Add DT support for QUPv3 Serial Engines. Co-developed-by: Mukesh Kumar Savaliya <quic_msavaliy@xxxxxxxxxxx> Signed-off-by: Mukesh Kumar Savaliya <quic_msavaliy@xxxxxxxxxxx> Signed-off-by: Viken Dadhaniya <quic_vdadhani@xxxxxxxxxxx> --- Build Dependencies: Base: https://lore.kernel.org/linux-devicetree/20240926-add_initial_support_for_qcs615-v3-5-e37617e91c62@xxxxxxxxxxx/ https://lore.kernel.org/linux-devicetree/20240926-add_initial_support_for_qcs615-v3-6-e37617e91c62@xxxxxxxxxxx/ Clock: https://lore.kernel.org/linux-devicetree/20240920-qcs615-clock-driver-v2-3-2f6de44eb2aa@xxxxxxxxxxx/ ICC: https://lore.kernel.org/linux-devicetree/20240924143958.25-2-quic_rlaggysh@xxxxxxxxxxx/ Apps SMMU: https://lore.kernel.org/all/20241011063112.19087-1-quic_qqzhou@xxxxxxxxxxx/ --- arch/arm64/boot/dts/qcom/qcs615.dtsi | 602 ++++++++++++++++++++++++++- 1 file changed, 598 insertions(+), 4 deletions(-) diff --git a/arch/arm64/boot/dts/qcom/qcs615.dtsi b/arch/arm64/boot/dts/qcom/qcs615.dtsi index 865ead601f85..9d7fc6fc5c6e 100644 --- a/arch/arm64/boot/dts/qcom/qcs615.dtsi +++ b/arch/arm64/boot/dts/qcom/qcs615.dtsi @@ -5,6 +5,7 @@ #include <dt-bindings/clock/qcom,qcs615-gcc.h> #include <dt-bindings/clock/qcom,rpmh.h> +#include <dt-bindings/dma/qcom-gpi.h> #include <dt-bindings/interconnect/qcom,icc.h> #include <dt-bindings/interconnect/qcom,qcs615-rpmh.h> #include <dt-bindings/interrupt-controller/arm-gic.h> @@ -17,6 +18,21 @@ #address-cells = <2>; #size-cells = <2>; + aliases { + i2c1 = &i2c1; + i2c2 = &i2c2; + i2c3 = &i2c3; + i2c4 = &i2c4; + i2c5 = &i2c5; + i2c6 = &i2c6; + i2c7 = &i2c7; + spi2 = &spi2; + spi4 = &spi4; + spi6 = &spi6; + spi7 = &spi7; + serial0 = &uart0; + }; + cpus { #address-cells = <2>; #size-cells = <0>; @@ -296,6 +312,25 @@ qcom,bcm-voters = <&apps_bcm_voter>; }; + qup_opp_table: opp-table-qup { + compatible = "operating-points-v2"; + + opp-75000000 { + opp-hz = /bits/ 64 <75000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-100000000 { + opp-hz = /bits/ 64 <100000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-128000000 { + opp-hz = /bits/ 64 <128000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; + psci { compatible = "arm,psci-1.0"; method = "smc"; @@ -392,6 +427,24 @@ #size-cells = <1>; }; + gpi_dma0: qcom,gpi-dma@800000 { + compatible = "qcom,sdm845-gpi-dma"; + reg = <0x0 0x800000 0x0 0x60000>; + #dma-cells = <3>; + interrupts = <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 250 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH>; + dma-channels = <8>; + dma-channel-mask = <0xf>; + iommus = <&apps_smmu 0xd6 0x0>; + status = "disabled"; + }; + qupv3_id_0: geniqup@8c0000 { compatible = "qcom,geni-se-qup"; reg = <0x0 0x8c0000 0x0 0x6000>; @@ -400,6 +453,7 @@ <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>; clock-names = "m-ahb", "s-ahb"; + iommus = <&apps_smmu 0xc3 0x0>; #address-cells = <2>; #size-cells = <2>; status = "disabled"; @@ -412,13 +466,377 @@ pinctrl-0 = <&qup_uart0_tx>, <&qup_uart0_rx>; pinctrl-names = "default"; interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>; - interconnects = <&aggre1_noc MASTER_QUP_0 0 - &mc_virt SLAVE_EBI1 0>, - <&gem_noc MASTER_APPSS_PROC 0 - &config_noc SLAVE_QUP_0 0>; + interconnects = <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>; + interconnect-names = "qup-core", + "qup-config"; + power-domains = <&rpmhpd RPMHPD_CX>; + status = "disabled"; + }; + + i2c1: i2c@884000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x884000 0x0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>; + clock-names = "se"; + pinctrl-0 = <&qup_i2c1_data_clk>; + pinctrl-names = "default"; + interconnects = <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>, + <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + power-domains = <&rpmhpd RPMHPD_CX>; + dmas = <&gpi_dma0 0 1 QCOM_GPI_I2C>, + <&gpi_dma0 1 1 QCOM_GPI_I2C>; + dma-names = "tx", + "rx"; + status = "disabled"; + }; + + i2c2: i2c@888000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x888000 0x0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>; + clock-names = "se"; + pinctrl-0 = <&qup_i2c2_data_clk>; + pinctrl-names = "default"; + interconnects = <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>, + <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + power-domains = <&rpmhpd RPMHPD_CX>; + dmas = <&gpi_dma0 0 2 QCOM_GPI_I2C>, + <&gpi_dma0 1 2 QCOM_GPI_I2C>; + dma-names = "tx", + "rx"; + status = "disabled"; + }; + + spi2: spi@888000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0x00888000 0x0 0x4000>; + interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>; + clock-names = "se"; + pinctrl-0 = <&qup_spi2_data_clk>, <&qup_spi2_cs>; + pinctrl-names = "default"; + interconnects = <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>; + interconnect-names = "qup-core", + "qup-config"; + power-domains = <&rpmhpd RPMHPD_CX>; + dmas = <&gpi_dma0 0 2 QCOM_GPI_SPI>, + <&gpi_dma0 1 2 QCOM_GPI_SPI>; + dma-names = "tx", + "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + uart2: serial@888000 { + compatible = "qcom,geni-uart"; + reg = <0x0 0x00888000 0x0 0x4000>; + interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>; + clock-names = "se"; + pinctrl-0 = <&qup_uart2_cts>, <&qup_uart2_rts>, + <&qup_uart2_tx>, <&qup_uart2_rx>; + pinctrl-names = "default"; + interconnects = <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>; + interconnect-names = "qup-core", + "qup-config"; + power-domains = <&rpmhpd RPMHPD_CX>; + status = "disabled"; + }; + + i2c3: i2c@88c000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x88c000 0x0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>; + clock-names = "se"; + pinctrl-0 = <&qup_i2c3_data_clk>; + pinctrl-names = "default"; + interconnects = <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>, + <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + power-domains = <&rpmhpd RPMHPD_CX>; + dmas = <&gpi_dma0 0 3 QCOM_GPI_I2C>, + <&gpi_dma0 1 3 QCOM_GPI_I2C>; + dma-names = "tx", + "rx"; + status = "disabled"; + }; + }; + + gpi_dma1: qcom,gpi-dma@a00000 { + compatible = "qcom,sdm845-gpi-dma"; + reg = <0x0 0xa00000 0x0 0x60000>; + #dma-cells = <3>; + interrupts = <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 284 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 293 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 294 IRQ_TYPE_LEVEL_HIGH>; + dma-channels = <8>; + dma-channel-mask = <0xf>; + iommus = <&apps_smmu 0x376 0x0>; + status = "disabled"; + }; + + qupv3_id_1: geniqup@ac0000 { + compatible = "qcom,geni-se-qup"; + reg = <0x0 0xac0000 0x0 0x2000>; + ranges; + clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>, + <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>; + clock-names = "m-ahb", + "s-ahb"; + iommus = <&apps_smmu 0x363 0x0>; + #address-cells = <2>; + #size-cells = <2>; + status = "disabled"; + + i2c4: i2c@a80000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0xa80000 0x0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>; + clock-names = "se"; + pinctrl-0 = <&qup_i2c4_data_clk>; + pinctrl-names = "default"; + interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&aggre1_noc MASTER_BLSP_1 0 &mc_virt SLAVE_EBI1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>, + <&aggre1_noc MASTER_BLSP_1 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + power-domains = <&rpmhpd RPMHPD_CX>; + required-opps = <&rpmhpd_opp_low_svs>; + dmas = <&gpi_dma1 0 0 QCOM_GPI_I2C>, + <&gpi_dma1 1 0 QCOM_GPI_I2C>; + dma-names = "tx", + "rx"; + status = "disabled"; + }; + + spi4: spi@a80000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0xa80000 0x0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>; + clock-names = "se"; + pinctrl-0 = <&qup_spi4_data_clk>, <&qup_spi4_cs>; + pinctrl-names = "default"; + interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&aggre1_noc MASTER_BLSP_1 0 &mc_virt SLAVE_EBI1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>; + interconnect-names = "qup-core", + "qup-config"; + power-domains = <&rpmhpd RPMHPD_CX>; + operating-points-v2 = <&qup_opp_table>; + dmas = <&gpi_dma1 0 0 QCOM_GPI_SPI>, + <&gpi_dma1 1 0 QCOM_GPI_SPI>; + dma-names = "tx", + "rx"; + status = "disabled"; + }; + + uart4: serial@a80000 { + compatible = "qcom,geni-uart"; + reg = <0x0 0xa80000 0x0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>; + clock-names = "se"; + pinctrl-0 = <&qup_uart4_cts>, <&qup_uart4_rts>, + <&qup_uart4_tx>, <&qup_uart4_rx>; + pinctrl-names = "default"; + interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>; + interconnects = <&aggre1_noc MASTER_BLSP_1 0 &mc_virt SLAVE_EBI1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>; + interconnect-names = "qup-core", + "qup-config"; + power-domains = <&rpmhpd RPMHPD_CX>; + operating-points-v2 = <&qup_opp_table>; + status = "disabled"; + }; + + i2c5: i2c@a84000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0xa84000 0x0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>; + clock-names = "se"; + pinctrl-0 = <&qup_i2c5_data_clk>; + pinctrl-names = "default"; + interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&aggre1_noc MASTER_BLSP_1 0 &mc_virt SLAVE_EBI1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>, + <&aggre1_noc MASTER_BLSP_1 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + power-domains = <&rpmhpd RPMHPD_CX>; + required-opps = <&rpmhpd_opp_low_svs>; + dmas = <&gpi_dma1 0 1 QCOM_GPI_I2C>, + <&gpi_dma1 1 1 QCOM_GPI_I2C>; + dma-names = "tx", + "rx"; + status = "disabled"; + }; + + i2c6: i2c@a88000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0xa88000 0x0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>; + clock-names = "se"; + pinctrl-0 = <&qup_i2c6_data_clk>; + pinctrl-names = "default"; + interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&aggre1_noc MASTER_BLSP_1 0 &mc_virt SLAVE_EBI1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>, + <&aggre1_noc MASTER_BLSP_1 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + power-domains = <&rpmhpd RPMHPD_CX>; + required-opps = <&rpmhpd_opp_low_svs>; + dmas = <&gpi_dma1 0 2 QCOM_GPI_I2C>, + <&gpi_dma1 1 2 QCOM_GPI_I2C>; + dma-names = "tx", + "rx"; + status = "disabled"; + }; + + spi6: spi@a88000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0xa88000 0x0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>; + clock-names = "se"; + pinctrl-0 = <&qup_spi6_data_clk>, <&qup_spi6_cs>; + pinctrl-names = "default"; + interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&aggre1_noc MASTER_BLSP_1 0 &mc_virt SLAVE_EBI1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>; + interconnect-names = "qup-core", + "qup-config"; + power-domains = <&rpmhpd RPMHPD_CX>; + operating-points-v2 = <&qup_opp_table>; + dmas = <&gpi_dma1 0 2 QCOM_GPI_SPI>, + <&gpi_dma1 1 2 QCOM_GPI_SPI>; + dma-names = "tx", + "rx"; + status = "disabled"; + }; + + uart6: serial@a88000 { + compatible = "qcom,geni-uart"; + reg = <0x0 0xa88000 0x0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>; + clock-names = "se"; + pinctrl-0 = <&qup_uart6_cts>, <&qup_uart6_rts>, + <&qup_uart6_tx>, <&qup_uart6_rx>; + pinctrl-names = "default"; + interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>; + interconnects = <&aggre1_noc MASTER_BLSP_1 0 &mc_virt SLAVE_EBI1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>; + interconnect-names = "qup-core", + "qup-config"; + power-domains = <&rpmhpd RPMHPD_CX>; + operating-points-v2 = <&qup_opp_table>; + status = "disabled"; + }; + + i2c7: i2c@a8c000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0xa8c000 0x0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>; + clock-names = "se"; + pinctrl-0 = <&qup_i2c7_data_clk>; + pinctrl-names = "default"; + interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&aggre1_noc MASTER_BLSP_1 0 &mc_virt SLAVE_EBI1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>, + <&aggre1_noc MASTER_BLSP_1 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + power-domains = <&rpmhpd RPMHPD_CX>; + required-opps = <&rpmhpd_opp_low_svs>; + dmas = <&gpi_dma1 0 3 QCOM_GPI_I2C>, + <&gpi_dma1 1 3 QCOM_GPI_I2C>; + dma-names = "tx", + "rx"; + status = "disabled"; + }; + + spi7: spi@a8c000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0xa8c000 0x0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>; + clock-names = "se"; + pinctrl-0 = <&qup_spi7_data_clk>, <&qup_spi7_cs>; + pinctrl-names = "default"; + interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&aggre1_noc MASTER_BLSP_1 0 &mc_virt SLAVE_EBI1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>; interconnect-names = "qup-core", "qup-config"; power-domains = <&rpmhpd RPMHPD_CX>; + operating-points-v2 = <&qup_opp_table>; + dmas = <&gpi_dma1 0 3 QCOM_GPI_SPI>, + <&gpi_dma1 1 3 QCOM_GPI_SPI>; + dma-names = "tx", + "rx"; + status = "disabled"; + }; + + uart7: serial@a8c000 { + compatible = "qcom,geni-uart"; + reg = <0x0 0xa8c000 0x0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>; + clock-names = "se"; + pinctrl-0 = <&qup_uart7_cts>, <&qup_uart7_rts>, + <&qup_uart7_tx>, <&qup_uart7_rx>; + pinctrl-names = "default"; + interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>; + interconnects = <&aggre1_noc MASTER_BLSP_1 0 &mc_virt SLAVE_EBI1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>; + interconnect-names = "qup-core", + "qup-config"; + power-domains = <&rpmhpd RPMHPD_CX>; + operating-points-v2 = <&qup_opp_table>; status = "disabled"; }; }; @@ -478,6 +896,102 @@ #interrupt-cells = <2>; wakeup-parent = <&pdc>; + qup_i2c1_data_clk: qup-i2c1-data-clk-state { + pins = "gpio4", "gpio5"; + function = "qup0"; + + }; + + qup_i2c2_data_clk: qup-i2c2-data-clk-state { + pins = "gpio0", "gpio1"; + function = "qup0"; + }; + + qup_i2c3_data_clk: qup-i2c3-data-clk-state { + pins = "gpio18", "gpio19"; + function = "qup0"; + }; + + qup_i2c4_data_clk: qup-i2c4-data-clk-state { + pins = "gpio20", "gpio21"; + function = "qup1"; + }; + + qup_i2c5_data_clk: qup-i2c5-data-clk-state { + pins = "gpio14", "gpio15"; + function = "qup1"; + }; + + qup_i2c6_data_clk: qup-i2c6-data-clk-state { + pins = "gpio6", "gpio7"; + function = "qup1"; + }; + + qup_i2c7_data_clk: qup-i2c7-data-clk-state { + pins = "gpio10", "gpio11"; + function = "qup1"; + }; + + qup_spi2_data_clk: qup-spi2-data-clk-state { + pins = "gpio0", "gpio1", "gpio2"; + function = "qup0"; + }; + + qup_spi2_cs: qup-spi2-cs-state { + pins = "gpio3"; + function = "qup0"; + }; + + qup_spi2_cs_gpio: qup-spi2-cs-gpio-state { + pins = "gpio3"; + function = "gpio"; + }; + + qup_spi4_data_clk: qup-spi4-data-clk-state { + pins = "gpio20", "gpio21", "gpio22"; + function = "qup1"; + }; + + qup_spi4_cs: qup-spi4-cs-state { + pins = "gpio23"; + function = "qup1"; + }; + + qup_spi4_cs_gpio: qup-spi4-cs-gpio-state { + pins = "gpio23"; + function = "gpio"; + }; + + qup_spi6_data_clk: qup-spi6-data-clk-state { + pins = "gpio6", "gpio7", "gpio8"; + function = "qup1"; + }; + + qup_spi6_cs: qup-spi6-cs-state { + pins = "gpio9"; + function = "qup1"; + }; + + qup_spi6_cs_gpio: qup-spi6-cs-gpio-state { + pins = "gpio9"; + function = "gpio"; + }; + + qup_spi7_data_clk: qup-spi7-data-clk-state { + pins = "gpio10", "gpio11", "gpio12"; + function = "qup1"; + }; + + qup_spi7_cs: qup-spi7-cs-state { + pins = "gpio13"; + function = "qup1"; + }; + + qup_spi7_cs_gpio: qup-spi7-cs-gpio-state { + pins = "gpio13"; + function = "gpio"; + }; + qup_uart0_tx: qup-uart0-tx-state { pins = "gpio16"; function = "qup0"; @@ -487,6 +1001,86 @@ pins = "gpio17"; function = "qup0"; }; + + qup_uart2_cts: qup-uart2-cts-state { + pins = "gpio0"; + function = "qup0"; + }; + + qup_uart2_rts: qup-uart2-rts-state { + pins = "gpio1"; + function = "qup0"; + }; + + qup_uart2_tx: qup-uart2-tx-state { + pins = "gpio2"; + function = "qup0"; + }; + + qup_uart2_rx: qup-uart2-rx-state { + pins = "gpio3"; + function = "qup0"; + }; + + qup_uart4_cts: qup-uart4-cts-state { + pins = "gpio20"; + function = "qup1"; + }; + + qup_uart4_rts: qup-uart4-rts-state { + pins = "gpio21"; + function = "qup1"; + }; + + qup_uart4_tx: qup-uart4-tx-state { + pins = "gpio22"; + function = "qup1"; + }; + + qup_uart4_rx: qup-uart4-rx-state { + pins = "gpio23"; + function = "qup1"; + }; + + qup_uart6_cts: qup-uart6-cts-state { + pins = "gpio6"; + function = "qup1"; + }; + + qup_uart6_rts: qup-uart6-rts-state { + pins = "gpio7"; + function = "qup1"; + }; + + qup_uart6_tx: qup-uart6-tx-state { + pins = "gpio8"; + function = "qup1"; + }; + + qup_uart6_rx: qup-uart6-rx-state { + pins = "gpio9"; + function = "qup1"; + }; + + qup_uart7_cts: qup-uart7-cts-state { + pins = "gpio10"; + function = "qup1"; + }; + + qup_uart7_rts: qup-uart7-rts-state { + pins = "gpio11"; + function = "qup1"; + }; + + qup_uart7_tx: qup-uart7-tx-state { + pins = "gpio12"; + function = "qup1"; + }; + + qup_uart7_rx: qup-uart7-rx-state { + pins = "gpio13"; + function = "qup1"; + }; }; dc_noc: interconnect@9160000 { -- 2.17.1
