On Wed, Feb 12, 2025 at 03:12:23PM +0800, Yongxing Mou wrote: > This series of patches introduces how to enable MST functionality on > the qcs8300 platform. The qcs8300 platform uses dpu_8_4 hardware, which > is the same as the sa8775p, but it only has one DPU. So it only has one > DP0 controller, supporting 4-stream MST. This patch only enables > 2-stream MST, using intf0 and intf3. The first and second patches are > modifications to the correspond dt-bindings, third patch is the dp > controller driver after not reuse sm8650, fourth patch is the qcs8300 > dts modification which add the clk support for stream 1. > > Signed-off-by: Yongxing Mou <quic_yongmou@xxxxxxxxxxx> > --- > This patch depends on following series: > https://lore.kernel.org/all/20250120-mdssdt_qcs8300-v4-0-1687e7842125@xxxxxxxxxxx/ > https://lore.kernel.org/all/20250114-dts_qcs8300-v3-0-d114cc5e4af9@xxxxxxxxxxx/ > https://lore.kernel.org/all/20241202-dp_mst_bindings-v1-0-9a9a43b0624a@xxxxxxxxxxx > https://lore.kernel.org/all/20241205-dp_mst-v1-0-f8618d42a99a@xxxxxxxxxxx/ > > --- > Yongxing Mou (4): > dt-bindings: display/msm: Redocument the dp-controller for QCS8300 > dt-bindings: display/msm: Add stream 1 pixel clock for QCS8300 > drm/msm/dp: Populate the max_streams for qcs8300 mst controller > arm64: dts: qcom: qcs8300: Add support for stream 1 clk for DP MST > > .../devicetree/bindings/display/msm/dp-controller.yaml | 5 +---- > .../devicetree/bindings/display/msm/qcom,qcs8300-mdss.yaml | 14 ++++++++------ > arch/arm64/boot/dts/qcom/qcs8300.dtsi | 12 ++++++++---- > drivers/gpu/drm/msm/dp/dp_display.c | 8 ++++++++ > 4 files changed, 25 insertions(+), 14 deletions(-) > --- > base-commit: 7ba9bcc5090556c007d9a718d7176e097fe54f19 Your series doesn't apply because this commit doesn't exist in any repo I have. Rob
