On Sun, 2016-10-30 at 21:36 -0400, Allan Wind wrote: > On 2016-10-28 15:40:06, Tanu Kaskinen wrote: > > The configuration seems fine, so I'd guess it's the hardware. When you > > originally only had a stereo sink, did this problem not occur? If you > > change the Speaker mapping to only have two channels, does the problem > > go away? > > Yeah, I had "copy mode" enabled on the device, and thought I was > disabling it with "set". Instead I should use "select". > Incidentally, the leds behave the same in either case which was > what threw me for a loop. > > Also, I was able to get udev to load my profile by modifying the > file /lib/udev/rules.d/90-pulseaudio.rules. Initially, I > had written my own 91-pulseaudo-rme-babyface-pro.conf which did > not work. Maybe udev does not want to reconfigure a device that > was already configured? There's a udevadm command for resetting/reloading the configuration, and I'm sure I have done that successfully in the past. I don't remember the exact command, however. You mentioned "devadm control -- reload-rules", which looks like it should do the job, but the "Profiles" wiki page mentions a different command: "sudo udevadm trigger -ssound". -- Tanu https://www.patreon.com/tanuk
