On 1/8/25 7:11 AM, Nishanth Menon wrote:
On 14:46-20250107, Kevin Hilman wrote:
Nishanth Menon <nm@xxxxxx> writes:
On 15:07-20241205, Kevin Hilman wrote:
On Mon, 02 Dec 2024 15:33:30 +0100, Romain Naour wrote:
The ACSPCIE_PROXY_CTRL registers within the CTRL_MMR space of TI's J721e
SoC are used to drive the reference clock to the PCIe Endpoint device via
the PAD IO Buffers. Add the compatible for allowing the PCIe driver to
obtain the regmap for the ACSPCIE_CTRL register within the System
Controller device-tree node in order to enable the PAD IO Buffers.
The Technical Reference Manual for J721e SoC with details of the
ASCPCIE_CTRL registers is available at:
https://www.ti.com/lit/zip/spruil1
[...]
Applied, thanks!
[1/2] dt-bindings: mfd: syscon: Add ti,j721e-acspcie-proxy-ctrl compatible
commit: d8efc0b428856137608ffcbb6994da6041c9fe2a
[2/2] arm64: dts: ti: k3-j721e-beagleboneai64: Enable ACSPCIE output for PCIe1
commit: 1d5e14a20dc60b440c60bec8489acfd45cdf7508
Best regards,
--
Kevin Hilman <khilman@xxxxxxxxxxxx>
This will need a bit of fixup - See along the lines of the following.
Additionally, we should be a bit careful about the dependency of dts
mix up from two trees.
sorry, these should be going through your tree in the first place. They
are now dropped from my tree, please go ahead and take them along with
Andrews fixup. Sorry for complicating things.
Romain,
There is additional fixups needed, unfortunately as well: syscon yaml
has two lists based on which dt-schema version you use.. your patch
fixed one list, but missed the other as well. Could you integrate the
fixes and resubmit, please?
Or since we already have 'ti,j784s4-acspcie-proxy-ctrl' for the same
reason, you could drop the first patch and re-use this compatible.
For the second patch, you'll still need to add in my suggested
changes and re-send.
Andrew
