From: Luca Weiss <luca.weiss@xxxxxxxxxxxxx>
When num-channels and qcom,num-ees is not provided in devicetree, the
driver will try to read these values from the registers during probe but
this fails if the interconnect is not on and then crashes the system.
So we can provide these properties in devicetree (queried after patching
BAM driver to enable the necessary interconnect) so we can probe
cryptobam without reading registers and then also use the QCE as
expected.
Fixes: 4d29db204361 ("arm64: dts: qcom: sm8350: fix BAM DMA crash and reboot")
Fixes: f1040a7fe8f0 ("arm64: dts: qcom: sm8350: Add Crypto Engine support")
Signed-off-by: Luca Weiss <luca.weiss@xxxxxxxxxxxxx>
Signed-off-by: Stephan Gerhold <stephan.gerhold@xxxxxxxxxx>
---
Luca sent this patch before, but it was never applied:
https://lore.kernel.org/linux-arm-msm/20240108-sm8350-qce-v1-1-b7d586ff38af@xxxxxxxxxxxxx/
---
arch/arm64/boot/dts/qcom/sm8350.dtsi | 6 ++----
1 file changed, 2 insertions(+), 4 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sm8350.dtsi b/arch/arm64/boot/dts/qcom/sm8350.dtsi
index 69da30f35baaab67e51afcbca3486fb89c14f281..5f93cae01b060cf99c0de56f603e860aeebc5f67 100644
--- a/arch/arm64/boot/dts/qcom/sm8350.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8350.dtsi
@@ -1806,11 +1806,11 @@ cryptobam: dma-controller@1dc4000 {
interrupts = <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>;
#dma-cells = <1>;
qcom,ee = <0>;
+ qcom,num-ees = <4>;
+ num-channels = <16>;
qcom,controlled-remotely;
iommus = <&apps_smmu 0x594 0x0011>,
<&apps_smmu 0x596 0x0011>;
- /* FIXME: Probing BAM DMA causes some abort and system hang */
- status = "fail";
};
crypto: crypto@1dfa000 {
@@ -1822,8 +1822,6 @@ crypto: crypto@1dfa000 {
<&apps_smmu 0x596 0x0011>;
interconnects = <&aggre2_noc MASTER_CRYPTO 0 &mc_virt SLAVE_EBI1 0>;
interconnect-names = "memory";
- /* FIXME: dependency BAM DMA is disabled */
- status = "disabled";
};
ipa: ipa@1e40000 {
--
2.47.2
