This series adds a V4L2 sensor driver for the Sony IMX728, and related
devicetree overlays.
v4l2-compliance 1.26.1-5142, 64 bits, 64-bit time_t
v4l2-compliance SHA: 4aee01a02792 2023-12-12 21:40:38
Compliance test for device /dev/v4l-subdev4:
Driver Info:
Driver version : 6.12.9
Capabilities : 0x00000000
Required ioctls:
test VIDIOC_SUDBEV_QUERYCAP: OK
test invalid ioctls: OK
Allow for multiple opens:
test second /dev/v4l-subdev4 open: OK
test VIDIOC_SUBDEV_QUERYCAP: OK
test for unlimited opens: OK
Debug ioctls:
test VIDIOC_LOG_STATUS: OK (Not Supported)
Input ioctls:
test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported)
test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported)
test VIDIOC_ENUMAUDIO: OK (Not Supported)
test VIDIOC_G/S/ENUMINPUT: OK (Not Supported)
test VIDIOC_G/S_AUDIO: OK (Not Supported)
Inputs: 0 Audio Inputs: 0 Tuners: 0
Output ioctls:
test VIDIOC_G/S_MODULATOR: OK (Not Supported)
test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
test VIDIOC_ENUMAUDOUT: OK (Not Supported)
test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported)
test VIDIOC_G/S_AUDOUT: OK (Not Supported)
Outputs: 0 Audio Outputs: 0 Modulators: 0
Input/Output configuration ioctls:
test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported)
test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported)
test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported)
test VIDIOC_G/S_EDID: OK (Not Supported)
Control ioctls:
test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK
test VIDIOC_QUERYCTRL: OK
test VIDIOC_G/S_CTRL: OK
test VIDIOC_G/S/TRY_EXT_CTRLS: OK
test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK
test VIDIOC_G/S_JPEGCOMP: OK (Not Supported)
Standard Controls: 9 Private Controls: 0
Format ioctls:
test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK (Not Supported)
test VIDIOC_G/S_PARM: OK (Not Supported)
test VIDIOC_G_FBUF: OK (Not Supported)
test VIDIOC_G_FMT: OK (Not Supported)
test VIDIOC_TRY_FMT: OK (Not Supported)
test VIDIOC_S_FMT: OK (Not Supported)
test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported)
test Cropping: OK (Not Supported)
test Composing: OK (Not Supported)
test Scaling: OK (Not Supported)
Codec ioctls:
test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported)
test VIDIOC_G_ENC_INDEX: OK (Not Supported)
test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported)
Buffer ioctls:
test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK (Not Supported)
test CREATE_BUFS maximum buffers: OK
test VIDIOC_EXPBUF: OK (Not Supported)
test Requests: OK (Not Supported)
Total for device /dev/v4l-subdev4: 44, Succeeded: 44, Failed: 0, Warnings: 0
This is a v3 of a series that was originally sent last summer[0].
[0]: https://lore.kernel.org/r/linux-media/20240628-imx728-driver-v2-0-80efa6774286@xxxxxxxxxxxxxxxxx/
v2 -> v3:
- Update maintainer
- Update bindings example
- Add devicetree overlays
- The driver now supports SRGGB12_1X12, not SRGGB10_1X10
- The driver now outputs at 3856x2176, not 2840x2160
- Fixed exposure, again controls
- Removed duplicate register writes (removed repeat HDR writes, etc)
- Fixed imx728_wait_for_state use of the cci_* API
- Re-added _imx728_set_routing (necessary for imx728_init_state)
Sebastian LaVine (4):
media: dt-bindings: Add Sony IMX728
media: i2c: Add driver for Sony IMX728
arm64: dts: ti: k3-am62a7-sk: Add overlay for fusion 2 board
arm64: dts: ti: Add overlays for IMX728 RCM
.../bindings/media/i2c/sony,imx728.yaml | 96 +
MAINTAINERS | 9 +
arch/arm64/boot/dts/ti/Makefile | 4 +
.../boot/dts/ti/k3-am62a7-sk-fusion-2.dtso | 115 +
.../dts/ti/k3-fpdlink-imx728-rcm-0-0.dtso | 108 +
arch/arm64/configs/defconfig | 1 +
drivers/media/i2c/Kconfig | 12 +
drivers/media/i2c/Makefile | 1 +
drivers/media/i2c/imx728.c | 9655 +++++++++++++++++
9 files changed, 10001 insertions(+)
create mode 100644 Documentation/devicetree/bindings/media/i2c/sony,imx728.yaml
create mode 100644 arch/arm64/boot/dts/ti/k3-am62a7-sk-fusion-2.dtso
create mode 100644 arch/arm64/boot/dts/ti/k3-fpdlink-imx728-rcm-0-0.dtso
create mode 100644 drivers/media/i2c/imx728.c
--
2.34.1
Please be aware that this email includes email addresses outside of the organization.
