Pulseaudio Discussion - Date Index

• Thread Index

• [PATCH v4 0/2] A couple of minor RAOP fixes
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH] raop: add compatibility with openssl 1.1.0
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• json libraries
  • From: kugel@xxxxxxxxxxx (Thomas Martitz)
• json libraries
  • From: arun@xxxxxxxxxxxxxxxx (Arun Raghavan)
• [PATCH] raop: add compatibility with openssl 1.1.0
  • From: glance@xxxxxxxxxx (Anton Lundin)
• [PATCH v7 33/33] raop: Fix #37: OOB access in rtsp_auth_cb
  • From: crisp.fujita@xxxxxxxxx (Hajime Fujita)
• [PATCH v7 32/33] raop: Fix #36: invalid access to freed object
  • From: crisp.fujita@xxxxxxxxx (Hajime Fujita)
• [PATCH v7 31/33] raop: Fix memory leaks
  • From: crisp.fujita@xxxxxxxxx (Hajime Fujita)
• [PATCH v7 30/33] raop: Discard data upon getting EAGAIN on a socket
  • From: crisp.fujita@xxxxxxxxx (Hajime Fujita)
• [PATCH v7 29/33] raop: Disable is_recording flag when tearing down the connection
  • From: crisp.fujita@xxxxxxxxx (Hajime Fujita)
• [PATCH v7 28/33] raop: Stop recording when RTSP FLUSH is issued
  • From: crisp.fujita@xxxxxxxxx (Hajime Fujita)
• [PATCH v7 27/33] raop: Add back initial volume RTSP SET_PARAMETER request on connect
  • From: crisp.fujita@xxxxxxxxx (Hajime Fujita)
• [PATCH v7 26/33] raop: Silently drop out-of-history retransmission request
  • From: crisp.fujita@xxxxxxxxx (Hajime Fujita)
• [PATCH v7 25/33] raop: Correctly wrap RTP packet sequence number
  • From: crisp.fujita@xxxxxxxxx (Hajime Fujita)
• [PATCH v7 24/33] raop: Add IPv6 support
  • From: crisp.fujita@xxxxxxxxx (Hajime Fujita)
• [PATCH v7 23/33] raop: Add address to RAOP device description
  • From: crisp.fujita@xxxxxxxxx (Hajime Fujita)
• [PATCH v7 22/33] raop: Do not flush when RTSP object is not ready
  • From: crisp.fujita@xxxxxxxxx (Hajime Fujita)
• [PATCH v7 21/33] raop: Fix packet retransmission
  • From: crisp.fujita@xxxxxxxxx (Hajime Fujita)
• [PATCH v7 20/33] raop: fix typos
  • From: crisp.fujita@xxxxxxxxx (Hajime Fujita)
• [PATCH v7 19/33] raop: fix sequence number overflow
  • From: crisp.fujita@xxxxxxxxx (Hajime Fujita)
• [PATCH v7 18/33] raop: Fix sink getting destroyed after one use
  • From: crisp.fujita@xxxxxxxxx (Hajime Fujita)
• [PATCH v7 17/33] raop: Remove unimplemented code (PCM and AAC)
  • From: crisp.fujita@xxxxxxxxx (Hajime Fujita)
• [PATCH v7 16/33] raop: Rework packet's store memory management
  • From: crisp.fujita@xxxxxxxxx (Hajime Fujita)
• [PATCH v7 15/33] raop: Update and standardise source file headers
  • From: crisp.fujita@xxxxxxxxx (Hajime Fujita)
• [PATCH v7 14/33] raop: Prefer ALAC encoding to raw PCM if supported by server
  • From: crisp.fujita@xxxxxxxxx (Hajime Fujita)
• [PATCH v7 13/33] raop: Merge TCP and UDP code paths + refactoring
  • From: crisp.fujita@xxxxxxxxx (Hajime Fujita)
• [PATCH v7 12/33] raop: Add BA (Basic) and DA (Digest) HTTP authentication helpers
  • From: crisp.fujita@xxxxxxxxx (Hajime Fujita)
• [PATCH v7 11/33] raop: Add a MD5 hashing fuction
  • From: crisp.fujita@xxxxxxxxx (Hajime Fujita)
• [PATCH v7 10/33] raop: Move base64 implementation to a util file
  • From: crisp.fujita@xxxxxxxxx (Hajime Fujita)
• [PATCH v7 09/33] raop: Extract encryption related code into a separate file
  • From: crisp.fujita@xxxxxxxxx (Hajime Fujita)
• [PATCH v7 08/33] raop: Better playback resume handling
  • From: crisp.fujita@xxxxxxxxx (Hajime Fujita)
• [PATCH v7 07/33] raop: Do not send audio before RECORD response
  • From: crisp.fujita@xxxxxxxxx (Hajime Fujita)
• [PATCH v7 06/33] raop: Packet retransmission support for UDP
  • From: crisp.fujita@xxxxxxxxx (Hajime Fujita)
• [PATCH v7 05/33] raop: Parse server capabilities on discovery
  • From: crisp.fujita@xxxxxxxxx (Hajime Fujita)
• [PATCH v7 04/33] raop: Add UDP protocol handling
  • From: crisp.fujita@xxxxxxxxx (Hajime Fujita)
• [PATCH v7 03/33] pulsecore: Do in-place search in pa_str_in_list_spaces
  • From: crisp.fujita@xxxxxxxxx (Hajime Fujita)
• [PATCH v7 02/33] pulsecore: Add pa_split_space_in_place function
  • From: crisp.fujita@xxxxxxxxx (Hajime Fujita)
• [PATCH v7 01/33] pulsecore: Add pa_strneq macro
  • From: crisp.fujita@xxxxxxxxx (Hajime Fujita)
• [PATCH v7 00/33] raop2 support for module-raop-sink
  • From: crisp.fujita@xxxxxxxxx (Hajime Fujita)
• Revisiting raop2 patches
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• Revisiting raop2 patches
  • From: crisp.fujita@xxxxxxxxx (Hajime Fujita)
• Revisiting raop2 patches
  • From: crisp.fujita@xxxxxxxxx (Hajime Fujita)
• [PATCH] Added fixed port (46400) option for rtp sender
  • From: pulseaudio-discuss@xxxxxxxxxxx (NicoHood)
• [PATCH] Added fixed port (46400) option for rtp sender
  • From: remi@xxxxxxxxxx (Rémi Denis-Courmont)
• [PATCH] Added fixed port (46400) option for rtp sender
  • From: git@xxxxxxxxxxx (NicoHood)
• [PATCH v3 2/2] raop: add error handling to rsa_encrypt()
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH v3 1/2] raop: add compatibility with openssl 1.1.0
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH v3 2/2] raop: add error handling to rsa_encrypt()
  • From: fsateler@xxxxxxxxxx (Felipe Sateler)
• [PATCH v3 1/2] raop: add compatibility with openssl 1.1.0
  • From: fsateler@xxxxxxxxxx (Felipe Sateler)
• [PATCH v3 2/2] raop: add error handling to rsa_encrypt()
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH v3 2/2] raop: add error handling to rsa_encrypt()
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH v3 1/2] raop: add compatibility with openssl 1.1.0
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH v3 0/2] A couple of RAOP improvements
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• json libraries
  • From: pmeerw@xxxxxxxxxx (Peter Meerwald-Stadler)
• Thinking about pulseaudio for debian stretch
  • From: fsateler@xxxxxxxxxx (Felipe Sateler)
• Thinking about pulseaudio for debian stretch
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH v2] raop: add compatibility with openssl 1.1.0
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• Thinking about pulseaudio for debian stretch
  • From: fsateler@xxxxxxxxxx (Felipe Sateler)
• [PATCH v2] raop: add compatibility with openssl 1.1.0
  • From: fsateler@xxxxxxxxxx (Felipe Sateler)
• [PATCH v2] raop: add compatibility with openssl 1.1.0
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH] raop: add compatibility with openssl 1.1.0
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH] raop: add compatibility with openssl 1.1.0
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH] raop: add compatibility with openssl 1.1.0
  • From: patrakov@xxxxxxxxx (Alexander E. Patrakov)
• [PATCH] raop: add compatibility with openssl 1.1.0
  • From: fsateler@xxxxxxxxxx (Felipe Sateler)
• paprefs port setting *patch*
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• paprefs port setting *patch*
  • From: pulseaudio-discuss@xxxxxxxxxxx (Nico)
• paprefs port setting *patch*
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• paprefs port setting *patch*
  • From: pulseaudio-discuss@xxxxxxxxxxx (Nico)
• paprefs port setting
  • From: pulseaudio-discuss@xxxxxxxxxxx (Nico)
• paprefs port setting
  • From: pulseaudio-discuss@xxxxxxxxxxx (Nico)
• pa_context_set_source_volume_by_index() failed
  • From: pfl@xxxxxxxxxxx (pfl)
• paprefs port setting
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• paprefs port setting
  • From: pulseaudio-discuss@xxxxxxxxxxx (Nico)
• pa_context_set_source_volume_by_index() failed
  • From: sean@xxxxxxxxxxxxxxxxxx (Sean Greenslade)
• pa_context_set_source_volume_by_index() failed
  • From: pfl@xxxxxxxxxxx (pfl)
• paprefs port setting
  • From: pulseaudio-discuss@xxxxxxxxxxx (Nico)
• paprefs port setting
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• RME Babyface Pro: How do I get pulseaudio to see output 3/4?
  • From: allan@xxxxxxxxx (Allan Wind)
• paprefs port setting
  • From: pulseaudio-discuss@xxxxxxxxxxx (NicoHood)
• RME Babyface Pro: How do I get pulseaudio to see output 3/4?
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• pa_context_set_source_volume_by_index() failed
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• Characterizing webrtc aec with pre-recorded files
  • From: arun@xxxxxxxxxxxxxxxx (Arun Raghavan)
• Revisiting raop2 patches
  • From: glance@xxxxxxxxxx (Anton Lundin)
• Revisiting raop2 patches
  • From: crisp.fujita@xxxxxxxxx (Hajime Fujita)
• RME Babyface Pro: How do I get pulseaudio to see output 3/4?
  • From: allan@xxxxxxxxx (Allan Wind)
• pa_context_set_source_volume_by_index() failed
  • From: pfl@xxxxxxxxxxx (pfl)
• pa_context_set_source_volume_by_index() failed
  • From: pfl@xxxxxxxxxxx (pfl)
• State not restored in system mode
  • From: mailinglists@xxxxxx (Florian Lindner)
• [PATCH] bluetooth: assert that dbus_message_iter_append_basic() doesn't fail
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• pa_context_set_source_volume_by_index() failed
  • From: pfl@xxxxxxxxxxx (pfl)
• pa_context_set_source_volume_by_index() failed
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• pa_context_set_source_volume_by_index() failed
  • From: pfl@xxxxxxxxxxx (pfl)
• Notification on default sink changes
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH] thread-mainloop: fix volatile use in example
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• pa_context_set_source_volume_by_index() failed
  • From: pfl@xxxxxxxxxxx (pfl)
• pa_context_set_source_volume_by_index() failed
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• pa_context_set_source_volume_by_index() failed
  • From: pfl@xxxxxxxxxxx (pfl)
• Characterizing webrtc aec with pre-recorded files
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• Notification on default sink changes
  • From: pkern@xxxxxxxxxx (Philipp Kern)
• RME Babyface Pro: How do I get pulseaudio to see output 3/4?
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• pa_context_set_source_volume_by_index() failed
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• Characterizing webrtc aec with pre-recorded files
  • From: nick.gart@xxxxxxxxx (N G)
• RME Babyface Pro: How do I get pulseaudio to see output 3/4?
  • From: allan@xxxxxxxxx (Allan Wind)
• RME Babyface Pro: How do I get pulseaudio to see output 3/4?
  • From: allan@xxxxxxxxx (Allan Wind)
• pa_context_set_source_volume_by_index() failed
  • From: pfl@xxxxxxxxxxx (pfl)
• [PATCH 2/2] system.pa: load module-card-restore
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH 1/2] system.pa: load module-device-restore before module-udev-detect
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• State not restored in system mode
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• pa_context_set_source_volume_by_index() failed
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• RME Babyface Pro: How do I get pulseaudio to see output 3/4?
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• Revisiting raop2 patches
  • From: crisp.fujita@xxxxxxxxx (Hajime Fujita)
• I'm on Patreon now
  • From: arun@xxxxxxxxxxxxxxxx (Arun Raghavan)
• [PATCH v4] bluetooth: Add optional heuristic for switching between hsp and a2dp profiles
  • From: arun@xxxxxxxxxxxxxxxx (Arun Raghavan)
• State not restored in system mode
  • From: mailinglists@xxxxxx (Florian Lindner)
• Revisiting raop2 patches
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• pa_context_set_source_volume_by_index() failed
  • From: pfl@xxxxxxxxxxx (pfl)
• [PATCH] raop: Correct spelling of KTH
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• pa_context_set_source_volume_by_index() failed
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• pa_context_set_source_volume_by_index() failed
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• pa_context_set_source_volume_by_index() failed
  • From: pfl@xxxxxxxxxxx (pfl)
• pa_context_set_source_volume_by_index() failed
  • From: pfl@xxxxxxxxxxx (pfl)
• pa_context_set_source_volume_by_index() failed
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• I'm on Patreon now
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• RME Babyface Pro: How do I get pulseaudio to see output 3/4?
  • From: allan@xxxxxxxxx (Allan Wind)
• Revisiting raop2 patches
  • From: glance@xxxxxxxxxx (Anton Lundin)
• [PATCH] raop: Correct spelling of KTH
  • From: glance@xxxxxxxxxx (Anton Lundin)
• pa_context_set_source_volume_by_index() failed
  • From: pfl@xxxxxxxxxxx (pfl)
• Revisiting raop2 patches
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• RME Babyface Pro: How do I get pulseaudio to see output 3/4?
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH] move streams when the default sink or source changes
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• Revisiting raop2 patches
  • From: crisp.fujita@xxxxxxxxx (Hajime Fujita)
• Revisiting raop2 patches
  • From: glance@xxxxxxxxxx (Anton Lundin)
• Revisiting raop2 patches
  • From: colin@xxxxxxxxxx (Colin Leroy)
• Revisiting raop2 patches
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• Upgrading a pa script from Ubuntu 12.04 to 16.10
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• Digital input on Creative Sound Blaster X-FI HD
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• Make pulseaudio the default alsa device
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• RME Babyface Pro: How do I get pulseaudio to see output 3/4?
  • From: allan@xxxxxxxxx (Allan Wind)
• Revisiting raop2 patches
  • From: colin@xxxxxxxxxx (Colin Leroy)
• SUN Station with ULTRA SPARC III processor
  • From: glance@xxxxxxxxxx (Anton Lundin)
• Revisiting raop2 patches
  • From: crisp.fujita@xxxxxxxxx (Hajime Fujita)
• Upgrading a pa script from Ubuntu 12.04 to 16.10
  • From: josephj@xxxxxxxxxx (Joe)
• [PATCH v4] bluetooth: Add optional heuristic for switching between hsp and a2dp profiles
  • From: pali.rohar@xxxxxxxxx (Pali Rohár)
• Digital input on Creative Sound Blaster X-FI HD
  • From: oddbjorn@xxxxxxxxxxxxxxxxx (Oddbjørn Norstrand)
• Make pulseaudio the default alsa device
  • From: fsateler@xxxxxxxxxx (Felipe Sateler)
• Digital input on Creative Sound Blaster X-FI HD
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• Make pulseaudio the default alsa device
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• State not restored in system mode
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• Digital input on Creative Sound Blaster X-FI HD
  • From: oddbjorn@xxxxxxxxxxxxxxxxx (Oddbjørn Norstrand)
• Make pulseaudio the default alsa device
  • From: fsateler@xxxxxxxxxx (Felipe Sateler)
• Make pulseaudio the default alsa device
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• pulseaudio creates null-sink and crashes
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• State not restored in system mode
  • From: mailinglists@xxxxxx (Florian Lindner)
• Make pulseaudio the default alsa device (Was: LADSPA Per Channel\Audio Woes)
  • From: fsateler@xxxxxxxxxx (Felipe Sateler)
• Make pulseaudio the default alsa device (Was: LADSPA Per Channel\Audio Woes)
  • From: fsateler@xxxxxxxxxx (Felipe Sateler)
• pulseaudio creates null-sink and crashes
  • From: marcotrapanese@xxxxxxxxx (Marco Trapanese)
• pulseaudio creates null-sink and crashes
  • From: marcotrapanese@xxxxxxxxx (Marco Trapanese)
• pulseaudio creates null-sink and crashes
  • From: marcotrapanese@xxxxxxxxx (Marco Trapanese)
• Make pulseaudio the default alsa device (Was: LADSPA Per Channel\Audio Woes)
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• pulseaudio creates null-sink and crashes
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• Make pulseaudio the default alsa device (Was: LADSPA Per Channel\Audio Woes)
  • From: fsateler@xxxxxxxxxx (Felipe Sateler)
• LADSPA Per Channel\Audio Woes
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• pulseaudio creates null-sink and crashes
  • From: georg@xxxxxxxx (Georg Chini)
• pulseaudio creates null-sink and crashes
  • From: marcotrapanese@xxxxxxxxx (Marco Trapanese)
• [PATCH] udev-detect: don't use readdir_r(), it's deprecated
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• LADSPA Per Channel\Audio Woes
  • From: dylanetaft@xxxxxxxxx (Dylan Taft)
• How to prevent startup of PulseAudio in Solaris v11?
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• LADSPA Per Channel\Audio Woes
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• How to prevent startup of PulseAudio in Solaris v11?
  • From: bxstover@xxxxxxxxxxx (Ben Stover)
• LADSPA Per Channel\Audio Woes
  • From: dylanetaft@xxxxxxxxx (Dylan Taft)
• LADSPA Per Channel\Audio Woes
  • From: dylanetaft@xxxxxxxxx (Dylan Taft)
• [PATCH 3/3] sink-input, source-output: set sink/source to NULL before the "unlink post" hook
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH 2/3] suspend-on-idle: use earlier (safer) hooks for stream unlink notifications
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH 1/3] bluetooth-policy: do A2DP profile restoring a bit later
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH 0/3] Fix a crash, and then another crash
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• Pulseaudio “Snd_PCM_delay” not returing correct value and false underrun is reported
  • From: Vikrant.Bhangay@xxxxxxxx (Vikrant Bhangay)
• [PATCH] bluetooth: allow UTF-8 in device descriptions
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• jack modules problem with idjc
  • From: per.gunnarsson@xxxxxxxxxxxxxxxx (Per Gunnarsson)
• jack modules problem with idjc
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• Select audio input for HFP calls
  • From: marcotrapanese@xxxxxxxxx (Marco Trapanese)
• Select audio input for HFP calls
  • From: georg@xxxxxxxx (Georg Chini)
• Select audio input for HFP calls
  • From: georg@xxxxxxxx (Georg Chini)
• Select audio input for HFP calls
  • From: marcotrapanese@xxxxxxxxx (Marco Trapanese)
• Service File for running in system mode
  • From: mailinglists@xxxxxx (Florian Lindner)
• jack modules problem with idjc
  • From: per.gunnarsson@xxxxxxxxxxxxxxxx (Per Gunnarsson)
• jack modules problem with idjc
  • From: per.gunnarsson@xxxxxxxxxxxxxxxx (Per Gunnarsson)
• a2dp output device
  • From: ma.czerski@xxxxxxxxx (Marek Czerski)
• a2dp output device
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• a2dp output device
  • From: ma.czerski@xxxxxxxxx (Marek Czerski)
• Service File for running in system mode
  • From: fsateler@xxxxxxxxxx (Felipe Sateler)
• Service File for running in system mode
  • From: mailinglists@xxxxxx (Florian Lindner)
• yet another HFP problem
  • From: marcotrapanese@xxxxxxxxx (Marco Trapanese)
• [PATCH] module-gsettings: new module to store configuration using gsettings
  • From: fsateler@xxxxxxxxxx (Felipe Sateler)
• [PATCH] module-gsettings: new module to store configuration using gsettings
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• Issues playing audio to headset, HSP Role. A2DP works fine
  • From: brandon.schaefer@xxxxxxxxxxxxxxxxx (Schaefer, Brandon)
• Service File for running in system mode
  • From: fsateler@xxxxxxxxxx (Felipe Sateler)
• Service File for running in system mode
  • From: mailinglists@xxxxxx (Florian Lindner)
• [PATCH] module-gsettings: new module to store configuration using gsettings
  • From: fsateler@xxxxxxxxxx (Felipe Sateler)
• problem with volume control messed up
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH] module-gsettings: new module to store configuration using gsettings
  • From: lebauce@xxxxxxxxx (Sylvain Baubeau)
• Service File for running in system mode
  • From: fsateler@xxxxxxxxxx (Felipe Sateler)
• Service File for running in system mode
  • From: mailinglists@xxxxxx (Florian Lindner)
• Service File for running in system mode
  • From: mailinglists@xxxxxx (Florian Lindner)
• Service File for running in system mode
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH] module-gsettings: new module to store configuration using gsettings
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• PA 9.0, Failed to create secure directory
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• why isn't PA using hardware volume controls?
  • From: eac@xxxxxxxxxxxxxxx (Ernest Adrogué)
• why isn't PA using hardware volume controls?
  • From: eac@xxxxxxxxxxxxxxx (Ernest Adrogué)
• [PATCH] module-gsettings: new module to store configuration using gsettings
  • From: lebauce@xxxxxxxxx (Sylvain Baubeau)
• Alsa with UCM, input device-based jack detection
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• ALSA with UCM, localized names, nice icons and form factor
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• problem with volume control messed up
  • From: eac@xxxxxxxxxxxxxxx (Ernest Adrogué)
• Service File for running in system mode
  • From: mailinglists@xxxxxx (Florian Lindner)
• sound volume for recording
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH] module-gsettings: new module to store configuration using gsettings
  • From: fsateler@xxxxxxxxxx (Felipe Sateler)
• PA 9.0, Failed to create secure directory
  • From: jagauthier@xxxxxxxxx (Jason Gauthier)
• [PATCH] module-gsettings: new module to store configuration using gsettings
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• Network dropout only at beginning of song
  • From: mailinglists@xxxxxx (Florian Lindner)
• Remix to LFE and front-center
  • From: dagofthedofg@xxxxxxxxx (dag dg)
• [PATCH] bluetooth: Add support for automatic switch between hsp and a2dp profiles also for bluez5
  • From: arun@xxxxxxxxxxxxxxxx (Arun Raghavan)
• Alsa with UCM, input device-based jack detection
  • From: contact@xxxxxxxx (Paul Kocialkowski)
• ALSA with UCM, localized names, nice icons and form factor
  • From: contact@xxxxxxxx (Paul Kocialkowski)
• Master is frozen
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• sound volume for recording
  • From: suseuser04@xxxxxxxxxxx (Istvan Gabor)
• [PATCH 2/2] build-sys: bump minor gettext version to 0.18.2
  • From: fsateler@xxxxxxxxxx (Felipe Sateler)
• [PATCH 1/2] build-sys: use AC_USE_SYSTEM_EXCEPTIONS before trying to compile anything
  • From: fsateler@xxxxxxxxxx (Felipe Sateler)
• [PATCH] module-gsettings: new module to store configuration using gsettings
  • From: lebauce@xxxxxxxxx (Sylvain Baubeau)
• [PATCH] module: postpone lt_dlclose() until a safe time
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• 98766: Bug and bounty to improve HDMI handling in PA
  • From: rudd-o@xxxxxxxxxx (Manuel Amador (Rudd-O))
• 98766: Bug and bounty to improve HDMI handling in PA
  • From: rudd-o@xxxxxxxxxx (Manuel Amador (Rudd-O))
• Network dropout only at beginning of song
  • From: mailinglists@xxxxxx (Florian Lindner)
• 98766: Bug and bounty to improve HDMI handling in PA
  • From: fsateler@xxxxxxxxxx (Felipe Sateler)
• 98766: Bug and bounty to improve HDMI handling in PA
  • From: rudd-o@xxxxxxxxxx (Manuel Amador (Rudd-O))
• [PATCH] rtp: don't use memblocks for non-audio data
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• Overrun in Pulseaudio8.0 when switching endpoints
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH] xen: Fixed possible memory leak.
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• How do I read my microphone's source levels from the cmdline?
  • From: sean@xxxxxxxxxxxxxxxxxx (Sean Greenslade)
• How do I read my microphone's source levels from the cmdline?
  • From: kai.hendry@xxxxxxxxx (Kai Hendry)
• 98766: Bug and bounty to improve HDMI handling in PA
  • From: rudd-o@xxxxxxxxxx (Manuel Amador (Rudd-O))
• [PATCH v4] bluetooth: Add optional heuristic for switching between hsp and a2dp profiles
  • From: pali.rohar@xxxxxxxxx (Pali Rohár)
• Overrun in Pulseaudio8.0 when switching endpoints
  • From: sharmafrequent@xxxxxxxxx (Nishit Sharma)
• [PATCH] xen: Fixed possible memory leak.
  • From: srivastava.d@xxxxxxxxxxx (Deepak Srivastava)
• Overrun in Pulseaudio8.0 when switching endpoints
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• Endpoints switching rules
  • From: sharmafrequent@xxxxxxxxx (Nishit Sharma)
• Overrun in Pulseaudio8.0 when switching endpoints
  • From: sharmafrequent@xxxxxxxxx (Nishit Sharma)
• [PATCH] bluetooth: bluez5: Add profile name to sinks and sources
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• Overrun in Pulseaudio8.0 when switching endpoints
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• Endpoints switching rules
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• sound volume for recording
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• Overrun in Pulseaudio8.0 when switching endpoints
  • From: sharmafrequent@xxxxxxxxx (Nishit Sharma)
• sound volume for recording
  • From: suseuser04@xxxxxxxxxxx (Istvan Gabor)
• SUN Station with ULTRA SPARC III processor
  • From: pulseaudio@xxxxxxxxxx (Ulrich Eckhardt)
• Endpoints switching rules
  • From: sharmafrequent@xxxxxxxxx (Nishit Sharma)
• [PATCH] bluetooth: bluez5: Add profile name to sinks and sources
  • From: pali.rohar@xxxxxxxxx (Pali Rohár)
• Endpoints switching rules
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH] bluetooth: Add support for automatic switch between hsp and a2dp profiles also for bluez5
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH] bluetooth: Add support for automatic switch between hsp and a2dp profiles also for bluez5
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• Freeze coming soon
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• Endpoints switching rules
  • From: sharmafrequent@xxxxxxxxx (Nishit Sharma)
• module-bluetooth-policy : How to use auto switch profile?
  • From: greegthegeek@xxxxxxxxx (Greg)
• module-bluetooth-policy : How to use auto switch profile?
  • From: pali.rohar@xxxxxxxxx (Pali Rohár)
• SUN Station with ULTRA SPARC III processor
  • From: amar.mouffok@xxxxxxxxxxxxxx (MOUFFOK Amar)
• [PATCH] don't assume that pa_asyncq_new() always succeeds
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH] thread-mq: create event on the right mainloop
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH] bluetooth: Add support for automatic switch between hsp and a2dp profiles also for bluez5
  • From: pali.rohar@xxxxxxxxx (Pali Rohár)
• [PATCH v4] bluetooth: Add optional heuristic for switching between hsp and a2dp profiles
  • From: pali.rohar@xxxxxxxxx (Pali Rohár)
• Multi user access to PulseAudio
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• Multi user access to PulseAudio
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• Multi user access to PulseAudio
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• Multi user access to PulseAudio
  • From: pali.rohar@xxxxxxxxx (Pali Rohár)
• Multi user access to PulseAudio
  • From: dev@xxxxxxxxxx (Ralph Benzinger)
• Multi user access to PulseAudio
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• Multi user access to PulseAudio
  • From: dev@xxxxxxxxxx (Ralph Benzinger)
• How do I read my microphone's source levels from the cmdline?
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• How do I read my microphone's source levels from the cmdline?
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• How do I read my microphone's source levels from the cmdline?
  • From: kai.hendry@xxxxxxxxx (Kai Hendry)
• [PATCH] module-gsettings: new module to store configuration using gsettings
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH] module-gsettings: new module to store configuration using gsettings
  • From: arun@xxxxxxxxxxxxxxxx (Arun Raghavan)
• Multi Workstation Single Home Directory NFS Mount
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• Multi Workstation Single Home Directory NFS Mount
  • From: fft2048@xxxxxxxxx (rjs)
• [PATCH] module-gsettings: new module to store configuration using gsettings
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH] module-gsettings: new module to store configuration using gsettings
  • From: arun@xxxxxxxxxxxxxxxx (Arun Raghavan)
• [PATCH] launch: Remove the already implicit After=pulseaudio.socket
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH] raop: add compatibility with openssl 1.1.0
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH] module-gsettings: new module to store configuration using gsettings
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH] module-gsettings: new module to store configuration using gsettings
  • From: arun@xxxxxxxxxxxxxxxx (Arun Raghavan)
• [PATCH] launch: Remove the already implicit After=pulseaudio.socket
  • From: jan.steffens@xxxxxxxxx (Jan Alexander Steffens (heftig))
• [PATCH] module-gsettings: new module to store configuration using gsettings
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH] daemon-conf: enable memfd by default
  • From: arun@xxxxxxxxxxxxxxxx (Arun Raghavan)
• Multi Workstation Single Home Directory NFS Mount
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• Multi Workstation Single Home Directory NFS Mount
  • From: fft2048@xxxxxxxxx (rjs)
• [PATCH] daemon-conf: enable memfd by default
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH 2/3] core, device-port: check availability when choosing the default device
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH 2/3] core, device-port: check availability when choosing the default device
  • From: patrakov@xxxxxxxxx (Alexander E. Patrakov)
• [PATCH 3/3] sink, source: copy priority from active port
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH 2/3] core, device-port: check availability when choosing the default device
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH 1/3] refactor default sink/source handling
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH 0/3] Improve default device policy
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• Pulseaudio and bluetooth - first instanz grabs bt-device
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH webrtc-audio-processing] webrtc/typedefs.h: make the code more architecture-generic
  • From: mail@xxxxxxxxxxxxxxxx (Arun Raghavan)
• [PATCH v6 25/25] loopback: Add log_interval parameter
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH v6 25/25] loopback: Add log_interval parameter
  • From: georg@xxxxxxxx (Georg Chini)
• Pulseaudio and bluetooth - first instanz grabs bt-device
  • From: wertstoffe@xxxxxxxxxxxxxx (Jakob Schürz)
• [PATCH v6 25/25] loopback: Add log_interval parameter
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH v6 24/25] loopback: Add adjust_threshold_usec parameter
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH v6 23/25] loopback: Add low_device_latency parameter
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH v2 0/6] Coverity cleanups
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• Proper way for a server to spawn Pulseaudio?
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH v4] Use local icon for zeroconf shared devices
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH v6 22/25] loopback: Allow shorter adjust_time
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• module-bluetooth-policy : How to use auto switch profile?
  • From: greegthegeek@xxxxxxxxx (Greg)
• module-bluetooth-policy : How to use auto switch profile?
  • From: pali.rohar@xxxxxxxxx (Pali Rohár)
• module-bluetooth-policy : How to use auto switch profile?
  • From: greegthegeek@xxxxxxxxx (Greg)
• module-bluetooth-policy : How to use auto switch profile?
  • From: pali.rohar@xxxxxxxxx (Pali Rohár)
• module-bluetooth-policy : How to use auto switch profile?
  • From: greegthegeek@xxxxxxxxx (Greg)
• module-bluetooth-policy : How to use auto switch profile?
  • From: pali.rohar@xxxxxxxxx (Pali Rohár)
• [Support] TJ's console speech question (fwd)
  • From: jdashiel@xxxxxxxxx (Jude DaShiell)
• [Support] TJ's console speech question (fwd)
  • From: jdashiel@xxxxxxxxx (Jude DaShiell)
• [PATCH v2 0/6] Coverity cleanups
  • From: pmeerw@xxxxxxxxxx (Peter Meerwald-Stadler)
• HCI ACL packet data size
  • From: marcotrapanese@xxxxxxxxx (Marco Trapanese)
• module-bluetooth-policy : How to use auto switch profile?
  • From: greegthegeek@xxxxxxxxx (Greg)
• I made a Qt5 port for pavucontrol
  • From: pcman.tw@xxxxxxxxx (PCMan)
• Proper way for a server to spawn Pulseaudio?
  • From: espen@xxxxxxxxxxxx (Espen Jürgensen)
• [PATCH v4] Use local icon for zeroconf shared devices
  • From: lebauce@xxxxxxxxx (Sylvain Baubeau)
• [PATCH v3] Use local icon for zeroconf shared devices
  • From: lebauce@xxxxxxxxx (Sylvain Baubeau)
• Proper way for a server to spawn Pulseaudio?
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• Proper way for a server to spawn Pulseaudio?
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH v3] Use local icon for zeroconf shared devices
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• Proper way for a server to spawn Pulseaudio?
  • From: espen@xxxxxxxxxxxx (Espen Jürgensen)
• [PATCH] Use local icon for zeroconf shared devices
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH v2 0/6] Coverity cleanups
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH v2 4/6] source-output: Avoid potential NULL dereference
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH] Use local icon for zeroconf shared devices
  • From: lebauce@xxxxxxxxx (Sylvain Baubeau)
• [PATCH v3] Use local icon for zeroconf shared devices
  • From: lebauce@xxxxxxxxx (Sylvain Baubeau)
• [PATCH v2] Use local icon for zeroconf shared devices
  • From: lebauce@xxxxxxxxx (Sylvain Baubeau)
• [PATCH] Use local icon for zeroconf shared devices
  • From: lebauce@xxxxxxxxx (Sylvain Baubeau)
• [PATCH v2 6/6] sample: RFC: Assert validity of sample_spec
  • From: pmeerw@xxxxxxxxxx (Peter Meerwald-Stadler)
• [PATCH v2 5/6] sink-input: Avoid potential NULL dereference
  • From: pmeerw@xxxxxxxxxx (Peter Meerwald-Stadler)
• [PATCH v2 4/6] source-output: Avoid potential NULL dereference
  • From: pmeerw@xxxxxxxxxx (Peter Meerwald-Stadler)
• [PATCH v2 3/6] tests: Assert granularity range in stripnul.c
  • From: pmeerw@xxxxxxxxxx (Peter Meerwald-Stadler)
• [PATCH v2 2/6] core: Replace PA_PAGE_SIZE with pa_page_size()
  • From: pmeerw@xxxxxxxxxx (Peter Meerwald-Stadler)
• [PATCH v2 1/6] padsp: Fix flush and improve error handling
  • From: pmeerw@xxxxxxxxxx (Peter Meerwald-Stadler)
• [PATCH v2 0/6] Coverity cleanups
  • From: pmeerw@xxxxxxxxxx (Peter Meerwald-Stadler)
• Bluetooth problem (fwd)
  • From: jdashiel@xxxxxxxxx (Jude DaShiell)
• Bluetooth problem (fwd)
  • From: jdashiel@xxxxxxxxx (Jude DaShiell)
• [PATCH] Use local icon for zeroconf shared devices
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH v2 3/3] bluetooth: add correct HFP rfcomm negotiation
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH v2 5/5] sink-input: Remove pa_sink_input_set_volume_ramp()
  • From: sangchul1011@xxxxxxxxx (Sangchul Lee)
• [PATCH v2 4/5] sink-input, volume: Add support for volume ramp factor
  • From: sangchul1011@xxxxxxxxx (Sangchul Lee)
• [PATCH v2 3/5] sink-input: Code cleanup regarding volume ramping
  • From: sangchul1011@xxxxxxxxx (Sangchul Lee)
• [PATCH v2 2/5] volume ramp: adding volume ramping to sink-input
  • From: sangchul1011@xxxxxxxxx (Sangchul Lee)
• [PATCH v2 1/5] volume ramp: additions to the low level infra
  • From: sangchul1011@xxxxxxxxx (Sangchul Lee)
• [PATCH v2 0/5] volume ramping
  • From: sangchul1011@xxxxxxxxx (Sangchul Lee)
• issue with audio over headset_head_unit
  • From: arun@xxxxxxxxxxxxxxxx (Arun Raghavan)
• [PATCH] Use local icon for zeroconf shared devices
  • From: lebauce@xxxxxxxxx (Sylvain Baubeau)
• [PATCH v2 3/3] bluetooth: add correct HFP rfcomm negotiation
  • From: James.Bottomley@xxxxxxxxxxxxxxxxxxxxx (James Bottomley)
• issue with audio over headset_head_unit
  • From: anand.nekkunti@xxxxxxxxxxxxxxx (Anand Nekkunti)
• issue with audio over headset_head_unit
  • From: James.Bottomley@xxxxxxxxxxxxxxxxxxxxx (James Bottomley)
• issue with audio over headset_head_unit
  • From: arun@xxxxxxxxxxxxxxxx (Arun Raghavan)
• issue with audio over headset_head_unit
  • From: anand.nekkunti@xxxxxxxxxxxxxxx (Anand Nekkunti)
• [PATCH v6 21/25] loopback: Track prediction error; debug and cosmetic changes
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH v6 20/25] loopback: Add latency prediction and Kalman filter
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• (no subject)
  • From: hui.xie19821112@xxxxxxxxxx (谢晖)
• Bluetooth Headset Problem with BlueZ-5.38 and Pulseaudio 8.0
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH v6 19/25] loopback: Implement adaptive re-sampling
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH v2 3/3] bluetooth: add correct HFP rfcomm negotiation
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• Bluetooth Headset Problem with BlueZ-5.38 and Pulseaudio 8.0
  • From: hieu.le@xxxxxxxxxxxxxxxx (Hieu Le)
• [PATCH v6 19/25] loopback: Implement adaptive re-sampling
  • From: georg@xxxxxxxx (Georg Chini)
• [PATCH v6 19/25] loopback: Implement adaptive re-sampling
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• Bluetooth Headset Problem with BlueZ-5.38 and Pulseaudio 8.0
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• Bluetooth Headset Problem with BlueZ-5.38 and Pulseaudio 8.0
  • From: hieu.le@xxxxxxxxxxxxxxxx (Hieu Le)
• [PATCH v2 3/3] bluetooth: add correct HFP rfcomm negotiation
  • From: James.Bottomley@xxxxxxxxxxxxxxxxxxxxx (James Bottomley)
• [PATCH] bluetooth: fix profile waiting logic
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH v2 2/3] bluetooth: separate HSP and HFP
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH v2 3/3] bluetooth: add correct HFP rfcomm negotiation
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• Bluetooth Headset Problem with BlueZ-5.38 and Pulseaudio 8.0
  • From: hieu.le@xxxxxxxxxxxxxxxx (Hieu Le)
• Bluetooth Headset Problem with BlueZ-5.38 and Pulseaudio 8.0
  • From: hieu.le@xxxxxxxxxxxxxxxx (Hieu Le)
• [PATCH v2 2/3] bluetooth: separate HSP and HFP
  • From: James.Bottomley@xxxxxxxxxxxxxxxxxxxxx (James Bottomley)
• [PATCH v2 3/3] bluetooth: add correct HFP rfcomm negotiation
  • From: James.Bottomley@xxxxxxxxxxxxxxxxxxxxx (James Bottomley)
• [PATCH v2 3/3] bluetooth: add correct HFP rfcomm negotiation
  • From: James.Bottomley@xxxxxxxxxxxxxxxxxxxxx (James Bottomley)
• [PATCH v2 3/3] bluetooth: add correct HFP rfcomm negotiation
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH v2 2/3] bluetooth: separate HSP and HFP
  • From: James.Bottomley@xxxxxxxxxxxxxxxxxxxxx (James Bottomley)
• [PATCH v2 2/3] bluetooth: separate HSP and HFP
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH v2 2/3] bluetooth: separate HSP and HFP
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH v2 3/3] bluetooth: add correct HFP rfcomm negotiation
  • From: James.Bottomley@xxxxxxxxxxxxxxxxxxxxx (James Bottomley)
• [PATCH v2 2/3] bluetooth: separate HSP and HFP
  • From: James.Bottomley@xxxxxxxxxxxxxxxxxxxxx (James Bottomley)
• [PATCH v2 1/3] bluetooth: use consistent profile names
  • From: James.Bottomley@xxxxxxxxxxxxxxxxxxxxx (James Bottomley)
• [PATCH v2 0/3] use bluetooth HFP in pulseaudio when available
  • From: James.Bottomley@xxxxxxxxxxxxxxxxxxxxx (James Bottomley)
• [PATCH] bluetooth: separate HSP and HFP
  • From: James.Bottomley@xxxxxxxxxxxxxxxxxxxxx (James Bottomley)
• [PATCH] bluetooth: separate HSP and HFP
  • From: johan.hedberg@xxxxxxxxx (Johan Hedberg)
• [PATCH] bluetooth: separate HSP and HFP
  • From: James.Bottomley@xxxxxxxxxxxxxxxxxxxxx (James Bottomley)
• [PATCH] bluetooth: separate HSP and HFP
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH] bluetooth: separate HSP and HFP
  • From: James.Bottomley@xxxxxxxxxxxxxxxxxxxxx (James Bottomley)
• [PATCH] bluetooth: separate HSP and HFP
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH] bluetooth: separate HSP and HFP
  • From: James.Bottomley@xxxxxxxxxxxxxxxxxxxxx (James Bottomley)
• [pulseaudio-discuss] [PATCH v6 18/25] loopback: Limit controller step size to 2.01‰
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [pulseaudio-discuss] [PATCH v6 18/25] loopback: Limit controller step size to 2.01‰
  • From: georg@xxxxxxxx (Georg Chini)
• [pulseaudio-discuss] [PATCH v6 18/25] loopback: Limit controller step size to 2.01‰
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH v6 17/25] loopback: Track and use average adjust time
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH v6 17/25] loopback: Track and use average adjust time
  • From: georg@xxxxxxxx (Georg Chini)
• Bluetooth Headset Problem with BlueZ-5.38 and Pulseaudio 8.0
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH v6 17/25] loopback: Track and use average adjust time
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• Bluetooth Headset Problem with BlueZ-5.38 and Pulseaudio 8.0
  • From: georg@xxxxxxxx (Georg Chini)
• Bluetooth Headset Problem with BlueZ-5.38 and Pulseaudio 8.0
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH webrtc-audio-processing] Proper detection of cxxabi.h and execinfo.h
  • From: mail@xxxxxxxxxxxxxxxx (Arun Raghavan)
• [PATCH] bluetooth: separate HSP and HFP
  • From: James.Bottomley@xxxxxxxxxxxxxxxxxxxxx (James Bottomley)
• [PATCH] bluetooth: separate HSP and HFP
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• update-card-properties? Possible?
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• Adding support for bluetooth headsets that only have HFP
  • From: James.Bottomley@xxxxxxxxxxxxxxxxxxxxx (James Bottomley)
• Adding support for bluetooth headsets that only have HFP
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH 6/6] sample: RFC: Assert validity of sample_spec
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH 5/6] sink-input: Avoid potential NULL dereference
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH 4/6] source-output: Avoid potential NULL dereference
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH 3/6] tests: Assert granularity range in stripnul.c
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH 2/6] core: PA_PAGE_SIZE using sysconf() may return a negative number
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH 1/6] padsp: Fix flush
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• Sink (input) format negotiation concept
  • From: arun@xxxxxxxxxxxxxxxx (Arun Raghavan)
• Sink (input) format negotiation concept
  • From: remi@xxxxxxxxxx (Rémi Denis-Courmont)
• Bluetooth Headset Problem with BlueZ-5.38 and Pulseaudio 8.0
  • From: hieu.le@xxxxxxxxxxxxxxxx (Hieu Le)
• Sink (input) format negotiation concept
  • From: arun@xxxxxxxxxxxxxxxx (Arun Raghavan)
• Sink (input) format negotiation concept
  • From: pierre-louis.bossart@xxxxxxxxxxxxxxx (Pierre-Louis Bossart)
• [PATCH] bluetooth: separate HSP and HFP
  • From: James.Bottomley@xxxxxxxxxxxxxxxxxxxxx (James Bottomley)
• [PATCH v6 14/25] source.c, sink.c: Implement pa_{source, sink}_get_raw_latency_within_thread() calls
  • From: georg@xxxxxxxx (Georg Chini)
• [PATCH v6 14/25] source.c, sink.c: Implement pa_{source, sink}_get_raw_latency_within_thread() calls
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• Sink (input) format negotiation concept
  • From: remi@xxxxxxxxxx (Rémi Denis-Courmont)
• [PATCH 6/6] sample: RFC: Assert validity of sample_spec
  • From: pmeerw@xxxxxxxxxx (Peter Meerwald-Stadler)
• [PATCH 5/6] sink-input: Avoid potential NULL dereference
  • From: pmeerw@xxxxxxxxxx (Peter Meerwald-Stadler)
• [PATCH 4/6] source-output: Avoid potential NULL dereference
  • From: pmeerw@xxxxxxxxxx (Peter Meerwald-Stadler)
• [PATCH 3/6] tests: Assert granularity range in stripnul.c
  • From: pmeerw@xxxxxxxxxx (Peter Meerwald-Stadler)
• [PATCH 2/6] core: PA_PAGE_SIZE using sysconf() may return a negative number
  • From: pmeerw@xxxxxxxxxx (Peter Meerwald-Stadler)
• [PATCH 1/6] padsp: Fix flush
  • From: pmeerw@xxxxxxxxxx (Peter Meerwald-Stadler)
• Adding support for bluetooth headsets that only have HFP
  • From: James.Bottomley@xxxxxxxxxxxxxxxxxxxxx (James Bottomley)
• update-card-properties? Possible?
  • From: bwechner@xxxxxxxxx (Bernd Wechner)
• update-card-properties? Possible?
  • From: diwic@xxxxxxxxxx (David Henningsson)
• update-card-properties? Possible?
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH v6 14/25] source.c, sink.c: Implement pa_{source, sink}_get_raw_latency_within_thread() calls
  • From: georg@xxxxxxxx (Georg Chini)
• [PATCH 1/2] bluetooth: Fix potential NULL pointer dereference
  • From: pmeerw@xxxxxxxxxx (Peter Meerwald-Stadler)
• [PATCH v6 14/25] source.c, sink.c: Implement pa_{source, sink}_get_raw_latency_within_thread() calls
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• Issue in libpulse crash for calc_next_timeout
  • From: dhananjayingroup@xxxxxxxxx (Dhananjay Joshi)
• [PATCH v2 2/2] bluetooth: Fix negative array index write
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH v2 1/2] bluetooth: Reorganize code to avoid Coverity NULL dereference warning
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH v6 14/25] source.c, sink.c: Implement pa_{source, sink}_get_raw_latency_within_thread() calls
  • From: georg@xxxxxxxx (Georg Chini)
• [PATCH 1/2] bluetooth: Fix potential NULL pointer dereference
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH v2 2/2] bluetooth: Fix negative array index write
  • From: pmeerw@xxxxxxxxxx (Peter Meerwald-Stadler)
• [PATCH v2 1/2] bluetooth: Reorganize code to avoid Coverity NULL dereference warning
  • From: pmeerw@xxxxxxxxxx (Peter Meerwald-Stadler)
• [PATCH 1/2] bluetooth: Fix potential NULL pointer dereference
  • From: pmeerw@xxxxxxxxxx (Peter Meerwald-Stadler)
• [PATCH v6 14/25] source.c, sink.c: Implement pa_{source, sink}_get_raw_latency_within_thread() calls
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH v6 16/25] loopback: Reset sink input rate when source or sink changes
  • From: georg@xxxxxxxx (Georg Chini)
• [PATCH v6 14/25] source.c, sink.c: Implement pa_{source, sink}_get_raw_latency_within_thread() calls
  • From: georg@xxxxxxxx (Georg Chini)
• update-card-properties? Possible?
  • From: bwechner@xxxxxxxxx (Bernd Wechner)
• [PATCH v6 16/25] loopback: Reset sink input rate when source or sink changes
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH v6 14/25] source.c, sink.c: Implement pa_{source, sink}_get_raw_latency_within_thread() calls
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH v6 16/25] loopback: Reset sink input rate when source or sink changes
  • From: georg@xxxxxxxx (Georg Chini)
• [PATCH v6 14/25] source.c, sink.c: Implement pa_{source, sink}_get_raw_latency_within_thread() calls
  • From: georg@xxxxxxxx (Georg Chini)
• [PATCH v6 16/25] loopback: Reset sink input rate when source or sink changes
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH v6 15/25] alsa-{source, sink}.c: Handle PA_{SOURCE, SINK}_MESSAGE_GET_RAW_LATENCY
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH v6 14/25] source.c, sink.c: Implement pa_{source, sink}_get_raw_latency_within_thread() calls
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH 2/2] bluetooth: Fix negative array index write
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH 1/2] bluetooth: Fix potential NULL pointer dereference
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH 2/2] bluetooth: Fix negative array index write
  • From: pmeerw@xxxxxxxxxx (Peter Meerwald-Stadler)
• [PATCH 1/2] bluetooth: Fix potential NULL pointer dereference
  • From: pmeerw@xxxxxxxxxx (Peter Meerwald-Stadler)
• update-card-properties? Possible?
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• update-card-properties? Possible?
  • From: bwechner@xxxxxxxxx (Bernd Wechner)
• Issue in libpulse crash for calc_next_timeout
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• Issue in libpulse crash for calc_next_timeout
  • From: dhananjayingroup@xxxxxxxxx (Dhananjay Joshi)
• [PATCH v6 14/25] source.c, sink.c: Implement pa_{source, sink}_get_raw_latency_within_thread() calls
  • From: georg@xxxxxxxx (Georg Chini)
• [PATCH 1/3] Remove newline at end of log messages
  • From: arun@xxxxxxxxxxxxxxxx (Arun Raghavan)
• [PATCH 3/3] bluetooth: Fix dead code
  • From: arun@xxxxxxxxxxxxxxxx (Arun Raghavan)
• [PATCH 2/3] bluetooth: Don't free modargs twice
  • From: arun@xxxxxxxxxxxxxxxx (Arun Raghavan)
• [PATCH 3/3] bluetooth: Fix dead code
  • From: pmeerw@xxxxxxxxxx (Peter Meerwald-Stadler)
• [PATCH 2/3] bluetooth: Don't free modargs twice
  • From: pmeerw@xxxxxxxxxx (Peter Meerwald-Stadler)
• [PATCH 1/3] Remove newline at end of log messages
  • From: pmeerw@xxxxxxxxxx (Peter Meerwald-Stadler)
• [PATCH v2 00/12] patches addressing some Coverity issues
  • From: pmeerw@xxxxxxxxxx (Peter Meerwald-Stadler)
• [PATCH v6 14/25] source.c, sink.c: Implement pa_{source, sink}_get_raw_latency_within_thread() calls
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH] sink-input, source-output: Fix logging, don't overwrite old_value when value == 0
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH] sink-input, source-output: Fix logging, don't overwrite old_value when value == 0
  • From: pmeerw@xxxxxxxxxx (Peter Meerwald-Stadler)
• update-card-properties? Possible?
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• update-card-properties? Possible?
  • From: bwechner@xxxxxxxxx (Bernd Wechner)
• Pulseaudio bluetooth sink problems
  • From: backupluis@xxxxxxxxx (backup luis)
• Input sound random detection.
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• Input sound random detection.
  • From: gus.duarte@xxxxxxxxx (Gustavo Duarte)
• Input sound random detection.
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH] pipe-sink: set correct latency
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH] pipe-sink: align buffer
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH v6 12/25] loopback: Implement underrun protection
  • From: georg@xxxxxxxx (Georg Chini)
• [PATCH] pipe-sink: align buffer
  • From: nils@xxxxxxxxxxxxxxxxx (Nils Schneider)
• Input sound random detection.
  • From: gus.duarte@xxxxxxxxx (Gustavo Duarte)
• [PATCH v6 12/25] loopback: Implement underrun protection
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• Input sound random detection.
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH v6 12/25] loopback: Implement underrun protection
  • From: georg@xxxxxxxx (Georg Chini)
• Input sound random detection.
  • From: gus.duarte@xxxxxxxxx (Gustavo Duarte)
• [PATCH v6 12/25] loopback: Implement underrun protection
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH] sink-input, source-output: Fix a leak during property change logging
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH] sink-input, source-output: Fix a leak during property change logging
  • From: pmeerw@xxxxxxxxxx (Peter Meerwald-Stadler)
• [PATCH webrtc-audio-processing] Proper detection of cxxabi.h and execinfo.h
  • From: thomas.petazzoni@xxxxxxxxxxxxxxxxxx (Thomas Petazzoni)
• [PATCH webrtc-audio-processing] webrtc/typedefs.h: make the code more architecture-generic
  • From: thomas.petazzoni@xxxxxxxxxxxxxxxxxx (Thomas Petazzoni)
• [PATCH] bluetooth: don't create the HSP/HFP profile twice
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH v2 1/7] bluetooth: wait for all profiles to connect before creating card
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH] stream-interaction: Fix a memory leak
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• Input sound random detection.
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH] stream-interaction: Fix a memory leak
  • From: arun@xxxxxxxxxxxxxxxx (Arun Raghavan)
• [PATCH] stream-interaction: Fix a memory leak
  • From: arun@xxxxxxxxxxxxxxxx (Arun Raghavan)
• [PATCH] shm: Wrap memfd-specific code in relevant ifdef
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH] source-output: Fix copy-pasto
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH] sink-input, source-output: Fix a leak during property change logging
  • From: arun@xxxxxxxxxxxxxxxx (Arun Raghavan)
• [PATCH] sink-input, source-output: Fix a leak during property change logging
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH] sink-input, source-output: Fix a leak during property change logging
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH] stream-interaction: Fix a memory leak
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH] sink-input, source-output: Fix a leak during property change logging
  • From: pmeerw@xxxxxxxxxx (Peter Meerwald-Stadler)
• [PATCH] shm: Wrap memfd-specific code in relevant ifdef
  • From: arun@xxxxxxxxxxxxxxxx (Arun Raghavan)
• [PATCH] source-output: Fix copy-pasto
  • From: arun@xxxxxxxxxxxxxxxx (Arun Raghavan)
• Input sound random detection.
  • From: gus.duarte@xxxxxxxxx (Gustavo Duarte)
• [PATCH] sink-input, source-output: Fix a leak during property change logging
  • From: arun@xxxxxxxxxxxxxxxx (Arun Raghavan)
• [PATCH] stream-interaction: Fix a memory leak
  • From: arun@xxxxxxxxxxxxxxxx (Arun Raghavan)
• [PATCH] bluetooth: don't create the HSP/HFP profile twice
  • From: arun@xxxxxxxxxxxxxxxx (Arun Raghavan)
• [PATCH v2 1/7] bluetooth: wait for all profiles to connect before creating card
  • From: arun@xxxxxxxxxxxxxxxx (Arun Raghavan)
• Input sound random detection.
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH webrtc-audio-processing] Proper detection of cxxabi.h and execinfo.h
  • From: mail@xxxxxxxxxxxxxxxx (Arun Raghavan)
• [PATCH webrtc-audio-processing] webrtc/typedefs.h: make the code more architecture-generic
  • From: mail@xxxxxxxxxxxxxxxx (Arun Raghavan)
• [PATCH webrtc-audio-processing] README.md: file invalid reference to pulseaudio mailing list
  • From: mail@xxxxxxxxxxxxxxxx (Arun Raghavan)
• [PATCH webrtc-audio-processing] configure.ac: fix architecture detection
  • From: mail@xxxxxxxxxxxxxxxx (Arun Raghavan)
• Input sound random detection.
  • From: gus.duarte@xxxxxxxxx (Gustavo Duarte)
• [PATCH 1/2] tests: Include signal.h in core-util-test.c
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH 2/2] build: Check version of check library, require >= 0.9.10
  • From: pmeerw@xxxxxxxxxx (Peter Meerwald)
• [PATCH 1/2] tests: Include signal.h in core-util-test.c
  • From: pmeerw@xxxxxxxxxx (Peter Meerwald)
• Test and Evaluate Echo Cancellation in an Embedded Device
  • From: caiortp@xxxxxxxxx (Caio)
• LADSPA on MacOS
  • From: matt.feifarek@xxxxxxxxx (Matt Feifarek)
• [PATCH v5] bluetooth: Add support for automatic switch between hsp and a2dp profiles
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH v5] bluetooth: Add support for automatic switch between hsp and a2dp profiles
  • From: pali.rohar@xxxxxxxxx (Pali Rohár)
• Input sound random detection.
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• Input sound random detection.
  • From: gus.duarte@xxxxxxxxx (Gustavo Duarte)
• [PATCH v5] bluetooth: Add support for automatic switch between hsp and a2dp profiles
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH v5] bluetooth: Add support for automatic switch between hsp and a2dp profiles
  • From: pali.rohar@xxxxxxxxx (Pali Rohár)
• [PATCH v5] bluetooth: Add support for automatic switch between hsp and a2dp profiles
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• Input sound random detection.
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• Input sound random detection.
  • From: gus.duarte@xxxxxxxxx (Gustavo Duarte)
• Input sound random detection.
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• Input sound random detection.
  • From: gus.duarte@xxxxxxxxx (Gustavo Duarte)
• [PATCH v2 7/7] bluetooth: refactor BlueZ 4 transport state setting
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH v2 6/7] bluetooth: unify BlueZ 4 and BlueZ 5 profile constant names
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH v2 5/7] bluetooth: unify BlueZ 4 and BlueZ 5 UUID handling
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH v2 4/7] bluetooth: update device's valid flag after parsing properties
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH v2 3/7] bluetooth: remove a redundant assignment
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH v2 2/7] card-restore: don't switch profiles when availability changes
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH v2 1/7] bluetooth: wait for all profiles to connect before creating card
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH v2 0/7] Fix the conflict between bluetooth-policy and card-restore (plus some refactoring)
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH webrtc-audio-processing] Proper detection of cxxabi.h and execinfo.h
  • From: thomas.petazzoni@xxxxxxxxxxxxxxxxxx (Thomas Petazzoni)
• [PATCH webrtc-audio-processing] webrtc/typedefs.h: make the code more architecture-generic
  • From: thomas.petazzoni@xxxxxxxxxxxxxxxxxx (Thomas Petazzoni)
• [PATCH webrtc-audio-processing] README.md: file invalid reference to pulseaudio mailing list
  • From: thomas.petazzoni@xxxxxxxxxxxxxxxxxx (Thomas Petazzoni)
• [PATCH webrtc-audio-processing] configure.ac: fix architecture detection
  • From: thomas.petazzoni@xxxxxxxxxxxxxxxxxx (Thomas Petazzoni)
• [PATCH 0/5] Fix the conflict between bluetooth-policy and card-restore
  • From: pali.rohar@xxxxxxxxx (Pali Rohár)
• [PATCH 0/5] Fix the conflict between bluetooth-policy and card-restore
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [Support] No sound after update? (fwd)
  • From: jdashiel@xxxxxxxxx (Jude DaShiell)
• [Support] No sound after update? (fwd)
  • From: jdashiel@xxxxxxxxx (Jude DaShiell)
• [PATCH 0/5] Fix the conflict between bluetooth-policy and card-restore
  • From: pali.rohar@xxxxxxxxx (Pali Rohár)
• [PATCH 0/5] Fix the conflict between bluetooth-policy and card-restore
  • From: fsateler@xxxxxxxxxx (Felipe Sateler)
• [PATCH 0/5] Fix the conflict between bluetooth-policy and card-restore
  • From: pali.rohar@xxxxxxxxx (Pali Rohár)
• [PATCH 5/5] card-restore: don't switch profiles when availability changes
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH 4/5] bluetooth: wait for all profiles to connect before creating card
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH 3/5] bluetooth: update device's valid flag after parsing properties
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH 2/5] bluetooth: remove a redundant assignment
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH 1/5] bluetooth: don't allow creating transports for invalid devices
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH 0/5] Fix the conflict between bluetooth-policy and card-restore
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH] bluetooth: When doing autoswitch call pa_card_set_profile with save=true
  • From: pali.rohar@xxxxxxxxx (Pali Rohár)
• [PATCH] bluetooth: When doing autoswitch call pa_card_set_profile with save=true
  • From: fsateler@xxxxxxxxxx (Felipe Sateler)
• [PATCH] bluetooth: When doing autoswitch call pa_card_set_profile with save=true
  • From: pali.rohar@xxxxxxxxx (Pali Rohár)
• [PATCH] bluetooth: When doing autoswitch call pa_card_set_profile with save=true
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH] bluetooth: When doing autoswitch call pa_card_set_profile with save=true
  • From: pali.rohar@xxxxxxxxx (Pali Rohár)
• [PATCH] bluetooth: When doing autoswitch call pa_card_set_profile with save=true
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH] bluetooth: When doing autoswitch call pa_card_set_profile with save=true
  • From: pali.rohar@xxxxxxxxx (Pali Rohár)
• [PATCH] bluetooth: When doing autoswitch call pa_card_set_profile with save=true
  • From: arun@xxxxxxxxxxxxxxxx (Arun Raghavan)
• Members-only list here ?
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• Two audio sources over network
  • From: apriljunkbox@xxxxxxxxxxx (Gavin Jacobs)
• [PATCH] bluetooth: When doing autoswitch call pa_card_set_profile with save=true
  • From: pali.rohar@xxxxxxxxx (Pali Rohár)
• [PATCH v5] bluetooth: Add support for automatic switch between hsp and a2dp profiles
  • From: pali.rohar@xxxxxxxxx (Pali Rohár)
• Members-only list here ?
  • From: tom@xxxxxxxxxxxx (Tom)
• Audio from programs within network namespaces
  • From: ttemplate223@xxxxxxxxx (Tmplt)
• [PATCH] bluetooth: don't create the HSP/HFP profile twice
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• corking record stream changes its source
  • From: arun@xxxxxxxxxxxxxxxx (Arun Raghavan)
• About RTP for multi-room
  • From: geecko66@xxxxxxxxxxx (Damien)
• Two audio sources over network
  • From: apriljunkbox@xxxxxxxxxxx (Gavin Jacobs)
• About RTP for multi-room
  • From: georg@xxxxxxxx (Georg Chini)
• About RTP for multi-room
  • From: geecko66@xxxxxxxxxxx (Damien)
• corking record stream changes its source
  • From: volker@xxxxxxxxxxxx (Volker)
• [PATCH v5] bluetooth: Add support for automatic switch between hsp and a2dp profiles
  • From: arun@xxxxxxxxxxxxxxxx (Arun Raghavan)
• Multiple Bluetooth sources
  • From: pali.rohar@xxxxxxxxx (Pali Rohár)
• add delay
  • From: arun@xxxxxxxxxxxxxxxx (Arun Raghavan)
• Multiple Bluetooth sources
  • From: arun@xxxxxxxxxxxxxxxx (Arun Raghavan)
• Multiple Bluetooth sources
  • From: philippe.latulippe@xxxxxxxxx (Philippe Latulippe)
• add delay
  • From: dmccasland@xxxxxxxxx (Doug McCasland)
• [PATCH] module-gsettings: new module to store configuration using gsettings
  • From: lebauce@xxxxxxxxx (Sylvain Baubeau)
• add delay
  • From: arun@xxxxxxxxxxxxxxxx (Arun Raghavan)
• add delay
  • From: dmccasland@xxxxxxxxx (Doug McCasland)
• HCI ACL packet data size
  • From: arun@xxxxxxxxxxxxxxxx (Arun Raghavan)
• Issue in libpulse crash for calc_next_timeout
  • From: arun@xxxxxxxxxxxxxxxx (Arun Raghavan)
• libpulse clients with no datagram sockets?
  • From: arun@xxxxxxxxxxxxxxxx (Arun Raghavan)
• add delay
  • From: arun@xxxxxxxxxxxxxxxx (Arun Raghavan)
• Write callback during stream setup
  • From: arun@xxxxxxxxxxxxxxxx (Arun Raghavan)
• [Support] epic fail on espeak research (fwd)
  • From: arun@xxxxxxxxxxxxxxxx (Arun Raghavan)
• Using PulseAudio for patchbay between a lot of clients
  • From: arun@xxxxxxxxxxxxxxxx (Arun Raghavan)
• Pulseaudio bluetooth sink problems
  • From: arun@xxxxxxxxxxxxxxxx (Arun Raghavan)
• Flushing other programs' streams
  • From: arun@xxxxxxxxxxxxxxxx (Arun Raghavan)
• Test and Evaluate Echo Cancellation in an Embedded Device
  • From: arun@xxxxxxxxxxxxxxxx (Arun Raghavan)
• run pulseaudio with DBUS_SESSION_BUS_ADDRESS set
  • From: arun@xxxxxxxxxxxxxxxx (Arun Raghavan)
• radeon with hdmi and displayport
  • From: arun@xxxxxxxxxxxxxxxx (Arun Raghavan)
• [PATCH v2] filter-apply, ladspa-sink, virtual-surround-sink: filter-apply supports ladspa-sink and virtual-surround-sink properly
  • From: jeongyeon.kim@xxxxxxxxxxx (KimJeongYeon)
• HCI ACL packet data size
  • From: marcotrapanese@xxxxxxxxx (Marco Trapanese)
• Issue in libpulse crash for calc_next_timeout
  • From: dhananjayingroup@xxxxxxxxx (Dhananjay Joshi)
• libpulse clients with no datagram sockets?
  • From: aseering@xxxxxxxxx (Adam Seering)
• [PATCH v5] bluetooth: Add support for automatic switch between hsp and a2dp profiles
  • From: pali.rohar@xxxxxxxxx (Pali Rohár)
• [PATCH] memblock: multiple references should make blocks read-only
  • From: arun@xxxxxxxxxxxxxxxx (Arun Raghavan)
• [RFC][PATCH] improve missing handling in memblockq (was Re: stream wedged in non-playing state)
  • From: arun@xxxxxxxxxxxxxxxx (Arun Raghavan)
• [RFC][PATCH] improve missing handling in memblockq (was Re: stream wedged in non-playing state)
  • From: ossman@xxxxxxxxx (Pierre Ossman)
• [PATCH] webrtc: C++11 is only required for WebRTC support
  • From: arun@xxxxxxxxxxxxxxxx (Arun Raghavan)
• [PATCH v5] bluetooth: Add support for automatic switch between hsp and a2dp profiles
  • From: arun@xxxxxxxxxxxxxxxx (Arun Raghavan)
• [PATCH v5] bluetooth: Add support for automatic switch between hsp and a2dp profiles
  • From: arun@xxxxxxxxxxxxxxxx (Arun Raghavan)
• [RFC][PATCH] improve missing handling in memblockq (was Re: stream wedged in non-playing state)
  • From: arun@xxxxxxxxxxxxxxxx (Arun Raghavan)
• [RFC][PATCH] improve missing handling in memblockq (was Re: stream wedged in non-playing state)
  • From: arun@xxxxxxxxxxxxxxxx (Arun Raghavan)
• [RFC][PATCH] improve missing handling in memblockq (was Re: stream wedged in non-playing state)
  • From: arun@xxxxxxxxxxxxxxxx (Arun Raghavan)
• [RFC][PATCH] improve missing handling in memblockq (was Re: stream wedged in non-playing state)
  • From: arun@xxxxxxxxxxxxxxxx (Arun Raghavan)
• add delay
  • From: dmccasland@xxxxxxxxx (Doug McCasland)
• [PATCH] launch: make pulseaudio.service properly order and require the socket
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH v6 11/25] loopback: Calculate and track minimum possible latency
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH v4] bluetooth: Add support for automatic switch between hsp and a2dp profiles
  • From: pali.rohar@xxxxxxxxx (Pali Rohár)
• [PATCH 3/3] role-ducking: Add support for fading feature
  • From: sangchul1011@xxxxxxxxx (Sangchul Lee)
• [PATCH 2/3] stream-interaction: Add support for fading in case of ducking/unducking
  • From: sangchul1011@xxxxxxxxx (Sangchul Lee)
• [PATCH 1/3] stream-interaction: Modify codes to use idxset and macro
  • From: sangchul1011@xxxxxxxxx (Sangchul Lee)
• [PATCH 0/3] role-ducking: Add support for fading feature
  • From: sangchul1011@xxxxxxxxx (Sangchul Lee)
• [PATCH] launch: make pulseaudio.service properly order and require the socket
  • From: fsateler@xxxxxxxxxx (Felipe Sateler)
• Access control
  • From: diwic@xxxxxxxxxx (David Henningsson)
• Write callback during stream setup
  • From: achronop@xxxxxxxxx (Alexandros Chronopoulos)
• [PATCH 4/6] PROTOCOL: Added PA_COMMAND_SET_(SINK|SOURCE)_LATENCY_OFFSET
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• Access control
  • From: wim.taymans@xxxxxxxxx (Wim Taymans)
• Access control
  • From: diwic@xxxxxxxxxx (David Henningsson)
• Access control
  • From: wim.taymans@xxxxxxxxx (Wim Taymans)
• [PATCH 4/6] PROTOCOL: Added PA_COMMAND_SET_(SINK|SOURCE)_LATENCY_OFFSET
  • From: chrisjbillington@xxxxxxxxx (Chris Billington)
• [PATCH 4/6] PROTOCOL: Added PA_COMMAND_SET_(SINK|SOURCE)_LATENCY_OFFSET
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH v6 09/25] loopback: Refactor latency initialization
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH] daemon: Tone down system mode snarkiness
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH v4] bluetooth: Add support for automatic switch between hsp and a2dp profiles
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH v6 00/25] Optimize latency handling in module-loopback
  • From: georg@xxxxxxxx (Georg Chini)
• [PATCH v6 09/25] loopback: Refactor latency initialization
  • From: georg@xxxxxxxx (Georg Chini)
• PulseAudio bluetooth wiki page
  • From: arun@xxxxxxxxxxxxxxxx (Arun Raghavan)
• [PATCH] daemon: Tone down system mode snarkiness
  • From: arun@xxxxxxxxxxxxxxxx (Arun Raghavan)
• [PATCH v6 00/25] Optimize latency handling in module-loopback
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH v6 09/25] loopback: Refactor latency initialization
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• PulseAudio bluetooth wiki page
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• PulseAudio bluetooth wiki page
  • From: georg@xxxxxxxx (Georg Chini)
• PulseAudio bluetooth wiki page (was: HFP HF - Reject SCO Issue)
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH v4] bluetooth: Add support for automatic switch between hsp and a2dp profiles
  • From: pali.rohar@xxxxxxxxx (Pali Rohár)
• Config option to disable auto microphone boost?
  • From: laszlo.kertesz@xxxxxxxxx (Laszlo KERTESZ)
• [alsa-lib][PATCH] hctl: remove assertion from element event handler because removal event overwrites all of queued events
  • From: tiwai@xxxxxxx (Takashi Iwai)
• [alsa-lib][PATCH] hctl: remove assertion from element event handler because removal event overwrites all of queued events
  • From: o-takashi@xxxxxxxxxxxxx (Takashi Sakamoto)
• [PATCH 4/4] sink, sink-input: Code cleanup regarding volume ramping
  • From: sangchul1011@xxxxxxxxx (Sangchul Lee)
• [PATCH 3/4] volume ramp: adding volume ramping to sink-input
  • From: sangchul1011@xxxxxxxxx (Sangchul Lee)
• [PATCH 2/4] volume ramp: add volume ramping to sink
  • From: sangchul1011@xxxxxxxxx (Sangchul Lee)
• [PATCH 1/4] volume ramp: additions to the low level infra
  • From: sangchul1011@xxxxxxxxx (Sangchul Lee)
• [PATCH 0/4] volume ramping
  • From: sangchul1011@xxxxxxxxx (Sangchul Lee)
• [PATCH] modargs: Document behaviour on missing arguments
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH] pa_modargs interface question
  • From: pulseaudio@xxxxxxxxxx (Ulrich Eckhardt)
• [PATCH] modargs: Document behaviour on missing arguments
  • From: pulseaudio@xxxxxxxxxx (Ulrich Eckhardt)
• [PATCH] pa_modargs interface question
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH] webrtc: C++11 is only required for WebRTC support
  • From: romain.naour@xxxxxxxxx (Romain Naour)
• [PATCH] pa_modargs interface question
  • From: pulseaudio@xxxxxxxxxx (Ulrich Eckhardt)
• pa_modargs interface question
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH 0/5] Add access control to protocol-native
  • From: darwish.07@xxxxxxxxx (Ahmed S. Darwish)