On Fri, Oct 11, 2024 at 01:27:31PM +0300, Aleksandr Shubin wrote: > v2: > - fix dt-bindings > - fix a remark in the driver > > v3: > - fix dt-bindings > - fix sunxi-d1s-t113.dtsi > > v4: > - fix a remark in the driver > > v5: > - dropped unused varibale in the driver > - fix dt-bindings > > v6: > - add apb0 clock > > v7: > - fix a remark in the driver > - add maintainer > > v8: > - fix compile driver for 6.8-rc > > v9: > - fix a remark in the driver > - fix dt-bindings > - rename apb0 -> apb > > v10: > - fix a remark in the driver > - fix compile driver for 6.12-rc2 > > Aleksandr Shubin (3): > dt-bindings: pwm: Add binding for Allwinner D1/T113-S3/R329 PWM > controller > pwm: Add Allwinner's D1/T113-S3/R329 SoCs PWM support > riscv: dts: allwinner: d1: Add pwm node > > .../bindings/pwm/allwinner,sun20i-pwm.yaml | 84 ++++ > .../boot/dts/allwinner/sunxi-d1s-t113.dtsi | 12 + > drivers/pwm/Kconfig | 10 + > drivers/pwm/Makefile | 1 + > drivers/pwm/pwm-sun20i.c | 379 ++++++++++++++++++ > 5 files changed, 486 insertions(+) > create mode 100644 Documentation/devicetree/bindings/pwm/allwinner,sun20i-pwm.yaml > create mode 100644 drivers/pwm/pwm-sun20i.c > > -- > 2.25.1 > This patch has been idle for a few months, would you mind if I took over shepherding it to mainline? While I don't have *this* hardware to test it with I have an H616 which has a similar pwm controller (and for which I was going to add support for once this made it to mainline). Otherwise, I can just wait patiently and then tack on my additions once this has been accepted. Thank you, Chris
