The AD7768-1 provides a buffered common-mode voltage output
on the VCM pin that can be used to bias analog input signals.
Add regulators property to enable the use of the VCM output,
referenced here as vcm_output, by any other device.
Signed-off-by: Jonathan Santos <Jonathan.Santos@xxxxxxxxxx>
---
v3 Changes:
* VCM is now provided as a regulator within the device, instead of a
custom property.
v2 Changes:
* New patch in v2.
---
.../bindings/iio/adc/adi,ad7768-1.yaml | 21 +++++++++++++++++++
1 file changed, 21 insertions(+)
diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7768-1.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7768-1.yaml
index e2f9782b5fc8..38f7bb0a0e20 100644
--- a/Documentation/devicetree/bindings/iio/adc/adi,ad7768-1.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7768-1.yaml
@@ -59,6 +59,19 @@ properties:
in any way, for example if the filter decimation rate changes.
As the line is active low, it should be marked GPIO_ACTIVE_LOW.
+ regulators:
+ type: object
+ description:
+ list of regulators provided by this controller.
+
+ properties:
+ vcm_output:
+ $ref: /schemas/regulator/regulator.yaml#
+ type: object
+ unevaluatedProperties: false
+
+ additionalProperties: false
+
reset-gpios:
maxItems: 1
@@ -152,6 +165,14 @@ examples:
reg = <0>;
label = "channel_0";
};
+
+ regulators {
+ vcm_reg: vcm_output {
+ regulator-name = "vcm_output";
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <2500000>;
+ };
+ };
};
};
...
--
2.34.1
