Input sound random detection.

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,

I did the test suggested, parecord worked, however pasuspender not.

I saw after run pasuspender, all the sound stop working, the input (mic) 
and output (speaker).

So i repeat the test and got two pactl output as following:

1) Boot the laptop.

2) run parecord --device=alsa_input.pci-0000_00_1b.0.analog-stereo test.wav

3) aplay test.wav, sounds was recorded, works fine.

4) Open gnome-settings, audio meter show activity.

5) Run pactl list > without-pasuspender.pactl

6) Run pasuspender -- arecord --device=plughw:0 test1.wav

7) aplay test1.wav, sounds wasn't recorded.

8) Open gnome-settings, audio meters doesn't show activity.

9) Run pactl list > with-pasuspender.pactl

I hope this sequence be usefully for you, if not please tell how to do 
another one.

I attach both pactl outputs.

Thanks in advance.

Gustavo.



On 8/10/16 12:19 PM, Tanu Kaskinen wrote:
> On Wed, 2016-08-10 at 11:43 -0300, Gustavo Duarte wrote:
>> Hi Tanu, thank you for the feedback.
>>
>>
>> No, i can't break the microphne after it started to working.
>>
>>
>> The sequence is following:
>>
>> 1) Boot the laptop.
>>
>> 2) Mic with conf apps, like skype and Hangout isn't working.
>>
>> 3) Mic on other sound apps type, like QArecord, working well.
>>
>> 4) Changing volume input level on gnome settings.
>>
>> 5) Mic start to working with Skype.
>>
>> 5) Change the volume to 100%, and MIC still working.
>>
>> 6) Reboot the laptop, and back to beheavoirs from step 1),
>>
>> I wonder why, mic is start to working if change the volume from
>> gnome-settings ?
>>
>> I tried to change de volume with:
>>
>> amixer set Mic 20 on
>>
>> or
>> pacmd set-source-volume 1 13106
>> pacmd set-sourece-mute 1 0
>>
>> and without effects.
>>
>> Is like, the settings should be changed from a gui apps, may be
>> something related with a dbus signal ?
> D-Bus problems are extremely unlikely, because Gnome sound settings
> doesn't use D-Bus to communicate with pulseaudio.
>
>> I'm going to see the source code of gnome-settings, to see what it does
>> to change the volume, and see if a can find a clue for this side.
>>
>> Do you have another test, i can do ?
> Right after boot, before running any other applications, you can try to
> record something with this command:
>
> parecord --device=alsa_input.pci-0000_00_1b.0.analog-stereo test.wav
>
> Does that work? That is, does test.wav contain any non-silence audio?
>
> If not, you can also try
>
> pasuspender -- arecord --device=plughw:0 test.wav
>
> Does that work? If not, it's an alsa bug.
>
> If both commands work, you can try opening Gnome audio settings. If it
> shows that the volume is 100%, but the volume meter shows no activity,
> try the parecord command again while the sound settings is open. Is
> parecord capable of recording audio while the sound settings indicates
> that the mic doesn't work? While the sound settings is open and
> parecord is running, run "pactl list" and send the output to the
> mailing list.
>
> -- 
> Tanu
> _______________________________________________
> pulseaudio-discuss mailing list
> pulseaudio-discuss at lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/pulseaudio-discuss

-------------- next part --------------
Módulo #0
	Nombre: module-device-restore
	Argumento: 
	Contador de uso: n/d
	Propiedades:
		module.author = "Lennart Poettering"
		module.description = "Automatically restore the volume/mute state of devices"
		module.version = "4.0"

Módulo #1
	Nombre: module-stream-restore
	Argumento: 
	Contador de uso: n/d
	Propiedades:
		module.author = "Lennart Poettering"
		module.description = "Automatically restore the volume/mute/device state of streams"
		module.version = "4.0"

Módulo #2
	Nombre: module-card-restore
	Argumento: 
	Contador de uso: n/d
	Propiedades:
		module.author = "Lennart Poettering"
		module.description = "Automatically restore profile of cards"
		module.version = "4.0"

Módulo #3
	Nombre: module-augment-properties
	Argumento: 
	Contador de uso: n/d
	Propiedades:
		module.author = "Lennart Poettering"
		module.description = "Augment the property sets of streams with additional static information"
		module.version = "4.0"

Módulo #4
	Nombre: module-switch-on-port-available
	Argumento: 
	Contador de uso: n/d
	Propiedades:
		

Módulo #5
	Nombre: module-alsa-card
	Argumento: device_id="0" name="pci-0000_00_1b.0" card_name="alsa_card.pci-0000_00_1b.0" namereg_fail=false tsched=yes fixed_latency_range=no ignore_dB=no deferred_volume=yes use_ucm=yes card_properties="module-udev-detect.discovered=1"
	Contador de uso: 2
	Propiedades:
		module.author = "Lennart Poettering"
		module.description = "ALSA Card"
		module.version = "4.0"

Módulo #6
	Nombre: module-udev-detect
	Argumento: 
	Contador de uso: n/d
	Propiedades:
		module.author = "Lennart Poettering"
		module.description = "Detect available audio hardware and load matching drivers"
		module.version = "4.0"

Módulo #7
	Nombre: module-bluetooth-policy
	Argumento: 
	Contador de uso: n/d
	Propiedades:
		module.author = "Frédéric Dalleau"
		module.description = "When a bluetooth sink or source is added, load module-loopback"
		module.version = "4.0"

Módulo #8
	Nombre: module-bluetooth-discover
	Argumento: 
	Contador de uso: n/d
	Propiedades:
		module.author = "Joao Paulo Rechi Vita"
		module.description = "Detect available bluetooth audio devices and load bluetooth audio drivers"
		module.version = "4.0"

Módulo #9
	Nombre: module-native-protocol-unix
	Argumento: 
	Contador de uso: n/d
	Propiedades:
		module.author = "Lennart Poettering"
		module.description = "Native protocol (UNIX sockets)"
		module.version = "4.0"

Módulo #10
	Nombre: module-default-device-restore
	Argumento: 
	Contador de uso: n/d
	Propiedades:
		module.author = "Lennart Poettering"
		module.description = "Automatically restore the default sink and source"
		module.version = "4.0"

Módulo #11
	Nombre: module-rescue-streams
	Argumento: 
	Contador de uso: n/d
	Propiedades:
		module.author = "Lennart Poettering"
		module.description = "When a sink/source is removed, try to move their streams to the default sink/source"
		module.version = "4.0"

Módulo #12
	Nombre: module-always-sink
	Argumento: 
	Contador de uso: n/d
	Propiedades:
		module.author = "Colin Guthrie"
		module.description = "Tenga siempre cargado al menos un destino aunque sea uno nulo"
		module.version = "4.0"

Módulo #13
	Nombre: module-intended-roles
	Argumento: 
	Contador de uso: n/d
	Propiedades:
		module.author = "Lennart Poettering"
		module.description = "Automatically set device of streams based of intended roles of devices"
		module.version = "4.0"

Módulo #14
	Nombre: module-suspend-on-idle
	Argumento: 
	Contador de uso: n/d
	Propiedades:
		module.author = "Lennart Poettering"
		module.description = "When a sink/source is idle for too long, suspend it"
		module.version = "4.0"

Módulo #15
	Nombre: module-systemd-login
	Argumento: 
	Contador de uso: n/d
	Propiedades:
		module.author = "Lennart Poettering"
		module.description = "Create a client for each login session of this user"
		module.version = "4.0"

Módulo #16
	Nombre: module-position-event-sounds
	Argumento: 
	Contador de uso: n/d
	Propiedades:
		module.author = "Lennart Poettering"
		module.description = "Position event sounds between L and R depending on the position on screen of the widget triggering them."
		module.version = "4.0"

Módulo #17
	Nombre: module-filter-heuristics
	Argumento: 
	Contador de uso: n/d
	Propiedades:
		module.author = "Colin Guthrie"
		module.description = "Detect when various filters are desirable"
		module.version = "4.0"

Módulo #18
	Nombre: module-filter-apply
	Argumento: 
	Contador de uso: n/d
	Propiedades:
		module.author = "Colin Guthrie"
		module.description = "Load filter sinks automatically when needed"
		module.version = "4.0"

Módulo #19
	Nombre: module-x11-publish
	Argumento: display=:0
	Contador de uso: n/d
	Propiedades:
		module.author = "Lennart Poettering"
		module.description = "X11 credential publisher"
		module.version = "4.0"

Módulo #20
	Nombre: module-x11-bell
	Argumento: display=:0 sample=bell.ogg
	Contador de uso: n/d
	Propiedades:
		module.author = "Lennart Poettering"
		module.description = "X11 bell interceptor"
		module.version = "4.0"

Módulo #21
	Nombre: module-x11-cork-request
	Argumento: display=:0
	Contador de uso: n/d
	Propiedades:
		module.author = "Lennart Poettering"
		module.description = "Synthesize X11 media key events when cork/uncork is requested"
		module.version = "4.0"

Módulo #22
	Nombre: module-x11-xsmp
	Argumento: display=:0 session_manager=local/ceibal:@/tmp/.ICE-unix/1333,unix/ceibal:/tmp/.ICE-unix/1333
	Contador de uso: n/d
	Propiedades:
		module.author = "Lennart Poettering"
		module.description = "X11 session management"
		module.version = "4.0"

Destino #0
	Estado: SUSPENDED
	Nombre: alsa_output.pci-0000_00_1b.0.analog-stereo
	Descripción: Audio Interno Estéreo analógico
	Controlador: module-alsa-card.c
	Especificación de muestra: s16le 2ch 48000Hz
	Asignación de canal: front-left,front-right
	Módulo propietario: 5
	Silencio: no
	Volumen: 0:  82% 1:  82%
	        0: -5,03 dB 1: -5,03 dB
	        balance 0,00
	Volumen base: 100%
	             0,00 dB
	Origen de monitor: alsa_output.pci-0000_00_1b.0.analog-stereo.monitor
	Latencia: 0 usec, configurada 0 usec
	Marcas: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY 
	Propiedades:
		alsa.resolution_bits = "16"
		device.api = "alsa"
		device.class = "sound"
		alsa.class = "generic"
		alsa.subclass = "generic-mix"
		alsa.name = "VT1802 Analog"
		alsa.id = "VT1802 Analog"
		alsa.subdevice = "0"
		alsa.subdevice_name = "subdevice #0"
		alsa.device = "0"
		alsa.card = "0"
		alsa.card_name = "HDA Intel PCH"
		alsa.long_card_name = "HDA Intel PCH at 0xd0810000 irq 93"
		alsa.driver_name = "snd_hda_intel"
		device.bus_path = "pci-0000:00:1b.0"
		sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card0"
		device.bus = "pci"
		device.vendor.id = "8086"
		device.vendor.name = "Intel Corporation"
		device.product.id = "0f04"
		device.product.name = "ValleyView High Definition Audio Controller"
		device.form_factor = "internal"
		device.string = "front:0"
		device.buffering.buffer_size = "65536"
		device.buffering.fragment_size = "32768"
		device.access_mode = "mmap+timer"
		device.profile.name = "analog-stereo"
		device.profile.description = "Estéreo analógico"
		device.description = "Audio Interno Estéreo analógico"
		alsa.mixer_name = "VIA VT1802"
		alsa.components = "HDA:11068446,15585471,00100000 HDA:80862882,80860101,00100000"
		module-udev-detect.discovered = "1"
		device.icon_name = "audio-card-pci"
	Puertos:
		analog-output-speaker: Altavoces (priority: 10000)
		analog-output-headphones: Auriculares analógicos (priority: 9000, not available)
	Puerto Activo: analog-output-speaker
	Formatos:
		pcm

Fuente #0
	Estado: SUSPENDED
	Nombre: alsa_output.pci-0000_00_1b.0.analog-stereo.monitor
	Descripción: Monitor of Audio Interno Estéreo analógico
	Controlador: module-alsa-card.c
	Especificación de la Muestra: s16le 2ch 44100Hz
	Mapa del Canal: front-left,front-right
	Módulo Dueño: 5
	Mudo: no
	Volume: 0: 100% 1: 100%
	        0: 0,00 dB 1: 0,00 dB
	        balance 0,00
	Volume Base: 100%
	             0,00 dB
	Monitoreo del destino: alsa_output.pci-0000_00_1b.0.analog-stereo
	Latencia: 0 usec, configurado 0 useg
	Banderas: DECIBEL_VOLUME LATENCY 
	Propiedades:
		device.description = "Monitor of Audio Interno Estéreo analógico"
		device.class = "monitor"
		alsa.card = "0"
		alsa.card_name = "HDA Intel PCH"
		alsa.long_card_name = "HDA Intel PCH at 0xd0810000 irq 93"
		alsa.driver_name = "snd_hda_intel"
		device.bus_path = "pci-0000:00:1b.0"
		sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card0"
		device.bus = "pci"
		device.vendor.id = "8086"
		device.vendor.name = "Intel Corporation"
		device.product.id = "0f04"
		device.product.name = "ValleyView High Definition Audio Controller"
		device.form_factor = "internal"
		device.string = "0"
		module-udev-detect.discovered = "1"
		device.icon_name = "audio-card-pci"
	Formatos:
		pcm

Fuente #1
	Estado: SUSPENDED
	Nombre: alsa_input.pci-0000_00_1b.0.analog-stereo
	Descripción: Audio Interno Estéreo analógico
	Controlador: module-alsa-card.c
	Especificación de la Muestra: s16le 2ch 44100Hz
	Mapa del Canal: front-left,front-right
	Módulo Dueño: 5
	Mudo: no
	Volume: 0:  16% 1:  16%
	        0: -48,00 dB 1: -48,00 dB
	        balance 0,00
	Volume Base:   8%
	             -66,00 dB
	Monitoreo del destino: n/d
	Latencia: 0 usec, configurado 0 useg
	Banderas: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY 
	Propiedades:
		alsa.resolution_bits = "16"
		device.api = "alsa"
		device.class = "sound"
		alsa.class = "generic"
		alsa.subclass = "generic-mix"
		alsa.name = "VT1802 Analog"
		alsa.id = "VT1802 Analog"
		alsa.subdevice = "0"
		alsa.subdevice_name = "subdevice #0"
		alsa.device = "0"
		alsa.card = "0"
		alsa.card_name = "HDA Intel PCH"
		alsa.long_card_name = "HDA Intel PCH at 0xd0810000 irq 93"
		alsa.driver_name = "snd_hda_intel"
		device.bus_path = "pci-0000:00:1b.0"
		sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card0"
		device.bus = "pci"
		device.vendor.id = "8086"
		device.vendor.name = "Intel Corporation"
		device.product.id = "0f04"
		device.product.name = "ValleyView High Definition Audio Controller"
		device.form_factor = "internal"
		device.string = "front:0"
		device.buffering.buffer_size = "65536"
		device.buffering.fragment_size = "32768"
		device.access_mode = "mmap+timer"
		device.profile.name = "analog-stereo"
		device.profile.description = "Estéreo analógico"
		device.description = "Audio Interno Estéreo analógico"
		alsa.mixer_name = "VIA VT1802"
		alsa.components = "HDA:11068446,15585471,00100000 HDA:80862882,80860101,00100000"
		module-udev-detect.discovered = "1"
		device.icon_name = "audio-card-pci"
	Puertos:
		analog-input-microphone-internal: Micrófono interno (priority: 8900)
		analog-input-microphone: Micrófono (priority: 8700, not available)
	Puerto Activo: analog-input-microphone-internal
	Formatos:
		pcm

Salida de origen #3
	Disco: protocol-native.c
	Módulo propietario: 9
	Cliente: 21
	Destino: 1
	Especificación de sample: float32le 1ch 25Hz
	Mapa de canal: mono
	Formato: pcm, format.sample_format = "\"float32le\""  format.rate = "25"  format.channels = "1"  format.channel_map = "\"mono\""
	Corked: no
	Mute: no
	Volumen: 0: 100%
	        0: 0,00 dB
	        balance 0,00
	Latencia de búfer: 0 usec
	Latencia de destino: 0 usec
	Método de resample: peaks
	Propiedades:
		application.id = "org.gnome.VolumeControl"
		media.name = "DeteccioÌ?n de picos"
		application.name = "GNOME Volume Control Dialog"
		native-protocol.peer = "UNIX socket client"
		native-protocol.version = "28"
		application.icon_name = "multimedia-volume-control"
		application.version = "3.6.3"
		application.process.id = "2188"
		application.process.user = "ceibal"
		application.process.host = "ceibal"
		application.process.binary = "gnome-control-center.real"
		application.language = "es_UY.UTF-8"
		window.x11.display = ":0"
		application.process.machine_id = "7fa399cd946674ed89a5c33856b0fa6b"
		application.process.session_id = "c1"
		module-stream-restore.id = "source-output-by-application-id:org.gnome.VolumeControl"

Salida de origen #4
	Disco: protocol-native.c
	Módulo propietario: 9
	Cliente: 22
	Destino: 1
	Especificación de sample: s16le 2ch 44100Hz
	Mapa de canal: front-left,front-right
	Formato: pcm, format.sample_format = "\"s16le\""  format.rate = "44100"  format.channels = "2"  format.channel_map = "\"front-left,front-right\""
	Corked: no
	Mute: no
	Volumen: 0: 100% 1: 100%
	        0: 0,00 dB 1: 0,00 dB
	        balance 0,00
	Latencia de búfer: 0 usec
	Latencia de destino: 0 usec
	Método de resample: n/d
	Propiedades:
		media.format = "WAV (Microsoft)"
		application.name = "parecord"
		media.name = "test-parecord.wav"
		native-protocol.peer = "UNIX socket client"
		native-protocol.version = "28"
		application.process.id = "2197"
		application.process.user = "ceibal"
		application.process.host = "ceibal"
		application.process.binary = "pacat"
		application.language = "es_UY.UTF-8"
		window.x11.display = ":0"
		application.process.machine_id = "7fa399cd946674ed89a5c33856b0fa6b"
		application.process.session_id = "c1"
		module-stream-restore.id = "source-output-by-application-name:parecord"

Cliente #0
	Controlador: module-systemd-login.c
	Módulo dueño: 15
	Propiedades:
		application.name = "Login Session c1"
		systemd-login.session = "c1"

Cliente #3
	Controlador: protocol-native.c
	Módulo dueño: 9
	Propiedades:
		application.name = "GNOME Volume Control Media Keys"
		native-protocol.peer = "UNIX socket client"
		native-protocol.version = "28"
		application.id = "org.gnome.VolumeControl"
		application.icon_name = "multimedia-volume-control"
		application.version = "3.8.6.1"
		application.process.id = "1329"
		application.process.user = "ceibal"
		application.process.host = "ceibal"
		application.process.binary = "gnome-settings-daemon"
		application.language = "es_UY.UTF-8"
		window.x11.display = ":0"
		application.process.machine_id = "7fa399cd946674ed89a5c33856b0fa6b"
		application.process.session_id = "c1"

Cliente #6
	Controlador: module-x11-xsmp.c
	Módulo dueño: 22
	Propiedades:
		application.name = "XSMP Session on gnome-session as 10cb1dd47e63109b80147084399474063800000013330035"
		xsmp.vendor = "gnome-session"
		xsmp.client.id = "10cb1dd47e63109b80147084399474063800000013330035"

Cliente #8
	Controlador: protocol-native.c
	Módulo dueño: 9
	Propiedades:
		application.name = "GNOME Shell"
		native-protocol.peer = "UNIX socket client"
		native-protocol.version = "28"
		application.id = "org.gnome.Shell"
		application.icon_name = "start-here"
		application.language = "es_UY.UTF-8"
		window.x11.screen = "0"
		window.x11.display = ":0"
		application.process.id = "1519"
		application.process.user = "ceibal"
		application.process.host = "ceibal"
		application.process.binary = "gnome-shell"
		application.process.machine_id = "7fa399cd946674ed89a5c33856b0fa6b"
		application.process.session_id = "c1"

Cliente #9
	Controlador: protocol-native.c
	Módulo dueño: 9
	Propiedades:
		application.name = "GNOME Shell Volume Control"
		native-protocol.peer = "UNIX socket client"
		native-protocol.version = "28"
		application.id = "org.gnome.VolumeControl"
		application.icon_name = "multimedia-volume-control"
		application.version = "3.10.4"
		application.process.id = "1519"
		application.process.user = "ceibal"
		application.process.host = "ceibal"
		application.process.binary = "gnome-shell"
		application.language = "es_UY.UTF-8"
		window.x11.display = ":0"
		application.process.machine_id = "7fa399cd946674ed89a5c33856b0fa6b"
		application.process.session_id = "c1"

Cliente #21
	Controlador: protocol-native.c
	Módulo dueño: 9
	Propiedades:
		application.name = "GNOME Volume Control Dialog"
		native-protocol.peer = "UNIX socket client"
		native-protocol.version = "28"
		application.id = "org.gnome.VolumeControl"
		application.icon_name = "multimedia-volume-control"
		application.version = "3.6.3"
		application.process.id = "2188"
		application.process.user = "ceibal"
		application.process.host = "ceibal"
		application.process.binary = "gnome-control-center.real"
		application.language = "es_UY.UTF-8"
		window.x11.display = ":0"
		application.process.machine_id = "7fa399cd946674ed89a5c33856b0fa6b"
		application.process.session_id = "c1"

Cliente #22
	Controlador: protocol-native.c
	Módulo dueño: 9
	Propiedades:
		application.name = "parecord"
		native-protocol.peer = "UNIX socket client"
		native-protocol.version = "28"
		media.format = "WAV (Microsoft)"
		media.name = "test-parecord.wav"
		application.process.id = "2197"
		application.process.user = "ceibal"
		application.process.host = "ceibal"
		application.process.binary = "pacat"
		application.language = "es_UY.UTF-8"
		window.x11.display = ":0"
		application.process.machine_id = "7fa399cd946674ed89a5c33856b0fa6b"
		application.process.session_id = "c1"

Cliente #23
	Controlador: protocol-native.c
	Módulo dueño: 9
	Propiedades:
		application.name = "pactl"
		native-protocol.peer = "UNIX socket client"
		native-protocol.version = "28"
		application.process.id = "2202"
		application.process.user = "ceibal"
		application.process.host = "ceibal"
		application.process.binary = "pactl"
		application.language = "es_UY.UTF-8"
		window.x11.display = ":0"
		application.process.machine_id = "7fa399cd946674ed89a5c33856b0fa6b"
		application.process.session_id = "c1"

Muestra #0
	Nombre: bell-window-system
	Especificaciones de la muestra: s16le 2ch 44100Hz
	Mapa del canal: front-left,front-right
	Volumen: (incorrecto)
	         (incorrecto)
	         balance 0,00
	Duración: 0,1s
	Tamaño: 24,0 KiB
	Lazy: no
	Nombre del archivo: n/d
	Propiedades:
		media.role = "event"
		application.process.id = "2013"
		application.name = "gnome-terminal"
		event.description = "Evento de campana"
		event.id = "bell-window-system"
		media.name = "bell-window-system"
		media.filename = "/usr/share//sounds/freedesktop/stereo/bell.oga"
		native-protocol.peer = "UNIX socket client"
		native-protocol.version = "28"
		application.id = "org.gnome.Shell"
		application.icon_name = "start-here"
		application.language = "es_UY.UTF-8"
		window.x11.screen = "0"
		window.x11.display = ":0"
		application.process.user = "ceibal"
		application.process.host = "ceibal"
		application.process.binary = "gnome-shell"
		application.process.machine_id = "7fa399cd946674ed89a5c33856b0fa6b"
		application.process.session_id = "c1"

Placa #0
	Nombre: alsa_card.pci-0000_00_1b.0
	Controlador: module-alsa-card.c
	Módulo dueño: 5
	Propiedades:
		alsa.card = "0"
		alsa.card_name = "HDA Intel PCH"
		alsa.long_card_name = "HDA Intel PCH at 0xd0810000 irq 93"
		alsa.driver_name = "snd_hda_intel"
		device.bus_path = "pci-0000:00:1b.0"
		sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card0"
		device.bus = "pci"
		device.vendor.id = "8086"
		device.vendor.name = "Intel Corporation"
		device.product.id = "0f04"
		device.product.name = "ValleyView High Definition Audio Controller"
		device.form_factor = "internal"
		device.string = "0"
		device.description = "Audio Interno"
		module-udev-detect.discovered = "1"
		device.icon_name = "audio-card-pci"
	Perfiles:
		input:analog-stereo: Estéreo analógico Entrada (sinks: 0, sources: 1, priority. 60)
		output:analog-stereo: Estéreo analógico Salida (sinks: 1, sources: 0, priority. 6000)
		output:analog-stereo+input:analog-stereo: Estéreo Analógico Dúplex (sinks: 1, sources: 1, priority. 6060)
		output:hdmi-stereo: Digital Stereo (HDMI) Salida (sinks: 1, sources: 0, priority. 5400)
		output:hdmi-stereo+input:analog-stereo: Digital Stereo (HDMI) Salida + Estéreo analógico Entrada (sinks: 1, sources: 1, priority. 5460)
		output:hdmi-surround: Digital Surround 5.1 (HDMI) Salida (sinks: 1, sources: 0, priority. 300)
		output:hdmi-surround+input:analog-stereo: Digital Surround 5.1 (HDMI) Salida + Estéreo analógico Entrada (sinks: 1, sources: 1, priority. 360)
		off: Apagado (sinks: 0, sources: 0, priority. 0)
	Perfil activo: output:analog-stereo+input:analog-stereo
	Puertos:
		analog-input-microphone-internal: Micrófono interno (priority: 8900, latency offset: 0 usec)
			Propiedades:
				device.icon_name = "audio-input-microphone"
			Parte del perfil(es): input:analog-stereo, output:analog-stereo+input:analog-stereo, output:hdmi-stereo+input:analog-stereo, output:hdmi-surround+input:analog-stereo
		analog-input-microphone: Micrófono (priority: 8700, latency offset: 0 usec, not available)
			Propiedades:
				device.icon_name = "audio-input-microphone"
			Parte del perfil(es): input:analog-stereo, output:analog-stereo+input:analog-stereo, output:hdmi-stereo+input:analog-stereo, output:hdmi-surround+input:analog-stereo
		analog-output-speaker: Altavoces (priority: 10000, latency offset: 0 usec)
			Propiedades:
				device.icon_name = "audio-speakers"
			Parte del perfil(es): output:analog-stereo, output:analog-stereo+input:analog-stereo
		analog-output-headphones: Auriculares analógicos (priority: 9000, latency offset: 0 usec, not available)
			Propiedades:
				device.icon_name = "audio-headphones"
			Parte del perfil(es): output:analog-stereo, output:analog-stereo+input:analog-stereo
		hdmi-output-0: HDMI / DisplayPort (priority: 5900, latency offset: 0 usec, not available)
			Propiedades:
				device.icon_name = "video-display"
			Parte del perfil(es): output:hdmi-stereo, output:hdmi-stereo+input:analog-stereo, output:hdmi-surround, output:hdmi-surround+input:analog-stereo
-------------- next part --------------
Módulo #0
	Nombre: module-device-restore
	Argumento: 
	Contador de uso: n/d
	Propiedades:
		module.author = "Lennart Poettering"
		module.description = "Automatically restore the volume/mute state of devices"
		module.version = "4.0"

Módulo #1
	Nombre: module-stream-restore
	Argumento: 
	Contador de uso: n/d
	Propiedades:
		module.author = "Lennart Poettering"
		module.description = "Automatically restore the volume/mute/device state of streams"
		module.version = "4.0"

Módulo #2
	Nombre: module-card-restore
	Argumento: 
	Contador de uso: n/d
	Propiedades:
		module.author = "Lennart Poettering"
		module.description = "Automatically restore profile of cards"
		module.version = "4.0"

Módulo #3
	Nombre: module-augment-properties
	Argumento: 
	Contador de uso: n/d
	Propiedades:
		module.author = "Lennart Poettering"
		module.description = "Augment the property sets of streams with additional static information"
		module.version = "4.0"

Módulo #4
	Nombre: module-switch-on-port-available
	Argumento: 
	Contador de uso: n/d
	Propiedades:
		

Módulo #5
	Nombre: module-alsa-card
	Argumento: device_id="0" name="pci-0000_00_1b.0" card_name="alsa_card.pci-0000_00_1b.0" namereg_fail=false tsched=yes fixed_latency_range=no ignore_dB=no deferred_volume=yes use_ucm=yes card_properties="module-udev-detect.discovered=1"
	Contador de uso: 2
	Propiedades:
		module.author = "Lennart Poettering"
		module.description = "ALSA Card"
		module.version = "4.0"

Módulo #6
	Nombre: module-udev-detect
	Argumento: 
	Contador de uso: n/d
	Propiedades:
		module.author = "Lennart Poettering"
		module.description = "Detect available audio hardware and load matching drivers"
		module.version = "4.0"

Módulo #7
	Nombre: module-bluetooth-policy
	Argumento: 
	Contador de uso: n/d
	Propiedades:
		module.author = "Frédéric Dalleau"
		module.description = "When a bluetooth sink or source is added, load module-loopback"
		module.version = "4.0"

Módulo #8
	Nombre: module-bluetooth-discover
	Argumento: 
	Contador de uso: n/d
	Propiedades:
		module.author = "Joao Paulo Rechi Vita"
		module.description = "Detect available bluetooth audio devices and load bluetooth audio drivers"
		module.version = "4.0"

Módulo #9
	Nombre: module-native-protocol-unix
	Argumento: 
	Contador de uso: n/d
	Propiedades:
		module.author = "Lennart Poettering"
		module.description = "Native protocol (UNIX sockets)"
		module.version = "4.0"

Módulo #10
	Nombre: module-default-device-restore
	Argumento: 
	Contador de uso: n/d
	Propiedades:
		module.author = "Lennart Poettering"
		module.description = "Automatically restore the default sink and source"
		module.version = "4.0"

Módulo #11
	Nombre: module-rescue-streams
	Argumento: 
	Contador de uso: n/d
	Propiedades:
		module.author = "Lennart Poettering"
		module.description = "When a sink/source is removed, try to move their streams to the default sink/source"
		module.version = "4.0"

Módulo #12
	Nombre: module-always-sink
	Argumento: 
	Contador de uso: n/d
	Propiedades:
		module.author = "Colin Guthrie"
		module.description = "Tenga siempre cargado al menos un destino aunque sea uno nulo"
		module.version = "4.0"

Módulo #13
	Nombre: module-intended-roles
	Argumento: 
	Contador de uso: n/d
	Propiedades:
		module.author = "Lennart Poettering"
		module.description = "Automatically set device of streams based of intended roles of devices"
		module.version = "4.0"

Módulo #14
	Nombre: module-suspend-on-idle
	Argumento: 
	Contador de uso: n/d
	Propiedades:
		module.author = "Lennart Poettering"
		module.description = "When a sink/source is idle for too long, suspend it"
		module.version = "4.0"

Módulo #15
	Nombre: module-systemd-login
	Argumento: 
	Contador de uso: n/d
	Propiedades:
		module.author = "Lennart Poettering"
		module.description = "Create a client for each login session of this user"
		module.version = "4.0"

Módulo #16
	Nombre: module-position-event-sounds
	Argumento: 
	Contador de uso: n/d
	Propiedades:
		module.author = "Lennart Poettering"
		module.description = "Position event sounds between L and R depending on the position on screen of the widget triggering them."
		module.version = "4.0"

Módulo #17
	Nombre: module-filter-heuristics
	Argumento: 
	Contador de uso: n/d
	Propiedades:
		module.author = "Colin Guthrie"
		module.description = "Detect when various filters are desirable"
		module.version = "4.0"

Módulo #18
	Nombre: module-filter-apply
	Argumento: 
	Contador de uso: n/d
	Propiedades:
		module.author = "Colin Guthrie"
		module.description = "Load filter sinks automatically when needed"
		module.version = "4.0"

Módulo #19
	Nombre: module-x11-publish
	Argumento: display=:0
	Contador de uso: n/d
	Propiedades:
		module.author = "Lennart Poettering"
		module.description = "X11 credential publisher"
		module.version = "4.0"

Módulo #20
	Nombre: module-x11-bell
	Argumento: display=:0 sample=bell.ogg
	Contador de uso: n/d
	Propiedades:
		module.author = "Lennart Poettering"
		module.description = "X11 bell interceptor"
		module.version = "4.0"

Módulo #21
	Nombre: module-x11-cork-request
	Argumento: display=:0
	Contador de uso: n/d
	Propiedades:
		module.author = "Lennart Poettering"
		module.description = "Synthesize X11 media key events when cork/uncork is requested"
		module.version = "4.0"

Módulo #22
	Nombre: module-x11-xsmp
	Argumento: display=:0 session_manager=local/ceibal:@/tmp/.ICE-unix/1333,unix/ceibal:/tmp/.ICE-unix/1333
	Contador de uso: n/d
	Propiedades:
		module.author = "Lennart Poettering"
		module.description = "X11 session management"
		module.version = "4.0"

Destino #0
	Estado: SUSPENDED
	Nombre: alsa_output.pci-0000_00_1b.0.analog-stereo
	Descripción: Audio Interno Estéreo analógico
	Controlador: module-alsa-card.c
	Especificación de muestra: s16le 2ch 44100Hz
	Asignación de canal: front-left,front-right
	Módulo propietario: 5
	Silencio: no
	Volumen: 0:  82% 1:  82%
	        0: -5,03 dB 1: -5,03 dB
	        balance 0,00
	Volumen base: 100%
	             0,00 dB
	Origen de monitor: alsa_output.pci-0000_00_1b.0.analog-stereo.monitor
	Latencia: 0 usec, configurada 0 usec
	Marcas: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY 
	Propiedades:
		alsa.resolution_bits = "16"
		device.api = "alsa"
		device.class = "sound"
		alsa.class = "generic"
		alsa.subclass = "generic-mix"
		alsa.name = "VT1802 Analog"
		alsa.id = "VT1802 Analog"
		alsa.subdevice = "0"
		alsa.subdevice_name = "subdevice #0"
		alsa.device = "0"
		alsa.card = "0"
		alsa.card_name = "HDA Intel PCH"
		alsa.long_card_name = "HDA Intel PCH at 0xd0810000 irq 93"
		alsa.driver_name = "snd_hda_intel"
		device.bus_path = "pci-0000:00:1b.0"
		sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card0"
		device.bus = "pci"
		device.vendor.id = "8086"
		device.vendor.name = "Intel Corporation"
		device.product.id = "0f04"
		device.product.name = "ValleyView High Definition Audio Controller"
		device.form_factor = "internal"
		device.string = "front:0"
		device.buffering.buffer_size = "65536"
		device.buffering.fragment_size = "32768"
		device.access_mode = "mmap+timer"
		device.profile.name = "analog-stereo"
		device.profile.description = "Estéreo analógico"
		device.description = "Audio Interno Estéreo analógico"
		alsa.mixer_name = "VIA VT1802"
		alsa.components = "HDA:11068446,15585471,00100000 HDA:80862882,80860101,00100000"
		module-udev-detect.discovered = "1"
		device.icon_name = "audio-card-pci"
	Puertos:
		analog-output-speaker: Altavoces (priority: 10000)
		analog-output-headphones: Auriculares analógicos (priority: 9000, not available)
	Puerto Activo: analog-output-speaker
	Formatos:
		pcm

Fuente #0
	Estado: SUSPENDED
	Nombre: alsa_output.pci-0000_00_1b.0.analog-stereo.monitor
	Descripción: Monitor of Audio Interno Estéreo analógico
	Controlador: module-alsa-card.c
	Especificación de la Muestra: s16le 2ch 44100Hz
	Mapa del Canal: front-left,front-right
	Módulo Dueño: 5
	Mudo: no
	Volume: 0: 100% 1: 100%
	        0: 0,00 dB 1: 0,00 dB
	        balance 0,00
	Volume Base: 100%
	             0,00 dB
	Monitoreo del destino: alsa_output.pci-0000_00_1b.0.analog-stereo
	Latencia: 0 usec, configurado 0 useg
	Banderas: DECIBEL_VOLUME LATENCY 
	Propiedades:
		device.description = "Monitor of Audio Interno Estéreo analógico"
		device.class = "monitor"
		alsa.card = "0"
		alsa.card_name = "HDA Intel PCH"
		alsa.long_card_name = "HDA Intel PCH at 0xd0810000 irq 93"
		alsa.driver_name = "snd_hda_intel"
		device.bus_path = "pci-0000:00:1b.0"
		sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card0"
		device.bus = "pci"
		device.vendor.id = "8086"
		device.vendor.name = "Intel Corporation"
		device.product.id = "0f04"
		device.product.name = "ValleyView High Definition Audio Controller"
		device.form_factor = "internal"
		device.string = "0"
		module-udev-detect.discovered = "1"
		device.icon_name = "audio-card-pci"
	Formatos:
		pcm

Fuente #1
	Estado: RUNNING
	Nombre: alsa_input.pci-0000_00_1b.0.analog-stereo
	Descripción: Audio Interno Estéreo analógico
	Controlador: module-alsa-card.c
	Especificación de la Muestra: s16le 2ch 44100Hz
	Mapa del Canal: front-left,front-right
	Módulo Dueño: 5
	Mudo: no
	Volume: 0:  16% 1:  16%
	        0: -48,00 dB 1: -48,00 dB
	        balance 0,00
	Volume Base:   8%
	             -66,00 dB
	Monitoreo del destino: n/d
	Latencia: 0 usec, configurado 20000 useg
	Banderas: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY 
	Propiedades:
		alsa.resolution_bits = "16"
		device.api = "alsa"
		device.class = "sound"
		alsa.class = "generic"
		alsa.subclass = "generic-mix"
		alsa.name = "VT1802 Analog"
		alsa.id = "VT1802 Analog"
		alsa.subdevice = "0"
		alsa.subdevice_name = "subdevice #0"
		alsa.device = "0"
		alsa.card = "0"
		alsa.card_name = "HDA Intel PCH"
		alsa.long_card_name = "HDA Intel PCH at 0xd0810000 irq 93"
		alsa.driver_name = "snd_hda_intel"
		device.bus_path = "pci-0000:00:1b.0"
		sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card0"
		device.bus = "pci"
		device.vendor.id = "8086"
		device.vendor.name = "Intel Corporation"
		device.product.id = "0f04"
		device.product.name = "ValleyView High Definition Audio Controller"
		device.form_factor = "internal"
		device.string = "front:0"
		device.buffering.buffer_size = "65536"
		device.buffering.fragment_size = "32768"
		device.access_mode = "mmap+timer"
		device.profile.name = "analog-stereo"
		device.profile.description = "Estéreo analógico"
		device.description = "Audio Interno Estéreo analógico"
		alsa.mixer_name = "VIA VT1802"
		alsa.components = "HDA:11068446,15585471,00100000 HDA:80862882,80860101,00100000"
		module-udev-detect.discovered = "1"
		device.icon_name = "audio-card-pci"
	Puertos:
		analog-input-microphone-internal: Micrófono interno (priority: 8900)
		analog-input-microphone: Micrófono (priority: 8700, not available)
	Puerto Activo: analog-input-microphone-internal
	Formatos:
		pcm

Salida de origen #1
	Disco: protocol-native.c
	Módulo propietario: 9
	Cliente: 13
	Destino: 1
	Especificación de sample: float32le 1ch 25Hz
	Mapa de canal: mono
	Formato: pcm, format.sample_format = "\"float32le\""  format.rate = "25"  format.channels = "1"  format.channel_map = "\"mono\""
	Corked: no
	Mute: no
	Volumen: 0: 100%
	        0: 0,00 dB
	        balance 0,00
	Latencia de búfer: 0 usec
	Latencia de destino: 79 usec
	Método de resample: peaks
	Propiedades:
		application.id = "org.gnome.VolumeControl"
		media.name = "DeteccioÌ?n de picos"
		application.name = "GNOME Volume Control Dialog"
		native-protocol.peer = "UNIX socket client"
		native-protocol.version = "28"
		application.icon_name = "multimedia-volume-control"
		application.version = "3.6.3"
		application.process.id = "2094"
		application.process.user = "ceibal"
		application.process.host = "ceibal"
		application.process.binary = "gnome-control-center.real"
		application.language = "es_UY.UTF-8"
		window.x11.display = ":0"
		application.process.machine_id = "7fa399cd946674ed89a5c33856b0fa6b"
		application.process.session_id = "c1"
		module-stream-restore.id = "source-output-by-application-id:org.gnome.VolumeControl"

Salida de origen #2
	Disco: protocol-native.c
	Módulo propietario: 9
	Cliente: 15
	Destino: 1
	Especificación de sample: s16le 2ch 44100Hz
	Mapa de canal: front-left,front-right
	Formato: pcm, format.sample_format = "\"s16le\""  format.rate = "44100"  format.channels = "2"  format.channel_map = "\"front-left,front-right\""
	Corked: no
	Mute: no
	Volumen: 0: 100% 1: 100%
	        0: 0,00 dB 1: 0,00 dB
	        balance 0,00
	Latencia de búfer: 0 usec
	Latencia de destino: 134 usec
	Método de resample: n/d
	Propiedades:
		media.format = "WAV (Microsoft)"
		application.name = "parecord"
		media.name = "test-parecord.wav"
		native-protocol.peer = "UNIX socket client"
		native-protocol.version = "28"
		application.process.id = "2105"
		application.process.user = "ceibal"
		application.process.host = "ceibal"
		application.process.binary = "pacat"
		application.language = "es_UY.UTF-8"
		window.x11.display = ":0"
		application.process.machine_id = "7fa399cd946674ed89a5c33856b0fa6b"
		application.process.session_id = "c1"
		module-stream-restore.id = "source-output-by-application-name:parecord"

Cliente #0
	Controlador: module-systemd-login.c
	Módulo dueño: 15
	Propiedades:
		application.name = "Login Session c1"
		systemd-login.session = "c1"

Cliente #3
	Controlador: protocol-native.c
	Módulo dueño: 9
	Propiedades:
		application.name = "GNOME Volume Control Media Keys"
		native-protocol.peer = "UNIX socket client"
		native-protocol.version = "28"
		application.id = "org.gnome.VolumeControl"
		application.icon_name = "multimedia-volume-control"
		application.version = "3.8.6.1"
		application.process.id = "1329"
		application.process.user = "ceibal"
		application.process.host = "ceibal"
		application.process.binary = "gnome-settings-daemon"
		application.language = "es_UY.UTF-8"
		window.x11.display = ":0"
		application.process.machine_id = "7fa399cd946674ed89a5c33856b0fa6b"
		application.process.session_id = "c1"

Cliente #6
	Controlador: module-x11-xsmp.c
	Módulo dueño: 22
	Propiedades:
		application.name = "XSMP Session on gnome-session as 10cb1dd47e63109b80147084399474063800000013330035"
		xsmp.vendor = "gnome-session"
		xsmp.client.id = "10cb1dd47e63109b80147084399474063800000013330035"

Cliente #8
	Controlador: protocol-native.c
	Módulo dueño: 9
	Propiedades:
		application.name = "GNOME Shell"
		native-protocol.peer = "UNIX socket client"
		native-protocol.version = "28"
		application.id = "org.gnome.Shell"
		application.icon_name = "start-here"
		application.language = "es_UY.UTF-8"
		window.x11.screen = "0"
		window.x11.display = ":0"
		application.process.id = "1519"
		application.process.user = "ceibal"
		application.process.host = "ceibal"
		application.process.binary = "gnome-shell"
		application.process.machine_id = "7fa399cd946674ed89a5c33856b0fa6b"
		application.process.session_id = "c1"

Cliente #9
	Controlador: protocol-native.c
	Módulo dueño: 9
	Propiedades:
		application.name = "GNOME Shell Volume Control"
		native-protocol.peer = "UNIX socket client"
		native-protocol.version = "28"
		application.id = "org.gnome.VolumeControl"
		application.icon_name = "multimedia-volume-control"
		application.version = "3.10.4"
		application.process.id = "1519"
		application.process.user = "ceibal"
		application.process.host = "ceibal"
		application.process.binary = "gnome-shell"
		application.language = "es_UY.UTF-8"
		window.x11.display = ":0"
		application.process.machine_id = "7fa399cd946674ed89a5c33856b0fa6b"
		application.process.session_id = "c1"

Cliente #13
	Controlador: protocol-native.c
	Módulo dueño: 9
	Propiedades:
		application.name = "GNOME Volume Control Dialog"
		native-protocol.peer = "UNIX socket client"
		native-protocol.version = "28"
		application.id = "org.gnome.VolumeControl"
		application.icon_name = "multimedia-volume-control"
		application.version = "3.6.3"
		application.process.id = "2094"
		application.process.user = "ceibal"
		application.process.host = "ceibal"
		application.process.binary = "gnome-control-center.real"
		application.language = "es_UY.UTF-8"
		window.x11.display = ":0"
		application.process.machine_id = "7fa399cd946674ed89a5c33856b0fa6b"
		application.process.session_id = "c1"

Cliente #15
	Controlador: protocol-native.c
	Módulo dueño: 9
	Propiedades:
		application.name = "parecord"
		native-protocol.peer = "UNIX socket client"
		native-protocol.version = "28"
		media.format = "WAV (Microsoft)"
		media.name = "test-parecord.wav"
		application.process.id = "2105"
		application.process.user = "ceibal"
		application.process.host = "ceibal"
		application.process.binary = "pacat"
		application.language = "es_UY.UTF-8"
		window.x11.display = ":0"
		application.process.machine_id = "7fa399cd946674ed89a5c33856b0fa6b"
		application.process.session_id = "c1"

Cliente #16
	Controlador: protocol-native.c
	Módulo dueño: 9
	Propiedades:
		application.name = "pactl"
		native-protocol.peer = "UNIX socket client"
		native-protocol.version = "28"
		application.process.id = "2107"
		application.process.user = "ceibal"
		application.process.host = "ceibal"
		application.process.binary = "pactl"
		application.language = "es_UY.UTF-8"
		window.x11.display = ":0"
		application.process.machine_id = "7fa399cd946674ed89a5c33856b0fa6b"
		application.process.session_id = "c1"

Muestra #0
	Nombre: bell-window-system
	Especificaciones de la muestra: s16le 2ch 44100Hz
	Mapa del canal: front-left,front-right
	Volumen: (incorrecto)
	         (incorrecto)
	         balance 0,00
	Duración: 0,1s
	Tamaño: 24,0 KiB
	Lazy: no
	Nombre del archivo: n/d
	Propiedades:
		media.role = "event"
		application.process.id = "2013"
		application.name = "gnome-terminal"
		event.description = "Evento de campana"
		event.id = "bell-window-system"
		media.name = "bell-window-system"
		media.filename = "/usr/share//sounds/freedesktop/stereo/bell.oga"
		native-protocol.peer = "UNIX socket client"
		native-protocol.version = "28"
		application.id = "org.gnome.Shell"
		application.icon_name = "start-here"
		application.language = "es_UY.UTF-8"
		window.x11.screen = "0"
		window.x11.display = ":0"
		application.process.user = "ceibal"
		application.process.host = "ceibal"
		application.process.binary = "gnome-shell"
		application.process.machine_id = "7fa399cd946674ed89a5c33856b0fa6b"
		application.process.session_id = "c1"

Placa #0
	Nombre: alsa_card.pci-0000_00_1b.0
	Controlador: module-alsa-card.c
	Módulo dueño: 5
	Propiedades:
		alsa.card = "0"
		alsa.card_name = "HDA Intel PCH"
		alsa.long_card_name = "HDA Intel PCH at 0xd0810000 irq 93"
		alsa.driver_name = "snd_hda_intel"
		device.bus_path = "pci-0000:00:1b.0"
		sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card0"
		device.bus = "pci"
		device.vendor.id = "8086"
		device.vendor.name = "Intel Corporation"
		device.product.id = "0f04"
		device.product.name = "ValleyView High Definition Audio Controller"
		device.form_factor = "internal"
		device.string = "0"
		device.description = "Audio Interno"
		module-udev-detect.discovered = "1"
		device.icon_name = "audio-card-pci"
	Perfiles:
		input:analog-stereo: Estéreo analógico Entrada (sinks: 0, sources: 1, priority. 60)
		output:analog-stereo: Estéreo analógico Salida (sinks: 1, sources: 0, priority. 6000)
		output:analog-stereo+input:analog-stereo: Estéreo Analógico Dúplex (sinks: 1, sources: 1, priority. 6060)
		output:hdmi-stereo: Digital Stereo (HDMI) Salida (sinks: 1, sources: 0, priority. 5400)
		output:hdmi-stereo+input:analog-stereo: Digital Stereo (HDMI) Salida + Estéreo analógico Entrada (sinks: 1, sources: 1, priority. 5460)
		output:hdmi-surround: Digital Surround 5.1 (HDMI) Salida (sinks: 1, sources: 0, priority. 300)
		output:hdmi-surround+input:analog-stereo: Digital Surround 5.1 (HDMI) Salida + Estéreo analógico Entrada (sinks: 1, sources: 1, priority. 360)
		off: Apagado (sinks: 0, sources: 0, priority. 0)
	Perfil activo: output:analog-stereo+input:analog-stereo
	Puertos:
		analog-input-microphone-internal: Micrófono interno (priority: 8900, latency offset: 0 usec)
			Propiedades:
				device.icon_name = "audio-input-microphone"
			Parte del perfil(es): input:analog-stereo, output:analog-stereo+input:analog-stereo, output:hdmi-stereo+input:analog-stereo, output:hdmi-surround+input:analog-stereo
		analog-input-microphone: Micrófono (priority: 8700, latency offset: 0 usec, not available)
			Propiedades:
				device.icon_name = "audio-input-microphone"
			Parte del perfil(es): input:analog-stereo, output:analog-stereo+input:analog-stereo, output:hdmi-stereo+input:analog-stereo, output:hdmi-surround+input:analog-stereo
		analog-output-speaker: Altavoces (priority: 10000, latency offset: 0 usec)
			Propiedades:
				device.icon_name = "audio-speakers"
			Parte del perfil(es): output:analog-stereo, output:analog-stereo+input:analog-stereo
		analog-output-headphones: Auriculares analógicos (priority: 9000, latency offset: 0 usec, not available)
			Propiedades:
				device.icon_name = "audio-headphones"
			Parte del perfil(es): output:analog-stereo, output:analog-stereo+input:analog-stereo
		hdmi-output-0: HDMI / DisplayPort (priority: 5900, latency offset: 0 usec, not available)
			Propiedades:
				device.icon_name = "video-display"
			Parte del perfil(es): output:hdmi-stereo, output:hdmi-stereo+input:analog-stereo, output:hdmi-surround, output:hdmi-surround+input:analog-stereo


[Index of Archives]     [Linux Audio Users]     [AMD Graphics]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux