Hi, Thanks Tanu for your feedback. On these pictures you can see the sound level at 100% display on top bar sound widget and at Gnome sound settings. Sound widget: https://plus.google.com/102144018413535329430/posts/JAvrooEA66p Sound settings: https://plus.google.com/102144018413535329430/posts/gWTMYYYwwRA Video showing, how the sound input is starting to work, after a bit change on input sound level volume. https://plus.google.com/102144018413535329430/posts/H9apGEdEzw7 Also i attach pactl output when sound input isn't working. Thanks in advance. Gustavo. On 8/8/16 12:37 PM, Tanu Kaskinen wrote: > On Mon, 2016-08-08 at 12:06 -0300, Gustavo Duarte wrote: >> Attached you can find the outputs requested. > There are changes in the "Capture" and "Internal Mic Boost" volume > levels in alsa, and in the source volume level in pulseaudio. > > In the non-working case: > > Capture: > Front Left: Capture 13 [42%] [3.00dB] [on] > Front Right: Capture 13 [42%] [3.00dB] [on] > > Internal Mic Boost: > Front Left: 1 [33%] [12.00dB] > Front Right: 1 [33%] [12.00dB] > > Source volume in pulseaudio: > Volume: 0: 14% 1: 14% > 0: -51,00 dB 1: -51,00 dB > > In the working case: > > Capture: > Front Left: Capture 11 [35%] [0.00dB] [on] > Front Right: Capture 11 [35%] [0.00dB] [on] > > Internal Mic Boost: > Front Left: 3 [100%] [36.00dB] > Front Right: 3 [100%] [36.00dB] > > Source volume in pulseaudio: > Volume: 0: 32% 1: 32% > 0: -29,80 dB 1: -29,80 dB > > So in the working case the Capture volume is 3 dB lower, the Internal Mic Boost volume is 24 dB higher, and the total difference (as shown by pulseaudio) is 21.2 dB. That is quite a lot, and perhaps explains why you don't hear anything in the non-working case. > > Based on this, the problem would appear to be simply too low source volume. In your original explanation, however, you said that the input volume is 100% when it's not working, and setting the volume in sound settings to 20% makes it work. It would be good to know in more detail what you mean by "sound settings" and "input volume". You could upload somewhere a screenshot of the sound settings when it's not working and input volume is 100%, and while the sound settings are open in this state, run "pactl list" again and send it to the mailing list. > > -- > Tanu > _______________________________________________ > pulseaudio-discuss mailing list > pulseaudio-discuss at lists.freedesktop.org > https://lists.freedesktop.org/mailman/listinfo/pulseaudio-discuss -------------- next part -------------- Módulo #0 Nombre: module-device-restore Argumento: Contador de uso: n/d Propiedades: module.author = "Lennart Poettering" module.description = "Automatically restore the volume/mute state of devices" module.version = "4.0" Módulo #1 Nombre: module-stream-restore Argumento: Contador de uso: n/d Propiedades: module.author = "Lennart Poettering" module.description = "Automatically restore the volume/mute/device state of streams" module.version = "4.0" Módulo #2 Nombre: module-card-restore Argumento: Contador de uso: n/d Propiedades: module.author = "Lennart Poettering" module.description = "Automatically restore profile of cards" module.version = "4.0" Módulo #3 Nombre: module-augment-properties Argumento: Contador de uso: n/d Propiedades: module.author = "Lennart Poettering" module.description = "Augment the property sets of streams with additional static information" module.version = "4.0" Módulo #4 Nombre: module-switch-on-port-available Argumento: Contador de uso: n/d Propiedades: Módulo #5 Nombre: module-alsa-card Argumento: device_id="0" name="pci-0000_00_1b.0" card_name="alsa_card.pci-0000_00_1b.0" namereg_fail=false tsched=yes fixed_latency_range=no ignore_dB=no deferred_volume=yes use_ucm=yes card_properties="module-udev-detect.discovered=1" Contador de uso: 1 Propiedades: module.author = "Lennart Poettering" module.description = "ALSA Card" module.version = "4.0" Módulo #6 Nombre: module-udev-detect Argumento: Contador de uso: n/d Propiedades: module.author = "Lennart Poettering" module.description = "Detect available audio hardware and load matching drivers" module.version = "4.0" Módulo #7 Nombre: module-bluetooth-policy Argumento: Contador de uso: n/d Propiedades: module.author = "Frédéric Dalleau" module.description = "When a bluetooth sink or source is added, load module-loopback" module.version = "4.0" Módulo #8 Nombre: module-bluetooth-discover Argumento: Contador de uso: n/d Propiedades: module.author = "Joao Paulo Rechi Vita" module.description = "Detect available bluetooth audio devices and load bluetooth audio drivers" module.version = "4.0" Módulo #9 Nombre: module-native-protocol-unix Argumento: Contador de uso: n/d Propiedades: module.author = "Lennart Poettering" module.description = "Native protocol (UNIX sockets)" module.version = "4.0" Módulo #10 Nombre: module-default-device-restore Argumento: Contador de uso: n/d Propiedades: module.author = "Lennart Poettering" module.description = "Automatically restore the default sink and source" module.version = "4.0" Módulo #11 Nombre: module-rescue-streams Argumento: Contador de uso: n/d Propiedades: module.author = "Lennart Poettering" module.description = "When a sink/source is removed, try to move their streams to the default sink/source" module.version = "4.0" Módulo #12 Nombre: module-always-sink Argumento: Contador de uso: n/d Propiedades: module.author = "Colin Guthrie" module.description = "Tenga siempre cargado al menos un destino aunque sea uno nulo" module.version = "4.0" Módulo #13 Nombre: module-intended-roles Argumento: Contador de uso: n/d Propiedades: module.author = "Lennart Poettering" module.description = "Automatically set device of streams based of intended roles of devices" module.version = "4.0" Módulo #14 Nombre: module-suspend-on-idle Argumento: Contador de uso: n/d Propiedades: module.author = "Lennart Poettering" module.description = "When a sink/source is idle for too long, suspend it" module.version = "4.0" Módulo #15 Nombre: module-systemd-login Argumento: Contador de uso: n/d Propiedades: module.author = "Lennart Poettering" module.description = "Create a client for each login session of this user" module.version = "4.0" Módulo #16 Nombre: module-position-event-sounds Argumento: Contador de uso: n/d Propiedades: module.author = "Lennart Poettering" module.description = "Position event sounds between L and R depending on the position on screen of the widget triggering them." module.version = "4.0" Módulo #17 Nombre: module-filter-heuristics Argumento: Contador de uso: n/d Propiedades: module.author = "Colin Guthrie" module.description = "Detect when various filters are desirable" module.version = "4.0" Módulo #18 Nombre: module-filter-apply Argumento: Contador de uso: n/d Propiedades: module.author = "Colin Guthrie" module.description = "Load filter sinks automatically when needed" module.version = "4.0" Módulo #19 Nombre: module-x11-publish Argumento: display=:0 Contador de uso: n/d Propiedades: module.author = "Lennart Poettering" module.description = "X11 credential publisher" module.version = "4.0" Módulo #20 Nombre: module-x11-bell Argumento: display=:0 sample=bell.ogg Contador de uso: n/d Propiedades: module.author = "Lennart Poettering" module.description = "X11 bell interceptor" module.version = "4.0" Módulo #21 Nombre: module-x11-cork-request Argumento: display=:0 Contador de uso: n/d Propiedades: module.author = "Lennart Poettering" module.description = "Synthesize X11 media key events when cork/uncork is requested" module.version = "4.0" Módulo #22 Nombre: module-x11-xsmp Argumento: display=:0 session_manager=local/ceibal:@/tmp/.ICE-unix/1300,unix/ceibal:/tmp/.ICE-unix/1300 Contador de uso: n/d Propiedades: module.author = "Lennart Poettering" module.description = "X11 session management" module.version = "4.0" Destino #0 Estado: RUNNING Nombre: alsa_output.pci-0000_00_1b.0.analog-stereo Descripción: Audio Interno Estéreo analógico Controlador: module-alsa-card.c Especificación de muestra: s16le 2ch 48000Hz Asignación de canal: front-left,front-right Módulo propietario: 5 Silencio: no Volumen: 0: 74% 1: 74% 0: -7,70 dB 1: -7,70 dB balance 0,00 Volumen base: 100% 0,00 dB Origen de monitor: alsa_output.pci-0000_00_1b.0.analog-stereo.monitor Latencia: 46260 usec, configurada 46000 usec Marcas: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY Propiedades: alsa.resolution_bits = "16" device.api = "alsa" device.class = "sound" alsa.class = "generic" alsa.subclass = "generic-mix" alsa.name = "VT1802 Analog" alsa.id = "VT1802 Analog" alsa.subdevice = "0" alsa.subdevice_name = "subdevice #0" alsa.device = "0" alsa.card = "0" alsa.card_name = "HDA Intel PCH" alsa.long_card_name = "HDA Intel PCH at 0xd0810000 irq 94" alsa.driver_name = "snd_hda_intel" device.bus_path = "pci-0000:00:1b.0" sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card0" device.bus = "pci" device.vendor.id = "8086" device.vendor.name = "Intel Corporation" device.product.id = "0f04" device.product.name = "ValleyView High Definition Audio Controller" device.form_factor = "internal" device.string = "front:0" device.buffering.buffer_size = "65536" device.buffering.fragment_size = "32768" device.access_mode = "mmap+timer" device.profile.name = "analog-stereo" device.profile.description = "Estéreo analógico" device.description = "Audio Interno Estéreo analógico" alsa.mixer_name = "VIA VT1802" alsa.components = "HDA:11068446,15585471,00100000 HDA:80862882,80860101,00100000" module-udev-detect.discovered = "1" device.icon_name = "audio-card-pci" Puertos: analog-output-speaker: Altavoces (priority: 10000) analog-output-headphones: Auriculares analógicos (priority: 9000, not available) Puerto Activo: analog-output-speaker Formatos: pcm Fuente #0 Estado: IDLE Nombre: alsa_output.pci-0000_00_1b.0.analog-stereo.monitor Descripción: Monitor of Audio Interno Estéreo analógico Controlador: module-alsa-card.c Especificación de la Muestra: s16le 2ch 44100Hz Mapa del Canal: front-left,front-right Módulo Dueño: 5 Mudo: no Volume: 0: 100% 1: 100% 0: 0,00 dB 1: 0,00 dB balance 0,00 Volume Base: 100% 0,00 dB Monitoreo del destino: alsa_output.pci-0000_00_1b.0.analog-stereo Latencia: 0 usec, configurado 341333 useg Banderas: DECIBEL_VOLUME LATENCY Propiedades: device.description = "Monitor of Audio Interno Estéreo analógico" device.class = "monitor" alsa.card = "0" alsa.card_name = "HDA Intel PCH" alsa.long_card_name = "HDA Intel PCH at 0xd0810000 irq 94" alsa.driver_name = "snd_hda_intel" device.bus_path = "pci-0000:00:1b.0" sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card0" device.bus = "pci" device.vendor.id = "8086" device.vendor.name = "Intel Corporation" device.product.id = "0f04" device.product.name = "ValleyView High Definition Audio Controller" device.form_factor = "internal" device.string = "0" module-udev-detect.discovered = "1" device.icon_name = "audio-card-pci" Formatos: pcm Fuente #1 Estado: IDLE Nombre: alsa_input.pci-0000_00_1b.0.analog-stereo Descripción: Audio Interno Estéreo analógico Controlador: module-alsa-card.c Especificación de la Muestra: s16le 2ch 48000Hz Mapa del Canal: front-left,front-right Módulo Dueño: 5 Mudo: no Volume: 0: 100% 1: 100% 0: 0,00 dB 1: 0,00 dB balance 0,00 Volume Base: 8% -66,00 dB Monitoreo del destino: n/d Latencia: 48215 usec, configurado 341333 useg Banderas: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY Propiedades: alsa.resolution_bits = "16" device.api = "alsa" device.class = "sound" alsa.class = "generic" alsa.subclass = "generic-mix" alsa.name = "VT1802 Analog" alsa.id = "VT1802 Analog" alsa.subdevice = "0" alsa.subdevice_name = "subdevice #0" alsa.device = "0" alsa.card = "0" alsa.card_name = "HDA Intel PCH" alsa.long_card_name = "HDA Intel PCH at 0xd0810000 irq 94" alsa.driver_name = "snd_hda_intel" device.bus_path = "pci-0000:00:1b.0" sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card0" device.bus = "pci" device.vendor.id = "8086" device.vendor.name = "Intel Corporation" device.product.id = "0f04" device.product.name = "ValleyView High Definition Audio Controller" device.form_factor = "internal" device.string = "front:0" device.buffering.buffer_size = "65536" device.buffering.fragment_size = "32768" device.access_mode = "mmap+timer" device.profile.name = "analog-stereo" device.profile.description = "Estéreo analógico" device.description = "Audio Interno Estéreo analógico" alsa.mixer_name = "VIA VT1802" alsa.components = "HDA:11068446,15585471,00100000 HDA:80862882,80860101,00100000" module-udev-detect.discovered = "1" device.icon_name = "audio-card-pci" Puertos: analog-input-microphone-internal: Micrófono interno (priority: 8900) analog-input-microphone: Micrófono (priority: 8700, not available) Puerto Activo: analog-input-microphone-internal Formatos: pcm Entrada de destino #6 Disco: protocol-native.c Módulo propietario: 9 Cliente: 10 Destino: 0 Especificación de sample: s16le 2ch 48000Hz Mapa de canal: front-left,front-right Formato: pcm, format.sample_format = "\"s16le\"" format.rate = "48000" format.channels = "2" format.channel_map = "\"front-left,front-right\"" Corked: no Mute: no Volumen: 0: 100% 1: 100% 0: 0,00 dB 1: 0,00 dB balance 0,00 Latencia de búfer: 68333 usec Latencia de destino: 45488 usec Método de resample: n/d Propiedades: window.icon_name = "skype" application.icon_name = "skype" media.role = "phone" media.name = "Output" application.name = "Skype" native-protocol.peer = "UNIX socket client" native-protocol.version = "28" application.process.id = "2576" application.process.user = "ceibal" application.process.host = "ceibal" application.process.binary = "skype" application.language = "es_UY.UTF-8" window.x11.display = ":0" application.process.machine_id = "7fa399cd946674ed89a5c33856b0fa6b" application.process.session_id = "c1" module-stream-restore.id = "sink-input-by-media-role:phone" Cliente #0 Controlador: module-systemd-login.c Módulo dueño: 15 Propiedades: application.name = "Login Session c1" systemd-login.session = "c1" Cliente #2 Controlador: protocol-native.c Módulo dueño: 9 Propiedades: application.name = "GNOME Volume Control Media Keys" native-protocol.peer = "UNIX socket client" native-protocol.version = "28" application.id = "org.gnome.VolumeControl" application.icon_name = "multimedia-volume-control" application.version = "3.8.6.1" application.process.id = "1296" application.process.user = "ceibal" application.process.host = "ceibal" application.process.binary = "gnome-settings-daemon" application.language = "es_UY.UTF-8" window.x11.display = ":0" application.process.machine_id = "7fa399cd946674ed89a5c33856b0fa6b" application.process.session_id = "c1" Cliente #6 Controlador: module-x11-xsmp.c Módulo dueño: 22 Propiedades: application.name = "XSMP Session on gnome-session as 1093f2416a9062bee7147074621293839000000013000036" xsmp.vendor = "gnome-session" xsmp.client.id = "1093f2416a9062bee7147074621293839000000013000036" Cliente #7 Controlador: protocol-native.c Módulo dueño: 9 Propiedades: application.name = "GNOME Shell" native-protocol.peer = "UNIX socket client" native-protocol.version = "28" application.id = "org.gnome.Shell" application.icon_name = "start-here" application.language = "es_UY.UTF-8" window.x11.screen = "0" window.x11.display = ":0" application.process.id = "1526" application.process.user = "ceibal" application.process.host = "ceibal" application.process.binary = "gnome-shell" application.process.machine_id = "7fa399cd946674ed89a5c33856b0fa6b" application.process.session_id = "c1" Cliente #8 Controlador: protocol-native.c Módulo dueño: 9 Propiedades: application.name = "GNOME Shell Volume Control" native-protocol.peer = "UNIX socket client" native-protocol.version = "28" application.id = "org.gnome.VolumeControl" application.icon_name = "multimedia-volume-control" application.version = "3.10.4" application.process.id = "1526" application.process.user = "ceibal" application.process.host = "ceibal" application.process.binary = "gnome-shell" application.language = "es_UY.UTF-8" window.x11.display = ":0" application.process.machine_id = "7fa399cd946674ed89a5c33856b0fa6b" application.process.session_id = "c1" Cliente #10 Controlador: protocol-native.c Módulo dueño: 9 Propiedades: application.name = "Skype" native-protocol.peer = "UNIX socket client" native-protocol.version = "28" application.process.id = "2576" application.process.user = "ceibal" application.process.host = "ceibal" application.process.binary = "skype" application.language = "es_UY.UTF-8" window.x11.display = ":0" application.process.machine_id = "7fa399cd946674ed89a5c33856b0fa6b" application.process.session_id = "c1" application.icon_name = "skype.png" Cliente #11 Controlador: protocol-native.c Módulo dueño: 9 Propiedades: application.name = "pactl" native-protocol.peer = "UNIX socket client" native-protocol.version = "28" application.process.id = "2653" application.process.user = "ceibal" application.process.host = "ceibal" application.process.binary = "pactl" application.language = "es_UY.UTF-8" window.x11.display = ":0" application.process.machine_id = "7fa399cd946674ed89a5c33856b0fa6b" application.process.session_id = "c1" Muestra #0 Nombre: bell-window-system Especificaciones de la muestra: s16le 2ch 44100Hz Mapa del canal: front-left,front-right Volumen: (incorrecto) (incorrecto) balance 0,00 Duración: 0,1s Tamaño: 24,0 KiB Lazy: no Nombre del archivo: n/d Propiedades: media.role = "event" application.process.id = "1946" application.name = "gnome-terminal" event.description = "Evento de campana" event.id = "bell-window-system" media.name = "bell-window-system" media.filename = "/usr/share//sounds/freedesktop/stereo/bell.oga" native-protocol.peer = "UNIX socket client" native-protocol.version = "28" application.id = "org.gnome.Shell" application.icon_name = "start-here" application.language = "es_UY.UTF-8" window.x11.screen = "0" window.x11.display = ":0" application.process.user = "ceibal" application.process.host = "ceibal" application.process.binary = "gnome-shell" application.process.machine_id = "7fa399cd946674ed89a5c33856b0fa6b" application.process.session_id = "c1" Placa #0 Nombre: alsa_card.pci-0000_00_1b.0 Controlador: module-alsa-card.c Módulo dueño: 5 Propiedades: alsa.card = "0" alsa.card_name = "HDA Intel PCH" alsa.long_card_name = "HDA Intel PCH at 0xd0810000 irq 94" alsa.driver_name = "snd_hda_intel" device.bus_path = "pci-0000:00:1b.0" sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card0" device.bus = "pci" device.vendor.id = "8086" device.vendor.name = "Intel Corporation" device.product.id = "0f04" device.product.name = "ValleyView High Definition Audio Controller" device.form_factor = "internal" device.string = "0" device.description = "Audio Interno" module-udev-detect.discovered = "1" device.icon_name = "audio-card-pci" Perfiles: input:analog-stereo: Estéreo analógico Entrada (sinks: 0, sources: 1, priority. 60) output:analog-stereo: Estéreo analógico Salida (sinks: 1, sources: 0, priority. 6000) output:analog-stereo+input:analog-stereo: Estéreo Analógico Dúplex (sinks: 1, sources: 1, priority. 6060) output:hdmi-stereo: Digital Stereo (HDMI) Salida (sinks: 1, sources: 0, priority. 5400) output:hdmi-stereo+input:analog-stereo: Digital Stereo (HDMI) Salida + Estéreo analógico Entrada (sinks: 1, sources: 1, priority. 5460) output:hdmi-surround: Digital Surround 5.1 (HDMI) Salida (sinks: 1, sources: 0, priority. 300) output:hdmi-surround+input:analog-stereo: Digital Surround 5.1 (HDMI) Salida + Estéreo analógico Entrada (sinks: 1, sources: 1, priority. 360) off: Apagado (sinks: 0, sources: 0, priority. 0) Perfil activo: output:analog-stereo+input:analog-stereo Puertos: analog-input-microphone-internal: Micrófono interno (priority: 8900, latency offset: 0 usec) Propiedades: device.icon_name = "audio-input-microphone" Parte del perfil(es): input:analog-stereo, output:analog-stereo+input:analog-stereo, output:hdmi-stereo+input:analog-stereo, output:hdmi-surround+input:analog-stereo analog-input-microphone: Micrófono (priority: 8700, latency offset: 0 usec, not available) Propiedades: device.icon_name = "audio-input-microphone" Parte del perfil(es): input:analog-stereo, output:analog-stereo+input:analog-stereo, output:hdmi-stereo+input:analog-stereo, output:hdmi-surround+input:analog-stereo analog-output-speaker: Altavoces (priority: 10000, latency offset: 0 usec) Propiedades: device.icon_name = "audio-speakers" Parte del perfil(es): output:analog-stereo, output:analog-stereo+input:analog-stereo analog-output-headphones: Auriculares analógicos (priority: 9000, latency offset: 0 usec, not available) Propiedades: device.icon_name = "audio-headphones" Parte del perfil(es): output:analog-stereo, output:analog-stereo+input:analog-stereo hdmi-output-0: HDMI / DisplayPort (priority: 5900, latency offset: 0 usec, not available) Propiedades: device.icon_name = "video-display" Parte del perfil(es): output:hdmi-stereo, output:hdmi-stereo+input:analog-stereo, output:hdmi-surround, output:hdmi-surround+input:analog-stereo
