuna/rossa: Add connector for MUIC
- From: Bjorn Andersson <andersson@xxxxxxxxxx>
- Re: [PATCH v2] arm64: dts: qcom: sc7280: Remove CTS/RTS configuration
- From: Bjorn Andersson <andersson@xxxxxxxxxx>
- Re: [PATCH v2] arm64: dts: qcom: qcm6490-rb3: Enable gpi-dma and qup node
- From: Bjorn Andersson <andersson@xxxxxxxxxx>
- Re: [PATCH] arm64: dts: qcom: qcs6490-rb3gen2: Enable PMK8350 RTC module
- From: Bjorn Andersson <andersson@xxxxxxxxxx>
- Re: (subset) [PATCH 0/3] arm64: qcom: Add cpufreq and clock support
- From: Bjorn Andersson <andersson@xxxxxxxxxx>
- Re: (subset) [PATCH 0/6] Add some devicetree node for SDX75
- From: Bjorn Andersson <andersson@xxxxxxxxxx>
- Re: (subset) [PATCH v2 0/2] arm64: qcom: sa8775p: add support for x4 EP PCIe controller
- From: Bjorn Andersson <andersson@xxxxxxxxxx>
- Re: (subset) [PATCH v11 0/3] arm64: qcom: sa8775p: add support for EP PCIe
- From: Bjorn Andersson <andersson@xxxxxxxxxx>
- Re: [PATCH v3 0/3] Add devicetree support of USB for QDU/QRU1000
- From: Bjorn Andersson <andersson@xxxxxxxxxx>
- Re: [PATCH] arm64: dts: qcom: sdx75: Add modem SMP2P node
- From: Bjorn Andersson <andersson@xxxxxxxxxx>
- Re: [PATCH v5 0/3] arm64: qcom-sm8[456]50: properly describe the PCIe Gen4x2 PHY AUX clock
- From: Bjorn Andersson <andersson@xxxxxxxxxx>
- Re: (subset) [PATCH v4 0/3] arm64: qcom: sm8650: add support for the SM8650-HDK board
- From: Bjorn Andersson <andersson@xxxxxxxxxx>
- Re: [PATCH] arm64: dts: qcom: sm8650-hdk: enable GPU
- From: Bjorn Andersson <andersson@xxxxxxxxxx>
- Re: (subset) [PATCH v2 00/21] Add PCIe bridge node in DT for Qcom SoCs
- From: Bjorn Andersson <andersson@xxxxxxxxxx>
- Re: [PATCH] arm64: dts: qocm: sdx75: align smem node name with coding style
- From: Bjorn Andersson <andersson@xxxxxxxxxx>
- Re: [PATCH] arm64: dts: qcom: x1e80100-*: Allocate some CMA buffers
- From: Bjorn Andersson <andersson@xxxxxxxxxx>
- Re: (subset) [PATCH 00/13] arm64: dts: qcom: fix PHY-related warnings
- From: Bjorn Andersson <andersson@xxxxxxxxxx>
- Re: [PATCH 00/12] arm64: dts: qcom: move common USB-related properties to SoC dtsi
- From: Bjorn Andersson <andersson@xxxxxxxxxx>
- Re: [PATCH] arm64: dts: qcom: sc8180x: Fix LLCC reg property again
- From: Bjorn Andersson <andersson@xxxxxxxxxx>
- Re: [PATCH] arm64: dts: qcom: sc8180x: Fix aoss_qmp node
- From: Bjorn Andersson <andersson@xxxxxxxxxx>
- Re: [PATCH] arm64: dts: qcom: sc8180x: Drop ipa-virt interconnect
- From: Bjorn Andersson <andersson@xxxxxxxxxx>
- Re: [PATCH] arm64: dts: qcom: sc8180x: Correct PCIe slave ports
- From: Bjorn Andersson <andersson@xxxxxxxxxx>
- Re: [PATCH v3 0/3] Add devicetree support of USB for QDU/QRU1000
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- [PATCH 1/2] dt-bindings: arm: rockchip: Add CM3588 NAS
- From: Sebastian Kropatsch <seb-dev@xxxxxx>
- Re: [PATCH v3 0/3] Add devicetree support of USB for QDU/QRU1000
- From: Bjorn Andersson <andersson@xxxxxxxxxx>
- [PATCH v2 2/2] arm64: dts: allwinner: Correct the model names for Pine64 boards
- From: Dragan Simic <dsimic@xxxxxxxxxxx>
- [PATCH v2 0/2] Correct the model names and descriptions for Pine64 boards
- From: Dragan Simic <dsimic@xxxxxxxxxxx>
- [PATCH v2 1/2] dt-bindings: arm: sunxi: Correct the descriptions for Pine64 boards
- From: Dragan Simic <dsimic@xxxxxxxxxxx>
- Re: [PATCH v3 2/6] firmware: qcom_scm: Add gpu_init_regs call
- From: Bjorn Andersson <andersson@xxxxxxxxxx>
- [PATCH 0/2] RK3588: FriendlyElec CM3588 NAS board support
- From: Sebastian Kropatsch <seb-dev@xxxxxx>
- [PATCH v3 2/2] input: add driver for Hynitron CST816X touchscreen
- From: Oleh Kuzhylnyi <kuzhylol@xxxxxxxxx>
- [PATCH v3 1/2] dt-bindings: input: touchscreen: add Hynitron CST816X
- From: Oleh Kuzhylnyi <kuzhylol@xxxxxxxxx>
- Re: [PATCH 1/2] dt-bindings: cpufreq: cpufreq-qcom-hw: Add sc8180x compatible
- From: Bjorn Andersson <andersson@xxxxxxxxxx>
- [PATCH v2 3/3] hwmon: g672: add support for g761
- From: Christian Marangi <ansuelsmth@xxxxxxxxx>
- [PATCH v2 2/3] dt-bindings: hwmon: g76x: Add support for g761
- From: Christian Marangi <ansuelsmth@xxxxxxxxx>
- [PATCH v2 1/3] dt-bindings: hwmon: g762: Convert to yaml schema
- From: Christian Marangi <ansuelsmth@xxxxxxxxx>
- Re: [PATCH] dt-bindings: arm-smmu: Fix Qualcomm SC8180X binding
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH] dt-bindings: interrupt-controller: qcom,pdc: Add sc8180x PDC
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH 1/2] dt-bindings: cpufreq: cpufreq-qcom-hw: Add sc8180x compatible
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH 05/10] dt-bindings: usb: qcom,dwc3: Add SC8180X compatibles
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH 03/10] dt-bindings: clock: qcom: Add missing USB MP resets
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH 01/10] dt-bindings: phy: qcom,sc8280xp-qmp-usb3-uni: Add sc8180x USB3 compatible
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- [PATCH v9 02/10] media: imagination: Add E5010 JPEG Encoder driver
- From: Devarsh Thakkar <devarsht@xxxxxx>
- [PATCH v9 01/10] media: dt-bindings: Add Imagination E5010 JPEG Encoder
- From: Devarsh Thakkar <devarsht@xxxxxx>
- [PATCH v9 00/10] Add V4L2 M2M Driver for E5010 JPEG Encoder
- From: Devarsh Thakkar <devarsht@xxxxxx>
- Re: [PATCH RFC v2 1/8] spi: dt-bindings: spi-peripheral-props: add spi-offloads property
- From: Conor Dooley <conor@xxxxxxxxxx>
- Re: [PATCH 1/2] dt-bindings: arm: sunxi: Correct the descriptions for Pine64 boards
- From: Dragan Simic <dsimic@xxxxxxxxxxx>
- Re: [PATCH RESEND,v6 2/8] dt-bindings: mailbox: Add property for CMDQ secure driver
- From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
- Re: [PATCH v4 3/5] media: mali-c55: Add Mali-C55 ISP driver
- From: Sakari Ailus <sakari.ailus@xxxxxx>
- Re: [PATCH RFC v2 1/8] spi: dt-bindings: spi-peripheral-props: add spi-offloads property
- From: Conor Dooley <conor@xxxxxxxxxx>
- Re: [PATCH RFC v2 1/8] spi: dt-bindings: spi-peripheral-props: add spi-offloads property
- From: Conor Dooley <conor@xxxxxxxxxx>
- Re: [PATCH v4 1/3] dt-bindings: mailbox: Add mediatek,gce-props.yaml
- From: Jason-JH Lin (林睿祥) <Jason-JH.Lin@xxxxxxxxxxxx>
- [PATCH RESEND,v6 6/8] mailbox: mediatek: Add CMDQ secure mailbox driver
- From: "Jason-JH.Lin" <jason-jh.lin@xxxxxxxxxxxx>
- [PATCH RESEND,v6 8/8] soc: mediatek: mtk-cmdq: Add secure cmdq_pkt APIs
- From: "Jason-JH.Lin" <jason-jh.lin@xxxxxxxxxxxx>
- [PATCH RESEND,v6 7/8] mailbox: mediatek: Add secure CMDQ driver support for CMDQ driver
- From: "Jason-JH.Lin" <jason-jh.lin@xxxxxxxxxxxx>
- [PATCH RESEND,v6 4/8] mailbox: mtk-cmdq: Support GCE loop packets in interrupt handler
- From: "Jason-JH.Lin" <jason-jh.lin@xxxxxxxxxxxx>
- [PATCH RESEND,v6 3/8] soc: mediatek: cmdq: Add cmdq_pkt_logic_command to support math operation
- From: "Jason-JH.Lin" <jason-jh.lin@xxxxxxxxxxxx>
- [PATCH RESEND,v6 5/8] mailbox: mediatek: Move reuseable definition to header for secure driver
- From: "Jason-JH.Lin" <jason-jh.lin@xxxxxxxxxxxx>
- [PATCH RESEND,v6 2/8] dt-bindings: mailbox: Add property for CMDQ secure driver
- From: "Jason-JH.Lin" <jason-jh.lin@xxxxxxxxxxxx>
- [PATCH RESEND,v6 1/8] dt-bindings: gce: mt8195: Add CMDQ_SYNC_TOKEN_SECURE_THR_EOF event id
- From: "Jason-JH.Lin" <jason-jh.lin@xxxxxxxxxxxx>
- [PATCH RESEND,v6 0/8] Add CMDQ secure driver for SVP
- From: "Jason-JH.Lin" <jason-jh.lin@xxxxxxxxxxxx>
- Re: [PATCH v2 3/3] hwmon: (ltc2992) Use fwnode_for_each_available_child_node_scoped()
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v4 10/10] drivers: iio: imu: Add support for adis1657x family
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v4 10/10] drivers: iio: imu: Add support for adis1657x family
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v4 08/10] iio: imu: adis16475: Re-define ADIS16475_DATA
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v4 04/10] iio: imu: adis_buffer: Add buffer setup API with buffer attributes
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 3/6] iio: chemical: add driver for ENS160 sensor
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v2 3/3] riscv: dts: thead: Enable I2C on the BeagleV-Ahead
- From: Emil Renner Berthing <emil.renner.berthing@xxxxxxxxxxxxx>
- Re: [PATCH v2 2/3] riscv: dts: thead: Add TH1520 I2C nodes
- From: Emil Renner Berthing <emil.renner.berthing@xxxxxxxxxxxxx>
- [PATCH v6 2/2] backlight: Add new lm3509 backlight driver
- From: Patrick Gansterer <paroga@xxxxxxxxxx>
- [PATCH v6 0/2] backlight: Add new lm3509 backlight driver
- From: Patrick Gansterer <paroga@xxxxxxxxxx>
- [PATCH v6 1/2] dt-bindings: backlight: Add Texas Instruments LM3509
- From: Patrick Gansterer <paroga@xxxxxxxxxx>
- [PATCH] iio: accel: st_accel: add LIS2DS12
- From: Kaustabh Chakraborty <kauschluss@xxxxxxxxxxx>
- Re: [PATCH v6 6/8] mailbox: mediatek: Add CMDQ secure mailbox driver
- From: kernel test robot <lkp@xxxxxxxxx>
- Re: [PATCH v6 2/8] dt-bindings: mailbox: Add property for CMDQ secure driver
- From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
- Re: [PATCH 3/6] iio: chemical: add driver for ENS160 sensor
- From: Gustavo Silva <gustavograzs@xxxxxxxxx>
- [PATCH v6 1/7] drm/mediatek: Add interface to allocate MediaTek GEM buffer
- From: "Jason-JH.Lin" <jason-jh.lin@xxxxxxxxxxxx>
- [PATCH v6 6/7] drm/mediatek: Add secure flow support to mediatek-drm
- From: "Jason-JH.Lin" <jason-jh.lin@xxxxxxxxxxxx>
- [PATCH v6 3/7] drm/mediatek: Add secure buffer control flow to mtk_drm_gem
- From: "Jason-JH.Lin" <jason-jh.lin@xxxxxxxxxxxx>
- [PATCH v6 5/7] drm/mediatek: Add mtk_ddp_sec_write() to config secure buffer info
- From: "Jason-JH.Lin" <jason-jh.lin@xxxxxxxxxxxx>
- [PATCH v6 7/7] drm/mediatek: Add cmdq_insert_backup_cookie before secure pkt finalize
- From: "Jason-JH.Lin" <jason-jh.lin@xxxxxxxxxxxx>
- [PATCH v6 0/7] Add mediate-drm secure flow for SVP
- From: "Jason-JH.Lin" <jason-jh.lin@xxxxxxxxxxxx>
- [PATCH v6 4/7] drm/mediatek: Add secure identify flag and funcution to mtk_drm_plane
- From: "Jason-JH.Lin" <jason-jh.lin@xxxxxxxxxxxx>
- [PATCH v6 2/7] drm/mediatek/uapi: Add DRM_MTK_GEM_CREATE_RESTRICTED flag
- From: "Jason-JH.Lin" <jason-jh.lin@xxxxxxxxxxxx>
- Re: [PATCH 1/2] dt-bindings: display: panel: Add WL-355608-A8 panel
- From: "Ryan Walklin" <ryan@xxxxxxxxxxxxx>
- [PATCH v6 6/8] mailbox: mediatek: Add CMDQ secure mailbox driver
- From: "Jason-JH.Lin" <jason-jh.lin@xxxxxxxxxxxx>
- [PATCH v6 8/8] soc: mediatek: mtk-cmdq: Add secure cmdq_pkt APIs
- From: "Jason-JH.Lin" <jason-jh.lin@xxxxxxxxxxxx>
- [PATCH v6 3/8] soc: mediatek: cmdq: Add cmdq_pkt_logic_command to support math operation
- From: "Jason-JH.Lin" <jason-jh.lin@xxxxxxxxxxxx>
- [PATCH v6 4/8] mailbox: mtk-cmdq: Support GCE loop packets in interrupt handler
- From: "Jason-JH.Lin" <jason-jh.lin@xxxxxxxxxxxx>
- [PATCH v6 5/8] mailbox: mediatek: Move reuseable definition to header for secure driver
- From: "Jason-JH.Lin" <jason-jh.lin@xxxxxxxxxxxx>
- [PATCH v6 7/8] mailbox: mediatek: Add secure CMDQ driver support for CMDQ driver
- From: "Jason-JH.Lin" <jason-jh.lin@xxxxxxxxxxxx>
- [PATCH v6 0/8] Add CMDQ secure driver for SVP
- From: "Jason-JH.Lin" <jason-jh.lin@xxxxxxxxxxxx>
- [PATCH v6 2/8] dt-bindings: mailbox: Add property for CMDQ secure driver
- From: "Jason-JH.Lin" <jason-jh.lin@xxxxxxxxxxxx>
- [PATCH v6 1/8] dt-bindings: gce: mt8195: Add CMDQ_SYNC_TOKEN_SECURE_THR_EOF event id
- From: "Jason-JH.Lin" <jason-jh.lin@xxxxxxxxxxxx>
- Re: [PATCH 1/2] dt-bindings: display: panel: Add WL-355608-A8 panel
- From: きくちゃんさん <kikuchan98@xxxxxxxxx>
- [RFC] dt-bindings: media: video-interfaces: How to describe physical lanes for CSI-2 C-PHY
- From: Niklas Söderlund <niklas.soderlund@xxxxxxxxxxxx>
- Re: [PATCH 1/2] dt-bindings: display: panel: Add WL-355608-A8 panel
- From: "Ryan Walklin" <ryan@xxxxxxxxxxxxx>
- Re: [PATCH 10/10] arm64: dts: qcom: sc8180x-lenovo-flex-5g: Enable USB multiport controller
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- Re: [PATCH] arm64: dts: qcom: sc8180x: Drop ipa-virt interconnect
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- Re: [PATCH 09/10] arm64: dts: qcom: sc8180x-primus: Enable the two MP USB ports
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- Re: [PATCH 08/10] arm64: dts: qcom: sc8180x: Add USB MP controller and phys
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- Re: [PATCH 06/10] arm64: dts: qcom: sc8180x-pmics: Add second PMC8180 GPIO
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- Re: [PATCH 02/10] phy: qcom-qmp-usb: Add sc8180x USB UNIPHY
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- Re: [PATCH] arm64: dts: qcom: sc8180x: Correct PCIe slave ports
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- Re: [PATCH] arm64: dts: qcom: sc8180x: Fix aoss_qmp node
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- Re: [PATCH] arm64: dts: qcom: sc8180x: Add UFS PHY power-domain
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- Re: [PATCH 2/2] arm64: dts: qcom: sc8180x: Correct cpufreq compatible
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- Re: [PATCH] arm64: dts: qcom: sc8180x: Fix LLCC reg property again
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- Re: [PATCH] arm64: dts: qcom: msm8996: add reset for display subsystem
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- Re: [PATCH 2/3] dt-bindings: hwmon: g76x: Add support for g761
- From: Guenter Roeck <linux@xxxxxxxxxxxx>
- Re: [PATCH 1/2] dt-bindings: arm: fsl: rename gw7905 to gw75xx
- From: Tim Harvey <tharvey@xxxxxxxxxxxxx>
- Re: [PATCH v4] dt-bindings: gpio: lsi,zevio-gpio: convert to dtschema
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- Re: [PATCH v2 02/10] dt-bindings: mfd: bd96801 PMIC core
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- Re: [PATCH v24 4/4] dt-binding: clock: remove nuvoton npcm845-clk bindings
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- Re: [PATCH v2 01/10] dt-bindings: ROHM BD96801 PMIC regulators
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH 1/2] dt-bindings: arm: fsl: rename gw7905 to gw75xx
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- Re: [PATCH] arm64: dts: qcom: msm8996: add reset for display subsystem
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- Re: [PATCH] arm64: dts: qcom: msm8996: add reset for display subsystem
- From: Markus Elfring <Markus.Elfring@xxxxxx>
- [PATCH] arm64: dts: qcom: sc8180x: Drop ipa-virt interconnect
- From: Bjorn Andersson <andersson@xxxxxxxxxx>
- [PATCH] dt-bindings: interrupt-controller: qcom,pdc: Add sc8180x PDC
- From: Bjorn Andersson <andersson@xxxxxxxxxx>
- [PATCH 10/10] arm64: dts: qcom: sc8180x-lenovo-flex-5g: Enable USB multiport controller
- From: Bjorn Andersson <andersson@xxxxxxxxxx>
- [PATCH 09/10] arm64: dts: qcom: sc8180x-primus: Enable the two MP USB ports
- From: Bjorn Andersson <andersson@xxxxxxxxxx>
- [PATCH 08/10] arm64: dts: qcom: sc8180x: Add USB MP controller and phys
- From: Bjorn Andersson <andersson@xxxxxxxxxx>
- [PATCH 07/10] arm64: dts: qcom: sc8180x: Align USB nodes with binding
- From: Bjorn Andersson <andersson@xxxxxxxxxx>
- [PATCH 06/10] arm64: dts: qcom: sc8180x-pmics: Add second PMC8180 GPIO
- From: Bjorn Andersson <andersson@xxxxxxxxxx>
- [PATCH 05/10] dt-bindings: usb: qcom,dwc3: Add SC8180X compatibles
- From: Bjorn Andersson <andersson@xxxxxxxxxx>
- [PATCH 04/10] clk: qcom: gcc-sc8180x: Add missing USB MP resets
- From: Bjorn Andersson <andersson@xxxxxxxxxx>
- [PATCH 03/10] dt-bindings: clock: qcom: Add missing USB MP resets
- From: Bjorn Andersson <andersson@xxxxxxxxxx>
- [PATCH 02/10] phy: qcom-qmp-usb: Add sc8180x USB UNIPHY
- From: Bjorn Andersson <andersson@xxxxxxxxxx>
- [PATCH 01/10] dt-bindings: phy: qcom,sc8280xp-qmp-usb3-uni: Add sc8180x USB3 compatible
- From: Bjorn Andersson <andersson@xxxxxxxxxx>
- [PATCH 00/10] arm64: dts: qcom: sc8180x: Enable the USB multiport controller
- From: Bjorn Andersson <andersson@xxxxxxxxxx>
- [PATCH] dt-bindings: arm-smmu: Fix Qualcomm SC8180X binding
- From: Bjorn Andersson <andersson@xxxxxxxxxx>
- [PATCH] arm64: dts: qcom: sc8180x: Correct PCIe slave ports
- From: Bjorn Andersson <andersson@xxxxxxxxxx>
- Re: [PATCH v2 2/8] dt-bindings: counter: Add new ti,am62-eqep compatible
- From: David Lechner <david@xxxxxxxxxxxxxx>
- [PATCH] arm64: dts: qcom: sc8180x: Fix aoss_qmp node
- From: Bjorn Andersson <andersson@xxxxxxxxxx>
- [PATCH] arm64: dts: qcom: sc8180x: Add UFS PHY power-domain
- From: Bjorn Andersson <andersson@xxxxxxxxxx>
- [PATCH 2/2] arm64: dts: qcom: sc8180x: Correct cpufreq compatible
- From: Bjorn Andersson <andersson@xxxxxxxxxx>
- [PATCH 1/2] dt-bindings: cpufreq: cpufreq-qcom-hw: Add sc8180x compatible
- From: Bjorn Andersson <andersson@xxxxxxxxxx>
- [PATCH 0/2] arm64: dts: qcom: sc8180x: Fix CPUfreq compatible
- From: Bjorn Andersson <andersson@xxxxxxxxxx>
- [PATCH] arm64: dts: qcom: sc8180x: Fix LLCC reg property again
- From: Bjorn Andersson <andersson@xxxxxxxxxx>
- Re: [PATCH RFC v3 4/9] dt-bindings: arm: qcom: Update Devicetree identifiers
- From: Conor Dooley <conor@xxxxxxxxxx>
- [PATCH 1/2] arm64: phygate-tauri-l enable pcie phy
- From: Parthiban Nallathambi <parthiban@xxxxxxxxxxx>
- [PATCH 2/2] arm64: phygate-tauri-l add overlays for RS232 and RS485
- From: Parthiban Nallathambi <parthiban@xxxxxxxxxxx>
- Re: [PATCH v2 3/5] dt-bindings: iio: dac: Add adi,ltc2664.yaml
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH RFC v3 5/9] dt-bindings: board: Document board-ids for Qualcomm devices
- From: Conor Dooley <conor@xxxxxxxxxx>
- Re: [PATCH v2 0/6] minor fixes and improvements
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v5 1/7] ASoC: dt-bindings: document wcd937x Audio Codec
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH v2 1/2] ASoC: dt-bindings: qcom,sm8250: Add QCM6490 snd QCS6490 sound card
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH v2 2/3] dt-bindings: input: document Novatek NVT touchscreen controller
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH 1/3] dt-bindings: arm: qcom,ids: Add SoC ID for SDM670
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH RFC v3 2/9] dt-bindings: board: Introduce board-id
- From: Conor Dooley <conor@xxxxxxxxxx>
- Re: [PATCH v2 1/2] dt-bindings: pinctrl: qcom,pmic-gpio: Document PMC8380
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH v2 3/5] dt-bindings: iio: dac: Add adi,ltc2664.yaml
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH RFC 1/2] dt-bindings: soc: qcom,smsm: Allow specifying mboxes instead of qcom,ipc
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH 5/7] dt-bindings: remoteproc: qcom,pas: Add hwlocks
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH] fix
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 1/7] dt-bindings: can: m_can: Add wakeup-source property
- From: Conor Dooley <conor@xxxxxxxxxx>
- Re: [PATCH 1/4] dt-bindings: clock: renesas: Document RZ/V2H(P) SoC CPG driver
- From: Conor Dooley <conor@xxxxxxxxxx>
- Re: [PATCH 2/4] dt-bindings: clock: Add R9A09G057 CPG Clock and Reset Definitions
- From: Conor Dooley <conor@xxxxxxxxxx>
- Re: [PATCH v2 2/8] dt-bindings: counter: Add new ti,am62-eqep compatible
- From: Conor Dooley <conor@xxxxxxxxxx>
- Re: [PATCH 1/2] dt-bindings: display: panel: Add WL-355608-A8 panel
- From: Conor Dooley <conor@xxxxxxxxxx>
- Re: [PATCH 2/3] dt-bindings: hwmon: g76x: Add support for g761
- From: Christian Marangi <ansuelsmth@xxxxxxxxx>
- Re: [PATCH 2/3] dt-bindings: hwmon: g76x: Add support for g761
- From: Guenter Roeck <linux@xxxxxxxxxxxx>
- Re: [PATCH net-next v4 00/12] Add support for OPEN Alliance 10BASE-T1x MACPHY Serial Interface
- From: Andrew Lunn <andrew@xxxxxxx>
- Re: [PATCH 2/3] dt-bindings: hwmon: g76x: Add support for g761
- From: Christian Marangi <ansuelsmth@xxxxxxxxx>
- Re: [PATCH 3/3] hwmon: g672: add support for g761
- From: Christian Marangi <ansuelsmth@xxxxxxxxx>
- Re: [PATCH 2/3] dt-bindings: hwmon: g76x: Add support for g761
- From: Guenter Roeck <linux@xxxxxxxxxxxx>
- Re: [PATCH 3/3] hwmon: g672: add support for g761
- From: Guenter Roeck <linux@xxxxxxxxxxxx>
- [PATCH] arm64: dts: qcom: msm8996: add reset for display subsystem
- From: Barnabás Czémán <trabarni@xxxxxxxxx>
- [PATCH v4 9/9] ARM: dts: samsung: exynos4212-tab3: Drop interrupt from WM1811 codec
- From: Artur Weber <aweber.kernel@xxxxxxxxx>
- [PATCH v4 8/9] ARM: dts: samsung: exynos4212-tab3: Add MCLK2 clock to WM1811 codec config
- From: Artur Weber <aweber.kernel@xxxxxxxxx>
- [PATCH v4 7/9] ARM: dts: samsung: exynos4212-tab3: Fix headset mic, add jack detection
- From: Artur Weber <aweber.kernel@xxxxxxxxx>
- [PATCH v4 6/9] ASoC: samsung: midas_wm1811: Use dev_err_probe where appropriate
- From: Artur Weber <aweber.kernel@xxxxxxxxx>
- [PATCH v4 5/9] ASoC: samsung: midas_wm1811: Add GPIO-based headset jack detection
- From: Artur Weber <aweber.kernel@xxxxxxxxx>
- [PATCH v4 4/9] ASoC: samsung: midas_wm1811: Add headset mic bias supply support
- From: Artur Weber <aweber.kernel@xxxxxxxxx>
- [PATCH v4 3/9] ASoC: samsung: midas_wm1811: Use SND_SOC_DAPM_REGULATOR_SUPPLY for bias regulators
- From: Artur Weber <aweber.kernel@xxxxxxxxx>
- [PATCH v4 2/9] ASoC: dt-bindings: samsung,midas-audio: Add GPIO-based headset jack detection
- From: Artur Weber <aweber.kernel@xxxxxxxxx>
- [PATCH v4 1/9] ASoC: dt-bindings: samsung,midas-audio: Add headset mic bias supply
- From: Artur Weber <aweber.kernel@xxxxxxxxx>
- [PATCH v4 0/9] ASoC: samsung: midas-audio: Add GPIO-based headset jack detection
- From: Artur Weber <aweber.kernel@xxxxxxxxx>
- Re: RISC-V: add Star64 board devicetree
- From: Markus Elfring <Markus.Elfring@xxxxxx>
- Re: RISC-V: add Star64 board devicetree
- From: Conor Dooley <conor@xxxxxxxxxx>
- Re: RISC-V: add Star64 board devicetree
- From: Markus Elfring <Markus.Elfring@xxxxxx>
- [PATCH 3/3] hwmon: g672: add support for g761
- From: Christian Marangi <ansuelsmth@xxxxxxxxx>
- [PATCH 2/3] dt-bindings: hwmon: g76x: Add support for g761
- From: Christian Marangi <ansuelsmth@xxxxxxxxx>
- [PATCH 1/3] dt-bindings: hwmon: g762: Convert to yaml schema
- From: Christian Marangi <ansuelsmth@xxxxxxxxx>
- Re: [PATCH] RISC-V: add Star64 board devicetree
- From: Conor Dooley <conor@xxxxxxxxxx>
- Re: [PATCH] RISC-V: add Star64 board devicetree
- From: Henry Bell <dmoo_dv@xxxxxxxxxxxxxx>
- Re: [PATCH] RISC-V: add Star64 board devicetree
- From: Markus Elfring <Markus.Elfring@xxxxxx>
- Re: [PATCH v5 5/5] clk: imx: clk-audiomix: Corrent parent clock for earc_phy and audpll
- From: Markus Elfring <Markus.Elfring@xxxxxx>
- Re: [PATCH v5 2/5] clk: imx: clk-audiomix: Add reset controller
- From: Markus Elfring <Markus.Elfring@xxxxxx>
- Re: [PATCH v3 3/4] mmc: sdhci-brcmstb: Add BCM2712 support
- From: Stefan Wahren <wahrenst@xxxxxxx>
- Re: [PATCH v3 3/4] mmc: sdhci-brcmstb: Add BCM2712 support
- From: Andrea della Porta <andrea.porta@xxxxxxxx>
- Re: [PATCH v3 2/2] pwm: Add Loongson PWM controller support
- From: Binbin Zhou <zhoubb.aaron@xxxxxxxxx>
- [PATCH v2 0/4] Add support for hwspinlock bust
- From: Chris Lew <quic_clew@xxxxxxxxxxx>
- [PATCH v2 4/4] remoteproc: qcom_q6v5_pas: Add hwspinlock bust on stop
- From: Chris Lew <quic_clew@xxxxxxxxxxx>
- [PATCH v2 1/4] hwspinlock: Introduce hwspin_lock_bust()
- From: Chris Lew <quic_clew@xxxxxxxxxxx>
- [PATCH v2 3/4] soc: qcom: smem: Add qcom_smem_bust_hwspin_lock_by_host()
- From: Chris Lew <quic_clew@xxxxxxxxxxx>
- [PATCH v2 2/4] hwspinlock: qcom: implement bust operation
- From: Chris Lew <quic_clew@xxxxxxxxxxx>
- [PATCH] of: of_test: add MODULE_DESCRIPTION()
- From: Jeff Johnson <quic_jjohnson@xxxxxxxxxxx>
- Re: [PATCH v2 2/2] pinctrl: qcom: spmi: Add PMC8380
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- [PATCH v2 2/2] pinctrl: qcom: spmi: Add PMC8380
- From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
- [PATCH v2 1/2] dt-bindings: pinctrl: qcom,pmic-gpio: Document PMC8380
- From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
- [PATCH v2 0/2] PMC8380 PMIC pinctrl
- From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
- RE: [PATCH net-next v4 00/12] Add support for OPEN Alliance 10BASE-T1x MACPHY Serial Interface
- From: Selvamani Rajagopal <Selvamani.Rajagopal@xxxxxxxxxx>
- Re: [PATCH v6 15/20] ARM: dts: aspeed: Add IBM P11 Blueridge 4U BMC system
- From: Ninad Palsule <ninad@xxxxxxxxxxxxx>
- RE: [PATCH net-next v4 00/12] Add support for OPEN Alliance 10BASE-T1x MACPHY Serial Interface
- From: Piergiorgio Beruto <Pier.Beruto@xxxxxxxxxx>
- Re: [PATCH net-next v4 00/12] Add support for OPEN Alliance 10BASE-T1x MACPHY Serial Interface
- From: Andrew Lunn <andrew@xxxxxxx>
- RE: [PATCH net-next v4 00/12] Add support for OPEN Alliance 10BASE-T1x MACPHY Serial Interface
- From: Piergiorgio Beruto <Pier.Beruto@xxxxxxxxxx>
- Re: [PATCH v2 2/8] dt-bindings: counter: Add new ti,am62-eqep compatible
- From: Judith Mendez <jm@xxxxxx>
- Re: [PATCH v2 2/8] dt-bindings: counter: Add new ti,am62-eqep compatible
- From: Judith Mendez <jm@xxxxxx>
- Re: [PATCH v2 2/8] dt-bindings: counter: Add new ti,am62-eqep compatible
- From: Judith Mendez <jm@xxxxxx>
- Re: [PATCH net-next v4 00/12] Add support for OPEN Alliance 10BASE-T1x MACPHY Serial Interface
- From: Andrew Lunn <andrew@xxxxxxx>
- Re: [PATCH 1/2] dt-bindings: display: panel: Add WL-355608-A8 panel
- From: "Ryan Walklin" <ryan@xxxxxxxxxxxxx>
- Re: [PATCH v2 1/8] counter/ti-eqep: Add new ti-am62-eqep compatible
- From: David Lechner <david@xxxxxxxxxxxxxx>
- Re: [PATCH v2 2/8] dt-bindings: counter: Add new ti,am62-eqep compatible
- From: David Lechner <david@xxxxxxxxxxxxxx>
- Re: [PATCH v2 7/8] counter: ti-eqep: Allow eQEP driver to be built for K3 devices
- From: David Lechner <david@xxxxxxxxxxxxxx>
- Re: [PATCH v2 2/8] dt-bindings: counter: Add new ti,am62-eqep compatible
- From: David Lechner <david@xxxxxxxxxxxxxx>
- RE: [PATCH net-next v4 05/12] net: ethernet: oa_tc6: implement error interrupts unmasking
- From: Piergiorgio Beruto <Pier.Beruto@xxxxxxxxxx>
- [PATCH v6 7/7] iommu/riscv: Paging domain support
- From: Tomasz Jeznach <tjeznach@xxxxxxxxxxxx>
- [PATCH v6 6/7] iommu/riscv: Command and fault queue support
- From: Tomasz Jeznach <tjeznach@xxxxxxxxxxxx>
- [PATCH v6 5/7] iommu/riscv: Device directory management.
- From: Tomasz Jeznach <tjeznach@xxxxxxxxxxxx>
- [PATCH v6 4/7] iommu/riscv: Enable IOMMU registration and device probe.
- From: Tomasz Jeznach <tjeznach@xxxxxxxxxxxx>
- [PATCH v6 2/7] iommu/riscv: Add RISC-V IOMMU platform device driver
- From: Tomasz Jeznach <tjeznach@xxxxxxxxxxxx>
- [PATCH v6 3/7] iommu/riscv: Add RISC-V IOMMU PCIe device driver
- From: Tomasz Jeznach <tjeznach@xxxxxxxxxxxx>
- [PATCH v6 1/7] dt-bindings: iommu: riscv: Add bindings for RISC-V IOMMU
- From: Tomasz Jeznach <tjeznach@xxxxxxxxxxxx>
- [PATCH v6 0/7] Linux RISC-V IOMMU Support
- From: Tomasz Jeznach <tjeznach@xxxxxxxxxxxx>
- Re: [PATCH 5/7] dt-bindings: remoteproc: qcom,pas: Add hwlocks
- From: Bjorn Andersson <quic_bjorande@xxxxxxxxxxx>
- Re: [PATCH v3 22/29] riscv sigcontext: adding cfi state field in sigcontext
- From: Deepak Gupta <debug@xxxxxxxxxxxx>
- Re: [PATCH 1/2] dt-bindings: display: panel: Add WL-355608-A8 panel
- From: Conor Dooley <conor@xxxxxxxxxx>
- Re: [PATCH] dt-bindings: arm: stm32: st,mlahb: Drop spurious "reg" property from example
- From: Conor Dooley <conor@xxxxxxxxxx>
- Re: [PATCH 1/2] dt-bindings: vcpu_stall_detector: Add a PPI interrupt to the virtual device
- From: Conor Dooley <conor@xxxxxxxxxx>
- Re: [PATCH 2/2] misc: Register a PPI for the vcpu stall detection virtual device
- From: Conor Dooley <conor@xxxxxxxxxx>
- Re: [PATCH v4 1/2] dt-bindings: regulator: st,stm32mp1-pwr-reg: add compatible for STM32MP13
- From: Conor Dooley <conor@xxxxxxxxxx>
- Re: [PATCH] arm64: dts: allwinner: convert NanoPi R1S H5 NVMEM content to layout syntax
- From: Andre Przywara <andre.przywara@xxxxxxx>
- Re: [PATCH 1/2 v2] RISC-V: add Star64 board devicetree
- From: Conor Dooley <conor@xxxxxxxxxx>
- Re: [PATCH 1/2] dt-bindings: arm: fsl: rename gw7905 to gw75xx
- From: Conor Dooley <conor@xxxxxxxxxx>
- Re: [PATCH v2 2/8] dt-bindings: counter: Add new ti,am62-eqep compatible
- From: Conor Dooley <conor@xxxxxxxxxx>
- Re: [PATCH net-next v4 05/12] net: ethernet: oa_tc6: implement error interrupts unmasking
- From: Andrew Lunn <andrew@xxxxxxx>
- Re: [PATCH v1 1/2] dt-bindings: usb: gpio-sbu-mux: Make 'enable-gpios' optional
- From: Conor Dooley <conor@xxxxxxxxxx>
- [PATCH 18/18] dmaengine: bcm2835: Revert the workaround for DMA addresses
- From: Dave Stevenson <dave.stevenson@xxxxxxxxxxxxxxx>
- [PATCH 17/18] ASoC: bcm2835-i2s: Use phys addresses for DAI DMA
- From: Dave Stevenson <dave.stevenson@xxxxxxxxxxxxxxx>
- [PATCH 16/18] drm/vc4: Use phys addresses for slave DMA config
- From: Dave Stevenson <dave.stevenson@xxxxxxxxxxxxxxx>
- [PATCH 14/18] mmc: bcm2835: Use phys addresses for slave DMA config
- From: Dave Stevenson <dave.stevenson@xxxxxxxxxxxxxxx>
- [PATCH 09/18] dmaengine: bcm2835: Add function to handle DMA mapping
- From: Dave Stevenson <dave.stevenson@xxxxxxxxxxxxxxx>
- [PATCH 15/18] spi: bcm2835: Use phys addresses for slave DMA config
- From: Dave Stevenson <dave.stevenson@xxxxxxxxxxxxxxx>
- [PATCH 13/18] arm: dt: Add dma-ranges to the bcm283x platforms
- From: Dave Stevenson <dave.stevenson@xxxxxxxxxxxxxxx>
- [PATCH 12/18] dmaengine: bcm2835: Read ranges if dma-ranges aren't mapped
- From: Dave Stevenson <dave.stevenson@xxxxxxxxxxxxxxx>
- [PATCH 10/18] dmaengine: bcm2835: Add backwards compatible handling until clients updated
- From: Dave Stevenson <dave.stevenson@xxxxxxxxxxxxxxx>
- [PATCH 11/18] dmaengine: bcm2835: Use dma_map_resource to map addresses
- From: Dave Stevenson <dave.stevenson@xxxxxxxxxxxxxxx>
- [PATCH 07/18] dmaengine: bcm2385: drop info parameters
- From: Dave Stevenson <dave.stevenson@xxxxxxxxxxxxxxx>
- [PATCH 08/18] dmaengine: bcm2835: pass dma_chan to generic functions
- From: Dave Stevenson <dave.stevenson@xxxxxxxxxxxxxxx>
- Re: [PATCH v5 1/6] dt-bindings: thermal: mediatek: Rename thermal zone definitions for MT8186 and MT8188
- From: Conor Dooley <conor@xxxxxxxxxx>
- [PATCH 06/18] dmaengine: bcm2835: make address increment platform independent
- From: Dave Stevenson <dave.stevenson@xxxxxxxxxxxxxxx>
- [PATCH 05/18] dmaengine: bcm2835: move CB final extra info generation into function
- From: Dave Stevenson <dave.stevenson@xxxxxxxxxxxxxxx>
- [PATCH 04/18] dmaengine: bcm2835: move CB info generation into separate function
- From: Dave Stevenson <dave.stevenson@xxxxxxxxxxxxxxx>
- [PATCH 03/18] ARM: dts: bcm283x: Update to use dma-channel-mask
- From: Dave Stevenson <dave.stevenson@xxxxxxxxxxxxxxx>
- [PATCH 02/18] dmaengine: bcm2835: Support common dma-channel-mask
- From: Dave Stevenson <dave.stevenson@xxxxxxxxxxxxxxx>
- [PATCH 01/18] dma-direct: take dma-ranges/offsets into account in resource mapping
- From: Dave Stevenson <dave.stevenson@xxxxxxxxxxxxxxx>
- [PATCH 00/18] BCM2835 DMA mapping cleanups and fixes
- From: Dave Stevenson <dave.stevenson@xxxxxxxxxxxxxxx>
- Re: [PATCH v5 1/6] dt-bindings: thermal: mediatek: Rename thermal zone definitions for MT8186 and MT8188
- From: Conor Dooley <conor@xxxxxxxxxx>
- Re: [PATCH v2 1/2] dt-bindings: arm: aspeed: add IBM SBP1 board
- From: Conor Dooley <conor@xxxxxxxxxx>
- Re: [PATCH net-next v4 05/12] net: ethernet: oa_tc6: implement error interrupts unmasking
- From: Ramón Nordin Rodriguez <ramon.nordin.rodriguez@xxxxxxxxxxx>
- Re: [PATCH RFC 1/2] dt-bindings: soc: qcom,smsm: Allow specifying mboxes instead of qcom,ipc
- From: Luca Weiss <luca@xxxxxxxxx>
- Re: [PATCH v5 0/6] Mediatek thermal sensor driver support for MT8186 and MT8188
- From: "Russell King (Oracle)" <linux@xxxxxxxxxxxxxxx>
- Re: [PATCH v5 0/6] Mediatek thermal sensor driver support for MT8186 and MT8188
- From: Nicolas Pitre <npitre@xxxxxxxxxxxx>
- Re: [PATCH v5 2/7] iommu/riscv: Add RISC-V IOMMU platform device driver
- From: Anup Patel <apatel@xxxxxxxxxxxxxxxx>
- Re: [PATCH RFC v3 0/9] dt-bindings: hwinfo: Introduce board-id
- From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
- Re: (subset) [PATCH v5 00/16] Add VOP2 support on rk3588
- From: Andy Yan <andy.yan@xxxxxxxxxxxxxx>
- Re: [PATCH 2/3] soc: qcom: socinfo: Add SDM670 SoC ID table entry
- From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
- Re: [PATCH 1/3] dt-bindings: arm: qcom,ids: Add SoC ID for SDM670
- From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
- Re: [PATCH v5 2/7] iommu/riscv: Add RISC-V IOMMU platform device driver
- From: Jason Gunthorpe <jgg@xxxxxxxx>
- Re: [PATCH v1 1/2] arm64: dts: qcom: sa8775p: Adding iommus property in pcie DT nodes
- From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
- [PATCH v2 1/3] Input: novatek-nvt-ts: replace generic i2c device id with specific IC variant
- From: Joel Selvaraj via B4 Relay <devnull+joelselvaraj.oss.gmail.com@xxxxxxxxxx>
- [PATCH v2 0/3] novatek-nvt-ts: add support for NT36672A touchscreen
- From: Joel Selvaraj via B4 Relay <devnull+joelselvaraj.oss.gmail.com@xxxxxxxxxx>
- [PATCH v2 2/3] dt-bindings: input: document Novatek NVT touchscreen controller
- From: Joel Selvaraj via B4 Relay <devnull+joelselvaraj.oss.gmail.com@xxxxxxxxxx>
- [PATCH v2 3/3] Input: novatek-nvt-ts: add support for NT36672A touchscreen
- From: Joel Selvaraj via B4 Relay <devnull+joelselvaraj.oss.gmail.com@xxxxxxxxxx>
- [PATCH v3 6/6] ARM64: mt8195: Use thermal aggregation for big and little cpu
- From: Alexandre Bailon <abailon@xxxxxxxxxxxx>
- [PATCH v3 5/6] thermal: of: Parse aggregation property to select the aggegration type
- From: Alexandre Bailon <abailon@xxxxxxxxxxxx>
- [PATCH v3 4/6] dt-bindings: thermal: Add a property to select the aggregation type
- From: Alexandre Bailon <abailon@xxxxxxxxxxxx>
- [PATCH v3 3/6] thermal: Add support of multi sensors to thermal_of
- From: Alexandre Bailon <abailon@xxxxxxxxxxxx>
- [PATCH v3 2/6] thermal: Add support of multi sensors to thermal_core
- From: Alexandre Bailon <abailon@xxxxxxxxxxxx>
- [PATCH v3 0/6] thermal: Add support of multiple sensors
- From: Alexandre Bailon <abailon@xxxxxxxxxxxx>
- [PATCH v3 1/6] dt-bindings: thermal: Restore the thermal-sensors property
- From: Alexandre Bailon <abailon@xxxxxxxxxxxx>
- Re: [PATCH v2 8/8] arm64: defconfig: Enable TI eQEP Driver
- From: Judith Mendez <jm@xxxxxx>
- Re: [PATCH v3 2/2] pwm: Add Loongson PWM controller support
- From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
- [PATCH v7 6/8] media: dt-bindings: Add bindings for Raspberry Pi PiSP Back End
- From: Jacopo Mondi <jacopo.mondi@xxxxxxxxxxxxxxxx>
- [PATCH] arm64: dts: allwinner: convert NanoPi R1S H5 NVMEM content to layout syntax
- From: Rafał Miłecki <zajec5@xxxxxxxxx>
- Re: [EXT] Re: [PATCH v2 5/5] firmware: imx: adds miscdev
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [EXT] Re: [PATCH v2 4/5] firmware: imx: add driver for NXP EdgeLock Enclave
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- RE: [EXT] Re: [PATCH v2 4/5] firmware: imx: add driver for NXP EdgeLock Enclave
- From: Pankaj Gupta <pankaj.gupta@xxxxxxx>
- RE: [EXT] Re: [PATCH v2 4/5] firmware: imx: add driver for NXP EdgeLock Enclave
- From: Pankaj Gupta <pankaj.gupta@xxxxxxx>
- RE: [EXT] Re: [PATCH v2 5/5] firmware: imx: adds miscdev
- From: Pankaj Gupta <pankaj.gupta@xxxxxxx>
- Re: [PATCH v9 0/3] Add support for Allwinner PWM on D1/T113s/R329 SoCs
- From: きくちゃんさん <kikuchan98@xxxxxxxxx>
- Re: [PATCH 1/2] dt-bindings: display: panel: Add WL-355608-A8 panel
- From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
- Re: [PATCH 2/2] drm: panel: nv3052c: Add WL-355608-A8 panel
- From: きくちゃんさん <kikuchan98@xxxxxxxxx>
- [PATCH v2 2/2] ARM: dts: aspeed: sbp1: IBM sbp1 BMC board
- From: Naresh Solanki <naresh.solanki@xxxxxxxxxxxxx>
- Re: [PATCH v4 07/10] iio: imu: adis_trigger: Allow level interrupts for FIFO readings
- From: Nuno Sá <noname.nuno@xxxxxxxxx>
- [PATCH v2 1/2] dt-bindings: arm: aspeed: add IBM SBP1 board
- From: Naresh Solanki <naresh.solanki@xxxxxxxxxxxxx>
- Re: [PATCH v4 06/10] drivers: iio: imu: adis16475: generic computation for sample rate
- From: Nuno Sá <noname.nuno@xxxxxxxxx>
- Re: [PATCH v4 05/10] iio: imu: adis16475: Create push single sample API
- From: Nuno Sá <noname.nuno@xxxxxxxxx>
- Re: [PATCH v4 04/10] iio: imu: adis_buffer: Add buffer setup API with buffer attributes
- From: Nuno Sá <noname.nuno@xxxxxxxxx>
- Re: [PATCH v4 02/10] drivers: iio: imu: Add support for ADIS16501
- From: Nuno Sá <noname.nuno@xxxxxxxxx>
- Re: [PATCH v4 10/10] drivers: iio: imu: Add support for adis1657x family
- From: Nuno Sá <noname.nuno@xxxxxxxxx>
- Re: [PATCH v4 08/10] iio: imu: adis16475: Re-define ADIS16475_DATA
- From: Nuno Sá <noname.nuno@xxxxxxxxx>
- Re: [PATCH v2 4/5] firmware: imx: add driver for NXP EdgeLock Enclave
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 2/2] drm: panel: nv3052c: Add WL-355608-A8 panel
- From: Ryan Walklin <ryan@xxxxxxxxxxxxx>
- [PATCH 1/2] dt-bindings: display: panel: Add WL-355608-A8 panel
- From: Ryan Walklin <ryan@xxxxxxxxxxxxx>
- [PATCH 0/2] Add WL-355608-A8 panel
- From: Ryan Walklin <ryan@xxxxxxxxxxxxx>
- Re: [PATCH v2 4/5] firmware: imx: add driver for NXP EdgeLock Enclave
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [RFC PATCH v4 2/5] dt-bindings: riscv: Add Svadu Entry
- From: Yong-Xuan Wang <yongxuan.wang@xxxxxxxxxx>
- Re: [PATCH v4 3/5] media: mali-c55: Add Mali-C55 ISP driver
- From: Dan Scally <dan.scally@xxxxxxxxxxxxxxxx>
- Re: [PATCH V3 2/3] arm64: zynqmp: Add resets property for UART nodes
- From: Michal Simek <michal.simek@xxxxxxx>
- [PATCH 9/9] arm64: dts: renesas: rzg2ul: Set Ethernet PVDD to 1.8V
- From: Paul Barker <paul.barker.ct@xxxxxxxxxxxxxx>
- [PATCH 8/9] arm64: dts: renesas: rzg2lc: Set Ethernet PVDD to 1.8V
- From: Paul Barker <paul.barker.ct@xxxxxxxxxxxxxx>
- [PATCH 7/9] arm64: dts: renesas: rzg2l: Set Ethernet PVDD to 1.8V
- From: Paul Barker <paul.barker.ct@xxxxxxxxxxxxxx>
- [PATCH 6/9] arm64: dts: renesas: rzg2ul: Enable Ethernet TXC output
- From: Paul Barker <paul.barker.ct@xxxxxxxxxxxxxx>
- [PATCH 5/9] arm64: dts: renesas: rzg2lc: Enable Ethernet TXC output
- From: Paul Barker <paul.barker.ct@xxxxxxxxxxxxxx>
- [PATCH 3/9] pinctrl: renesas: rzg2l: Support output enable on RZ/G2L
- From: Paul Barker <paul.barker.ct@xxxxxxxxxxxxxx>
- [PATCH 4/9] arm64: dts: renesas: rzg2l: Enable Ethernet TXC output
- From: Paul Barker <paul.barker.ct@xxxxxxxxxxxxxx>
- [PATCH 2/9] pinctrl: renesas: rzg2l: Refactor pin to OEN bit translation
- From: Paul Barker <paul.barker.ct@xxxxxxxxxxxxxx>
- [PATCH 1/9] pinctrl: renesas: rzg2l: Fix variable names in OEN functions
- From: Paul Barker <paul.barker.ct@xxxxxxxxxxxxxx>
- [PATCH 0/9] Configure GbEth for RGMII on RZ/G2L family
- From: Paul Barker <paul.barker.ct@xxxxxxxxxxxxxx>
- Re: [PATCH v3 22/29] riscv sigcontext: adding cfi state field in sigcontext
- From: Andy Chiu <andy.chiu@xxxxxxxxxx>
- Re: [PATCH v2] of: of_reserved_mem: clean-up reserved memory with no-map
- From: DaeRo Lee <skseofh@xxxxxxxxx>
- Re: [PATCH v2] arm64: dts: qcom: qdu/qru1000-idp: Fix the voltage setting
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- Re: [PATCH v2 0/2] Add support for QCM6490 and QCS6490
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- [PATCH v3 6/7] arm64: dts: ti: k3-j722s-main: Add WIZ1 and Serdes1 nodes
- From: Siddharth Vadapalli <s-vadapalli@xxxxxx>
- [PATCH v3 5/7] arm64: dts: ti: k3-j722s: Add lane mux for Serdes1
- From: Siddharth Vadapalli <s-vadapalli@xxxxxx>
- [PATCH v3 4/7] arm64: dts: ti: k3-serdes: Add Serdes1 lane-muxing macros for J722S
- From: Siddharth Vadapalli <s-vadapalli@xxxxxx>
- Re: [PATCH v2 4/5] firmware: imx: add driver for NXP EdgeLock Enclave
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH v3 7/7] arm64: dts: ti: k3-j722s: Add support for PCIe0
- From: Siddharth Vadapalli <s-vadapalli@xxxxxx>
- [PATCH v3 3/7] arm64: dts: ti: k3-j722s-evm: Update USB0 and USB1
- From: Siddharth Vadapalli <s-vadapalli@xxxxxx>
- [PATCH v3 2/7] arm64: dts: ti: k3-j722s-main: Redefine USB1 node description
- From: Siddharth Vadapalli <s-vadapalli@xxxxxx>
- [PATCH v3 1/7] arm64: dts: ti: k3-j722s-main: Add support for SERDES0
- From: Siddharth Vadapalli <s-vadapalli@xxxxxx>
- [PATCH v3 0/7] Add PCIe and USB device-tree support for J722S
- From: Siddharth Vadapalli <s-vadapalli@xxxxxx>
- Re: [PATCH v4 3/5] media: mali-c55: Add Mali-C55 ISP driver
- From: Dan Scally <dan.scally@xxxxxxxxxxxxxxxx>
- [PATCH v5 6/6] arm64: dts: mediatek: mt8188: add default thermal zones
- From: Julien Panis <jpanis@xxxxxxxxxxxx>
- [PATCH v5 5/6] arm64: dts: mediatek: mt8188: add lvts definitions
- From: Julien Panis <jpanis@xxxxxxxxxxxx>
- [PATCH v5 4/6] arm64: dts: mediatek: mt8186: add default thermal zones
- From: Julien Panis <jpanis@xxxxxxxxxxxx>
- [PATCH v5 3/6] arm64: dts: mediatek: mt8186: add lvts definitions
- From: Julien Panis <jpanis@xxxxxxxxxxxx>
- [PATCH v5 2/6] thermal/drivers/mediatek/lvts_thermal: Use renamed thermal zone definitions for MT8186 and MT8188
- From: Julien Panis <jpanis@xxxxxxxxxxxx>
- [PATCH v5 1/6] dt-bindings: thermal: mediatek: Rename thermal zone definitions for MT8186 and MT8188
- From: Julien Panis <jpanis@xxxxxxxxxxxx>
- [PATCH v5 0/6] Mediatek thermal sensor driver support for MT8186 and MT8188
- From: Julien Panis <jpanis@xxxxxxxxxxxx>
- [PATCH v4 10/10] drivers: iio: imu: Add support for adis1657x family
- From: Ramona Gradinariu <ramona.bolboaca13@xxxxxxxxx>
- Re: [PATCH v4 07/15] dt-bindings: display: mediatek: dpi: add compatible for MT8365
- From: CK Hu (胡俊光) <ck.hu@xxxxxxxxxxxx>
- [PATCH v4 09/10] dt-bindings: iio: imu: Add ADIS1657X family devices compatibles
- From: Ramona Gradinariu <ramona.bolboaca13@xxxxxxxxx>
- [PATCH v4 08/10] iio: imu: adis16475: Re-define ADIS16475_DATA
- From: Ramona Gradinariu <ramona.bolboaca13@xxxxxxxxx>
- [PATCH v4 07/10] iio: imu: adis_trigger: Allow level interrupts for FIFO readings
- From: Ramona Gradinariu <ramona.bolboaca13@xxxxxxxxx>
- [PATCH v4 06/10] drivers: iio: imu: adis16475: generic computation for sample rate
- From: Ramona Gradinariu <ramona.bolboaca13@xxxxxxxxx>
- [PATCH v4 05/10] iio: imu: adis16475: Create push single sample API
- From: Ramona Gradinariu <ramona.bolboaca13@xxxxxxxxx>
- [PATCH v4 04/10] iio: imu: adis_buffer: Add buffer setup API with buffer attributes
- From: Ramona Gradinariu <ramona.bolboaca13@xxxxxxxxx>
- [PATCH v4 03/10] iio: imu: adis16475: Re-define ADIS16475_DATA
- From: Ramona Gradinariu <ramona.bolboaca13@xxxxxxxxx>
- [PATCH v4 02/10] drivers: iio: imu: Add support for ADIS16501
- From: Ramona Gradinariu <ramona.bolboaca13@xxxxxxxxx>
- [PATCH v4 01/10] dt-bindings: iio: imu: Add ADIS16501 compatibles
- From: Ramona Gradinariu <ramona.bolboaca13@xxxxxxxxx>
- [PATCH v4 00/10] adis16501 and adis1657x support
- From: Ramona Gradinariu <ramona.bolboaca13@xxxxxxxxx>
- Re: [PATCH v4 06/15] dt-bindings: display: mediatek: dpi: add power-domains property
- From: CK Hu (胡俊光) <ck.hu@xxxxxxxxxxxx>
- [PATCH v4 6/6] firmware: imx: add i.MX95 MISC driver
- From: "Peng Fan (OSS)" <peng.fan@xxxxxxxxxxx>
- [PATCH v4 5/6] firmware: imx: support i.MX95 BBM module
- From: "Peng Fan (OSS)" <peng.fan@xxxxxxxxxxx>
- [PATCH v4 4/6] firmware: arm_scmi: add initial support for i.MX MISC protocol
- From: "Peng Fan (OSS)" <peng.fan@xxxxxxxxxxx>
- [PATCH v4 3/6] firmware: arm_scmi: add initial support for i.MX BBM protocol
- From: "Peng Fan (OSS)" <peng.fan@xxxxxxxxxxx>
- [PATCH v4 2/6] dt-bindings: firmware: add i.MX95 SCMI Extension protocol
- From: "Peng Fan (OSS)" <peng.fan@xxxxxxxxxxx>
- [PATCH v4 1/6] Documentation: firmware-guide: add NXP i.MX95 SCMI documentation
- From: "Peng Fan (OSS)" <peng.fan@xxxxxxxxxxx>
- [PATCH v4 0/6] firmware: support i.MX95 SCMI BBM/MISC Extenstion
- From: "Peng Fan (OSS)" <peng.fan@xxxxxxxxxxx>
- Re: [PATCH v4 3/5] media: mali-c55: Add Mali-C55 ISP driver
- From: Dan Scally <dan.scally@xxxxxxxxxxxxxxxx>
- Re: [PATCH v3 2/2] pwm: Add Loongson PWM controller support
- From: Binbin Zhou <zhoubb.aaron@xxxxxxxxx>
- [PATCH 4/4] clk: renesas: Add RZ/V2H(P) CPG helper driver
- From: Prabhakar <prabhakar.csengg@xxxxxxxxx>
- [PATCH 3/4] clk: renesas: Add RZ/V2H CPG core wrapper driver
- From: Prabhakar <prabhakar.csengg@xxxxxxxxx>
- [PATCH 2/4] dt-bindings: clock: Add R9A09G057 CPG Clock and Reset Definitions
- From: Prabhakar <prabhakar.csengg@xxxxxxxxx>
- [PATCH 1/4] dt-bindings: clock: renesas: Document RZ/V2H(P) SoC CPG driver
- From: Prabhakar <prabhakar.csengg@xxxxxxxxx>
- [PATCH 0/4] Add CPG support for RZ/V2H(P) SoC
- From: Prabhakar <prabhakar.csengg@xxxxxxxxx>
- Re: [PATCH v2 5/5] firmware: imx: adds miscdev
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH v2] arm64: dts: qcom: qdu/qru1000-idp: Fix the voltage setting
- From: Komal Bajaj <quic_kbajaj@xxxxxxxxxxx>
- [PATCH v2 02/10] dt-bindings: mfd: bd96801 PMIC core
- From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
- [PATCH v2 01/10] dt-bindings: ROHM BD96801 PMIC regulators
- From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
- [PATCH v2 00/10] Support ROHM BD96801 Scalable PMIC
- From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
- Re: [RFC PATCH 03/11] soc: tegra: config settings binding document
- From: "Thierry Reding" <thierry.reding@xxxxxxxxx>
- Re: [PATCH v4 05/15] dt-bindings: display: mediatek: dsi: add compatible for MT8365 SoC
- From: CK Hu (胡俊光) <ck.hu@xxxxxxxxxxxx>
- Re: [RFC PATCH 00/11] Introduce Tegra register config settings
- From: "Thierry Reding" <thierry.reding@xxxxxxxxx>
- Re: [PATCH net] dt-bindings: net: pse-pd: ti,tps23881: Fix missing "additionalProperties" constraints
- From: Kory Maincent <kory.maincent@xxxxxxxxxxx>
- Re: [PATCH net] dt-bindings: net: pse-pd: microchip,pd692x0: Fix missing "additionalProperties" constraints
- From: Kory Maincent <kory.maincent@xxxxxxxxxxx>
- Re: [RESEND PATCH 1/2] dt-bindings: dma: Add reg-names to nvidia,tegra210-adma
- From: "Thierry Reding" <thierry.reding@xxxxxxxxx>
- Re: [PATCH] arm64: dts: ti: k3-j722s-evm: Mark eMMC as non removable
- From: Bhavya Kapoor <b-kapoor@xxxxxx>
- Re: [PATCH v3 13/29] riscv mmu: write protect and shadow stack
- From: Deepak Gupta <debug@xxxxxxxxxxxx>
- Re: [PATCH v8 0/3] arm64: dts: imx93: add i.Core MX93 EDIMM 2.0 board
- From: Fabio Aiuto <fabio.aiuto@xxxxxxxxxxx>
- [PATCH v1 1/2] dt-bindings: usb: gpio-sbu-mux: Make 'enable-gpios' optional
- From: Francesco Dolcini <francesco@xxxxxxxxxx>
- [PATCH v1 0/2] usb: typec: mux: gpio-sbu: Make enable gpio optional
- From: Francesco Dolcini <francesco@xxxxxxxxxx>
- Re: [PATCH RFT 0/7] arm64: qcom: allow up to 4 lanes for the Type-C DisplayPort Altmode
- From: neil.armstrong@xxxxxxxxxx
- Re: [PATCH RFT 0/7] arm64: qcom: allow up to 4 lanes for the Type-C DisplayPort Altmode
- From: "Luca Weiss" <luca.weiss@xxxxxxxxxxxxx>
- Re: [v6 17/20] ARM: dts: aspeed: Add IBM Huygens BMC system
- From: Markus Elfring <Markus.Elfring@xxxxxx>
- RE: [PATCH v2 3/5] dt-bindings: iio: dac: Add adi,ltc2664.yaml
- From: "Paller, Kim Seer" <KimSeer.Paller@xxxxxxxxxx>
- Re: [PATCH v4 04/15] dt-bindings: display: mediatek: dither: add compatible for MT8365 SoC
- From: CK Hu (胡俊光) <ck.hu@xxxxxxxxxxxx>
- Re: [PATCH v2 8/8] arm64: defconfig: Enable TI eQEP Driver
- From: Nishanth Menon <nm@xxxxxx>
- Re: [PATCH v4 03/15] dt-bindings: display: mediatek: color: add compatible for MT8365 SoC
- From: CK Hu (胡俊光) <ck.hu@xxxxxxxxxxxx>
- Re: [PATCH 3/6] arm64: dts: ti: k3-pinctrl: Add WKUP_EN flag
- From: Nishanth Menon <nm@xxxxxx>
- Re: [PATCH 6/6] arm64: dts: ti: k3-am62p: Add partial-io wakeup sources
- From: Nishanth Menon <nm@xxxxxx>
- Re: [PATCH 0/6] firmware: ti_sci: Partial-IO support
- From: Nishanth Menon <nm@xxxxxx>
- Re: [PATCH 7/7] arm64: dts: ti: k3-am62p-mcu: Mark mcu_mcan0/1 as wakeup-source
- From: Nishanth Menon <nm@xxxxxx>
- Re: [PATCH 2/6] firmware: ti_sci: Partial-IO support
- From: Nishanth Menon <nm@xxxxxx>
- Re: [PATCH v2 3/3] arm64: dts: ti: k3-j722s-evm: Update USB0 and USB1
- From: Siddharth Vadapalli <s-vadapalli@xxxxxx>
- Re: [PATCH v4 02/15] dt-bindings: display: mediatek: ccorr: add compatible for MT8365 SoC
- From: CK Hu (胡俊光) <ck.hu@xxxxxxxxxxxx>
- Re: [PATCH v2 0/2] Add support for QCM6490 and QCS6490
- From: Mohammad Rafi Shaik <quic_mohs@xxxxxxxxxxx>
- [PATCH v5 7/7] ASoC: codecs: wcd937x: add audio routing and Kconfig
- From: Mohammad Rafi Shaik <quic_mohs@xxxxxxxxxxx>
- [PATCH v5 6/7] ASoC: codecs: wcd937x: add capture dapm widgets
- From: Mohammad Rafi Shaik <quic_mohs@xxxxxxxxxxx>
- [PATCH v5 5/7] ASoC: codecs: wcd937x: add playback dapm widgets
- From: Mohammad Rafi Shaik <quic_mohs@xxxxxxxxxxx>
- [PATCH v5 4/7] ASoC: codecs: wcd937x: add basic controls
- From: Mohammad Rafi Shaik <quic_mohs@xxxxxxxxxxx>
- [PATCH v5 3/7] ASoC: codecs: wcd937x: add wcd937x codec driver
- From: Mohammad Rafi Shaik <quic_mohs@xxxxxxxxxxx>
- [PATCH v5 2/7] ASoC: codecs: wcd937x-sdw: add SoundWire driver
- From: Mohammad Rafi Shaik <quic_mohs@xxxxxxxxxxx>
- [PATCH v5 1/7] ASoC: dt-bindings: document wcd937x Audio Codec
- From: Mohammad Rafi Shaik <quic_mohs@xxxxxxxxxxx>
- [PATCH v5 0/7] ASoC: codecs: wcd937x: add wcd937x audio codec support
- From: Mohammad Rafi Shaik <quic_mohs@xxxxxxxxxxx>
- [PATCH v2 2/2] ASoC: qcom: sc8280xp: Add support for QCM6490 and QCS6490
- From: Mohammad Rafi Shaik <quic_mohs@xxxxxxxxxxx>
- [PATCH v2 1/2] ASoC: dt-bindings: qcom,sm8250: Add QCM6490 snd QCS6490 sound card
- From: Mohammad Rafi Shaik <quic_mohs@xxxxxxxxxxx>
- [PATCH v2 0/2] Add support for QCM6490 and QCS6490
- From: Mohammad Rafi Shaik <quic_mohs@xxxxxxxxxxx>
- Re: [PATCH v2 5/5] iio: dac: ltc2664: Add driver for LTC2664 and LTC2672
- From: kernel test robot <lkp@xxxxxxxxx>
- Re:[PATCH v2 1/3] vop2: Add clock resets support
- From: "Andy Yan" <andyshrk@xxxxxxx>
- Re: [PATCH] arm64: dts: qcom: qcs6490-rb3gen2: Specify zap region for gpu
- From: Bjorn Andersson <andersson@xxxxxxxxxx>
- Re: [PATCH v4 01/15] dt-bindings: display: mediatek: aal: add compatible for MT8365 SoC
- From: CK Hu (胡俊光) <ck.hu@xxxxxxxxxxxx>
- Re: [PATCH v5 2/5] clk: imx: clk-audiomix: Add reset controller
- From: Shengjiu Wang <shengjiu.wang@xxxxxxxxx>
- [PATCH 3/3] arm64: dts: qcom: sdm670: add smem region
- From: Richard Acayan <mailingradian@xxxxxxxxx>
- [PATCH 2/3] soc: qcom: socinfo: Add SDM670 SoC ID table entry
- From: Richard Acayan <mailingradian@xxxxxxxxx>
- [PATCH 1/3] dt-bindings: arm: qcom,ids: Add SoC ID for SDM670
- From: Richard Acayan <mailingradian@xxxxxxxxx>
- [PATCH 0/3] SDM670 shared memory and socinfo
- From: Richard Acayan <mailingradian@xxxxxxxxx>
- RE: [PATCH v5 5/5] clk: imx: clk-audiomix: Corrent parent clock for earc_phy and audpll
- From: Peng Fan <peng.fan@xxxxxxx>
- RE: [PATCH v5 4/5] clk: imx: clk-audiomix: Add CLK_SET_RATE_PARENT flags for clocks
- From: Peng Fan <peng.fan@xxxxxxx>
- Re: [PATCH 1/6] dt-bindings: ti, sci: Add property for partial-io-wakeup-sources
- From: Nishanth Menon <nm@xxxxxx>
- [PATCH v22 18/38] ALSA: usb-audio: qcom: Introduce QC USB SND offloading support
- From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
- [PATCH v22 00/38] Introduce QC USB SND audio offloading support
- From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
- [PATCH v22 38/38] ASoC: doc: Add documentation for SOC USB
- From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
- [PATCH v22 32/38] ASoC: qcom: qdsp6: Add headphone jack for offload connection status
- From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
- [PATCH v22 03/38] xhci: sideband: add initial api to register a sideband entity
- From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
- [PATCH v22 28/38] ASoC: qcom: qdsp6: Add SOC USB offload select get/put callbacks
- From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
- [PATCH v22 37/38] ASoC: usb: Rediscover USB SND devices on USB port add
- From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
- [PATCH v22 34/38] ALSA: usb-audio: Add USB offloading capable kcontrol
- From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
- [PATCH v22 21/38] ASoC: qcom: qdsp6: Ensure PCM format is supported by USB audio device
- From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
- [PATCH v22 33/38] ASoC: usb: Fetch ASoC sound card information
- From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
- [PATCH v22 25/38] ALSA: usb-audio: qcom: Populate PCM and USB chip information
- From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
- [PATCH v22 09/38] ASoC: qcom: qdsp6: Introduce USB AFE port to q6dsp
- From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
- [PATCH v22 13/38] ALSA: usb-audio: Export USB SND APIs for modules
- From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
- [PATCH v22 36/38] ALSA: usb-audio: qcom: Use card and PCM index from QMI request
- From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
- [PATCH v22 30/38] ASoC: qcom: qdsp6: Add PCM ops to track current state
- From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
- [PATCH v22 23/38] ALSA: usb-audio: Do not allow USB offload path if PCM device is in use
- From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
- [PATCH v22 11/38] ASoC: qcom: qdsp6: Add USB backend ASoC driver for Q6
- From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
- [PATCH v22 15/38] usb: dwc3: Specify maximum number of XHCI interrupters
- From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
- [PATCH v22 31/38] ASoC: usb: Create SOC USB SND jack kcontrol
- From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
- [PATCH v22 07/38] ASoC: Add SOC USB APIs for adding an USB backend
- From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
- [PATCH v22 16/38] usb: host: xhci-plat: Set XHCI max interrupters if property is present
- From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
- [PATCH v22 29/38] ASoC: Introduce SND kcontrols to track USB offloading state
- From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
- [PATCH v22 20/38] ASoC: usb: Add PCM format check API for USB backend
- From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
- [PATCH v22 17/38] ALSA: usb-audio: qcom: Add USB QMI definitions
- From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
- [PATCH v22 14/38] ALSA: usb-audio: Save UAC sample size information
- From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
- [PATCH v22 27/38] ASoC: Introduce SND kcontrols to select sound card and PCM device
- From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
- [PATCH v22 05/38] usb: host: xhci-mem: Cleanup pending secondary event ring events
- From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
- [PATCH v22 35/38] ALSA: usb-audio: Allow for rediscovery of connected USB SND devices
- From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
- [PATCH v22 06/38] usb: host: xhci-mem: Allow for interrupter clients to choose specific index
- From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
- [PATCH v22 26/38] ASoC: qcom: qdsp6: Add support to track available USB PCM devices
- From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
- [PATCH v22 08/38] ASoC: dt-bindings: qcom,q6dsp-lpass-ports: Add USB_RX port
- From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
- [PATCH v22 22/38] ALSA: usb-audio: Prevent starting of audio stream if in use
- From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
- [PATCH v22 04/38] usb: xhci: Allow for secondary interrupter to set IMOD
- From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
- [PATCH v22 10/38] ASoC: qdsp6: q6afe: Increase APR timeout
- From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
- [PATCH v22 01/38] xhci: add helper to stop endpoint and wait for completion
- From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
- [PATCH v22 02/38] usb: host: xhci: Repurpose event handler for skipping interrupter events
- From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
- [PATCH v22 19/38] ALSA: usb-audio: Check for support for requested audio format
- From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
- [PATCH v22 12/38] ALSA: usb-audio: Introduce USB SND platform op callbacks
- From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
- [PATCH v22 24/38] ASoC: dt-bindings: Update example for enabling USB offload on SM8250
- From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
- Re: [PATCH v8 00/23] Add i2c-mux and eeprom devices for Meta Yosemite 4
- From: Andrew Jeffery <andrew@xxxxxxxxxxxxxxxxxxxx>
- Re: [PATCH 2/5] dt-bindings: Add bindings for the Analog Devices ADP5585
- From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
- [PATCH v2 4/8] arm64: dts: ti: k3-am62a-main: Add eQEP nodes
- From: Judith Mendez <jm@xxxxxx>
- [PATCH v2 3/8] arm64: dts: ti: k3-am62-main: Add eQEP nodes
- From: Judith Mendez <jm@xxxxxx>
- [PATCH v2 2/8] dt-bindings: counter: Add new ti,am62-eqep compatible
- From: Judith Mendez <jm@xxxxxx>
- [PATCH v2 7/8] counter: ti-eqep: Allow eQEP driver to be built for K3 devices
- From: Judith Mendez <jm@xxxxxx>
- [PATCH v2 6/8] arm64: dts: ti: k3-am64-main: Add eQEP nodes
- From: Judith Mendez <jm@xxxxxx>
- [PATCH v2 1/8] counter/ti-eqep: Add new ti-am62-eqep compatible
- From: Judith Mendez <jm@xxxxxx>
- [PATCH v2 8/8] arm64: defconfig: Enable TI eQEP Driver
- From: Judith Mendez <jm@xxxxxx>
- [PATCH v2 5/8] arm64: dts: ti: k3-am62p-main: Add eQEP nodes
- From: Judith Mendez <jm@xxxxxx>
- [PATCH v2 0/8] Enable eQEP DT support for Sitara K3 platforms
- From: Judith Mendez <jm@xxxxxx>
- Re: [PATCH 1/2] dt-bindings: arm: fsl: rename gw7905 to gw75xx
- From: Tim Harvey <tharvey@xxxxxxxxxxxxx>
- Re: [PATCH] ARM: dts: broadcom: convert NVMEM content to layout syntax
- From: Florian Fainelli <florian.fainelli@xxxxxxxxxxxx>
- [PATCH 2/2 v2] RISC-V: add Star64 board devicetree
- From: Henry Bell <dmoo_dv@xxxxxxxxxxxxxx>
- [PATCH 1/2 v2] RISC-V: add Star64 board devicetree
- From: Henry Bell <dmoo_dv@xxxxxxxxxxxxxx>
- Re: [PATCH v6 17/20] ARM: dts: aspeed: Add IBM Huygens BMC system
- From: Ninad Palsule <ninad@xxxxxxxxxxxxx>
- Re: [PATCH v6 18/20] fsi: occ: Get device number from FSI minor number API
- From: Ninad Palsule <ninad@xxxxxxxxxxxxx>
- Re: [PATCH v6 19/20] fsi: occ: Find next available child rather than node name match
- From: Ninad Palsule <ninad@xxxxxxxxxxxxx>
- Re: [PATCH v6 20/20] fsi: scom: Update compatible string to match documentation
- From: Ninad Palsule <ninad@xxxxxxxxxxxxx>
- Re: [PATCH] dt-bindings: usb: realtek,rts5411: Add missing "additionalProperties" on child nodes
- From: Stephen Boyd <swboyd@xxxxxxxxxxxx>
- Re: [PATCH v4 3/5] media: mali-c55: Add Mali-C55 ISP driver
- From: Sakari Ailus <sakari.ailus@xxxxxx>
- Re: [PATCH v4 3/5] media: mali-c55: Add Mali-C55 ISP driver
- From: Sakari Ailus <sakari.ailus@xxxxxx>
- Re: [PATCH 1/2] dt-bindings: pinctrl: qcom,pmic-gpio: Document PMC8380
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- [PATCH 3/3] arm64: dts: renesas: s4sk: add aliases for I2C busses
- From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
- [PATCH 2/3] arm64: dts: renesas: spider-cpu: add aliases for I2C busses
- From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
- [PATCH 0/3] arm64: dts: renesas: add aliases for I2C
- From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
- [PATCH 1/3] arm64: dts: renesas: white-hawk-cpu: add aliases for I2C busses
- From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v5 2/5] clk: imx: clk-audiomix: Add reset controller
- From: Frank Li <Frank.li@xxxxxxx>
- Re: [PATCH 1/3] dt-bindings: media: rockchip,vpu: Document RK3128 compatible
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- Re: [v6 17/20] ARM: dts: aspeed: Add IBM Huygens BMC system
- From: Al Viro <viro@xxxxxxxxxxxxxxxxxx>
- Re: [v6 17/20] ARM: dts: aspeed: Add IBM Huygens BMC system
- From: Markus Elfring <Markus.Elfring@xxxxxx>
- Re: [PATCH] RISC-V: add Star64 board devicetree
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- Re: [PATCH 1/2] ti: omap: MAINTAINERS: move Benoît Cousson to CREDITS
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- Re: [PATCH v6 17/20] ARM: dts: aspeed: Add IBM Huygens BMC system
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- Re: [PATCH 3/5] mfd: adp5585: Add Analog Devices ADP5585 core support
- From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
- Re: [v6 17/20] ARM: dts: aspeed: Add IBM Huygens BMC system
- From: Markus Elfring <Markus.Elfring@xxxxxx>
- [PATCH] dt-bindings: usb: realtek,rts5411: Add missing "additionalProperties" on child nodes
- From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
- Re: [v6 17/20] ARM: dts: aspeed: Add IBM Huygens BMC system
- From: Conor Dooley <conor@xxxxxxxxxx>
- Re: [v6 17/20] ARM: dts: aspeed: Add IBM Huygens BMC system
- From: Markus Elfring <Markus.Elfring@xxxxxx>
- Re: [PATCH v6 17/20] ARM: dts: aspeed: Add IBM Huygens BMC system
- From: Eddie James <eajames@xxxxxxxxxxxxx>
- Re: [PATCH 0/5] serial: 8250: omap: Add am62 wakeup support
- From: Francesco Dolcini <francesco@xxxxxxxxxx>
- [PATCH] RISC-V: add Star64 board devicetree
- From: H Bell <dmoo_dv@xxxxxxxxxxxxxx>
- Re: [PATCH v6 17/20] ARM: dts: aspeed: Add IBM Huygens BMC system
- From: Eddie James <eajames@xxxxxxxxxxxxx>
- Re: [PATCH v4 1/5] clk: sunxi-ng: common: Support minimum and maximum rate
- From: Måns Rullgård <mans@xxxxxxxxx>
- [PATCH 3/3] ARM: dts: rockchip: Add vpu nodes for RK3128
- From: Alex Bee <knaerzche@xxxxxxxxx>
- [PATCH 2/3] soc: rockchip: grf: Set RK3128's vpu main clock
- From: Alex Bee <knaerzche@xxxxxxxxx>
- [PATCH 1/3] dt-bindings: media: rockchip,vpu: Document RK3128 compatible
- From: Alex Bee <knaerzche@xxxxxxxxx>
- [PATCH 0/3] Add VPU support for RK3128
- From: Alex Bee <knaerzche@xxxxxxxxx>
- Re: [PATCH v6 17/20] ARM: dts: aspeed: Add IBM Huygens BMC system
- From: Markus Elfring <Markus.Elfring@xxxxxx>
- Re: [EXT] Re: [PATCH v2 4/5] firmware: imx: add driver for NXP EdgeLock Enclave
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH v4 0/2] ARM: st: add new compatible for PWR regulators on STM32MP13
- From: Patrick Delaunay <patrick.delaunay@xxxxxxxxxxx>
- [PATCH v4 1/2] dt-bindings: regulator: st,stm32mp1-pwr-reg: add compatible for STM32MP13
- From: Patrick Delaunay <patrick.delaunay@xxxxxxxxxxx>
- Re: [PATCH v4 3/5] media: mali-c55: Add Mali-C55 ISP driver
- From: Sakari Ailus <sakari.ailus@xxxxxx>
- Re: [PATCH 1/2] ti: omap: MAINTAINERS: move Benoît Cousson to CREDITS
- From: Kevin Hilman <khilman@xxxxxxxxxx>
- [PATCH net] dt-bindings: net: pse-pd: ti,tps23881: Fix missing "additionalProperties" constraints
- From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
- [PATCH net] dt-bindings: net: pse-pd: microchip,pd692x0: Fix missing "additionalProperties" constraints
- From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
- Re: [PATCH v3 9/9] drivers: iio: imu: Add support for adis1657x family
- From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
- Re: [PATCH] dt-bindings: iio: adc: add a7779 doc
- From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
- Re: [PATCH v2 5/5] iio: dac: ltc2664: Add driver for LTC2664 and LTC2672
- From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
- Re: [PATCH v2 1/5] iio: ABI: Generalize ABI documentation for DAC
- From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
- Re: [PATCH v3 0/2] Add USB 3.0 support for J784S4
- From: Andrew Halaney <ahalaney@xxxxxxxxxx>
- Re: [PATCH 4/5] iio: adis16480: add support for adis16545/7 families
- From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
- Re: [PATCH v3 2/2] pwm: Add Loongson PWM controller support
- From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
- Re: DT schema bindings conversion mentorships (was Re: [PATCH v5] ASoC: dt-bindings: omap-mcpdm: Convert to DT schema)
- From: Javier Carrasco <javier.carrasco.cruz@xxxxxxxxx>
- Re: DT schema bindings conversion mentorships (was Re: [PATCH v5] ASoC: dt-bindings: omap-mcpdm: Convert to DT schema)
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH v5 2/7] iommu/riscv: Add RISC-V IOMMU platform device driver
- From: Tomasz Jeznach <tjeznach@xxxxxxxxxxxx>
- [PATCH 2/2] misc: Register a PPI for the vcpu stall detection virtual device
- From: Sebastian Ene <sebastianene@xxxxxxxxxx>
- [PATCH 1/2] dt-bindings: vcpu_stall_detector: Add a PPI interrupt to the virtual device
- From: Sebastian Ene <sebastianene@xxxxxxxxxx>
- [PATCH 0/2] misc: vcpu_stall_detector: Add a PPI interrupt
- From: Sebastian Ene <sebastianene@xxxxxxxxxx>
- Re: [PATCH v6 05/20] dt-bindings: fsi: Document the IBM SBEFIFO engine
- From: Markus Elfring <Markus.Elfring@xxxxxx>
- [RESEND v3 2/2] dt-bindings: riscv: cpus: add ref to interrupt-controller
- From: Kanak Shilledar <kanakshilledar@xxxxxxxxx>
- [RESEND v3 1/2] dt-bindings: interrupt-controller: riscv,cpu-intc: convert to dtschema
- From: Kanak Shilledar <kanakshilledar@xxxxxxxxx>
- [RESEND v3 0/2] dt-bindings: interrupt-controller: riscv,cpu-intc
- From: Kanak Shilledar <kanakshilledar@xxxxxxxxx>
- [PATCH] dt-bindings: arm: stm32: st,mlahb: Drop spurious "reg" property from example
- From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
- Re: [PATCH v6 04/20] dt-bindings: fsi: p9-occ: Convert to json-schema
- From: Markus Elfring <Markus.Elfring@xxxxxx>
- Re: [PATCH RFC v2 1/8] spi: dt-bindings: spi-peripheral-props: add spi-offloads property
- From: Nuno Sá <noname.nuno@xxxxxxxxx>
- Re: [PATCH v5 7/7] iommu/riscv: Paging domain support
- From: Jason Gunthorpe <jgg@xxxxxxxx>
- Re: [PATCH v3 1/7] dt-bindings: pci: xilinx-nwl: Add phys
- From: Sean Anderson <sean.anderson@xxxxxxxxx>
- Re: [PATCH RFC v2 1/8] spi: dt-bindings: spi-peripheral-props: add spi-offloads property
- From: David Lechner <dlechner@xxxxxxxxxxxx>
- Re: [PATCH RFC v2 1/8] spi: dt-bindings: spi-peripheral-props: add spi-offloads property
- From: David Lechner <dlechner@xxxxxxxxxxxx>
- Re: [PATCH V5 1/6] Add PCIe pipe clock definitions for IPQ9574 SoC.
- From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
- Re: [PATCH v3 13/29] riscv mmu: write protect and shadow stack
- From: Alexandre Ghiti <alexghiti@xxxxxxxxxxxx>
- Re: [PATCH RFC v2 1/8] spi: dt-bindings: spi-peripheral-props: add spi-offloads property
- From: Nuno Sá <noname.nuno@xxxxxxxxx>
- Re: [PATCH v2 3/3] dt-bindings: display: vop2: Add VP clock resets
- From: Conor Dooley <conor@xxxxxxxxxx>
- Re: [PATCH v2 1/2] dt-bindings: input: touchscreen: add Hynitron CST816X
- From: Conor Dooley <conor@xxxxxxxxxx>
- Re: [PATCH 1/2] dt-bindings: arm: fsl: rename gw7905 to gw75xx
- From: Conor Dooley <conor@xxxxxxxxxx>
- Re: [PATCH v7 17/23] dt-bindings: crypto: meson: remove clk and second interrupt line for GXL
- From: Conor Dooley <conor@xxxxxxxxxx>
- Re: [PATCH RFC v2 1/8] spi: dt-bindings: spi-peripheral-props: add spi-offloads property
- From: Conor Dooley <conor@xxxxxxxxxx>
- Re: [PATCH RFC v2 1/8] spi: dt-bindings: spi-peripheral-props: add spi-offloads property
- From: David Lechner <dlechner@xxxxxxxxxxxx>
- Re: [PATCH v4 3/5] media: mali-c55: Add Mali-C55 ISP driver
- From: Dan Scally <dan.scally@xxxxxxxxxxxxxxxx>
- Re: [PATCH v4 3/5] media: mali-c55: Add Mali-C55 ISP driver
- From: Dan Scally <dan.scally@xxxxxxxxxxxxxxxx>
- RE: [EXT] Re: [PATCH v2 4/5] firmware: imx: add driver for NXP EdgeLock Enclave
- From: Pankaj Gupta <pankaj.gupta@xxxxxxx>
- Re: [PATCH v2 2/3] thermal: Add support of multi sensors to thermal_core
- From: Alexandre Bailon <abailon@xxxxxxxxxxxx>
- Re: [PATCH v2 4/5] firmware: imx: add driver for NXP EdgeLock Enclave
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH] arm64: dts: qcom: qcs6490-rb3gen2: Enable PMK8350 RTC module
- From: Umang Chheda <quic_uchheda@xxxxxxxxxxx>
- Re: [PATCH v6 10/10] media: i2c: Add driver for mlx7502x ToF sensor
- From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
- Re: [PATCH v2 0/3] thermal: Add support of multiple sensors
- From: Alexandre Bailon <abailon@xxxxxxxxxxxx>
- [PATCH v4 15/15] arm64: dts: mediatek: add display support for mt8365-evk
- From: Alexandre Mergnat <amergnat@xxxxxxxxxxxx>
- [PATCH v4 14/15] arm64: dts: mediatek: add display blocks support for the MT8365 SoC
- From: Alexandre Mergnat <amergnat@xxxxxxxxxxxx>
- [PATCH v4 13/15] arm64: defconfig: enable display connector support
- From: Alexandre Mergnat <amergnat@xxxxxxxxxxxx>
- [PATCH v4 12/15] drm/mediatek: add MT8365 SoC support
- From: amergnat@xxxxxxxxxxxx
- [PATCH v4 11/15] drm/mediatek: dsi: Improves the DSI lane setup robustness
- From: Alexandre Mergnat <amergnat@xxxxxxxxxxxx>
- [PATCH v4 10/15] dt-bindings: display: mediatek: rdma: add compatible for MT8365 SoC
- From: Alexandre Mergnat <amergnat@xxxxxxxxxxxx>
- [PATCH v4 09/15] dt-bindings: display: mediatek: ovl: add compatible for MT8365 SoC
- From: Alexandre Mergnat <amergnat@xxxxxxxxxxxx>
- [PATCH v4 08/15] dt-bindings: display: mediatek: gamma: add compatible for MT8365 SoC
- From: Alexandre Mergnat <amergnat@xxxxxxxxxxxx>
- [PATCH v4 07/15] dt-bindings: display: mediatek: dpi: add compatible for MT8365
- From: Alexandre Mergnat <amergnat@xxxxxxxxxxxx>
- [PATCH v4 06/15] dt-bindings: display: mediatek: dpi: add power-domains property
- From: amergnat@xxxxxxxxxxxx
- [PATCH v4 05/15] dt-bindings: display: mediatek: dsi: add compatible for MT8365 SoC
- From: Alexandre Mergnat <amergnat@xxxxxxxxxxxx>
- [PATCH v4 04/15] dt-bindings: display: mediatek: dither: add compatible for MT8365 SoC
- From: Alexandre Mergnat <amergnat@xxxxxxxxxxxx>
- [PATCH v4 03/15] dt-bindings: display: mediatek: color: add compatible for MT8365 SoC
- From: Alexandre Mergnat <amergnat@xxxxxxxxxxxx>
- [PATCH v4 02/15] dt-bindings: display: mediatek: ccorr: add compatible for MT8365 SoC
- From: Alexandre Mergnat <amergnat@xxxxxxxxxxxx>
- [PATCH v4 00/15] Add display support for the MT8365-EVK board
- From: Alexandre Mergnat <amergnat@xxxxxxxxxxxx>
- [PATCH v4 01/15] dt-bindings: display: mediatek: aal: add compatible for MT8365 SoC
- From: Alexandre Mergnat <amergnat@xxxxxxxxxxxx>
- Re: [PATCH v6 17/20] ARM: dts: aspeed: Add IBM Huygens BMC system
- From: kernel test robot <lkp@xxxxxxxxx>
- Re: [PATCH RFC v2 1/8] spi: dt-bindings: spi-peripheral-props: add spi-offloads property
- From: Mark Brown <broonie@xxxxxxxxxx>
- Re: [PATCH v2 0/6] minor fixes and improvements
- From: Nuno Sá <noname.nuno@xxxxxxxxx>
- Re: [PATCH v2 3/6] iio: dac: ad3552r: add model data structure
- From: Nuno Sá <noname.nuno@xxxxxxxxx>
- Re: [PATCH v2 4/5] dt-bindings: iio: dac: Add adi,ltc2672.yaml
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: DT schema bindings conversion mentorships (was Re: [PATCH v5] ASoC: dt-bindings: omap-mcpdm: Convert to DT schema)
- From: Daniel Baluta <daniel.baluta@xxxxxxx>
- RE: [EXT] Re: [PATCH v2 2/5] dt-bindings: arm: fsl: add imx-se-fw binding doc
- From: Pankaj Gupta <pankaj.gupta@xxxxxxx>
- Re: DT schema bindings conversion mentorships (was Re: [PATCH v5] ASoC: dt-bindings: omap-mcpdm: Convert to DT schema)
- From: Daniel Baluta <daniel.baluta@xxxxxxx>
- Re: [PATCH v2 2/5] dt-bindings: arm: fsl: add imx-se-fw binding doc
- From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
- Re: [PATCH RFC v2 1/8] spi: dt-bindings: spi-peripheral-props: add spi-offloads property
- From: Nuno Sá <noname.nuno@xxxxxxxxx>
- Re: [PATCH v2 5/7] drm/msm/adreno: Add A702 support
- From: Connor Abbott <cwabbott0@xxxxxxxxx>
- [PATCH v2 3/3] arm64: dts: qcom: sdx75-idp: add SDHCI for SD Card
- From: Naina Mehta <quic_nainmeht@xxxxxxxxxxx>
- [PATCH v2 2/3] arm64: dts: qcom: sdx75: Add SDHCI node
- From: Naina Mehta <quic_nainmeht@xxxxxxxxxxx>
- [PATCH v2 0/3] Add SDHCI support for SDX75 SoC
- From: Naina Mehta <quic_nainmeht@xxxxxxxxxxx>
- [PATCH v2 1/3] dt-bindings: mmc: sdhci-msm: Document the SDX75 compatible
- From: Naina Mehta <quic_nainmeht@xxxxxxxxxxx>
- Re: [PATCH 01/13] dt-bindings: net: rockchip-dwmac: Fix rockchip,rk3308-gmac compatible
- From: Paolo Abeni <pabeni@xxxxxxxxxx>
- Re: [PATCH v4 3/5] media: mali-c55: Add Mali-C55 ISP driver
- From: Dan Scally <dan.scally@xxxxxxxxxxxxxxxx>
- [PATCH v3 3/3] arm64: dts: ti: k3-j784s4-evm: Add overlay for PCIe0 and PCIe1 EP Mode
- From: Siddharth Vadapalli <s-vadapalli@xxxxxx>
- [PATCH v3 1/3] arm64: dts: ti: k3-j784s4-main: Add PCIe nodes
- From: Siddharth Vadapalli <s-vadapalli@xxxxxx>
- [PATCH v3 0/3] Add PCIe DT support for TI's J784S4 SoC
- From: Siddharth Vadapalli <s-vadapalli@xxxxxx>
- [PATCH v3 2/3] arm64: dts: ti: k3-j784s4-evm: Enable PCIe0 and PCIe1 in RC Mode
- From: Siddharth Vadapalli <s-vadapalli@xxxxxx>
- Re: [v6 03/20] dt-bindings: fsi: Document the IBM SCOM engine
- From: Markus Elfring <Markus.Elfring@xxxxxx>
- [PATCH v2 5/5] firmware: imx: adds miscdev
- From: Pankaj Gupta <pankaj.gupta@xxxxxxx>
- [PATCH v2 4/5] firmware: imx: add driver for NXP EdgeLock Enclave
- From: Pankaj Gupta <pankaj.gupta@xxxxxxx>
- [PATCH v2 3/5] arm64: dts: imx8ulp-evk: add nxp secure enclave firmware
- From: Pankaj Gupta <pankaj.gupta@xxxxxxx>
- [PATCH v2 2/5] dt-bindings: arm: fsl: add imx-se-fw binding doc
- From: Pankaj Gupta <pankaj.gupta@xxxxxxx>
- [PATCH v2 1/5] Documentation/firmware: add imx/se to other_interfaces
- From: Pankaj Gupta <pankaj.gupta@xxxxxxx>
- [PATCH v2 0/5] Communication Interface to NXP secure-enclave HW IP like Edgelock Enclave
- From: Pankaj Gupta <pankaj.gupta@xxxxxxx>
- Re: [PATCH v7 17/23] dt-bindings: crypto: meson: remove clk and second interrupt line for GXL
- From: Alexey Romanov <avromanov@xxxxxxxxxxxxxxxxx>
- Re: [PATCH] arm64: dts: mt7622: fix switch probe on bananapi-r64
- From: "Linux regression tracking (Thorsten Leemhuis)" <regressions@xxxxxxxxxxxxx>
- Re: [v5,3/3] drm/mediatek: Implement OF graphs support for display paths
- From: Chen-Yu Tsai <wenst@xxxxxxxxxxxx>
- [PATCH v5 3/5] reset: imx-aux: Add i.MX auxiliary reset driver
- From: Shengjiu Wang <shengjiu.wang@xxxxxxx>
- [PATCH v5 2/5] clk: imx: clk-audiomix: Add reset controller
- From: Shengjiu Wang <shengjiu.wang@xxxxxxx>
- [PATCH v5 5/5] clk: imx: clk-audiomix: Corrent parent clock for earc_phy and audpll
- From: Shengjiu Wang <shengjiu.wang@xxxxxxx>
- [PATCH v5 1/5] dt-bindings: clock: imx8mp: Add #reset-cells property
- From: Shengjiu Wang <shengjiu.wang@xxxxxxx>
- [PATCH v5 4/5] clk: imx: clk-audiomix: Add CLK_SET_RATE_PARENT flags for clocks
- From: Shengjiu Wang <shengjiu.wang@xxxxxxx>
- [PATCH v5 0/5] clk: imx: clk-audiomix: Improvement for audiomix
- From: Shengjiu Wang <shengjiu.wang@xxxxxxx>
- Re: [PATCH 1/2] dt-bindings: input: document Novatek NVT touchscreen controller
- From: Joel Selvaraj <joelselvaraj.oss@xxxxxxxxx>
- Re: [PATCH 1/2] dt-bindings: input: document Novatek NVT touchscreen controller
- From: Joel Selvaraj <joelselvaraj.oss@xxxxxxxxx>
- Re: [PATCH 1/7] dt-bindings: display/msm/dsi: allow specifying TE source
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- Re: [PATCH] arm64: dts: ti: k3-j722s-evm: Mark eMMC as non removable
- From: Vignesh Raghavendra <vigneshr@xxxxxx>
- Re: [PATCH v4 3/5] media: mali-c55: Add Mali-C55 ISP driver
- From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
- Re: [PATCH v4 3/5] media: mali-c55: Add Mali-C55 ISP driver
- From: Jacopo Mondi <jacopo.mondi@xxxxxxxxxxxxxxxx>
- Re: [PATCH 0/8] dma-buf: heaps: Support carved-out heaps and ECC related-flags
- From: Daniel Vetter <daniel@xxxxxxxx>
- Re: [PATCH v6 03/20] dt-bindings: fsi: Document the IBM SCOM engine
- From: Conor Dooley <conor.dooley@xxxxxxxxxxxxx>
- Re: [PATCH v16 08/22] PCI: microchip: Change the argument of plda_pcie_setup_iomems()
- From: Conor Dooley <conor.dooley@xxxxxxxxxxxxx>
- Re: [PATCH v16 08/22] PCI: microchip: Change the argument of plda_pcie_setup_iomems()
- From: Minda Chen <minda.chen@xxxxxxxxxxxxxxxx>
- Re: [PATCH v6 03/20] dt-bindings: fsi: Document the IBM SCOM engine
- From: Markus Elfring <Markus.Elfring@xxxxxx>
- Re: [PATCH 1/3] arch/arm64: dts: ac2xx: make common the sound card
- From: Jan Dakinevich <jan.dakinevich@xxxxxxxxxxxxxxxxx>
- [PATCH v8 23/23] ARM: dts: aspeed: yosemite4: add fan led config
- From: Delphine CC Chiu <Delphine_CC_Chiu@xxxxxxxxxx>
- [PATCH v8 22/23] ARM: dts: aspeed: yosemite4: Revise i2c duty-cycle
- From: Delphine CC Chiu <Delphine_CC_Chiu@xxxxxxxxxx>
- [PATCH v8 21/23] ARM: dts: aspeed: yosemite4: support NIC eeprom
- From: Delphine CC Chiu <Delphine_CC_Chiu@xxxxxxxxxx>
- [PATCH v8 20/23] ARM: dts: aspeed: yosemite4: support medusa board adc sensors
- From: Delphine CC Chiu <Delphine_CC_Chiu@xxxxxxxxxx>
- [PATCH v8 19/23] ARM: dts: aspeed: yosemite4: support mux to cpld
- From: Delphine CC Chiu <Delphine_CC_Chiu@xxxxxxxxxx>
- [PATCH v8 18/23] ARM: dts: aspeed: yosemite4: add mctp config for NIC
- From: Delphine CC Chiu <Delphine_CC_Chiu@xxxxxxxxxx>
- [PATCH v8 17/23] ARM: dts: aspeed: yosemite4: Revise mx31790 fan tach config
- From: Delphine CC Chiu <Delphine_CC_Chiu@xxxxxxxxxx>
- [PATCH v8 16/23] ARM: dts: aspeed: yosemite4: Initialize bmc gpio state
- From: Delphine CC Chiu <Delphine_CC_Chiu@xxxxxxxxxx>
- [PATCH v8 15/23] ARM: dts: aspeed: yosemite4: Remove idle state setting for yosemite4 NIC connection
- From: Delphine CC Chiu <Delphine_CC_Chiu@xxxxxxxxxx>
- [PATCH v8 14/23] ARM: dts: aspeed: yosemite4: Revise ina233 config for yosemite4 schematic change
- From: Delphine CC Chiu <Delphine_CC_Chiu@xxxxxxxxxx>
- [PATCH v8 13/23] ARM: dts: aspeed: yosemite4: Revise adc128d818 adc mode for yosemite4 schematic change
- From: Delphine CC Chiu <Delphine_CC_Chiu@xxxxxxxxxx>
- [PATCH v8 12/23] ARM: dts: aspeed: yosemite4: Remove temperature sensor for yosemite4 schematic change
- From: Delphine CC Chiu <Delphine_CC_Chiu@xxxxxxxxxx>
- [PATCH v8 11/23] ARM: dts: aspeed: yosemite4: Add eeprom for yosemite4 use
- From: Delphine CC Chiu <Delphine_CC_Chiu@xxxxxxxxxx>
- [PATCH v8 10/23] ARM: dts: aspeed: yosemite4: Add power sensor for power module reading
- From: Delphine CC Chiu <Delphine_CC_Chiu@xxxxxxxxxx>
- [PATCH v8 09/23] ARM: dts: aspeed: yosemite4: Enable interrupt setting for pca9555
- From: Delphine CC Chiu <Delphine_CC_Chiu@xxxxxxxxxx>
- [PATCH v8 08/23] ARM: dts: aspeed: yosemite4: Remove space for adm1272 compatible
- From: Delphine CC Chiu <Delphine_CC_Chiu@xxxxxxxxxx>
- [PATCH v8 07/23] ARM: dts: aspeed: yosemite4: Add gpio pca9506
- From: Delphine CC Chiu <Delphine_CC_Chiu@xxxxxxxxxx>
- [PATCH v8 05/23] ARM: dts: aspeed: yosemite4: Revise quad mode to dual mode
- From: Delphine CC Chiu <Delphine_CC_Chiu@xxxxxxxxxx>
- [PATCH v8 06/23] ARM: dts: aspeed: yosemite4: Revise power sensor adm1281 for schematic change
- From: Delphine CC Chiu <Delphine_CC_Chiu@xxxxxxxxxx>
- [PATCH v8 04/23] ARM: dts: aspeed: yosemite4: Enable watchdog2
- From: Delphine CC Chiu <Delphine_CC_Chiu@xxxxxxxxxx>
- [PATCH v8 03/23] ARM: dts: aspeed: yosemite4: Enable spi-gpio setting
- From: Delphine CC Chiu <Delphine_CC_Chiu@xxxxxxxxxx>
- [PATCH v8 02/23] ARM: dts: aspeed: yosemite4: Enable adc15
- From: Delphine CC Chiu <Delphine_CC_Chiu@xxxxxxxxxx>
- [PATCH v8 01/23] ARM: dts: aspeed: yosemite4: Revise i2c-mux devices
- From: Delphine CC Chiu <Delphine_CC_Chiu@xxxxxxxxxx>
- [PATCH v8 00/23] Add i2c-mux and eeprom devices for Meta Yosemite 4
- From: Delphine CC Chiu <Delphine_CC_Chiu@xxxxxxxxxx>
- Re: [PATCH RFT 0/7] arm64: qcom: allow up to 4 lanes for the Type-C DisplayPort Altmode
- From: neil.armstrong@xxxxxxxxxx
- Re: [PATCH 2/3] dt-bindings: iommu: qcom,iommu: Add MSM8953 GPU IOMMU to SMMUv2 compatibles
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH 1/3] dt-bindings: arm: qcom: Add Lenovo Smart Tab M10 (WiFi)
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- [PATCH v5 12/16] ASoC: codecs: add MT6357 support
- From: amergnat@xxxxxxxxxxxx
- [PATCH v5 16/16] arm64: dts: mediatek: add audio support for mt8365-evk
- From: Alexandre Mergnat <amergnat@xxxxxxxxxxxx>
- [PATCH v5 15/16] arm64: dts: mediatek: add afe support for mt8365 SoC
- From: Alexandre Mergnat <amergnat@xxxxxxxxxxxx>
- [PATCH v5 14/16] arm64: defconfig: enable mt8365 sound
- From: Alexandre Mergnat <amergnat@xxxxxxxxxxxx>
- [PATCH v5 11/16] ASoC: mediatek: mt8365: Add the AFE driver support
- From: Alexandre Mergnat <amergnat@xxxxxxxxxxxx>
- [PATCH v5 13/16] ASoC: mediatek: Add MT8365 support
- From: Alexandre Mergnat <amergnat@xxxxxxxxxxxx>
- [PATCH v5 10/16] ASoc: mediatek: mt8365: Add a specific soundcard for EVK
- From: amergnat@xxxxxxxxxxxx
- [PATCH v5 09/16] ASoC: mediatek: mt8365: Add PCM DAI support
- From: Alexandre Mergnat <amergnat@xxxxxxxxxxxx>
- [PATCH v5 08/16] ASoC: mediatek: mt8365: Add DMIC DAI support
- From: Alexandre Mergnat <amergnat@xxxxxxxxxxxx>
- [PATCH v5 07/16] ASoC: mediatek: mt8365: Add ADDA DAI support
- From: Alexandre Mergnat <amergnat@xxxxxxxxxxxx>
- [PATCH v5 06/16] ASoC: mediatek: mt8365: Add I2S DAI support
- From: Alexandre Mergnat <amergnat@xxxxxxxxxxxx>
- [PATCH v5 04/16] ASoC: mediatek: mt8365: Add common header
- From: Alexandre Mergnat <amergnat@xxxxxxxxxxxx>
- [PATCH v5 05/16] ASoC: mediatek: mt8365: Add audio clock control support
- From: Alexandre Mergnat <amergnat@xxxxxxxxxxxx>
- [PATCH v5 03/16] dt-bindings: mfd: mediatek: Add codec property for MT6357 PMIC
- From: Alexandre Mergnat <amergnat@xxxxxxxxxxxx>
- [PATCH v5 02/16] ASoC: dt-bindings: mediatek,mt8365-mt6357: Add audio sound card document
- From: Alexandre Mergnat <amergnat@xxxxxxxxxxxx>
- [PATCH v5 01/16] ASoC: dt-bindings: mediatek,mt8365-afe: Add audio afe document
- From: Alexandre Mergnat <amergnat@xxxxxxxxxxxx>
- [PATCH v5 00/16] Add audio support for the MediaTek Genio 350-evk board
- From: Alexandre Mergnat <amergnat@xxxxxxxxxxxx>
- RE: [PATCH 3/5] mfd: adp5585: Add Analog Devices ADP5585 core support
- From: Bough Chen <haibo.chen@xxxxxxx>
- Re: [PATCH v4 3/5] media: mali-c55: Add Mali-C55 ISP driver
- From: Sakari Ailus <sakari.ailus@xxxxxx>
- [PATCH v8 23/23] ARM: dts: aspeed: yosemite4: add fan led config
- From: Delphine CC Chiu <Delphine_CC_Chiu@xxxxxxxxxx>
- [PATCH v8 22/23] ARM: dts: aspeed: yosemite4: Revise i2c duty-cycle
- From: Delphine CC Chiu <Delphine_CC_Chiu@xxxxxxxxxx>
- [PATCH v8 20/23] ARM: dts: aspeed: yosemite4: support medusa board adc sensors
- From: Delphine CC Chiu <Delphine_CC_Chiu@xxxxxxxxxx>
- [PATCH v8 21/23] ARM: dts: aspeed: yosemite4: support NIC eeprom
- From: Delphine CC Chiu <Delphine_CC_Chiu@xxxxxxxxxx>
- [PATCH v8 19/23] ARM: dts: aspeed: yosemite4: support mux to cpld
- From: Delphine CC Chiu <Delphine_CC_Chiu@xxxxxxxxxx>
- [PATCH v8 18/23] ARM: dts: aspeed: yosemite4: add mctp config for NIC
- From: Delphine CC Chiu <Delphine_CC_Chiu@xxxxxxxxxx>
- [PATCH v8 16/23] ARM: dts: aspeed: yosemite4: Initialize bmc gpio state
- From: Delphine CC Chiu <Delphine_CC_Chiu@xxxxxxxxxx>
- [PATCH v8 17/23] ARM: dts: aspeed: yosemite4: Revise mx31790 fan tach config
- From: Delphine CC Chiu <Delphine_CC_Chiu@xxxxxxxxxx>
- [PATCH v8 15/23] ARM: dts: aspeed: yosemite4: Remove idle state setting for yosemite4 NIC connection
- From: Delphine CC Chiu <Delphine_CC_Chiu@xxxxxxxxxx>
- [PATCH v8 14/23] ARM: dts: aspeed: yosemite4: Revise ina233 config for yosemite4 schematic change
- From: Delphine CC Chiu <Delphine_CC_Chiu@xxxxxxxxxx>
[Index of Archives]
[Device Tree Spec]
[Linux USB Devel]
[Video for Linux]
[Scanner Discussion]
[Linux SCSI]
[Samba]
[Yosemite News]