On Tue, Feb 11, 2025 at 09:03:20AM +0100, Krzysztof Kozlowski wrote: > On 11/02/2025 06:15, Haylen Chu wrote: > > On Sat, Jan 04, 2025 at 11:07:58AM +0100, Krzysztof Kozlowski wrote: > >> On Fri, Jan 03, 2025 at 09:56:35PM +0000, Haylen Chu wrote: > >>> Add documentation to describe Spacemit K1 system controller registers. > >>> > >>> Signed-off-by: Haylen Chu <heylenay@xxxxxxx> > >>> --- > >>> .../soc/spacemit/spacemit,k1-syscon.yaml | 52 +++++++++++++++++++ > >>> 1 file changed, 52 insertions(+) > >>> create mode 100644 Documentation/devicetree/bindings/soc/spacemit/spacemit,k1-syscon.yaml > >>> > >>> diff --git a/Documentation/devicetree/bindings/soc/spacemit/spacemit,k1-syscon.yaml b/Documentation/devicetree/bindings/soc/spacemit/spacemit,k1-syscon.yaml > >>> new file mode 100644 > >>> index 000000000000..79c4a74ff30e > >>> --- /dev/null > >>> +++ b/Documentation/devicetree/bindings/soc/spacemit/spacemit,k1-syscon.yaml > >>> @@ -0,0 +1,52 @@ > >>> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > >>> +%YAML 1.2 > >>> +--- > >>> +$id: http://devicetree.org/schemas/soc/spacemit/spacemit,k1-syscon.yaml# > >>> +$schema: http://devicetree.org/meta-schemas/core.yaml# > >>> + > >>> +title: Spacemit K1 SoC System Controller > >>> + > >>> +maintainers: > >>> + - Haylen Chu <heylenay@xxxxxxx> > >>> + > >>> +description: > >>> + The Spacemit K1 SoC system controller provides access to shared register files > >>> + for related SoC modules, such as clock controller and reset controller. > >>> + > >>> +properties: > >>> + compatible: > >>> + items: > >>> + - enum: > >>> + - spacemit,k1-apbc-syscon > >>> + - spacemit,k1-apbs-syscon > >>> + - spacemit,k1-apmu-syscon > >>> + - spacemit,k1-mpmu-syscon > >>> + - const: syscon > >>> + - const: simple-mfd > >>> + > >>> + reg: > >>> + maxItems: 1 > >>> + > >>> + clock-controller: > >>> + $ref: /schemas/clock/spacemit,k1-ccu.yaml# > >>> + type: object > >> > >> So now we see the full picture and it leads to questions. > >> > >> 1. Why spacemit,k1-apbc-syscon with spacemit,k1-ccu-apmu child is a > >> correct combination? > >> > >> 2. Why having this split in the first place? Please confirm that clock > >> controller is really, really a separate device and its child in > >> datasheet. IOW, fake child for your Linux is a no-go. Fake child while > >> devices are independent is another no-go. > > > > These syscons are introduced because the clock controllers share > > registers with reset controllers. Folding them into the parents results > > So a fake split... > > > in devicetree nodes act as both reset and clock controllers, like what > > Which is correct hardware representation, isn't it? > > > has been done for Rockchip SoCs. Such folding isn't practical for the > > MPMU region either, since watchdog and other misc bits (e.g. PLL lock > > status) locates in it. I have to correct that the watchdog doesn't stay in the MPMU region, I misremembered it. > Hm? Why? You have a device which is reset and clock controller, so why > one device node is not practical? Other vendors do not have problem with > this. Merging reset and clock controllers together is fine to me. What I want to mention is that APMU and MPMU, abbreviated from Application/Main Power Management Unit, contain not only clock/reset-related registers but also power management ones[1]. Additionally, the PLL lock status bits locate at MPMU, split from the PLL configuration registers as you've already seen in the binding of spacemit,k1-ccu-apbs where I refer to it with a phandle. Since reset/clock and power management registers interleave in the MMIO region, do you think syscons are acceptable in this situation or it should be handled in another way? The reset and clock controllers could still be folded together as they share the same registers. The device tree will look like, syscon_mpmu: system-controller@d4050000 { compatible = "spacemit,mpmu-syscon", "syscon", "simple-mfd"; reg = <0xd4050000 0x10000>; cru_mpmu: clock-controller { compatible = "spacemit,k1-cru-mpmu"; #clock-cells = <1>; #reset-cells = <1>; }; power_mpmu: power-controller { compatible = "spacemit,k1-powerdomain-mpmu"; /* ... */ #power-domain-cells = <0>; }; }; For the other two clock controllers (APBS and APBC), syscons are really unnecessary and it's simple to fold them. > > > > If you're more comfortable with reset and clock controllers folded > > together and eliminating most of these syscons, I'm willing to make the > > change. > > This is expected. Thanks for the explanation. > > > Best regards, > Krzysztof Best regards, Haylen Chu [1]: https://developer.spacemit.com/documentation?token=T7TnwVZz1iPBk1kKwAPc6lyKnNb#part958
