Linux Device Tree

• Thread Index

• [PATCH v28 32/33] ALSA: usb-audio: Allow for rediscovery of connected USB SND devices
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v28 26/32] ALSA: usb-audio: Introduce USB SND platform op callbacks
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v28 22/33] ASoC: qcom: qdsp6: Introduce USB AFE port to q6dsp
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v28 27/33] ALSA: usb-audio: Introduce USB SND platform op callbacks
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v28 26/33] ASoC: qcom: qdsp6: Fetch USB offload mapped card and PCM device
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v28 23/32] ASoC: qcom: qdsp6: Add USB backend ASoC driver for Q6
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v28 17/33] ASoC: usb: Create SOC USB SND jack kcontrol
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v28 29/32] ALSA: usb-audio: qcom: Don't allow USB offload path if PCM device is in use
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v28 16/32] ASoC: usb: Create SOC USB SND jack kcontrol
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v28 19/33] ASoC: doc: Add documentation for SOC USB
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v28 23/33] ASoC: qcom: qdsp6: q6afe: Increase APR timeout
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v28 22/32] ASoC: qcom: qdsp6: q6afe: Increase APR timeout
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v28 19/32] ASoC: dt-bindings: qcom,q6dsp-lpass-ports: Add USB_RX port
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v28 25/32] ASoC: qcom: qdsp6: Fetch USB offload mapped card and PCM device
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v28 11/33] ALSA: usb-audio: Export USB SND APIs for modules
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v28 24/33] ASoC: qcom: qdsp6: Add USB backend ASoC driver for Q6
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v28 18/33] ASoC: usb: Fetch ASoC card and pcm device information
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v28 10/33] ALSA: Add USB audio device jack type
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v28 14/33] ALSA: usb-audio: Prevent starting of audio stream if in use
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v28 20/32] ASoC: dt-bindings: Update example for enabling USB offload on SM8250
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v28 14/32] ASoC: Add SOC USB APIs for adding an USB backend
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v28 04/33] xhci: sideband: add initial api to register a sideband entity
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v28 21/33] ASoC: dt-bindings: Update example for enabling USB offload on SM8250
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v28 03/32] xhci: sideband: add initial api to register a sideband entity
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v28 12/33] ALSA: usb-audio: Check for support for requested audio format
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v28 15/33] ASoC: Add SOC USB APIs for adding an USB backend
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v28 16/33] ASoC: usb: Add PCM format check API for USB backend
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v28 17/32] ASoC: usb: Fetch ASoC card and pcm device information
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v28 10/32] ALSA: usb-audio: Export USB SND APIs for modules
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v28 13/33] ALSA: usb-audio: Save UAC sample size information
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v28 02/33] xhci: add helper to stop endpoint and wait for completion
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v28 01/32] xhci: add helper to stop endpoint and wait for completion
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v28 08/32] usb: dwc3: Specify maximum number of XHCI interrupters
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v28 07/33] usb: host: xhci-mem: Allow for interrupter clients to choose specific index
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v28 13/32] ALSA: usb-audio: Prevent starting of audio stream if in use
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v28 09/33] usb: dwc3: Specify maximum number of XHCI interrupters
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v28 06/33] usb: host: xhci-mem: Cleanup pending secondary event ring events
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v28 09/32] ALSA: Add USB audio device jack type
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v28 08/33] usb: host: xhci-plat: Set XHCI max interrupters if property is present
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v28 04/32] usb: xhci: xhci-sideband: Set IMOD for xHCI sideband clients
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v28 06/32] usb: host: xhci-mem: Allow for interrupter clients to choose specific index
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v28 05/32] usb: host: xhci-mem: Cleanup pending secondary event ring events
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v28 05/33] usb: xhci: xhci-sideband: Set IMOD for xHCI sideband clients
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v28 11/32] ALSA: usb-audio: Check for support for requested audio format
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v28 12/32] ALSA: usb-audio: Save UAC sample size information
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v28 03/33] usb: host: xhci: Repurpose event handler for skipping interrupter events
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v28 07/32] usb: host: xhci-plat: Set XHCI max interrupters if property is present
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v28 02/32] usb: host: xhci: Repurpose event handler for skipping interrupter events
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v28 01/33] xhci: support setting interrupt moderation IMOD for secondary interrupters
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• Re: [PATCH v2 1/2] arm64: dts: broadcom: bcmbca: bcm4908: Reserve CFE stub area
  • From: Sam Edwards <cfsworks@xxxxxxxxx>
• Re: [PATCH v5 1/2] dt-bindings: arm: aspeed: add IBM SBP1 board
  • From: Andrew Jeffery <andrew@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] arm64: dts: broadcom: Fix L2 linesize for Raspberry Pi 5
  • From: Florian Fainelli <florian.fainelli@xxxxxxxxxxxx>
• Re: [PATCH v2 1/2] arm64: dts: broadcom: bcmbca: bcm4908: Reserve CFE stub area
  • From: Florian Fainelli <florian.fainelli@xxxxxxxxxxxx>
• Re: [PATCH v4 1/3] of: address: Add parent_bus_addr to struct of_pci_range
  • From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: arm: bcm2835: Specify /system/linux,revision property
  • From: Florian Fainelli <florian.fainelli@xxxxxxxxxxxx>
• Re: [PATCH v4 13/18] dt-bindings: usb-switch: Extend for DisplayPort altmode
  • From: Stephen Boyd <swboyd@xxxxxxxxxxxx>
• Re: [PATCH v4 1/3] of: address: Add parent_bus_addr to struct of_pci_range
  • From: Frank Li <Frank.li@xxxxxxx>
• Re: [PATCH 4/8] ARM: dts: bcm6846: Add MDIO control block
  • From: Florian Fainelli <florian.fainelli@xxxxxxxxxxxx>
• Re: [PATCH 1/7] PCI: Constify pci_register_io_range() fwnode_handle
  • From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
• [PATCH 8/8] ARM: dts: broadcom: Add Genexis XG6846B DTS file
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH 7/8] dt-bindings: arm: bcmbca: Add Genexis XG6846B
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH 6/8] dt-bindings: vendor-prefixes: Add Genexis
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH 3/8] ARM: dts: bcm6846: Add GPIO blocks
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH 5/8] ARM: dts: bcm6846: Add LED controller
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH 4/8] ARM: dts: bcm6846: Add MDIO control block
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH 1/8] ARM: dts: bcm6846: Add iproc rng
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH 2/8] ARM: dts: bcm6846: Enable watchdog
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH 0/8] ARM: dts: Add some BCM6846 device tree
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v4 1/3] of: address: Add parent_bus_addr to struct of_pci_range
  • From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
• Re: [PATCH v5 3/5] mfd: airoha: Add support for Airoha EN7581 MFD
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• Re: [PATCH v2 5/5] arm64: dts: qcom: sc8280xp: Add Microsoft Surface Pro 9 5G
  • From: Jérôme de Bretagne <jerome.debretagne@xxxxxxxxx>
• [PATCH v1 13/13] iio: chemical: bme680: Add support for preheat current
  • From: vamoirid <vassilisamir@xxxxxxxxx>
• [PATCH v1 12/13] iio: chemical: bme680: Add triggered buffer support
  • From: vamoirid <vassilisamir@xxxxxxxxx>
• [PATCH v1 11/13] iio: chemical: bme680: Add SCALE and RAW channels
  • From: vamoirid <vassilisamir@xxxxxxxxx>
• [PATCH v1 10/13] iio: chemical: bme680: generalize read_*() functions
  • From: vamoirid <vassilisamir@xxxxxxxxx>
• [PATCH v1 09/13] iio: chemical: bme680: Move ambient temperature to attributes
  • From: vamoirid <vassilisamir@xxxxxxxxx>
• [PATCH v1 08/13] iio: chemical: bme680: add power management
  • From: vamoirid <vassilisamir@xxxxxxxxx>
• [PATCH v1 07/13] iio: chemical: bme680: add regulators
  • From: vamoirid <vassilisamir@xxxxxxxxx>
• [PATCH v1 06/13] dt-bindings: iio: add binding for BME680 driver
  • From: vamoirid <vassilisamir@xxxxxxxxx>
• [PATCH v1 05/13] iio: chemical: bme680: refactorize set_mode() mode
  • From: vamoirid <vassilisamir@xxxxxxxxx>
• [PATCH v1 04/13] iio: chemical: bme680: move to fsleep()
  • From: vamoirid <vassilisamir@xxxxxxxxx>
• [PATCH v1 03/13] iio: chemical: bme680: fix startup time
  • From: vamoirid <vassilisamir@xxxxxxxxx>
• [PATCH v1 02/13] iio: chemical: bme680: avoid using camel case
  • From: vamoirid <vassilisamir@xxxxxxxxx>
• [PATCH v1 01/13] iio: chemical: bme680: Fix indentation and unnecessary spaces
  • From: vamoirid <vassilisamir@xxxxxxxxx>
• [PATCH v1 00/13]: chemical: bme680: 2nd set of clean and add
  • From: vamoirid <vassilisamir@xxxxxxxxx>
• Re: [PATCH v6 6/7] power: supply: max77705: Add fuel gauge driver for Maxim 77705
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v2 00/14] Fixing some dtbscheck warnings
  • From: Heiko Stuebner <heiko@xxxxxxxxx>
• Re: [PATCH] arm64: dts: rockchip: Prevent thermal runaways in RK3308 SoC dtsi
  • From: Heiko Stuebner <heiko@xxxxxxxxx>
• Re: [PATCH] arm64: dts: rockchip: Add dtsi file for RK3399S SoC variant
  • From: Heiko Stübner <heiko@xxxxxxxxx>
• Re: [PATCH v2 4/4] ARM: dts: omap: omap4-epson-embt2ws: add GPIO expander
  • From: Roger Quadros <rogerq@xxxxxxxxxx>
• [no subject]
  • From: Unknown
• Re: [PATCH v2 3/4] ARM: dts: omap: omap4-epson-embt2ws: add unknown gpio outputs
  • From: Roger Quadros <rogerq@xxxxxxxxxx>
• Re: [PATCH v2 2/4] ARM: dts: omap: omap4-epson-embt2ws: wire up regulators
  • From: Roger Quadros <rogerq@xxxxxxxxxx>
• Re: [PATCH v2 1/4] ARM: dts: omap: omap4-epson-embt2ws: define GPIO regulators
  • From: Roger Quadros <rogerq@xxxxxxxxxx>
• [PATCH v9 2/7] iommu/riscv: Add RISC-V IOMMU platform device driver
  • From: Tomasz Jeznach <tjeznach@xxxxxxxxxxxx>
• [PATCH v9 7/7] iommu/riscv: Paging domain support
  • From: Tomasz Jeznach <tjeznach@xxxxxxxxxxxx>
• [PATCH v9 6/7] iommu/riscv: Command and fault queue support
  • From: Tomasz Jeznach <tjeznach@xxxxxxxxxxxx>
• [PATCH v9 5/7] iommu/riscv: Device directory management.
  • From: Tomasz Jeznach <tjeznach@xxxxxxxxxxxx>
• [PATCH v9 4/7] iommu/riscv: Enable IOMMU registration and device probe.
  • From: Tomasz Jeznach <tjeznach@xxxxxxxxxxxx>
• [PATCH v9 3/7] iommu/riscv: Add RISC-V IOMMU PCIe device driver
  • From: Tomasz Jeznach <tjeznach@xxxxxxxxxxxx>
• [PATCH v9 1/7] dt-bindings: iommu: riscv: Add bindings for RISC-V IOMMU
  • From: Tomasz Jeznach <tjeznach@xxxxxxxxxxxx>
• [PATCH v9 0/7] Linux RISC-V IOMMU Support
  • From: Tomasz Jeznach <tjeznach@xxxxxxxxxxxx>
• Re: [PATCH v5 3/5] mfd: airoha: Add support for Airoha EN7581 MFD
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH net-next 07/11] PCI: Add NXP NETC vendor ID and device IDs
  • From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
• [PATCH v5 3/8] dt-bindings: clock: qcom: Add SA8775P camera clock controller
  • From: Taniya Das <quic_tdas@xxxxxxxxxxx>
• [PATCH v5 1/8] dt-bindings: clock: qcom: Add SA8775P video clock controller
  • From: Taniya Das <quic_tdas@xxxxxxxxxxx>
• Re: [PATCH v9 1/6] misc: Add support for LAN966x PCI device
  • From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
• Re: [PATCH net-next 11/11] MAINTAINERS: update ENETC driver files and maintainers
  • From: Frank Li <Frank.li@xxxxxxx>
• [PATCH v5 4/8] clk: qcom: Add support for Camera Clock Controller on SA8775P
  • From: Taniya Das <quic_tdas@xxxxxxxxxxx>
• [PATCH 4/4] drm/panel: samsung-s6e88a0-ams427ap24: Add flip option
  • From: Jakob Hauser <jahau@xxxxxxxxxxxxxx>
• [PATCH v5 6/8] clk: qcom: Add support for Display clock Controllers on SA8775P
  • From: Taniya Das <quic_tdas@xxxxxxxxxxx>
• Re: [PATCH v2 11/14] misc: rp1: RaspberryPi RP1 misc driver
  • From: kernel test robot <lkp@xxxxxxxxx>
• [PATCH v5 8/8] arm64: dts: qcom: Add support for multimedia clock controllers
  • From: Taniya Das <quic_tdas@xxxxxxxxxxx>
• [PATCH v5 7/8] arm64: dts: qcom: Update sleep_clk frequency to 32000 on SA8775P
  • From: Taniya Das <quic_tdas@xxxxxxxxxxx>
• [PATCH v5 5/8] dt-bindings: clock: qcom: Add SA8775P display clock controllers
  • From: Taniya Das <quic_tdas@xxxxxxxxxxx>
• [PATCH v5 0/8] Add support for videocc, camcc, dispcc0 and dispcc1 on Qualcomm SA8775P platform.
  • From: Taniya Das <quic_tdas@xxxxxxxxxxx>
• [PATCH v5 2/8] clk: qcom: Add support for Video clock controller on SA8775P
  • From: Taniya Das <quic_tdas@xxxxxxxxxxx>
• [PATCH 3/4] drm/panel: samsung-s6e88a0-ams427ap24: Add brightness control
  • From: Jakob Hauser <jahau@xxxxxxxxxxxxxx>
• [PATCH 2/4] drm/panel: samsung-s6e88a0-ams427ap24: Add initial driver
  • From: Jakob Hauser <jahau@xxxxxxxxxxxxxx>
• [PATCH 1/4] dt-bindings: display: panel: Add Samsung S6E88A0-AMS427AP24 bindings
  • From: Jakob Hauser <jahau@xxxxxxxxxxxxxx>
• [PATCH 0/4] Add new panel driver Samsung S6E88A0-AMS427AP24
  • From: Jakob Hauser <jahau@xxxxxxxxxxxxxx>
• Re: [PATCH v2 5/5] dt-bindings: mfd: convert zii,rave-sp.txt to yaml format
  • From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
• Re: [PATCH v2 4/5] dt-bindings: watchdog: convert zii,rave-sp-wdt.txt to yaml format
  • From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
• Re: [PATCH v6 3/3] drivers: iio: adc: add support for ad777x family
  • From: Andy Shevchenko <andy@xxxxxxxxxx>
• Re: [PATCH v2 3/5] dt-bindings: nvmem: convert zii,rave-sp-eeprom.txt to yaml format
  • From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
• Re: [PATCH v2 1/5] dt-bindings: input: convert zii,rave-sp-pwrbutton.txt to yaml
  • From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
• Re: [PATCH 2/6] dt-bindings: iio: adc: ad7380: fix ad7380-4 reference supply
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 06/11] dt-bindings: dma: stm32-dma3: introduce st,axi-max-burst-len property
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 04/11] dt-bindings: dma: stm32-dma3: prevent linked-list refactoring
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 01/11] dt-bindings: dma: stm32-dma3: prevent packing/unpacking mode
  • From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
• Re: [PATCH v2 1/7] dt-bindings: arm: Add support for Coresight TGU trace
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 2/2] arm64: dts: qcom: Enable USB controllers for QCS8300
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v4 4/4] leds: bcm63138: Add some register defines
  • From: Florian Fainelli <florian.fainelli@xxxxxxxxxxxx>
• Re: [PATCH v3 09/10] iio: adc: ad7606: Add iio-backend support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v11 1/8] spi: dt-bindings: Introduce qcom,spi-qpic-snand
  • From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
• Re: [PATCH v5 net-next 1/2] dt-bindings: net: tja11xx: add "nxp,rmii-refclk-out" property
  • From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
• Re: [PATCH v4 3/4] leds: bcm63138: Handle shift register config
  • From: Florian Fainelli <florian.fainelli@xxxxxxxxxxxx>
• Re: [PATCH v4 1/4] dt-bindings: leds: bcm63138: Add shift register bits
  • From: Florian Fainelli <florian.fainelli@xxxxxxxxxxxx>
• Re: [PATCH v6 3/3] drivers: iio: adc: add support for ad777x family
  • From: Andy Shevchenko <andy@xxxxxxxxxx>
• Re: [PATCH v4 1/4] dt-bindings: leds: bcm63138: Add shift register bits
  • From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
• Re: [PATCH v5 02/10] iio: dac: adi-axi-dac: update register names
  • From: Angelo Dureghello <adureghello@xxxxxxxxxxxx>
• Re: [PATCH v2 4/5] dt-bindings: watchdog: convert zii,rave-sp-wdt.txt to yaml format
  • From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
• Re: [PATCH v2 3/5] dt-bindings: nvmem: convert zii,rave-sp-eeprom.txt to yaml format
  • From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
• Re: [PATCH v2 1/5] dt-bindings: input: convert zii,rave-sp-pwrbutton.txt to yaml
  • From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
• Re: [PATCH v4 2/2] iio: light: opt3001: add support for TI's opt3002 light sensor
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v6 3/3] drivers: iio: adc: add support for ad777x family
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] of: Skip kunit tests when arm64+ACPI doesn't populate root node
  • From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
• Re: [PATCH v2 0/3] ARM: dts: imx[6qdl|7]-[apalis|colibri]: Update audio card names
  • From: Hiago De Franco <hiagofranco@xxxxxxxxx>
• Re: [PATCH] arm64: dts: rockchip: Prevent thermal runaways in RK3308 SoC dtsi
  • From: Trevor Woerner <twoerner@xxxxxxxxx>
• [PATCH v2 3/3] ARM: dts: imx7-colibri: Update audio card name
  • From: Hiago De Franco <hiagofranco@xxxxxxxxx>
• [PATCH v2 2/3] ARM: dts: imx6qdl-colibri: Update audio card name
  • From: Hiago De Franco <hiagofranco@xxxxxxxxx>
• [PATCH v2 1/3] ARM: dts: imx6qdl-apalis: Update audio card name
  • From: Hiago De Franco <hiagofranco@xxxxxxxxx>
• [PATCH v2 0/3] ARM: dts: imx[6qdl|7]-[apalis|colibri]: Update audio card names
  • From: Hiago De Franco <hiagofranco@xxxxxxxxx>
• Re: [PATCH net-next 05/11] net: enetc: add enetc-pf-common driver support
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v2 6/7] iio: adc: ad485x: add ad485x driver
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• Re: [PATCH] arm64: dts: broadcom: Fix L2 linesize for Raspberry Pi 5
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH 2/2] arm64: dts: qcom: Enable USB controllers for QCS8300
  • From: Krishna Kurapati <quic_kriskura@xxxxxxxxxxx>
• [PATCH 0/7] of: Constify DT structs
  • From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
• Re: [PATCH 2/2] arm64: dts: qcom: Enable USB controllers for QCS8300
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH 1/7] PCI: Constify pci_register_io_range() fwnode_handle
  • From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
• Re: [PATCH v8 2/2] iio: imu: smi240: add driver
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH v5 3/3] drivers: iio: adc: add support for ad777x family
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH] arm64: dts: broadcom: Fix L2 linesize for Raspberry Pi 5
  • From: Florian Fainelli <florian.fainelli@xxxxxxxxxxxx>
• [PATCH 7/7] of/address: Constify of_busses[] array and pointers
  • From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
• [PATCH 6/7] of: Constify safe_name() kobject arg
  • From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
• [PATCH 5/7] of: Constify of_changeset_entry function arguments
  • From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
• Re: [PATCH v3 05/12] dt-bindings: rtc: renesas,rzg3s-rtc: Document the Renesas RTCA-3 IP
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• [PATCH 4/7] of: Constify struct property pointers
  • From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
• [PATCH 3/7] of: Constify struct device_node function arguments
  • From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
• [PATCH 2/7] logic_pio: Constify fwnode_handle
  • From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
• Re: [PATCH v5 3/5] mfd: airoha: Add support for Airoha EN7581 MFD
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH 1/2] arm64: dts: qcom: Add support for usb nodes on QCS8300
  • From: Krishna Kurapati <quic_kriskura@xxxxxxxxxxx>
• Re: [PATCH v2 1/3] dt-bindings: interrupt-controller: Add Sophgo SG2044 ACLINT SSWI
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH 1/3] dt-bindings: interrupt-controller: Add Sophgo SG2044 ACLINT SSWI
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH 1/6] EDAC: fsl_ddr: Pass down fsl_mc_pdata in ddr_in32() and ddr_out32()
  • From: Frank Li <Frank.li@xxxxxxx>
• Re: [PATCH] arm64: dts: rockchip: Prevent thermal runaways in RK3308 SoC dtsi
  • From: Dragan Simic <dsimic@xxxxxxxxxxx>
• [PATCH v2 2/5] dt-bindings: backlight: convert zii,rave-sp-backlight.txt to yaml
  • From: Frank Li <Frank.Li@xxxxxxx>
• Re: [PATCH v2 0/7] clk: en7523: Update register mapping for EN7581
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [PATCH v2 5/5] dt-bindings: mfd: convert zii,rave-sp.txt to yaml format
  • From: Frank Li <Frank.Li@xxxxxxx>
• [PATCH v2 4/5] dt-bindings: watchdog: convert zii,rave-sp-wdt.txt to yaml format
  • From: Frank Li <Frank.Li@xxxxxxx>
• [PATCH v2 3/5] dt-bindings: nvmem: convert zii,rave-sp-eeprom.txt to yaml format
  • From: Frank Li <Frank.Li@xxxxxxx>
• Re: [PATCH 2/2] serial: 8250_dw: Add Sophgo SG2044 quirk
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v2 1/5] dt-bindings: input: convert zii,rave-sp-pwrbutton.txt to yaml
  • From: Frank Li <Frank.Li@xxxxxxx>
• [PATCH v2 0/5] dt-bindings: mfd: convert zii,rave-sp.txt and child txt to yaml format
  • From: Frank Li <Frank.Li@xxxxxxx>
• Re: [PATCH v3 0/2] arm64: dts: ti: k3-j784s4: Mark tps659413 regulators as bootph-all
  • From: Beleswar Prasad Padhi <b-padhi@xxxxxx>
• Re: [PATCH 0/1] Add RV1126 compatible watchdog string
  • From: karthikeyan <karthikeyan@xxxxxxxxxxx>
• Re: [PATCH 1/6] EDAC: fsl_ddr: Pass down fsl_mc_pdata in ddr_in32() and ddr_out32()
  • From: Borislav Petkov <bp@xxxxxxxxx>
• Re: [PATCH v8 7/8] platform/chrome: Introduce device tree hardware prober
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v5 1/2] riscv: dts: sophgo: Add initial SG2002 SoC device tree
  • From: Thomas Bonnefille <thomas.bonnefille@xxxxxxxxxxx>
• Re: [PATCH v3 12/12] arm64: defconfig: Enable Renesas RTCA-3 flag
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH v8 7/8] platform/chrome: Introduce device tree hardware prober
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v3 10/12] arm64: dts: renesas: rzg3s-smarc-som: Enable RTC
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH v3 11/12] arm64: defconfig: Enable VBATTB clock
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH v3 09/12] arm64: dts: renesas: rzg3s-smarc-som: Enable VBATTB
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH v3 2/3] arm64: dts: qcom: sm8250-xiaomi-elish: Add wifi node
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH net-next 10/11] net: enetc: add preliminary support for i.MX95 ENETC PF
  • From: Frank Li <Frank.li@xxxxxxx>
• Re: [PATCH v3 08/12] arm64: dts: renesas: r9a08g045: Add RTC node
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH v8 6/8] i2c: of-prober: Add GPIO support to simple helpers
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v3 07/12] arm64: dts: renesas: r9a08g045: Add VBATTB node
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH net-next 02/11] dt-bindings: net: add i.MX95 ENETC support
  • From: Frank Li <Frank.li@xxxxxxx>
• Re: [PATCH v8 4/8] i2c: Introduce OF component probe function
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH 1/2] arm64: dts: qcom: Add support for usb nodes on QCS8300
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v5 2/2] riscv: dts: sophgo: Add LicheeRV Nano board device tree
  • From: Thomas Bonnefille <thomas.bonnefille@xxxxxxxxxxx>
• [PATCH v5 1/2] riscv: dts: sophgo: Add initial SG2002 SoC device tree
  • From: Thomas Bonnefille <thomas.bonnefille@xxxxxxxxxxx>
• [PATCH v5 0/2] Add board support for Sipeed LicheeRV Nano
  • From: Thomas Bonnefille <thomas.bonnefille@xxxxxxxxxxx>
• [PATCH] arm64: dts: broadcom: Fix L2 linesize for Raspberry Pi 5
  • From: Willow Cunningham <willow.e.cunningham@xxxxxxxxx>
• RE: [PATCH v8 2/2] iio: imu: smi240: add driver
  • From: "Shen Jianping (ME-SE/EAD2)" <Jianping.Shen@xxxxxxxxxxxx>
• RE: [PATCH v6 3/3] drivers: iio: adc: add support for ad777x family
  • From: "Nechita, Ramona" <Ramona.Nechita@xxxxxxxxxx>
• Re: [PATCH 1/2] arm64: dts: qcom: Add support for usb nodes on QCS8300
  • From: Krishna Kurapati <quic_kriskura@xxxxxxxxxxx>
• Re: [PATCH v3 0/2] arm64: dts: ti: k3-j784s4: Mark tps659413 regulators as bootph-all
  • From: Andrew Halaney <ahalaney@xxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: serial: snps-dw-apb-uart: Add Sophgo SG2044 uarts
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v2] arm64: dts: qcom: qcs6490-rb3gen2: enable Bluetooth
  • From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
• RE: [PATCH v5 3/3] drivers: iio: adc: add support for ad777x family
  • From: "Nechita, Ramona" <Ramona.Nechita@xxxxxxxxxx>
• Re: [PATCH v8 1/2] dt-bindings: arm: Document the btt3 i.MX28 based board
  • From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
• [PATCH 11/11] arm64: dts: st: add DMA support on SPI instances of stm32mp25
  • From: Amelie Delaunay <amelie.delaunay@xxxxxxxxxxx>
• [PATCH 05/11] dmaengine: stm32-dma3: prevent LL refactoring thanks to DT configuration
  • From: Amelie Delaunay <amelie.delaunay@xxxxxxxxxxx>
• [PATCH 04/11] dt-bindings: dma: stm32-dma3: prevent linked-list refactoring
  • From: Amelie Delaunay <amelie.delaunay@xxxxxxxxxxx>
• [PATCH 03/11] dmaengine: stm32-dma3: refactor HW linked-list to optimize memory accesses
  • From: Amelie Delaunay <amelie.delaunay@xxxxxxxxxxx>
• [PATCH 01/11] dt-bindings: dma: stm32-dma3: prevent packing/unpacking mode
  • From: Amelie Delaunay <amelie.delaunay@xxxxxxxxxxx>
• [PATCH 02/11] dmaengine: stm32-dma3: prevent pack/unpack thanks to DT configuration
  • From: Amelie Delaunay <amelie.delaunay@xxxxxxxxxxx>
• [PATCH 06/11] dt-bindings: dma: stm32-dma3: introduce st,axi-max-burst-len property
  • From: Amelie Delaunay <amelie.delaunay@xxxxxxxxxxx>
• [PATCH 07/11] dmaengine: stm32-dma3: clamp AXI burst using st,axi-max-burst-len
  • From: Amelie Delaunay <amelie.delaunay@xxxxxxxxxxx>
• [PATCH 08/11] arm64: dts: st: limit axi burst length in dma nodes of stm32mp25
  • From: Amelie Delaunay <amelie.delaunay@xxxxxxxxxxx>
• [PATCH 10/11] arm64: dts: st: add DMA support on I2C instances of stm32mp25
  • From: Amelie Delaunay <amelie.delaunay@xxxxxxxxxxx>
• [PATCH 09/11] arm64: dts: st: add DMA support on U(S)ART instances of stm32mp25
  • From: Amelie Delaunay <amelie.delaunay@xxxxxxxxxxx>
• [PATCH 00/11] STM32 DMA3 updates for STM32MP25
  • From: Amelie Delaunay <amelie.delaunay@xxxxxxxxxxx>
• Re: [PATCH v2 0/4] ARM: dts: omap: omap4-epson-embt2ws: misc gpio definitions
  • From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
• Re: [PATCH v8 0/9] Add support for sam9x7 SoC family
  • From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
• Re: [PATCH v5 1/2] dt-bindings: arm: aspeed: add IBM SBP1 board
  • From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
• Re: [PATCH v1] arm64: dts: qcom: qcm6490-idp: enable Bluetooth
  • From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
• Re: [PATCH v2 0/2] Add support for Zyxel EX3510-B
  • From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
• Re: [PATCH 1/2] arm64: dts: qcom: Add support for usb nodes on QCS8300
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [RFC PATCH net-next 4/5] net: macb: Configure High Speed Mac for given speed.
  • From: "Russell King (Oracle)" <linux@xxxxxxxxxxxxxxx>
• Re: [PATCH v2] arm64: dts: qcom: x1e80100: enable GICv3 ITS for PCIe
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH net-next 05/11] net: enetc: add enetc-pf-common driver support
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v2] arm64: dts: qcom: x1e80100: enable GICv3 ITS for PCIe
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH 1/1] dt-bindings: watchdog: rockchip: Add rockchip,rv1126-wdt string
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH 0/1] Add RV1126 compatible watchdog string
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [RFC PATCH net-next 4/5] net: macb: Configure High Speed Mac for given speed.
  • From: "Karumanchi, Vineeth" <vineeth@xxxxxxx>
• [PATCH v4 2/4] leds: bcm63138: Use scopes and guards
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH v4 4/4] leds: bcm63138: Add some register defines
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH v4 3/4] leds: bcm63138: Handle shift register config
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH v4 0/4] leds: bcm63138: Add some new bindings and code
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH v4 1/4] dt-bindings: leds: bcm63138: Add shift register bits
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: (subset) [PATCH v3 0/9] ASoC: Some issues about loongson i2s
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v2] arm64: dts: qcom: x1e80100: enable GICv3 ITS for PCIe
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH 1/1] dt-bindings: watchdog: rockchip: Add rockchip,rv1126-wdt string
  • From: Heiko Stübner <heiko@xxxxxxxxx>
• [PATCH v4 2/2] Input: add Himax HX852x(ES) touchscreen driver
  • From: Stephan Gerhold <stephan@xxxxxxxxxxx>
• Re: [PATCH 4/4] phy: qcom: qmp: Add qmp configuration for QCS8300
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v2] arm64: dts: qcom: x1e80100: enable GICv3 ITS for PCIe
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH] arm64: dts: renesas: hihope: Drop #sound-dai-cells
  • From: Prabhakar <prabhakar.csengg@xxxxxxxxx>
• Re: [RFC PATCH net-next 4/5] net: macb: Configure High Speed Mac for given speed.
  • From: "Karumanchi, Vineeth" <vineeth@xxxxxxx>
• Re: [PATCH v5 6/7] PCI: qcom: Fix the ops for X1E80100 and SC8280X family SoC
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v5 10/10] iio: dac: adi-axi-dac: add registering of child fdt node
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• [PATCH v4 1/2] dt-bindings: input: touchscreen: document Himax HX852x(ES)
  • From: Stephan Gerhold <stephan@xxxxxxxxxxx>
• [PATCH v4 0/2] Input: add Himax HX852x(ES) touchscreen driver
  • From: Stephan Gerhold <stephan@xxxxxxxxxxx>
• Re: [PATCH v3 4/4] leds: bcm63138: Add some register defines
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH v14 2/3] i2c: aspeed: support AST2600 i2c new register mode driver
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v6 2/2] clk: mediatek: Add drivers for MediaTek MT6735 main clock and reset drivers
  • From: Yassine Oudjana <yassine.oudjana@xxxxxxxxx>
• [PATCH v6 1/2] dt-bindings: clock: Add MediaTek MT6735 clock and reset bindings
  • From: Yassine Oudjana <yassine.oudjana@xxxxxxxxx>
• [PATCH v6 0/2] MediaTek MT6735 main clock and reset drivers
  • From: Yassine Oudjana <yassine.oudjana@xxxxxxxxx>
• Re: [PATCH v5 06/10] iio: dac: adi-axi-dac: extend features
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH v5 2/2] clk: mediatek: Add drivers for MediaTek MT6735 main clock and reset drivers
  • From: Yassine Oudjana <yassine.oudjana@xxxxxxxxx>
• Re: [PATCH v2 1/2] clk: imx93: Move IMX93_CLK_END macro to clk driver
  • From: Pengfei Li <pengfei.li_1@xxxxxxx>
• Re: [PATCH v5 05/10] iio: backend: extend features
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH v5 2/2] clk: mediatek: Add drivers for MediaTek MT6735 main clock and reset drivers
  • From: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
• Re: [PATCH v5 1/2] dt-bindings: clock: Add MediaTek MT6735 clock and reset bindings
  • From: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
• [no subject]
  • From: Unknown
• [PATCH v3 3/3] clk: imx: add i.MX91 clk
  • From: Pengfei Li <pengfei.li_1@xxxxxxx>
• Re: [PATCH v2 2/2] pinctrl: qcom: add the tlmm driver for QCS8300 platforms
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v3 2/3] dt-bindings: clock: Add i.MX91 clock definition
  • From: Pengfei Li <pengfei.li_1@xxxxxxx>
• [PATCH v3 1/3] dt-bindings: clock: Add i.MX91 clock support
  • From: Pengfei Li <pengfei.li_1@xxxxxxx>
• [PATCH v3 0/3] Add iMX91 clock driver support
  • From: Pengfei Li <pengfei.li_1@xxxxxxx>
• [PATCH net-next v2 5/5] net: phy: intel-xway: add support for PHY LEDs
  • From: Daniel Golle <daniel@xxxxxxxxxxxxxx>
• [PATCH net-next v2 4/5] net: phy: mxl-gpy: correctly describe LED polarity
  • From: Daniel Golle <daniel@xxxxxxxxxxxxxx>
• [PATCH net-next v2 3/5] net: phy: aquantia: correctly describe LED polarity override
  • From: Daniel Golle <daniel@xxxxxxxxxxxxxx>
• Re: [PATCH v5 02/10] iio: dac: adi-axi-dac: update register names
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• [PATCH net-next v2 2/5] net: phy: support 'active-high' property for PHY LEDs
  • From: Daniel Golle <daniel@xxxxxxxxxxxxxx>
• [PATCH net-next v2 1/5] dt-bindings: leds: add 'active-high' property
  • From: Daniel Golle <daniel@xxxxxxxxxxxxxx>
• Re: [PATCH v1 04/10] media: platform: mediatek: add isp_7x cam-raw unit
  • From: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
• [PATCH v5 2/2] clk: mediatek: Add drivers for MediaTek MT6735 main clock and reset drivers
  • From: Yassine Oudjana <yassine.oudjana@xxxxxxxxx>
• [PATCH v5 1/2] dt-bindings: clock: Add MediaTek MT6735 clock and reset bindings
  • From: Yassine Oudjana <yassine.oudjana@xxxxxxxxx>
• [PATCH v5 0/2] MediaTek MT6735 main clock and reset drivers
  • From: Yassine Oudjana <yassine.oudjana@xxxxxxxxx>
• Re: [PATCH v1] arm64: dts: qcom: qcm6490-idp: enable Bluetooth
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v2] arm64: dts: qcom: qcs6490-rb3gen2: enable Bluetooth
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v4 4/4] arm64: dts: mediatek: mt7988: add pinctrl support
  • From: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
• [PATCH v6 4/4] media: ov08x40: Add OF probe support
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• [PATCH v6 3/4] media: ov08x40: Rename ext_clk to xvclk
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• [PATCH v6 2/4] media: dt-bindings: Add OmniVision OV08X40
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• [PATCH v6 1/4] media: ov08x40: Fix burst write sequence
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• [PATCH v6 0/4] ov08x40: Enable use of ov08x40 on Qualcomm X1E80100 CRD
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• [PATCH v2 2/4] ARM: dts: omap: omap4-epson-embt2ws: wire up regulators
  • From: Andreas Kemnade <andreas@xxxxxxxxxxxx>
• [PATCH v2 0/4] ARM: dts: omap: omap4-epson-embt2ws: misc gpio definitions
  • From: Andreas Kemnade <andreas@xxxxxxxxxxxx>
• [PATCH v2 1/4] ARM: dts: omap: omap4-epson-embt2ws: define GPIO regulators
  • From: Andreas Kemnade <andreas@xxxxxxxxxxxx>
• [PATCH v2 3/4] ARM: dts: omap: omap4-epson-embt2ws: add unknown gpio outputs
  • From: Andreas Kemnade <andreas@xxxxxxxxxxxx>
• [PATCH v2 4/4] ARM: dts: omap: omap4-epson-embt2ws: add GPIO expander
  • From: Andreas Kemnade <andreas@xxxxxxxxxxxx>
• Re: [PATCH v4 2/4] pinctrl: mediatek: add MT7988 pinctrl driver
  • From: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
• Re: [PATCH v3 3/3] dt-bindings: mmc: mtk-sd: Add support for MT8196
  • From: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
• Re: [PATCH v3 2/3] mmc: mtk-sd: Add two settings in platdata
  • From: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
• Re: [PATCH v3 1/3] mmc: mtk-sd: Add support for MT8196
  • From: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
• Re: [PATCH V4 4/5] soc: qcom: Introduce SCMI based Memlat (Memory Latency) governor
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: (subset) [PATCH v3 0/9] ASoC: Some issues about loongson i2s
  • From: Binbin Zhou <zhoubb.aaron@xxxxxxxxx>
• [PATCH v8 5/9] dt-bindings: reset: atmel,at91sam9260-reset: add sam9x7
  • From: Varshini Rajendran <varshini.rajendran@xxxxxxxxxxxxx>
• [PATCH v8 6/9] dt-bindings: power: reset: atmel,sama5d2-shdwc: add sam9x7
  • From: Varshini Rajendran <varshini.rajendran@xxxxxxxxxxxxx>
• [PATCH v8 9/9] ARM: dts: microchip: sam9x75_curiosity: add sam9x75 curiosity board
  • From: Varshini Rajendran <varshini.rajendran@xxxxxxxxxxxxx>
• [PATCH v8 7/9] ARM: dts: at91: sam9x7: add device tree for SoC
  • From: Varshini Rajendran <varshini.rajendran@xxxxxxxxxxxxx>
• [PATCH v8 8/9] dt-bindings: arm: add sam9x75 curiosity board
  • From: Varshini Rajendran <varshini.rajendran@xxxxxxxxxxxxx>
• [PATCH v8 1/9] dt-bindings: atmel-ssc: add microchip,sam9x7-ssc
  • From: Varshini Rajendran <varshini.rajendran@xxxxxxxxxxxxx>
• [PATCH v8 0/9] Add support for sam9x7 SoC family
  • From: Varshini Rajendran <varshini.rajendran@xxxxxxxxxxxxx>
• Re: [PATCH v2 1/3] dt-bindings: watchdog: Document ExynosAutoV920 watchdog bindings
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v2 0/3] ARM: dts: ti: omap: fix dtbs_check warnings for ti,gpmc-nand and ti,gpmc-onenend
  • From: Roger Quadros <rogerq@xxxxxxxxxx>
• [PATCH v5 2/2] ARM: dts: aspeed: sbp1: IBM sbp1 BMC board
  • From: Naresh Solanki <naresh.solanki@xxxxxxxxxxxxx>
• [PATCH v5 1/2] dt-bindings: arm: aspeed: add IBM SBP1 board
  • From: Naresh Solanki <naresh.solanki@xxxxxxxxxxxxx>
• [PATCH v2 2/3] watchdog: s3c2410_wdt: add support for exynosautov920 SoC
  • From: Taewan Kim <trunixs.kim@xxxxxxxxxxx>
• [PATCH v2 3/3] arm64: dts: exynosautov920: add watchdog DT node
  • From: Taewan Kim <trunixs.kim@xxxxxxxxxxx>
• [PATCH v2 1/3] dt-bindings: watchdog: Document ExynosAutoV920 watchdog bindings
  • From: Taewan Kim <trunixs.kim@xxxxxxxxxxx>
• [PATCH v2 0/3] support watchdog for exynosautov920
  • From: Taewan Kim <trunixs.kim@xxxxxxxxxxx>
• Re: (subset) [PATCH v3 0/9] ASoC: Some issues about loongson i2s
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH] of: Skip kunit tests when arm64+ACPI doesn't populate root node
  • From: Mark Rutland <mark.rutland@xxxxxxx>
• [PATCH v1] arm64: dts: qcom: qcm6490-idp: enable Bluetooth
  • From: Janaki Ramaiah Thota <quic_janathot@xxxxxxxxxxx>
• RE: [PATCH v2 0/2] clk: imx93: Move IMX93_CLK_END macro to clk driver
  • From: Peng Fan <peng.fan@xxxxxxx>
• [PATCH v2] arm64: dts: qcom: qcs6490-rb3gen2: enable Bluetooth
  • From: Janaki Ramaiah Thota <quic_janathot@xxxxxxxxxxx>
• Re: [PATCH v3 12/12] PCI: rockchip-ep: Handle PERST# signal in endpoint mode
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• Re: [PATCH v5 3/5] mfd: airoha: Add support for Airoha EN7581 MFD
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• Re: [PATCH v3 01/12] PCI: rockchip-ep: Fix address translation unit programming
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• Re: [PATCH v3 10/12] PCI: rockchip-ep: Improve link training
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• RE: [PATCH v2 6/7] arm64: dts: freescale: imx95-19x19-evk: add nxp,ctrl-ids property
  • From: Peng Fan <peng.fan@xxxxxxx>
• RE: [PATCH v2 1/7] arm64: dts: freescale: imx95: set max-rx-timeout-ms
  • From: Peng Fan <peng.fan@xxxxxxx>
• [PATCH] arm64: dts: rockchip: Prevent thermal runaways in RK3308 SoC dtsi
  • From: Dragan Simic <dsimic@xxxxxxxxxxx>
• Re: [PATCH 4/5] arm64: dts: qcom: move common parts for qcs8300-ride variants into a .dtsi
  • From: Yijie Yang <quic_yijiyang@xxxxxxxxxxx>
• Re: [PATCH v5 3/5] mfd: airoha: Add support for Airoha EN7581 MFD
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [PATCH v3] arm64: dts: ti: k3-j721e-evm: Add overlay for PCIE1 Endpoint Mode
  • From: Siddharth Vadapalli <s-vadapalli@xxxxxx>
• [PATCH v2 2/3] soc: qcom: llcc: Add LLCC configuration for the QCS8300 platform
  • From: Jingyi Wang <quic_jingyw@xxxxxxxxxxx>
• [PATCH v2 3/3] arm64: dts: qcom: qcs8300: Add LLCC support for QCS8300
  • From: Jingyi Wang <quic_jingyw@xxxxxxxxxxx>
• [PATCH v2 1/3] dt-bindings: cache: qcom,llcc: Document the QCS8300 LLCC
  • From: Jingyi Wang <quic_jingyw@xxxxxxxxxxx>
• [PATCH v2 0/3] soc: qcom: llcc: Add LLCC support for the QCS8300 platform
  • From: Jingyi Wang <quic_jingyw@xxxxxxxxxxx>
• Re: [PATCH v3 01/12] dt-bindings: clock: renesas,r9a08g045-vbattb: Document VBATTB
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH v3 04/12] clk: renesas: clk-vbattb: Add VBATTB clock driver
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH v3 03/12] clk: linux/clk-provider.h: Add devm_clk_hw_register_gate_parent_hw()
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH v3 01/12] dt-bindings: clock: renesas,r9a08g045-vbattb: Document VBATTB
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• [no subject]
  • From: Unknown
• Re: [PATCH net-next v3 3/3] net: emaclite: Adopt clock support
  • From: Simon Horman <horms@xxxxxxxxxx>
• Re: [PATCH v3 02/12] dt-bindings: clock: r9a08g045-vbattb: Add clock IDs for the VBATTB controller
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH net-next v3 2/3] net: emaclite: Replace alloc_etherdev() with devm_alloc_etherdev()
  • From: Simon Horman <horms@xxxxxxxxxx>
• Re: [PATCH net-next v3 3/3] net: emaclite: Adopt clock support
  • From: Simon Horman <horms@xxxxxxxxxx>
• Re: [PATCH v3 05/12] dt-bindings: rtc: renesas,rzg3s-rtc: Document the Renesas RTCA-3 IP
  • From: claudiu beznea <claudiu.beznea@xxxxxxxxx>
• Re: [PATCH v1 0/2] Add Qualcomm extended CTI support
  • From: Jinlong Mao <quic_jinlmao@xxxxxxxxxxx>
• Re: [PATCH v4 1/4] pinctrl: mediatek: add support for MTK_PULL_PD_TYPE
  • From: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
• Re: [PATCH v2 0/3] ARM: dts: ti: omap: fix dtbs_check warnings for ti,gpmc-nand and ti,gpmc-onenend
  • From: Andreas Kemnade <andreas@xxxxxxxxxxxx>
• Re: [PATCH v4 RESEND 2/3] coresight: Add support to get static id for system trace sources
  • From: Jinlong Mao <quic_jinlmao@xxxxxxxxxxx>
• Re: [PATCH 3/3] arm64: dts: qcom: x1e80100-qcp: Add WiFi/BT pwrseq
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH v5 1/4] dt-bindings: imx6q-pcie: Add reg-name "dbi2" and "atu" for i.MX8M PCIe Endpoint
  • From: Niklas Cassel <cassel@xxxxxxxxxx>
• Re: [PATCH 2/3] arm64: dts: qcom: x1e80100: Add uart14
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH 1/3] arm64: dts: qcom: x1e80100: Add QUP power domains and OPPs
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH v3 05/12] dt-bindings: rtc: renesas,rzg3s-rtc: Document the Renesas RTCA-3 IP
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH v4 RESEND 2/3] coresight: Add support to get static id for system trace sources
  • From: Suzuki K Poulose <suzuki.poulose@xxxxxxx>
• [PATCH v7 2/3] arm64: dts: imx95: add usb3 related nodes
  • From: Xu Yang <xu.yang_2@xxxxxxx>
• [PATCH v7 3/3] arm64: dts: imx95-19x19-evk: add typec nodes and enable usb3 node
  • From: Xu Yang <xu.yang_2@xxxxxxx>
• [PATCH v7 1/3] phy: fsl-imx8mq-usb: add tca function driver for imx95
  • From: Xu Yang <xu.yang_2@xxxxxxx>
• Re: [PATCH v3] arm64: dts: qcom: x1e80100: Fix PCIe 6a lanes description
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH v3] arm64: dts: qcom: x1e80100-t14s: add another trackpad support
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: (subset) [PATCH v3 3/3] arm64: dts: exynosautov920: add peric1, misc and hsi0/1 clock DT nodes
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: (subset) [PATCH v3 2/3] clk: samsung: exynosautov920: add peric1, misc and hsi0/1 clock support
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: (subset) [PATCH v3 1/3] dt-bindings: clock: exynosautov920: add peric1, misc and hsi0/1 clock definitions
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v2 5/5] arm64: dts: qcom: sc8280xp: Add Microsoft Surface Pro 9 5G
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH v2] dt-bindings: leds: Document "rc-feedback" trigger
  • From: Heiko Stübner <heiko@xxxxxxxxx>
• Re: [PATCH v3 01/12] PCI: rockchip-ep: Fix address translation unit programming
  • From: Damien Le Moal <dlemoal@xxxxxxxxxx>
• Re: (subset) [PATCH v2] dt-bindings: leds: Document "rc-feedback" trigger
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH v3 07/12] PCI: rockchip-ep: Refactor rockchip_pcie_ep_probe() MSI-X hiding
  • From: Damien Le Moal <dlemoal@xxxxxxxxxx>
• Re: [PATCH v2] dt-bindings: leds: Document "rc-feedback" trigger
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH 1/6] dt-bindings: remoteproc: qcom,pas-common: Introduce iommus and qcom,devmem property
  • From: Shiraz Hashim <quic_shashim@xxxxxxxxxxx>
• [PATCH v6 2/2] pwm: Add Loongson PWM controller support
  • From: Binbin Zhou <zhoubinbin@xxxxxxxxxxx>
• [PATCH v6 0/2] pwm: Introduce pwm driver for the Loongson family chips
  • From: Binbin Zhou <zhoubinbin@xxxxxxxxxxx>
• [PATCH v6 1/2] dt-bindings: pwm: Add Loongson PWM controller
  • From: Binbin Zhou <zhoubinbin@xxxxxxxxxxx>
• Re: [PATCH v3 09/12] PCI: rockship-ep: Introduce rockchip_pcie_ep_stop()
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: serial: snps-dw-apb-uart: Add Sophgo SG2044 uarts
  • From: Inochi Amaoto <inochiama@xxxxxxxxx>
• Re: [PATCH v3 08/12] PCI: rockchip-ep: Refactor endpoint link training enable
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• Re: [PATCH v9 1/3] drm/bridge: synopsys: Add DW HDMI QP TX Controller support library
  • From: "Maxime Ripard" <mripard@xxxxxxxxxx>
• [PATCH v8 2/2] ARM: dts: mxs: Add descriptions for imx287 based btt3-[012] devices
  • From: Lukasz Majewski <lukma@xxxxxxx>
• Re: [PATCH v7 1/3] drm/mipi-dsi: add mipi_dsi_compression_mode_multi
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• [PATCH v8 1/2] dt-bindings: arm: Document the btt3 i.MX28 based board
  • From: Lukasz Majewski <lukma@xxxxxxx>
• Re: [PATCH v3 07/12] PCI: rockchip-ep: Refactor rockchip_pcie_ep_probe() MSI-X hiding
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• Re: [PATCH net-next 1/4] dt-bindings: leds: add 'active-high' property
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: cache: qcom,llcc: Document the QCS615 LLCC
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• RE: [PATCH 2/3] watchdog: s3c2410_wdt: add support for exynosautov920 SoC
  • From: "Alim Akhtar" <alim.akhtar@xxxxxxxxxxx>
• [PATCH v2 5/7] coresight-tgu: add support to configure next action
  • From: Songwei Chai <quic_songchai@xxxxxxxxxxx>
• [PATCH v2 7/7] coresight-tgu: add reset node to initialize
  • From: Songwei Chai <quic_songchai@xxxxxxxxxxx>
• [PATCH v2 4/7] coresight-tgu: Add TGU decode support
  • From: Songwei Chai <quic_songchai@xxxxxxxxxxx>
• [PATCH v2 2/7] coresight: Add coresight TGU driver
  • From: Songwei Chai <quic_songchai@xxxxxxxxxxx>
• [PATCH v2 3/7] coresight-tgu: Add signal priority support
  • From: Songwei Chai <quic_songchai@xxxxxxxxxxx>
• [PATCH v2 6/7] coresight-tgu: add timer/counter functionality for TGU
  • From: Songwei Chai <quic_songchai@xxxxxxxxxxx>
• [PATCH v2 1/7] dt-bindings: arm: Add support for Coresight TGU trace
  • From: Songwei Chai <quic_songchai@xxxxxxxxxxx>
• [PATCH v2 0/7] Provides support for Trigger Generation Unit
  • From: Songwei Chai <quic_songchai@xxxxxxxxxxx>
• RE: [PATCH 3/3] arm64: dts: exynosautov920: add watchdog DT node
  • From: 김태완 <trunixs.kim@xxxxxxxxxxx>
• RE: [PATCH 2/3] watchdog: s3c2410_wdt: add support for exynosautov920 SoC
  • From: 김태완 <trunixs.kim@xxxxxxxxxxx>
• Re: [PATCH v3 07/12] PCI: rockchip-ep: Refactor rockchip_pcie_ep_probe() MSI-X hiding
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• Re: [PATCH v3 06/12] PCI: rockchip-ep: Refactor rockchip_pcie_ep_probe() memory allocations
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• [PATCH v3 3/3] arm64: dts: qcom: sm8250-xiaomi-elish: Add bluetooth node
  • From: Jianhua Lu <lujianhua000@xxxxxxxxx>
• [PATCH v3 2/3] arm64: dts: qcom: sm8250-xiaomi-elish: Add wifi node
  • From: Jianhua Lu <lujianhua000@xxxxxxxxx>
• [PATCH v3 1/3] arm64: dts: qcom: sm8250-xiaomi-elish: Add qca6390-pmu node
  • From: Jianhua Lu <lujianhua000@xxxxxxxxx>
• RE: [PATCH 2/3] watchdog: s3c2410_wdt: add support for exynosautov920 SoC
  • From: 김태완 <trunixs.kim@xxxxxxxxxxx>
• Re: [PATCH 1/6] dt-bindings: remoteproc: qcom,pas-common: Introduce iommus and qcom,devmem property
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v3 04/12] PCI: rockchip-ep: Improve rockchip_pcie_ep_map_addr()
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• Re: [PATCH v3 03/12] PCI: rockchip-ep: Improve rockchip_pcie_ep_unmap_addr()
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• [PATCH v11 8/8] arm64: dts: qcom: ipq9574: Disable eMMC node
  • From: Md Sadre Alam <quic_mdalam@xxxxxxxxxxx>
• [PATCH v11 4/8] mtd: nand: Add qpic_common API file
  • From: Md Sadre Alam <quic_mdalam@xxxxxxxxxxx>
• [PATCH v11 6/8] spi: spi-qpic: add driver for QCOM SPI NAND flash Interface
  • From: Md Sadre Alam <quic_mdalam@xxxxxxxxxxx>
• [PATCH v11 7/8] arm64: dts: qcom: ipq9574: Add SPI nand support
  • From: Md Sadre Alam <quic_mdalam@xxxxxxxxxxx>
• [PATCH v11 5/8] mtd: rawnand: qcom: use FIELD_PREP and GENMASK
  • From: Md Sadre Alam <quic_mdalam@xxxxxxxxxxx>
• [PATCH v11 3/8] mtd: rawnand: qcom: Add qcom prefix to common api
  • From: Md Sadre Alam <quic_mdalam@xxxxxxxxxxx>
• [PATCH v11 1/8] spi: dt-bindings: Introduce qcom,spi-qpic-snand
  • From: Md Sadre Alam <quic_mdalam@xxxxxxxxxxx>
• [PATCH v11 2/8] mtd: rawnand: qcom: cleanup qcom_nandc driver
  • From: Md Sadre Alam <quic_mdalam@xxxxxxxxxxx>
• Re: [PATCH v3 02/12] PCI: rockchip-ep: Use a macro to define EP controller .align feature
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• Re: [PATCH v3 01/12] PCI: rockchip-ep: Fix address translation unit programming
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• [PATCH v11 0/8] Add QPIC SPI NAND driver
  • From: Md Sadre Alam <quic_mdalam@xxxxxxxxxxx>
• Re: [PATCH 3/6] remoteproc: qcom: Add helper function to support IOMMU devmem translation
  • From: neil.armstrong@xxxxxxxxxx
• Re: [PATCH 6/6] remoteproc: qcom: Enable map/unmap and SHM bridge support
  • From: neil.armstrong@xxxxxxxxxx
• Re: [PATCH 1/5] dt-bindings: arm: qcom: add qcs8300-ride Rev 2
  • From: Yijie Yang <quic_yijiyang@xxxxxxxxxxx>
• [PATCH v2 0/2] soc: qcom: llcc: Add LLCC support for the QCS615 platform
  • From: Song Xue <quic_songxue@xxxxxxxxxxx>
• [PATCH v2 2/2] soc: qcom: llcc: Add configuration data for QCS615
  • From: Song Xue <quic_songxue@xxxxxxxxxxx>
• [PATCH v2 1/2] dt-bindings: cache: qcom,llcc: Document the QCS615 LLCC
  • From: Song Xue <quic_songxue@xxxxxxxxxxx>
• [PATCH v9 6/6] reset: mchp: sparx5: set the dev member of the reset controller
  • From: Herve Codina <herve.codina@xxxxxxxxxxx>
• [PATCH v9 5/6] reset: mchp: sparx5: Allow building as a module
  • From: Herve Codina <herve.codina@xxxxxxxxxxx>
• [PATCH v9 4/6] reset: mchp: sparx5: Add MCHP_LAN966X_PCI dependency
  • From: Herve Codina <herve.codina@xxxxxxxxxxx>
• [PATCH v9 3/6] reset: mchp: sparx5: Map cpu-syscon locally in case of LAN966x
  • From: Herve Codina <herve.codina@xxxxxxxxxxx>
• [PATCH v9 2/6] MAINTAINERS: Add the Microchip LAN966x PCI driver entry
  • From: Herve Codina <herve.codina@xxxxxxxxxxx>
• [PATCH v9 1/6] misc: Add support for LAN966x PCI device
  • From: Herve Codina <herve.codina@xxxxxxxxxxx>
• [PATCH v9 0/6] Add support for the LAN966x PCI device using a DT overlay
  • From: Herve Codina <herve.codina@xxxxxxxxxxx>
• [PATCH v5 net-next 2/2] net: phy: c45-tja11xx: add support for outputting RMII reference clock
  • From: Wei Fang <wei.fang@xxxxxxx>
• [PATCH v5 net-next 1/2] dt-bindings: net: tja11xx: add "nxp,rmii-refclk-out" property
  • From: Wei Fang <wei.fang@xxxxxxx>
• [PATCH v5 net-next 0/2] make PHY output RMII reference clock
  • From: Wei Fang <wei.fang@xxxxxxx>
• Re: [PATCH v7 4/6] clk: qcom: Add NSS clock Controller driver for IPQ9574
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v8 0/6] Add support for the LAN966x PCI device using a DT overlay
  • From: Herve Codina <herve.codina@xxxxxxxxxxx>
• Re: [PATCH 4/5] arm64: dts: qcom: move common parts for qcs8300-ride variants into a .dtsi
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH 1/5] dt-bindings: arm: qcom: add qcs8300-ride Rev 2
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH v8 6/6] reset: mchp: sparx5: set the dev member of the reset controller
  • From: Herve Codina <herve.codina@xxxxxxxxxxx>
• [PATCH v8 5/6] reset: mchp: sparx5: Allow building as a module
  • From: Herve Codina <herve.codina@xxxxxxxxxxx>
• [PATCH v8 4/6] reset: mchp: sparx5: Add MCHP_LAN966X_PCI dependency
  • From: Herve Codina <herve.codina@xxxxxxxxxxx>
• [PATCH v8 3/6] reset: mchp: sparx5: Map cpu-syscon locally in case of LAN966x
  • From: Herve Codina <herve.codina@xxxxxxxxxxx>
• [PATCH v8 2/6] MAINTAINERS: Add the Microchip LAN966x PCI driver entry
  • From: Herve Codina <herve.codina@xxxxxxxxxxx>
• [PATCH v8 1/6] misc: Add support for LAN966x PCI device
  • From: Herve Codina <herve.codina@xxxxxxxxxxx>
• [PATCH v8 0/6] Add support for the LAN966x PCI device using a DT overlay
  • From: Herve Codina <herve.codina@xxxxxxxxxxx>
• Re: [PATCH 3/3] dt-bindings: net: qcom,ethqos: add description for qcs8300
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH 1/3] dt-bindings: net: qcom,ethqos: add description for qcs615
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH 0/1] Add RV1126 compatible watchdog string
  • From: Karthikeyan Krishnasamy <karthikeyan@xxxxxxxxxxx>
• [PATCH 1/1] dt-bindings: watchdog: rockchip: Add rockchip,rv1126-wdt string
  • From: Karthikeyan Krishnasamy <karthikeyan@xxxxxxxxxxx>
• Re: [PATCH 2/3] dt-bindings: phy: describe the Qualcomm SGMII PHY
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: serial: snps-dw-apb-uart: Add Sophgo SG2044 uarts
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: examples: Add GPIO hogs and variable-lists
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• RE: [PATCH net-next 10/11] net: enetc: add preliminary support for i.MX95 ENETC PF
  • From: Wei Fang <wei.fang@xxxxxxx>
• Re: [PATCHv3 5/5] documentation: use nvmem-layout in examples
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v3 12/12] PCI: rockchip-ep: Handle PERST# signal in endpoint mode
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v3 5/5] scsi: ufs: rockchip: initial support for UFS
  • From: Shawn Lin <shawn.lin@xxxxxxxxxxxxxx>
• Re: [PATCH v3] of: Fix unbalanced of node refcount and memory leaks
  • From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
• [PATCH v3] of: Fix unbalanced of node refcount and memory leaks
  • From: Jinjie Ruan <ruanjinjie@xxxxxxxxxx>
• Re: [PATCH v3 05/12] PCI: rockchip-ep: Implement the .map_align() controller operation
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH RFC v2 2/2] dt-bindings: clock: ti: Convert divider.txt to json-schema
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH] of: Skip kunit tests when arm64+ACPI doesn't populate root node
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH 1/3] dt-bindings: mtd: Relax BCM4908 partition schema
  • From: Sam Edwards <cfsworks@xxxxxxxxx>
• Re: [PATCH RFC v2 2/2] dt-bindings: clock: ti: Convert divider.txt to json-schema
  • From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
• Re: [PATCH RFC v2 1/2] dt-bindings: clock: ti: Convert interface.txt to json-schema
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v8 1/1] pwm: imx27: workaround of the pwm output bug when decrease the duty cycle
  • From: Marek Vasut <marex@xxxxxxx>
• RE: [PATCH net-next 09/11] net: enetc: optimize the allocation of tx_bdr
  • From: Wei Fang <wei.fang@xxxxxxx>
• RE: [PATCH net-next 05/11] net: enetc: add enetc-pf-common driver support
  • From: Wei Fang <wei.fang@xxxxxxx>
• RE: [PATCH v5 3/3] clk: aspeed: add AST2700 clock driver.
  • From: Ryan Chen <ryan_chen@xxxxxxxxxxxxxx>
• [PATCH 2/2] arm64: dts: qcom: qcs615-ride: Enable ethernet node
  • From: Yijie Yang <quic_yijiyang@xxxxxxxxxxx>
• [PATCH 1/2] arm64: dts: qcom: qcs615: add ethernet node
  • From: Yijie Yang <quic_yijiyang@xxxxxxxxxxx>
• [PATCH 0/2] Enable ethernet on qcs615
  • From: Yijie Yang <quic_yijiyang@xxxxxxxxxxx>
• RE: [PATCH v3 4/4] arm64: dts: imx8ulp: correct the flexspi compatible string
  • From: Bough Chen <haibo.chen@xxxxxxx>
• [PATCH 5/5] arm64: dts: qcom: qcs8300-ride-r2: add new board file
  • From: Yijie Yang <quic_yijiyang@xxxxxxxxxxx>
• [PATCH 4/5] arm64: dts: qcom: move common parts for qcs8300-ride variants into a .dtsi
  • From: Yijie Yang <quic_yijiyang@xxxxxxxxxxx>
• [PATCH 1/5] dt-bindings: arm: qcom: add qcs8300-ride Rev 2
  • From: Yijie Yang <quic_yijiyang@xxxxxxxxxxx>
• [PATCH 0/5] Enable ethernet for qcs8300
  • From: Yijie Yang <quic_yijiyang@xxxxxxxxxxx>
• [PATCH 3/5] arm64: dts: qcom: qcs8300-ride: enable ethernet0
  • From: Yijie Yang <quic_yijiyang@xxxxxxxxxxx>
• [PATCH 2/5] arm64: dts: qcom: qcs8300: add the first 1Gb ethernet
  • From: Yijie Yang <quic_yijiyang@xxxxxxxxxxx>
• Re: [PATCH v2 04/14] dt-bindings: misc: Add device specific bindings for RaspberryPi RP1
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v2 03/14] dt-bindings: pci: Add common schema for devices accessible through PCI BARs
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v3 05/12] PCI: rockchip-ep: Implement the .map_align() controller operation
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH 1/3] dt-bindings: mtd: Relax BCM4908 partition schema
  • From: Rob Herring <robh@xxxxxxxxxx>
• RE: [PATCH net-next 04/11] net: enetc: add initial netc-blk-ctrl driver support
  • From: Wei Fang <wei.fang@xxxxxxx>
• RE: [PATCH v5 1/4] dt-bindings: imx6q-pcie: Add reg-name "dbi2" and "atu" for i.MX8M PCIe Endpoint
  • From: Hongxing Zhu <hongxing.zhu@xxxxxxx>
• RE: [PATCH v2 net-next 1/2] dt-bindings: net: tja11xx: add "nxp,rmii-refclk-out" property
  • From: Wei Fang <wei.fang@xxxxxxx>
• RE: [PATCH net-next 02/11] dt-bindings: net: add i.MX95 ENETC support
  • From: Wei Fang <wei.fang@xxxxxxx>
• RE: [PATCH net-next 03/11] dt-bindings: net: add bindings for NETC blocks control
  • From: Wei Fang <wei.fang@xxxxxxx>
• Re: [PATCH 1/3] dt-bindings: mtd: Relax BCM4908 partition schema
  • From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
• [PATCH 3/3] dt-bindings: net: qcom,ethqos: add description for qcs8300
  • From: Yijie Yang <quic_yijiyang@xxxxxxxxxxx>
• [PATCH 1/3] dt-bindings: net: qcom,ethqos: add description for qcs615
  • From: Yijie Yang <quic_yijiyang@xxxxxxxxxxx>
• [PATCH 2/3] dt-bindings: phy: describe the Qualcomm SGMII PHY
  • From: Yijie Yang <quic_yijiyang@xxxxxxxxxxx>
• [PATCH 0/3] Add ethernet dts schema for qcs615/qcs8300
  • From: Yijie Yang <quic_yijiyang@xxxxxxxxxxx>
• RE: [PATCH net-next 02/11] dt-bindings: net: add i.MX95 ENETC support
  • From: Wei Fang <wei.fang@xxxxxxx>
• RE: [PATCH net-next 01/11] dt-bindings: net: add compatible string for i.MX95 EMDIO
  • From: Wei Fang <wei.fang@xxxxxxx>
• Re: [PATCH v2 6/6] clk: clocking-wizard: move dynamic reconfig setup behind flag
  • From: Stephen Boyd <sboyd@xxxxxxxxxx>
• Re: [PATCH v2 5/6] dt-bindings: clock: xilinx: describe whether dynamic reconfig is enabled
  • From: Stephen Boyd <sboyd@xxxxxxxxxx>
• Re: [PATCH v2 4/6] clk: clocking-wizard: move clock registration to separate function
  • From: Stephen Boyd <sboyd@xxxxxxxxxx>
• Re: [PATCH v2 3/6] clk: clocking-wizard: use devres versions of clk_hw API
  • From: Stephen Boyd <sboyd@xxxxxxxxxx>
• Re: [PATCH v2 2/6] clk: clocking-wizard: use newer clk_hw API
  • From: Stephen Boyd <sboyd@xxxxxxxxxx>
• Re: [PATCH v2 1/6] clk: clocking-wizard: simplify probe/remove with devres helpers
  • From: Stephen Boyd <sboyd@xxxxxxxxxx>
• Re: [PATCH net-next 1/4] dt-bindings: leds: add 'active-high' property
  • From: Jakub Kicinski <kuba@xxxxxxxxxx>
• Re: [PATCH 3/3] perf vendor events arm64: Add i.MX91 DDR Performance Monitor metrics
  • From: Namhyung Kim <namhyung@xxxxxxxxxx>
• Re: [PATCH v6 11/33] riscv/mm : ensure PROT_WRITE leads to VM_READ | VM_WRITE
  • From: Deepak Gupta <debug@xxxxxxxxxxxx>
• [PATCH 2/2] serial: 8250_dw: Add Sophgo SG2044 quirk
  • From: Inochi Amaoto <inochiama@xxxxxxxxx>
• [PATCH 1/2] dt-bindings: serial: snps-dw-apb-uart: Add Sophgo SG2044 uarts
  • From: Inochi Amaoto <inochiama@xxxxxxxxx>
• [PATCH 0/2] serial: 8250_dw: Introduce SG2044 uart support.
  • From: Inochi Amaoto <inochiama@xxxxxxxxx>
• Re: [PATCH v2 0/7] clk: en7523: Update register mapping for EN7581
  • From: Stephen Boyd <sboyd@xxxxxxxxxx>
• [PATCH v3 3/3] arm64: dts: renesas: r9a09g057: Add ICU node
  • From: Fabrizio Castro <fabrizio.castro.jz@xxxxxxxxxxx>
• [PATCH v3 1/3] dt-bindings: interrupt-controller: Add Renesas RZ/V2H(P) Interrupt Controller
  • From: Fabrizio Castro <fabrizio.castro.jz@xxxxxxxxxxx>
• [PATCH v3 0/3] Add support for the RZ/V2H Interrupt Control Unit
  • From: Fabrizio Castro <fabrizio.castro.jz@xxxxxxxxxxx>
• Re: [PATCH v8 3/3] drm/rockchip: Add basic RK3588 HDMI output support
  • From: Cristian Ciocaltea <cristian.ciocaltea@xxxxxxxxxxxxx>
• Re: [PATCH v3 1/8] dt-bindings: spmi: spmi-mtk-pmif: Add compatible for MT8188
  • From: Stephen Boyd <sboyd@xxxxxxxxxx>
• Re: [PATCH v2 1/3] dt-bindings: interrupt-controller: Add Sophgo SG2044 ACLINT SSWI
  • From: Conor Dooley <conor@xxxxxxxxxx>
• [PATCH v2 3/3] riscv: defconfig: Enable T-HEAD C900 ACLINT SSWI drivers
  • From: Inochi Amaoto <inochiama@xxxxxxxxx>
• [PATCH v2 2/3] irqchip: add T-HEAD C900 ACLINT SSWI driver
  • From: Inochi Amaoto <inochiama@xxxxxxxxx>
• [PATCH v2 1/3] dt-bindings: interrupt-controller: Add Sophgo SG2044 ACLINT SSWI
  • From: Inochi Amaoto <inochiama@xxxxxxxxx>
• [PATCH v2 0/3] riscv: interrupt-controller: Add T-HEAD C900 ACLINT SSWI
  • From: Inochi Amaoto <inochiama@xxxxxxxxx>
• [PATCH v9 3/3] drm/rockchip: Add basic RK3588 HDMI output support
  • From: Cristian Ciocaltea <cristian.ciocaltea@xxxxxxxxxxxxx>
• [PATCH v9 1/3] drm/bridge: synopsys: Add DW HDMI QP TX Controller support library
  • From: Cristian Ciocaltea <cristian.ciocaltea@xxxxxxxxxxxxx>
• [PATCH v9 2/3] dt-bindings: display: rockchip: Add schema for RK3588 HDMI TX Controller
  • From: Cristian Ciocaltea <cristian.ciocaltea@xxxxxxxxxxxxx>
• [PATCH v9 0/3] Add initial support for the Rockchip RK3588 HDMI TX Controller
  • From: Cristian Ciocaltea <cristian.ciocaltea@xxxxxxxxxxxxx>
• Re: [PATCH v4 0/5] Display enablement changes for Qualcomm SA8775P platform
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [no subject]
  • From: Unknown
• Re: [PATCH v2] of: Fix unbalanced of node refcount and memory leaks
  • From: Stephen Boyd <sboyd@xxxxxxxxxx>
• Re: [RFC PATCH 1/2] dt-bindings: crypto: Add Mediatek EIP-93 crypto engine
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• RE: [PATCH v2 2/5] dt-bindings: interrupt-controller: Add Renesas RZ/V2H(P) Interrupt Controller
  • From: Fabrizio Castro <fabrizio.castro.jz@xxxxxxxxxxx>
• Re: [PATCH v2 08/14] clk: rp1: Add support for clocks provided by RP1
  • From: Stephen Boyd <sboyd@xxxxxxxxxx>
• [PATCH v2 2/2] arm64: dts: broadcom: bcmbca: bcm4908: Add DT for Zyxel EX3510-B
  • From: Sam Edwards <cfsworks@xxxxxxxxx>
• [PATCH v2 1/2] dt-bindings: arm64: bcmbca: Add Zyxel EX3510-B based on BCM4906
  • From: Sam Edwards <cfsworks@xxxxxxxxx>
• [PATCH v2 0/2] Add support for Zyxel EX3510-B
  • From: Sam Edwards <cfsworks@xxxxxxxxx>
• [PATCH 3/3] arm64: dts: broadcom: bcmbca: bcm4908: Fix Netgear R8000P partitioning
  • From: Sam Edwards <cfsworks@xxxxxxxxx>
• [PATCH 2/3] arm64: dts: broadcom: bcmbca: bcm4908: Fix Asus GT-AC5300's cferom partition
  • From: Sam Edwards <cfsworks@xxxxxxxxx>
• [PATCH 1/3] dt-bindings: mtd: Relax BCM4908 partition schema
  • From: Sam Edwards <cfsworks@xxxxxxxxx>
• [PATCH 0/3] Resolve BCMBCA DT validation errors
  • From: Sam Edwards <cfsworks@xxxxxxxxx>
• [PATCHv3 5/5] documentation: use nvmem-layout in examples
  • From: Rosen Penev <rosenp@xxxxxxxxx>
• [PATCHv3 4/5] arm64: dts: mediatek: 7886cax: use nvmem-layout
  • From: Rosen Penev <rosenp@xxxxxxxxx>
• [PATCHv3 3/5] arm64: dts: armada-3720-gl-mv1000: use nvmem-layout
  • From: Rosen Penev <rosenp@xxxxxxxxx>
• [PATCHv3 2/5] arm64: dts: bcm4908: nvmem-layout conversion
  • From: Rosen Penev <rosenp@xxxxxxxxx>
• [PATCHv3 1/5] ARM: dts: qcom: ipq4019: use nvmem-layout
  • From: Rosen Penev <rosenp@xxxxxxxxx>
• [PATCHv3 0/5] devicetree: move nvmem-cells users to nvmem-layout
  • From: Rosen Penev <rosenp@xxxxxxxxx>
• Re: [PATCH 3/4] dt-bindings: phy: qcom,sc8280xp-qmp-usb3-uni: Add QCS8300 compatible
  • From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
• Re: [PATCH 1/4] dt-bindings: usb: qcom,dwc3: Add QCS8300 to USB DWC3 bindings
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 2/4] dt-bindings: phy: qcom,usb-snps-femto-v2: Add bindings for QCS8300
  • From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
• Re: [RFC PATCH 1/2] dt-bindings: crypto: Add Mediatek EIP-93 crypto engine
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v4 3/4] dt-bindings: pinctrl: add binding for MT7988 SoC
  • From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
• Re: [PATCH v3 2/6] dt-bindings: i2c: nomadik: support 400kHz < clock-frequency <= 3.4MHz
  • From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
• Re: [PATCH v3 1/6] dt-bindings: i2c: nomadik: add mobileye,eyeq6h-i2c bindings
  • From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: imx-rng: Allow passing only "fsl,imx31-rnga"
  • From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
• Re: [PATCH v3 1/2] dt-bindings: interrupt-controller: Add support for ASPEED AST27XX INTC
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v1 01/10] dt-bindings: media: mediatek: add camsys device
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH RFC v2 1/2] dt-bindings: clock: ti: Convert interface.txt to json-schema
  • From: Andreas Kemnade <andreas@xxxxxxxxxxxx>
• [PATCH RFC v2 0/2] dt-bindings: clock: ti: convert to yaml
  • From: Andreas Kemnade <andreas@xxxxxxxxxxxx>
• [PATCH RFC v2 2/2] dt-bindings: clock: ti: Convert divider.txt to json-schema
  • From: Andreas Kemnade <andreas@xxxxxxxxxxxx>
• Re: [PATCH net-next 02/11] dt-bindings: net: add i.MX95 ENETC support
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH] of: Skip kunit tests when arm64+ACPI doesn't populate root node
  • From: Stephen Boyd <sboyd@xxxxxxxxxx>
• Re: [PATCH v5 3/7] dt-bindings: PCI: qcom,pcie-x1e80100: Add 'global' interrupt
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 2/2] media: dt-bindings: media: i2c: Add AR0233 camera sensor
  • From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
• Re: [PATCH v3 1/3] dt-bindings: clock: exynosautov920: add peric1, misc and hsi0/1 clock definitions
  • From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
• Re: [PATCH v3 5/5] scsi: ufs: rockchip: initial support for UFS
  • From: kernel test robot <lkp@xxxxxxxxx>
• [PATCH 2/2] arm64: dts: qcom: Enable USB controllers for QCS8300
  • From: Krishna Kurapati <quic_kriskura@xxxxxxxxxxx>
• [PATCH 1/2] arm64: dts: qcom: Add support for usb nodes on QCS8300
  • From: Krishna Kurapati <quic_kriskura@xxxxxxxxxxx>
• [PATCH 0/2] Add Devicetree support for USB controllers on QCS8300
  • From: Krishna Kurapati <quic_kriskura@xxxxxxxxxxx>
• [PATCH 4/4] phy: qcom: qmp: Add qmp configuration for QCS8300
  • From: Krishna Kurapati <quic_kriskura@xxxxxxxxxxx>
• [PATCH 3/4] dt-bindings: phy: qcom,sc8280xp-qmp-usb3-uni: Add QCS8300 compatible
  • From: Krishna Kurapati <quic_kriskura@xxxxxxxxxxx>
• [PATCH 2/4] dt-bindings: phy: qcom,usb-snps-femto-v2: Add bindings for QCS8300
  • From: Krishna Kurapati <quic_kriskura@xxxxxxxxxxx>
• [PATCH 1/4] dt-bindings: usb: qcom,dwc3: Add QCS8300 to USB DWC3 bindings
  • From: Krishna Kurapati <quic_kriskura@xxxxxxxxxxx>
• [PATCH 0/4] Add USB Support for QCS8300
  • From: Krishna Kurapati <quic_kriskura@xxxxxxxxxxx>
• Re: [PATCH v3 1/2] dt-bindings: mmc: mtk-sd: Add mt7988 SoC
  • From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
• Re: [PATCH v4 2/5] dt-bindings: display/msm: Document the DPU for SA8775P
  • From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
• Re: [PATCH 0/6] EDAC: fsl-ddr, add imx9 support
  • From: Borislav Petkov <bp@xxxxxxxxx>
• Re: [PATCH v8 8/8] clk: Add KUnit tests for clks registered with struct clk_parent_data
  • From: Stephen Boyd <sboyd@xxxxxxxxxx>
• Re: [PATCH 0/6] EDAC: fsl-ddr, add imx9 support
  • From: Frank Li <Frank.li@xxxxxxx>
• Re: [PATCH 1/3] dt-bindings: perf: fsl-imx-ddr: Add i.MX91 compatible
  • From: Frank Li <Frank.li@xxxxxxx>
• Re: [PATCH net-next 10/11] net: enetc: add preliminary support for i.MX95 ENETC PF
  • From: Frank Li <Frank.li@xxxxxxx>
• Re: [PATCH net-next 09/11] net: enetc: optimize the allocation of tx_bdr
  • From: Frank Li <Frank.li@xxxxxxx>
• Re: [PATCH net-next 05/11] net: enetc: add enetc-pf-common driver support
  • From: Frank Li <Frank.li@xxxxxxx>
• [RFC PATCH 2/2] crypto: Add Mediatek EIP-93 crypto engine support
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [RFC PATCH 1/2] dt-bindings: crypto: Add Mediatek EIP-93 crypto engine
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• Re: [PATCH 6/8] drm/bridge: Add ITE IT6263 LVDS to HDMI converter
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH net-next 04/11] net: enetc: add initial netc-blk-ctrl driver support
  • From: Frank Li <Frank.li@xxxxxxx>
• [PATCH v3 2/2] mmc: mtk-sd: add support for mt7988
  • From: Frank Wunderlich <linux@xxxxxxxxx>
• [PATCH v3 1/2] dt-bindings: mmc: mtk-sd: Add mt7988 SoC
  • From: Frank Wunderlich <linux@xxxxxxxxx>
• [PATCH v3 0/2] Add mmc support for mt7988
  • From: Frank Wunderlich <linux@xxxxxxxxx>
• [PATCH v4 2/4] pinctrl: mediatek: add MT7988 pinctrl driver
  • From: Frank Wunderlich <linux@xxxxxxxxx>
• [PATCH v4 3/4] dt-bindings: pinctrl: add binding for MT7988 SoC
  • From: Frank Wunderlich <linux@xxxxxxxxx>
• [PATCH v4 4/4] arm64: dts: mediatek: mt7988: add pinctrl support
  • From: Frank Wunderlich <linux@xxxxxxxxx>
• [PATCH v4 1/4] pinctrl: mediatek: add support for MTK_PULL_PD_TYPE
  • From: Frank Wunderlich <linux@xxxxxxxxx>
• [PATCH v4 0/4] Add pinctrl support for mt7988
  • From: Frank Wunderlich <linux@xxxxxxxxx>
• Re: [PATCH v2] dt-bindings: leds: Document "rc-feedback" trigger
  • From: Heiko Stübner <heiko@xxxxxxxxx>
• Re: [PATCH net-next 03/11] dt-bindings: net: add bindings for NETC blocks control
  • From: Frank Li <Frank.li@xxxxxxx>
• Re: [PATCH] arm64: dts: qcom: sm8450: Add Broadcast_AND region in LLCC block
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH net-next 02/11] dt-bindings: net: add i.MX95 ENETC support
  • From: Frank Li <Frank.li@xxxxxxx>
• [PATCH net-next v3 2/3] net: emaclite: Replace alloc_etherdev() with devm_alloc_etherdev()
  • From: Radhey Shyam Pandey <radhey.shyam.pandey@xxxxxxx>
• [PATCH net-next v3 3/3] net: emaclite: Adopt clock support
  • From: Radhey Shyam Pandey <radhey.shyam.pandey@xxxxxxx>
• [PATCH net-next v3 1/3] dt-bindings: net: emaclite: Add clock support
  • From: Radhey Shyam Pandey <radhey.shyam.pandey@xxxxxxx>
• [PATCH net-next v3 0/3] net: xilinx: emaclite: Adopt clock support
  • From: Radhey Shyam Pandey <radhey.shyam.pandey@xxxxxxx>
• Re: [PATCH net-next 01/11] dt-bindings: net: add compatible string for i.MX95 EMDIO
  • From: Frank Li <Frank.li@xxxxxxx>
• Re: [PATCH 0/6] EDAC: fsl-ddr, add imx9 support
  • From: Borislav Petkov <bp@xxxxxxxxx>
• Re: [PATCH v2 0/5] Add RC-to-EP doorbell with platform MSI controller
  • From: Frank Li <Frank.li@xxxxxxx>
• [PATCH v2] arm64: dts: qcom: x1e80100: enable GICv3 ITS for PCIe
  • From: Johan Hovold <johan+linaro@xxxxxxxxxx>
• Re: [PATCH v2 1/3] pinctrl: s32: add missing pins definitions
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: (subset) [PATCH v1 03/11] dt-bindings: mfd: syscon document the non simple-mfd syscon on PolarFire SoC
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH v2 0/5] Add RC-to-EP doorbell with platform MSI controller
  • From: Niklas Cassel <cassel@xxxxxxxxxx>
• Re: [PATCH v3 5/6] i2c: nomadik: fix BRCR computation
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v8 3/3] dt-bindings: mfd: mediatek: mt6397: Convert to DT schema format
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH 0/6] EDAC: fsl-ddr, add imx9 support
  • From: Frank Li <Frank.li@xxxxxxx>
• Re: [PATCH v8 1/1] pwm: imx27: workaround of the pwm output bug when decrease the duty cycle
  • From: Frank Li <Frank.li@xxxxxxx>
• Re: [PATCH v2 net-next 1/2] dt-bindings: net: tja11xx: add "nxp,rmii-refclk-out" property
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH v7 3/3] drm/panel: Add support for S6E3HA8 panel driver
  • From: Dzmitry Sankouski <dsankouski@xxxxxxxxx>
• [PATCH v7 2/3] dt-bindings: panel: add Samsung s6e3ha8
  • From: Dzmitry Sankouski <dsankouski@xxxxxxxxx>
• [PATCH v7 1/3] drm/mipi-dsi: add mipi_dsi_compression_mode_multi
  • From: Dzmitry Sankouski <dsankouski@xxxxxxxxx>
• [PATCH v7 0/3] Add Samsung S6E3HA8 panel driver
  • From: Dzmitry Sankouski <dsankouski@xxxxxxxxx>
• Re: [PATCH v1] arm64: dts: qcom: qcm6490-rb3gen2: enable Bluetooth
  • From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
• Re: [PATCH 0/5] dt-bindings: mfd: convert zii,rave-sp.txt and child txt to yaml format
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v5 1/4] dt-bindings: imx6q-pcie: Add reg-name "dbi2" and "atu" for i.MX8M PCIe Endpoint
  • From: Niklas Cassel <cassel@xxxxxxxxxx>
• Re: [PATCH v4 5/8] iio: adc: ad7606: Add compatibility to fw_nodes
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH 2/5] dt-bindings: backlight: convert zii,rave-sp-backlight.txt to yaml
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v4 7/8] iio: adc: ad7606: Add iio-backend support
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH v4 5/8] iio: adc: ad7606: Add compatibility to fw_nodes
  • From: Guillaume Stols <gstols@xxxxxxxxxxxx>
• Re: [PATCH v2] dt-bindings: leds: Document "rc-feedback" trigger
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH v4 8/8] iio: adc: ad7606: Disable PWM usage for non backend version
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH v4 6/8] iio: adc: ad7606: Introduce num_adc_channels
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH v4 5/8] iio: adc: ad7606: Add compatibility to fw_nodes
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• [PATCH v4 5/5] arm64: dts: qcom: sa8775p: add display dt nodes for MDSS0 and DPU
  • From: Mahadevan <quic_mahap@xxxxxxxxxxx>
• [PATCH v4 4/5] drm/msm/dpu: Add SA8775P support
  • From: Mahadevan <quic_mahap@xxxxxxxxxxx>
• [PATCH v4 3/5] drm/msm: mdss: Add SA8775P support
  • From: Mahadevan <quic_mahap@xxxxxxxxxxx>
• [PATCH v4 2/5] dt-bindings: display/msm: Document the DPU for SA8775P
  • From: Mahadevan <quic_mahap@xxxxxxxxxxx>
• [PATCH v4 1/5] dt-bindings: display/msm: Document MDSS on SA8775P
  • From: Mahadevan <quic_mahap@xxxxxxxxxxx>
• [PATCH v4 0/5] Display enablement changes for Qualcomm SA8775P platform
  • From: Mahadevan <quic_mahap@xxxxxxxxxxx>
• Re: [PATCH v6 3/3] regulator: add s2dos05 regulator support
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH v4 4/8] iio: adc: ad7606: Add PWM support for conversion trigger
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: (subset) [PATCH v5 0/3] Add Samsung s2dos05 pmic support
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH 2/5] dt-bindings: backlight: convert zii,rave-sp-backlight.txt to yaml
  • From: Daniel Thompson <daniel.thompson@xxxxxxxxxx>
• [PATCH] arm64: dts: rockchip: Add dtsi file for RK3399S SoC variant
  • From: Dragan Simic <dsimic@xxxxxxxxxxx>
• Re: [PATCH 1/6] dt-bindings: remoteproc: qcom,pas-common: Introduce iommus and qcom,devmem property
  • From: Shiraz Hashim <quic_shashim@xxxxxxxxxxx>
• [PATCH v3 6/6] i2c: nomadik: support >=1MHz speed modes
  • From: Théo Lebrun <theo.lebrun@xxxxxxxxxxx>
• [PATCH v3 5/6] i2c: nomadik: fix BRCR computation
  • From: Théo Lebrun <theo.lebrun@xxxxxxxxxxx>
• [PATCH v3 4/6] i2c: nomadik: support Mobileye EyeQ6H I2C controller
  • From: Théo Lebrun <theo.lebrun@xxxxxxxxxxx>
• [PATCH v3 3/6] i2c: nomadik: switch from of_device_is_compatible() to of_match_device()
  • From: Théo Lebrun <theo.lebrun@xxxxxxxxxxx>
• [PATCH v3 2/6] dt-bindings: i2c: nomadik: support 400kHz < clock-frequency <= 3.4MHz
  • From: Théo Lebrun <theo.lebrun@xxxxxxxxxxx>
• [PATCH v3 0/6] i2c: nomadik: support >=1MHz & Mobileye EyeQ6H platform
  • From: Théo Lebrun <theo.lebrun@xxxxxxxxxxx>
• [PATCH v3 1/6] dt-bindings: i2c: nomadik: add mobileye,eyeq6h-i2c bindings
  • From: Théo Lebrun <theo.lebrun@xxxxxxxxxxx>
• Re: [PATCH 0/6] Peripheral Image Loader support for Qualcomm SoCs
  • From: Shiraz Hashim <quic_shashim@xxxxxxxxxxx>
• [no subject]
  • From: Unknown
• Re: [PATCH v6 11/33] riscv/mm : ensure PROT_WRITE leads to VM_READ | VM_WRITE
  • From: Lorenzo Stoakes <lorenzo.stoakes@xxxxxxxxxx>
• Re: [PATCH v2 5/6] i2c: nomadik: fix BRCR computation
  • From: Théo Lebrun <theo.lebrun@xxxxxxxxxxx>
• Re: [PATCH net-next 1/4] dt-bindings: leds: add 'active-high' property
  • From: Daniel Golle <daniel@xxxxxxxxxxxxxx>
• Re: [PATCH v2 5/6] i2c: nomadik: fix BRCR computation
  • From: Théo Lebrun <theo.lebrun@xxxxxxxxxxx>
• Re: [PATCH v3 4/5] soc: rockchip: power-domain: Add GENPD_FLAG_RPM_ALWAYS_ON support
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• [PATCH v2 3/3] ARM: dts: ti: omap3434-sdp: drop linux,mtd-name from onenand node
  • From: Roger Quadros <rogerq@xxxxxxxxxx>
• [PATCH v2 2/3] ARM: dts: ti: omap: am335x-baltos: drop "gpmc,device-nand" from NAND node
  • From: Roger Quadros <rogerq@xxxxxxxxxx>
• [PATCH v2 1/3] ARM: dts: ti: drop linux,mtd-name from NAND nodes
  • From: Roger Quadros <rogerq@xxxxxxxxxx>
• [PATCH v2 0/3] ARM: dts: ti: omap: fix dtbs_check warnings for ti,gpmc-nand and ti,gpmc-onenend
  • From: Roger Quadros <rogerq@xxxxxxxxxx>
• Re: [PATCH v3 5/5] scsi: ufs: rockchip: initial support for UFS
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• [PATCH v4] arm64: dts: mt8183: set DMIC one-wire mode on Damu
  • From: Hsin-Te Yuan <yuanhsinte@xxxxxxxxxxxx>
• [PATCH 3/4] arm64: dts: mt8183: cozmo: add i2c2's i2c-scl-internal-delay-ns
  • From: Hsin-Te Yuan <yuanhsinte@xxxxxxxxxxxx>
• [PATCH 4/4] arm64: dts: mt8183: Damu: add i2c2's i2c-scl-internal-delay-ns
  • From: Hsin-Te Yuan <yuanhsinte@xxxxxxxxxxxx>
• Re: [PATCH v5 2/4] media: dt-bindings: Add OmniVision OV08X40
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• [PATCH 2/4] arm64: dts: mt8183: burnet: add i2c2's i2c-scl-internal-delay-ns
  • From: Hsin-Te Yuan <yuanhsinte@xxxxxxxxxxxx>
• [PATCH 1/4] arm64: dts: mt8183: fennel: add i2c2's i2c-scl-internal-delay-ns
  • From: Hsin-Te Yuan <yuanhsinte@xxxxxxxxxxxx>
• [PATCH 0/4] arm64: dts: mt8183: Add i2c-scl-internal-delay-ns
  • From: Hsin-Te Yuan <yuanhsinte@xxxxxxxxxxxx>
• Re: [PATCH v3 1/2] dt-bindings: interrupt-controller: Add support for ASPEED AST27XX INTC
  • From: Markus Elfring <Markus.Elfring@xxxxxx>
• Re: [PATCH v2 1/6] dt-bindings: media: qcom,sc8280xp-camss: Fix interrupt types
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• [PATCH] dt-bindings: imx-rng: Allow passing only "fsl,imx31-rnga"
  • From: Fabio Estevam <festevam@xxxxxxxxx>
• Re: [PATCH v1 02/10] media: platform: mediatek: add seninf controller
  • From: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
• RE: [PATCH v2 net-next 2/2] net: phy: c45-tja11xx: add support for outputing RMII reference clock
  • From: Wei Fang <wei.fang@xxxxxxx>
• Re: [PATCH v6 19/33] riscv: Implements arch agnostic shadow stack prctls
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH] firmware: arm_scmi: Give SMC transport precedence over mailbox
  • From: Sudeep Holla <sudeep.holla@xxxxxxx>
• Re: [PATCH v6 1/3] drm/mipi-dsi: add mipi_dsi_compression_mode_multi
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• Re: [PATCH v3 2/2] irqchip/aspeed-intc: Add support for AST27XX INTC
  • From: Markus Elfring <Markus.Elfring@xxxxxx>
• [PATCH v3] arm64: dts: mt8183: set DMIC one-wire mode on Damu
  • From: Hsin-Te Yuan <yuanhsinte@xxxxxxxxxxxx>
• Re: [PATCH v6 1/3] drm/mipi-dsi: add mipi_dsi_compression_mode_multi
  • From: kernel test robot <lkp@xxxxxxxxx>
• [PATCH v3 3/3] dt-bindings: mmc: mtk-sd: Add support for MT8196
  • From: Andy-ld Lu <andy-ld.lu@xxxxxxxxxxxx>
• [PATCH v3 2/3] mmc: mtk-sd: Add two settings in platdata
  • From: Andy-ld Lu <andy-ld.lu@xxxxxxxxxxxx>
• [PATCH v3 1/3] mmc: mtk-sd: Add support for MT8196
  • From: Andy-ld Lu <andy-ld.lu@xxxxxxxxxxxx>
• [PATCH v3 0/3] Add mtk-sd support for MT8196
  • From: Andy-ld Lu <andy-ld.lu@xxxxxxxxxxxx>
• [PATCH v3 2/2] irqchip/aspeed-intc: Add support for AST27XX INTC
  • From: Kevin Chen <kevin_chen@xxxxxxxxxxxxxx>
• [PATCH v3 1/2] dt-bindings: interrupt-controller: Add support for ASPEED AST27XX INTC
  • From: Kevin Chen <kevin_chen@xxxxxxxxxxxxxx>
• [PATCH v3 0/2] Add support for AST2700 INTC driver
  • From: Kevin Chen <kevin_chen@xxxxxxxxxxxxxx>
• Re: [PATCH v2 net-next 2/2] net: phy: c45-tja11xx: add support for outputing RMII reference clock
  • From: Simon Horman <horms@xxxxxxxxxx>
• Re: [PATCH v2 1/2] clk: imx93: Move IMX93_CLK_END macro to clk driver
  • From: Abel Vesa <abel.vesa@xxxxxxxxxx>
• Re: [PATCH v2 6/6] i2c: nomadik: support >=1MHz speed modes
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v2 5/6] i2c: nomadik: fix BRCR computation
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v6 06/33] riscv/Kconfig: enable HAVE_EXIT_THREAD for riscv
  • From: Mark Brown <broonie@xxxxxxxxxx>
• [PATCH v6 5/5] arm64: dts: qcom: Add CTCU and ETR nodes for SA8775p
  • From: Jie Gan <quic_jiegan@xxxxxxxxxxx>
• [PATCH v6 4/5] Coresight: Add Coresight TMC Control Unit driver
  • From: Jie Gan <quic_jiegan@xxxxxxxxxxx>
• [PATCH v6 3/5] dt-bindings: arm: Add Coresight TMC Control Unit hardware
  • From: Jie Gan <quic_jiegan@xxxxxxxxxxx>
• [PATCH v6 2/5] Coresight: Add trace_id function to retrieving the trace ID
  • From: Jie Gan <quic_jiegan@xxxxxxxxxxx>
• [PATCH v6 0/5] Coresight: Add Coresight TMC Control Unit driver
  • From: Jie Gan <quic_jiegan@xxxxxxxxxxx>
• [PATCH v6 1/5] Coresight: Add support for new APB clock name
  • From: Jie Gan <quic_jiegan@xxxxxxxxxxx>
• Re: [PATCH v2 4/6] i2c: nomadik: support Mobileye EyeQ6H I2C controller
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v2 3/6] i2c: nomadik: switch from of_device_is_compatible() to of_match_device()
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH 7/7] scsi: ufs: exynos: add gs101_ufs_drv_init() hook and enable WriteBooster
  • From: Peter Griffin <peter.griffin@xxxxxxxxxx>
• [PATCH 6/7] scsi: ufs: exynos: remove tx_dif_p_nsec from exynosauto_ufs_drv_init()
  • From: Peter Griffin <peter.griffin@xxxxxxxxxx>
• [PATCH 5/7] scsi: ufs: exynos: gs101: remove unused phy attribute fields
  • From: Peter Griffin <peter.griffin@xxxxxxxxxx>
• [PATCH 4/7] scsi: ufs: exynos: Add EXYNOS_UFS_OPT_SKIP_CONFIG_PHY_ATTR check
  • From: Peter Griffin <peter.griffin@xxxxxxxxxx>
• [PATCH 3/7] scsi: ufs: exynos: gs101: remove EXYNOS_UFS_OPT_BROKEN_AUTO_CLK_CTRL
  • From: Peter Griffin <peter.griffin@xxxxxxxxxx>
• [PATCH 2/7] scsi: ufs: exynos: add check inside exynos_ufs_config_smu()
  • From: Peter Griffin <peter.griffin@xxxxxxxxxx>
• [PATCH 1/7] scsi: ufs: exynos: Allow UFS Gear 4
  • From: Peter Griffin <peter.griffin@xxxxxxxxxx>