On 8/11/16 11:23 AM, Tanu Kaskinen wrote: > On Thu, 2016-08-11 at 09:41 -0300, Gustavo Duarte wrote: >> If the first thing I do after boot, is open settings, the audio >> metter >> shows activity, as following: >> >> 1) Boot >> 2) Open gnome sound settings, audio meter show activity. >> >> If the first thing I do after boot, is record with parecord, the >> record >> work fine, and when open settings after that, audio meter show >> acrivity. >> >> 1) Boot >> 2) parecord >> 3) CTRL+C to close parecord >> 4) A WAV file is generated with sound recoreded. >> 5) Open gnome sound settings, audio meter show activity. >> >> >> In order to get pactl list output while sound settings are open, and >> there's no audio meter activity, i had to break sound as following: >> >> 1) Boot >> 2) Open Skype, call Echo / Sound Test Service. >> 3) Try record a msg. >> 4) No msg was hear. >> 5) Open Gnome sound settings, audio meter no show activity. >> 6) While sound settings is open, get output of pactl. (attach >> after-break-setting-open.pactl) >> 7) Change the volume input level on Gnome setting, just a bit, and >> audio >> meter start to showing activity. >> 8) While sound setting remain open, get output of pactl >> (after-change-level-setting-open.pactl) > The pactl outputs show that you raised the volume from 16% to 20%. Is > that consistent with what you saw in the sound settings UI? The pactl > output doesn't show anything that would be obviously broken in the non- > working case. > > Why is the volume in the broken state sometimes 100% and sometimes 16%? > Does Skype change the volume? If it does, does it also change it if you > put "flat-volumes = no" to ~/.config/pulse/client.conf? I recorded a Video showing Skype try to adjust the volume level, first it increase to 100% and then back to previous value. https://plus.google.com/102144018413535329430/posts/a4DmRJYZ1Ah Also i tried putting flat-volumes = no on client.conf and the same behavior happens. > If you record something with parecord while the sound settings are > open, and the volume meter doesn't move, does that work? > >> After check again, and see the wav file size, I noticed, that >> arecord >> worked. To may playback the wav I had to reboot, let me show you the >> sequence. >> >> 1) boot >> 2) Run pasuspender -- arecord --device=plughw:0 test1.wav >> 3) CTRL+C, to close previous cmd. >> 4) aplay test1.wav. Nothing is hear. >> 5) ls test1.wav show 101662 bytes. >> 6) reboot >> 7) aplay tes1.wav, I can listen the audio recorded. > Weird. If aplay doesn't play the file, does paplay? No, with paplay also I can't listen audio. Seems like, after run pasuspender all the sound system is stop working, also speaker. >> In a short, doing this latest test, is clear that the thing is breaking >> the sound is the Skype, the question is why, and why if change input >> level volume, the problem is fixed ? >> >> Any thought ? > Comparing the system state before and after Skype could show something. > You did a similar test already in the beginning, and that didn't show > anything else than that there were differences in volume, but nothing > was muted, so I don't really expect anything interesting to show up, > but since this is a bit more controlled test than in the beginning, > it's worth a shot. Here are the steps: > > 1) Boot > 2) Open gnome sound settings, verify that the sound meter shows > activity. > 3) Close gnome sound settings. > 4) Run "amixer -c0 > before_skype.amixer". > 5) Run "pactl list > before_skype.pactl". > 6) Open Skype, call Echo / Sound Test Service. > 7) Try record a msg. > 8) No msg was hear. > 9) Run "amixer -c0 > after_skype.amixer". > 10) Run "pactl list > after_skype.pactl". > 11) Open gnome sound settings, verify that the sound meter doesn't show > activity. Attached you can find the outputs files. > -- > Tanu > _______________________________________________ > pulseaudio-discuss mailing list > pulseaudio-discuss at lists.freedesktop.org > https://lists.freedesktop.org/mailman/listinfo/pulseaudio-discuss -------------- next part -------------- Simple mixer control 'Master',0 Capabilities: pvolume pvolume-joined pswitch pswitch-joined Playback channels: Mono Limits: Playback 0 - 42 Mono: Playback 39 [93%] [-4.50dB] [on] Simple mixer control 'Headphone',0 Capabilities: pvolume pswitch Playback channels: Front Left - Front Right Limits: Playback 0 - 42 Mono: Front Left: Playback 42 [100%] [0.00dB] [on] Front Right: Playback 42 [100%] [0.00dB] [on] Simple mixer control 'Speaker',0 Capabilities: pvolume pswitch Playback channels: Front Left - Front Right Limits: Playback 0 - 42 Mono: Front Left: Playback 42 [100%] [0.00dB] [on] Front Right: Playback 42 [100%] [0.00dB] [on] Simple mixer control 'PCM',0 Capabilities: pvolume Playback channels: Front Left - Front Right Limits: Playback 0 - 255 Mono: Front Left: Playback 252 [99%] [-0.60dB] Front Right: Playback 252 [99%] [-0.60dB] Simple mixer control 'Mic',0 Capabilities: pvolume pswitch Playback channels: Front Left - Front Right Limits: Playback 0 - 31 Mono: Front Left: Playback 20 [65%] [-4.50dB] [on] Front Right: Playback 20 [65%] [-4.50dB] [on] Simple mixer control 'Mic Boost',0 Capabilities: volume Playback channels: Front Left - Front Right Capture channels: Front Left - Front Right Limits: 0 - 3 Front Left: 0 [0%] [0.00dB] Front Right: 0 [0%] [0.00dB] Simple mixer control 'IEC958',0 Capabilities: pswitch pswitch-joined Playback channels: Mono Mono: Playback [off] Simple mixer control 'Beep',0 Capabilities: pvolume pvolume-joined pswitch pswitch-joined Playback channels: Mono Limits: Playback 0 - 18 Mono: Playback 0 [0%] [-15.00dB] [off] Simple mixer control 'Capture',0 Capabilities: cvolume cswitch Capture channels: Front Left - Front Right Limits: Capture 0 - 31 Front Left: Capture 15 [48%] [6.00dB] [on] Front Right: Capture 15 [48%] [6.00dB] [on] Simple mixer control 'Auto-Mute Mode',0 Capabilities: enum Items: 'Disabled' 'Enabled' Item0: 'Enabled' Simple mixer control 'Digital',0 Capabilities: cvolume Capture channels: Front Left - Front Right Limits: Capture 0 - 120 Front Left: Capture 60 [50%] [0.00dB] Front Right: Capture 60 [50%] [0.00dB] Simple mixer control 'Dynamic Power-Control',0 Capabilities: enum Items: 'Disabled' 'Enabled' Item0: 'Enabled' Simple mixer control 'Independent HP',0 Capabilities: enum Items: 'Disabled' 'Enabled' Item0: 'Disabled' Simple mixer control 'Internal Mic Boost',0 Capabilities: volume Playback channels: Front Left - Front Right Capture channels: Front Left - Front Right Limits: 0 - 3 Front Left: 1 [33%] [12.00dB] Front Right: 1 [33%] [12.00dB] Simple mixer control 'Loopback Mixing',0 Capabilities: enum Items: 'Disabled' 'Enabled' Item0: 'Disabled' -------------- next part -------------- Módulo #0 Nombre: module-device-restore Argumento: Contador de uso: n/d Propiedades: module.author = "Lennart Poettering" module.description = "Automatically restore the volume/mute state of devices" module.version = "4.0" Módulo #1 Nombre: module-stream-restore Argumento: Contador de uso: n/d Propiedades: module.author = "Lennart Poettering" module.description = "Automatically restore the volume/mute/device state of streams" module.version = "4.0" Módulo #2 Nombre: module-card-restore Argumento: Contador de uso: n/d Propiedades: module.author = "Lennart Poettering" module.description = "Automatically restore profile of cards" module.version = "4.0" Módulo #3 Nombre: module-augment-properties Argumento: Contador de uso: n/d Propiedades: module.author = "Lennart Poettering" module.description = "Augment the property sets of streams with additional static information" module.version = "4.0" Módulo #4 Nombre: module-switch-on-port-available Argumento: Contador de uso: n/d Propiedades: Módulo #5 Nombre: module-alsa-card Argumento: device_id="0" name="pci-0000_00_1b.0" card_name="alsa_card.pci-0000_00_1b.0" namereg_fail=false tsched=yes fixed_latency_range=no ignore_dB=no deferred_volume=yes use_ucm=yes card_properties="module-udev-detect.discovered=1" Contador de uso: 0 Propiedades: module.author = "Lennart Poettering" module.description = "ALSA Card" module.version = "4.0" Módulo #6 Nombre: module-udev-detect Argumento: Contador de uso: n/d Propiedades: module.author = "Lennart Poettering" module.description = "Detect available audio hardware and load matching drivers" module.version = "4.0" Módulo #7 Nombre: module-bluetooth-policy Argumento: Contador de uso: n/d Propiedades: module.author = "Frédéric Dalleau" module.description = "When a bluetooth sink or source is added, load module-loopback" module.version = "4.0" Módulo #8 Nombre: module-bluetooth-discover Argumento: Contador de uso: n/d Propiedades: module.author = "Joao Paulo Rechi Vita" module.description = "Detect available bluetooth audio devices and load bluetooth audio drivers" module.version = "4.0" Módulo #9 Nombre: module-native-protocol-unix Argumento: Contador de uso: n/d Propiedades: module.author = "Lennart Poettering" module.description = "Native protocol (UNIX sockets)" module.version = "4.0" Módulo #10 Nombre: module-default-device-restore Argumento: Contador de uso: n/d Propiedades: module.author = "Lennart Poettering" module.description = "Automatically restore the default sink and source" module.version = "4.0" Módulo #11 Nombre: module-rescue-streams Argumento: Contador de uso: n/d Propiedades: module.author = "Lennart Poettering" module.description = "When a sink/source is removed, try to move their streams to the default sink/source" module.version = "4.0" Módulo #12 Nombre: module-always-sink Argumento: Contador de uso: n/d Propiedades: module.author = "Colin Guthrie" module.description = "Tenga siempre cargado al menos un destino aunque sea uno nulo" module.version = "4.0" Módulo #13 Nombre: module-intended-roles Argumento: Contador de uso: n/d Propiedades: module.author = "Lennart Poettering" module.description = "Automatically set device of streams based of intended roles of devices" module.version = "4.0" Módulo #14 Nombre: module-suspend-on-idle Argumento: Contador de uso: n/d Propiedades: module.author = "Lennart Poettering" module.description = "When a sink/source is idle for too long, suspend it" module.version = "4.0" Módulo #15 Nombre: module-systemd-login Argumento: Contador de uso: n/d Propiedades: module.author = "Lennart Poettering" module.description = "Create a client for each login session of this user" module.version = "4.0" Módulo #16 Nombre: module-position-event-sounds Argumento: Contador de uso: n/d Propiedades: module.author = "Lennart Poettering" module.description = "Position event sounds between L and R depending on the position on screen of the widget triggering them." module.version = "4.0" Módulo #17 Nombre: module-filter-heuristics Argumento: Contador de uso: n/d Propiedades: module.author = "Colin Guthrie" module.description = "Detect when various filters are desirable" module.version = "4.0" Módulo #18 Nombre: module-filter-apply Argumento: Contador de uso: n/d Propiedades: module.author = "Colin Guthrie" module.description = "Load filter sinks automatically when needed" module.version = "4.0" Módulo #19 Nombre: module-x11-publish Argumento: display=:0 Contador de uso: n/d Propiedades: module.author = "Lennart Poettering" module.description = "X11 credential publisher" module.version = "4.0" Módulo #20 Nombre: module-x11-bell Argumento: display=:0 sample=bell.ogg Contador de uso: n/d Propiedades: module.author = "Lennart Poettering" module.description = "X11 bell interceptor" module.version = "4.0" Módulo #21 Nombre: module-x11-cork-request Argumento: display=:0 Contador de uso: n/d Propiedades: module.author = "Lennart Poettering" module.description = "Synthesize X11 media key events when cork/uncork is requested" module.version = "4.0" Módulo #22 Nombre: module-x11-xsmp Argumento: display=:0 session_manager=local/ceibal:@/tmp/.ICE-unix/1326,unix/ceibal:/tmp/.ICE-unix/1326 Contador de uso: n/d Propiedades: module.author = "Lennart Poettering" module.description = "X11 session management" module.version = "4.0" Destino #0 Estado: SUSPENDED Nombre: alsa_output.pci-0000_00_1b.0.analog-stereo Descripción: Audio Interno Estéreo analógico Controlador: module-alsa-card.c Especificación de muestra: s16le 2ch 48000Hz Asignación de canal: front-left,front-right Módulo propietario: 5 Silencio: no Volumen: 0: 82% 1: 82% 0: -5,03 dB 1: -5,03 dB balance 0,00 Volumen base: 100% 0,00 dB Origen de monitor: alsa_output.pci-0000_00_1b.0.analog-stereo.monitor Latencia: 0 usec, configurada 0 usec Marcas: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY Propiedades: alsa.resolution_bits = "16" device.api = "alsa" device.class = "sound" alsa.class = "generic" alsa.subclass = "generic-mix" alsa.name = "VT1802 Analog" alsa.id = "VT1802 Analog" alsa.subdevice = "0" alsa.subdevice_name = "subdevice #0" alsa.device = "0" alsa.card = "0" alsa.card_name = "HDA Intel PCH" alsa.long_card_name = "HDA Intel PCH at 0xd0810000 irq 94" alsa.driver_name = "snd_hda_intel" device.bus_path = "pci-0000:00:1b.0" sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card0" device.bus = "pci" device.vendor.id = "8086" device.vendor.name = "Intel Corporation" device.product.id = "0f04" device.product.name = "ValleyView High Definition Audio Controller" device.form_factor = "internal" device.string = "front:0" device.buffering.buffer_size = "65536" device.buffering.fragment_size = "32768" device.access_mode = "mmap+timer" device.profile.name = "analog-stereo" device.profile.description = "Estéreo analógico" device.description = "Audio Interno Estéreo analógico" alsa.mixer_name = "VIA VT1802" alsa.components = "HDA:11068446,15585471,00100000 HDA:80862882,80860101,00100000" module-udev-detect.discovered = "1" device.icon_name = "audio-card-pci" Puertos: analog-output-speaker: Altavoces (priority: 10000) analog-output-headphones: Auriculares analógicos (priority: 9000, not available) Puerto Activo: analog-output-speaker Formatos: pcm Fuente #0 Estado: SUSPENDED Nombre: alsa_output.pci-0000_00_1b.0.analog-stereo.monitor Descripción: Monitor of Audio Interno Estéreo analógico Controlador: module-alsa-card.c Especificación de la Muestra: s16le 2ch 44100Hz Mapa del Canal: front-left,front-right Módulo Dueño: 5 Mudo: no Volume: 0: 100% 1: 100% 0: 0,00 dB 1: 0,00 dB balance 0,00 Volume Base: 100% 0,00 dB Monitoreo del destino: alsa_output.pci-0000_00_1b.0.analog-stereo Latencia: 0 usec, configurado 0 useg Banderas: DECIBEL_VOLUME LATENCY Propiedades: device.description = "Monitor of Audio Interno Estéreo analógico" device.class = "monitor" alsa.card = "0" alsa.card_name = "HDA Intel PCH" alsa.long_card_name = "HDA Intel PCH at 0xd0810000 irq 94" alsa.driver_name = "snd_hda_intel" device.bus_path = "pci-0000:00:1b.0" sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card0" device.bus = "pci" device.vendor.id = "8086" device.vendor.name = "Intel Corporation" device.product.id = "0f04" device.product.name = "ValleyView High Definition Audio Controller" device.form_factor = "internal" device.string = "0" module-udev-detect.discovered = "1" device.icon_name = "audio-card-pci" Formatos: pcm Fuente #1 Estado: SUSPENDED Nombre: alsa_input.pci-0000_00_1b.0.analog-stereo Descripción: Audio Interno Estéreo analógico Controlador: module-alsa-card.c Especificación de la Muestra: s16le 2ch 48000Hz Mapa del Canal: front-left,front-right Módulo Dueño: 5 Mudo: no Volume: 0: 16% 1: 16% 0: -47,06 dB 1: -47,06 dB balance 0,00 Volume Base: 8% -66,00 dB Monitoreo del destino: n/d Latencia: 0 usec, configurado 0 useg Banderas: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY Propiedades: alsa.resolution_bits = "16" device.api = "alsa" device.class = "sound" alsa.class = "generic" alsa.subclass = "generic-mix" alsa.name = "VT1802 Analog" alsa.id = "VT1802 Analog" alsa.subdevice = "0" alsa.subdevice_name = "subdevice #0" alsa.device = "0" alsa.card = "0" alsa.card_name = "HDA Intel PCH" alsa.long_card_name = "HDA Intel PCH at 0xd0810000 irq 94" alsa.driver_name = "snd_hda_intel" device.bus_path = "pci-0000:00:1b.0" sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card0" device.bus = "pci" device.vendor.id = "8086" device.vendor.name = "Intel Corporation" device.product.id = "0f04" device.product.name = "ValleyView High Definition Audio Controller" device.form_factor = "internal" device.string = "front:0" device.buffering.buffer_size = "65536" device.buffering.fragment_size = "32768" device.access_mode = "mmap+timer" device.profile.name = "analog-stereo" device.profile.description = "Estéreo analógico" device.description = "Audio Interno Estéreo analógico" alsa.mixer_name = "VIA VT1802" alsa.components = "HDA:11068446,15585471,00100000 HDA:80862882,80860101,00100000" module-udev-detect.discovered = "1" device.icon_name = "audio-card-pci" Puertos: analog-input-microphone-internal: Micrófono interno (priority: 8900) analog-input-microphone: Micrófono (priority: 8700, not available) Puerto Activo: analog-input-microphone-internal Formatos: pcm Cliente #0 Controlador: module-systemd-login.c Módulo dueño: 15 Propiedades: application.name = "Login Session c1" systemd-login.session = "c1" Cliente #4 Controlador: protocol-native.c Módulo dueño: 9 Propiedades: application.name = "GNOME Volume Control Media Keys" native-protocol.peer = "UNIX socket client" native-protocol.version = "28" application.id = "org.gnome.VolumeControl" application.icon_name = "multimedia-volume-control" application.version = "3.8.6.1" application.process.id = "1318" application.process.user = "ceibal" application.process.host = "ceibal" application.process.binary = "gnome-settings-daemon" application.language = "es_UY.UTF-8" window.x11.display = ":0" application.process.machine_id = "7fa399cd946674ed89a5c33856b0fa6b" application.process.session_id = "c1" Cliente #6 Controlador: module-x11-xsmp.c Módulo dueño: 22 Propiedades: application.name = "XSMP Session on gnome-session as 10eb95cf0aaa3a4501147092587898494200000013260035" xsmp.vendor = "gnome-session" xsmp.client.id = "10eb95cf0aaa3a4501147092587898494200000013260035" Cliente #7 Controlador: protocol-native.c Módulo dueño: 9 Propiedades: application.name = "GNOME Shell" native-protocol.peer = "UNIX socket client" native-protocol.version = "28" application.id = "org.gnome.Shell" application.icon_name = "start-here" application.language = "es_UY.UTF-8" window.x11.screen = "0" window.x11.display = ":0" application.process.id = "1536" application.process.user = "ceibal" application.process.host = "ceibal" application.process.binary = "gnome-shell" application.process.machine_id = "7fa399cd946674ed89a5c33856b0fa6b" application.process.session_id = "c1" Cliente #8 Controlador: protocol-native.c Módulo dueño: 9 Propiedades: application.name = "GNOME Shell Volume Control" native-protocol.peer = "UNIX socket client" native-protocol.version = "28" application.id = "org.gnome.VolumeControl" application.icon_name = "multimedia-volume-control" application.version = "3.10.4" application.process.id = "1536" application.process.user = "ceibal" application.process.host = "ceibal" application.process.binary = "gnome-shell" application.language = "es_UY.UTF-8" window.x11.display = ":0" application.process.machine_id = "7fa399cd946674ed89a5c33856b0fa6b" application.process.session_id = "c1" Cliente #11 Controlador: protocol-native.c Módulo dueño: 9 Propiedades: application.name = "Skype" native-protocol.peer = "UNIX socket client" native-protocol.version = "28" application.process.id = "2082" application.process.user = "ceibal" application.process.host = "ceibal" application.process.binary = "skype" application.language = "es_UY.UTF-8" window.x11.display = ":0" application.process.machine_id = "7fa399cd946674ed89a5c33856b0fa6b" application.process.session_id = "c1" application.icon_name = "skype.png" Cliente #12 Controlador: protocol-native.c Módulo dueño: 9 Propiedades: application.name = "pactl" native-protocol.peer = "UNIX socket client" native-protocol.version = "28" application.process.id = "2161" application.process.user = "ceibal" application.process.host = "ceibal" application.process.binary = "pactl" application.language = "es_UY.UTF-8" window.x11.display = ":0" application.process.machine_id = "7fa399cd946674ed89a5c33856b0fa6b" application.process.session_id = "c1" Muestra #0 Nombre: bell-window-system Especificaciones de la muestra: s16le 2ch 44100Hz Mapa del canal: front-left,front-right Volumen: (incorrecto) (incorrecto) balance 0,00 Duración: 0,1s Tamaño: 24,0 KiB Lazy: no Nombre del archivo: n/d Propiedades: media.role = "event" application.process.id = "2045" application.name = "gnome-terminal" event.description = "Evento de campana" event.id = "bell-window-system" media.name = "bell-window-system" media.filename = "/usr/share//sounds/freedesktop/stereo/bell.oga" native-protocol.peer = "UNIX socket client" native-protocol.version = "28" application.id = "org.gnome.Shell" application.icon_name = "start-here" application.language = "es_UY.UTF-8" window.x11.screen = "0" window.x11.display = ":0" application.process.user = "ceibal" application.process.host = "ceibal" application.process.binary = "gnome-shell" application.process.machine_id = "7fa399cd946674ed89a5c33856b0fa6b" application.process.session_id = "c1" Placa #0 Nombre: alsa_card.pci-0000_00_1b.0 Controlador: module-alsa-card.c Módulo dueño: 5 Propiedades: alsa.card = "0" alsa.card_name = "HDA Intel PCH" alsa.long_card_name = "HDA Intel PCH at 0xd0810000 irq 94" alsa.driver_name = "snd_hda_intel" device.bus_path = "pci-0000:00:1b.0" sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card0" device.bus = "pci" device.vendor.id = "8086" device.vendor.name = "Intel Corporation" device.product.id = "0f04" device.product.name = "ValleyView High Definition Audio Controller" device.form_factor = "internal" device.string = "0" device.description = "Audio Interno" module-udev-detect.discovered = "1" device.icon_name = "audio-card-pci" Perfiles: input:analog-stereo: Estéreo analógico Entrada (sinks: 0, sources: 1, priority. 60) output:analog-stereo: Estéreo analógico Salida (sinks: 1, sources: 0, priority. 6000) output:analog-stereo+input:analog-stereo: Estéreo Analógico Dúplex (sinks: 1, sources: 1, priority. 6060) output:hdmi-stereo: Digital Stereo (HDMI) Salida (sinks: 1, sources: 0, priority. 5400) output:hdmi-stereo+input:analog-stereo: Digital Stereo (HDMI) Salida + Estéreo analógico Entrada (sinks: 1, sources: 1, priority. 5460) output:hdmi-surround: Digital Surround 5.1 (HDMI) Salida (sinks: 1, sources: 0, priority. 300) output:hdmi-surround+input:analog-stereo: Digital Surround 5.1 (HDMI) Salida + Estéreo analógico Entrada (sinks: 1, sources: 1, priority. 360) off: Apagado (sinks: 0, sources: 0, priority. 0) Perfil activo: output:analog-stereo+input:analog-stereo Puertos: analog-input-microphone-internal: Micrófono interno (priority: 8900, latency offset: 0 usec) Propiedades: device.icon_name = "audio-input-microphone" Parte del perfil(es): input:analog-stereo, output:analog-stereo+input:analog-stereo, output:hdmi-stereo+input:analog-stereo, output:hdmi-surround+input:analog-stereo analog-input-microphone: Micrófono (priority: 8700, latency offset: 0 usec, not available) Propiedades: device.icon_name = "audio-input-microphone" Parte del perfil(es): input:analog-stereo, output:analog-stereo+input:analog-stereo, output:hdmi-stereo+input:analog-stereo, output:hdmi-surround+input:analog-stereo analog-output-speaker: Altavoces (priority: 10000, latency offset: 0 usec) Propiedades: device.icon_name = "audio-speakers" Parte del perfil(es): output:analog-stereo, output:analog-stereo+input:analog-stereo analog-output-headphones: Auriculares analógicos (priority: 9000, latency offset: 0 usec, not available) Propiedades: device.icon_name = "audio-headphones" Parte del perfil(es): output:analog-stereo, output:analog-stereo+input:analog-stereo hdmi-output-0: HDMI / DisplayPort (priority: 5900, latency offset: 0 usec, not available) Propiedades: device.icon_name = "video-display" Parte del perfil(es): output:hdmi-stereo, output:hdmi-stereo+input:analog-stereo, output:hdmi-surround, output:hdmi-surround+input:analog-stereo -------------- next part -------------- Simple mixer control 'Master',0 Capabilities: pvolume pvolume-joined pswitch pswitch-joined Playback channels: Mono Limits: Playback 0 - 42 Mono: Playback 39 [93%] [-4.50dB] [on] Simple mixer control 'Headphone',0 Capabilities: pvolume pswitch Playback channels: Front Left - Front Right Limits: Playback 0 - 42 Mono: Front Left: Playback 42 [100%] [0.00dB] [on] Front Right: Playback 42 [100%] [0.00dB] [on] Simple mixer control 'Speaker',0 Capabilities: pvolume pswitch Playback channels: Front Left - Front Right Limits: Playback 0 - 42 Mono: Front Left: Playback 42 [100%] [0.00dB] [on] Front Right: Playback 42 [100%] [0.00dB] [on] Simple mixer control 'PCM',0 Capabilities: pvolume Playback channels: Front Left - Front Right Limits: Playback 0 - 255 Mono: Front Left: Playback 252 [99%] [-0.60dB] Front Right: Playback 252 [99%] [-0.60dB] Simple mixer control 'Mic',0 Capabilities: pvolume pswitch Playback channels: Front Left - Front Right Limits: Playback 0 - 31 Mono: Front Left: Playback 20 [65%] [-4.50dB] [on] Front Right: Playback 20 [65%] [-4.50dB] [on] Simple mixer control 'Mic Boost',0 Capabilities: volume Playback channels: Front Left - Front Right Capture channels: Front Left - Front Right Limits: 0 - 3 Front Left: 0 [0%] [0.00dB] Front Right: 0 [0%] [0.00dB] Simple mixer control 'IEC958',0 Capabilities: pswitch pswitch-joined Playback channels: Mono Mono: Playback [off] Simple mixer control 'Beep',0 Capabilities: pvolume pvolume-joined pswitch pswitch-joined Playback channels: Mono Limits: Playback 0 - 18 Mono: Playback 0 [0%] [-15.00dB] [off] Simple mixer control 'Capture',0 Capabilities: cvolume cswitch Capture channels: Front Left - Front Right Limits: Capture 0 - 31 Front Left: Capture 11 [35%] [0.00dB] [on] Front Right: Capture 11 [35%] [0.00dB] [on] Simple mixer control 'Auto-Mute Mode',0 Capabilities: enum Items: 'Disabled' 'Enabled' Item0: 'Enabled' Simple mixer control 'Digital',0 Capabilities: cvolume Capture channels: Front Left - Front Right Limits: Capture 0 - 120 Front Left: Capture 60 [50%] [0.00dB] Front Right: Capture 60 [50%] [0.00dB] Simple mixer control 'Dynamic Power-Control',0 Capabilities: enum Items: 'Disabled' 'Enabled' Item0: 'Enabled' Simple mixer control 'Independent HP',0 Capabilities: enum Items: 'Disabled' 'Enabled' Item0: 'Disabled' Simple mixer control 'Internal Mic Boost',0 Capabilities: volume Playback channels: Front Left - Front Right Capture channels: Front Left - Front Right Limits: 0 - 3 Front Left: 2 [67%] [24.00dB] Front Right: 2 [67%] [24.00dB] Simple mixer control 'Loopback Mixing',0 Capabilities: enum Items: 'Disabled' 'Enabled' Item0: 'Disabled' -------------- next part -------------- Módulo #0 Nombre: module-device-restore Argumento: Contador de uso: n/d Propiedades: module.author = "Lennart Poettering" module.description = "Automatically restore the volume/mute state of devices" module.version = "4.0" Módulo #1 Nombre: module-stream-restore Argumento: Contador de uso: n/d Propiedades: module.author = "Lennart Poettering" module.description = "Automatically restore the volume/mute/device state of streams" module.version = "4.0" Módulo #2 Nombre: module-card-restore Argumento: Contador de uso: n/d Propiedades: module.author = "Lennart Poettering" module.description = "Automatically restore profile of cards" module.version = "4.0" Módulo #3 Nombre: module-augment-properties Argumento: Contador de uso: n/d Propiedades: module.author = "Lennart Poettering" module.description = "Augment the property sets of streams with additional static information" module.version = "4.0" Módulo #4 Nombre: module-switch-on-port-available Argumento: Contador de uso: n/d Propiedades: Módulo #5 Nombre: module-alsa-card Argumento: device_id="0" name="pci-0000_00_1b.0" card_name="alsa_card.pci-0000_00_1b.0" namereg_fail=false tsched=yes fixed_latency_range=no ignore_dB=no deferred_volume=yes use_ucm=yes card_properties="module-udev-detect.discovered=1" Contador de uso: 0 Propiedades: module.author = "Lennart Poettering" module.description = "ALSA Card" module.version = "4.0" Módulo #6 Nombre: module-udev-detect Argumento: Contador de uso: n/d Propiedades: module.author = "Lennart Poettering" module.description = "Detect available audio hardware and load matching drivers" module.version = "4.0" Módulo #7 Nombre: module-bluetooth-policy Argumento: Contador de uso: n/d Propiedades: module.author = "Frédéric Dalleau" module.description = "When a bluetooth sink or source is added, load module-loopback" module.version = "4.0" Módulo #8 Nombre: module-bluetooth-discover Argumento: Contador de uso: n/d Propiedades: module.author = "Joao Paulo Rechi Vita" module.description = "Detect available bluetooth audio devices and load bluetooth audio drivers" module.version = "4.0" Módulo #9 Nombre: module-native-protocol-unix Argumento: Contador de uso: n/d Propiedades: module.author = "Lennart Poettering" module.description = "Native protocol (UNIX sockets)" module.version = "4.0" Módulo #10 Nombre: module-default-device-restore Argumento: Contador de uso: n/d Propiedades: module.author = "Lennart Poettering" module.description = "Automatically restore the default sink and source" module.version = "4.0" Módulo #11 Nombre: module-rescue-streams Argumento: Contador de uso: n/d Propiedades: module.author = "Lennart Poettering" module.description = "When a sink/source is removed, try to move their streams to the default sink/source" module.version = "4.0" Módulo #12 Nombre: module-always-sink Argumento: Contador de uso: n/d Propiedades: module.author = "Colin Guthrie" module.description = "Tenga siempre cargado al menos un destino aunque sea uno nulo" module.version = "4.0" Módulo #13 Nombre: module-intended-roles Argumento: Contador de uso: n/d Propiedades: module.author = "Lennart Poettering" module.description = "Automatically set device of streams based of intended roles of devices" module.version = "4.0" Módulo #14 Nombre: module-suspend-on-idle Argumento: Contador de uso: n/d Propiedades: module.author = "Lennart Poettering" module.description = "When a sink/source is idle for too long, suspend it" module.version = "4.0" Módulo #15 Nombre: module-systemd-login Argumento: Contador de uso: n/d Propiedades: module.author = "Lennart Poettering" module.description = "Create a client for each login session of this user" module.version = "4.0" Módulo #16 Nombre: module-position-event-sounds Argumento: Contador de uso: n/d Propiedades: module.author = "Lennart Poettering" module.description = "Position event sounds between L and R depending on the position on screen of the widget triggering them." module.version = "4.0" Módulo #17 Nombre: module-filter-heuristics Argumento: Contador de uso: n/d Propiedades: module.author = "Colin Guthrie" module.description = "Detect when various filters are desirable" module.version = "4.0" Módulo #18 Nombre: module-filter-apply Argumento: Contador de uso: n/d Propiedades: module.author = "Colin Guthrie" module.description = "Load filter sinks automatically when needed" module.version = "4.0" Módulo #19 Nombre: module-x11-publish Argumento: display=:0 Contador de uso: n/d Propiedades: module.author = "Lennart Poettering" module.description = "X11 credential publisher" module.version = "4.0" Módulo #20 Nombre: module-x11-bell Argumento: display=:0 sample=bell.ogg Contador de uso: n/d Propiedades: module.author = "Lennart Poettering" module.description = "X11 bell interceptor" module.version = "4.0" Módulo #21 Nombre: module-x11-cork-request Argumento: display=:0 Contador de uso: n/d Propiedades: module.author = "Lennart Poettering" module.description = "Synthesize X11 media key events when cork/uncork is requested" module.version = "4.0" Módulo #22 Nombre: module-x11-xsmp Argumento: display=:0 session_manager=local/ceibal:@/tmp/.ICE-unix/1326,unix/ceibal:/tmp/.ICE-unix/1326 Contador de uso: n/d Propiedades: module.author = "Lennart Poettering" module.description = "X11 session management" module.version = "4.0" Destino #0 Estado: SUSPENDED Nombre: alsa_output.pci-0000_00_1b.0.analog-stereo Descripción: Audio Interno Estéreo analógico Controlador: module-alsa-card.c Especificación de muestra: s16le 2ch 44100Hz Asignación de canal: front-left,front-right Módulo propietario: 5 Silencio: no Volumen: 0: 82% 1: 82% 0: -5,03 dB 1: -5,03 dB balance 0,00 Volumen base: 100% 0,00 dB Origen de monitor: alsa_output.pci-0000_00_1b.0.analog-stereo.monitor Latencia: 0 usec, configurada 0 usec Marcas: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY Propiedades: alsa.resolution_bits = "16" device.api = "alsa" device.class = "sound" alsa.class = "generic" alsa.subclass = "generic-mix" alsa.name = "VT1802 Analog" alsa.id = "VT1802 Analog" alsa.subdevice = "0" alsa.subdevice_name = "subdevice #0" alsa.device = "0" alsa.card = "0" alsa.card_name = "HDA Intel PCH" alsa.long_card_name = "HDA Intel PCH at 0xd0810000 irq 94" alsa.driver_name = "snd_hda_intel" device.bus_path = "pci-0000:00:1b.0" sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card0" device.bus = "pci" device.vendor.id = "8086" device.vendor.name = "Intel Corporation" device.product.id = "0f04" device.product.name = "ValleyView High Definition Audio Controller" device.form_factor = "internal" device.string = "front:0" device.buffering.buffer_size = "65536" device.buffering.fragment_size = "32768" device.access_mode = "mmap+timer" device.profile.name = "analog-stereo" device.profile.description = "Estéreo analógico" device.description = "Audio Interno Estéreo analógico" alsa.mixer_name = "VIA VT1802" alsa.components = "HDA:11068446,15585471,00100000 HDA:80862882,80860101,00100000" module-udev-detect.discovered = "1" device.icon_name = "audio-card-pci" Puertos: analog-output-speaker: Altavoces (priority: 10000) analog-output-headphones: Auriculares analógicos (priority: 9000, not available) Puerto Activo: analog-output-speaker Formatos: pcm Fuente #0 Estado: SUSPENDED Nombre: alsa_output.pci-0000_00_1b.0.analog-stereo.monitor Descripción: Monitor of Audio Interno Estéreo analógico Controlador: module-alsa-card.c Especificación de la Muestra: s16le 2ch 44100Hz Mapa del Canal: front-left,front-right Módulo Dueño: 5 Mudo: no Volume: 0: 100% 1: 100% 0: 0,00 dB 1: 0,00 dB balance 0,00 Volume Base: 100% 0,00 dB Monitoreo del destino: alsa_output.pci-0000_00_1b.0.analog-stereo Latencia: 0 usec, configurado 0 useg Banderas: DECIBEL_VOLUME LATENCY Propiedades: device.description = "Monitor of Audio Interno Estéreo analógico" device.class = "monitor" alsa.card = "0" alsa.card_name = "HDA Intel PCH" alsa.long_card_name = "HDA Intel PCH at 0xd0810000 irq 94" alsa.driver_name = "snd_hda_intel" device.bus_path = "pci-0000:00:1b.0" sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card0" device.bus = "pci" device.vendor.id = "8086" device.vendor.name = "Intel Corporation" device.product.id = "0f04" device.product.name = "ValleyView High Definition Audio Controller" device.form_factor = "internal" device.string = "0" module-udev-detect.discovered = "1" device.icon_name = "audio-card-pci" Formatos: pcm Fuente #1 Estado: SUSPENDED Nombre: alsa_input.pci-0000_00_1b.0.analog-stereo Descripción: Audio Interno Estéreo analógico Controlador: module-alsa-card.c Especificación de la Muestra: s16le 2ch 44100Hz Mapa del Canal: front-left,front-right Módulo Dueño: 5 Mudo: no Volume: 0: 20% 1: 20% 0: -41,40 dB 1: -41,40 dB balance 0,00 Volume Base: 8% -66,00 dB Monitoreo del destino: n/d Latencia: 0 usec, configurado 0 useg Banderas: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY Propiedades: alsa.resolution_bits = "16" device.api = "alsa" device.class = "sound" alsa.class = "generic" alsa.subclass = "generic-mix" alsa.name = "VT1802 Analog" alsa.id = "VT1802 Analog" alsa.subdevice = "0" alsa.subdevice_name = "subdevice #0" alsa.device = "0" alsa.card = "0" alsa.card_name = "HDA Intel PCH" alsa.long_card_name = "HDA Intel PCH at 0xd0810000 irq 94" alsa.driver_name = "snd_hda_intel" device.bus_path = "pci-0000:00:1b.0" sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card0" device.bus = "pci" device.vendor.id = "8086" device.vendor.name = "Intel Corporation" device.product.id = "0f04" device.product.name = "ValleyView High Definition Audio Controller" device.form_factor = "internal" device.string = "front:0" device.buffering.buffer_size = "65536" device.buffering.fragment_size = "32768" device.access_mode = "mmap+timer" device.profile.name = "analog-stereo" device.profile.description = "Estéreo analógico" device.description = "Audio Interno Estéreo analógico" alsa.mixer_name = "VIA VT1802" alsa.components = "HDA:11068446,15585471,00100000 HDA:80862882,80860101,00100000" module-udev-detect.discovered = "1" device.icon_name = "audio-card-pci" Puertos: analog-input-microphone-internal: Micrófono interno (priority: 8900) analog-input-microphone: Micrófono (priority: 8700, not available) Puerto Activo: analog-input-microphone-internal Formatos: pcm Cliente #0 Controlador: module-systemd-login.c Módulo dueño: 15 Propiedades: application.name = "Login Session c1" systemd-login.session = "c1" Cliente #4 Controlador: protocol-native.c Módulo dueño: 9 Propiedades: application.name = "GNOME Volume Control Media Keys" native-protocol.peer = "UNIX socket client" native-protocol.version = "28" application.id = "org.gnome.VolumeControl" application.icon_name = "multimedia-volume-control" application.version = "3.8.6.1" application.process.id = "1318" application.process.user = "ceibal" application.process.host = "ceibal" application.process.binary = "gnome-settings-daemon" application.language = "es_UY.UTF-8" window.x11.display = ":0" application.process.machine_id = "7fa399cd946674ed89a5c33856b0fa6b" application.process.session_id = "c1" Cliente #6 Controlador: module-x11-xsmp.c Módulo dueño: 22 Propiedades: application.name = "XSMP Session on gnome-session as 10eb95cf0aaa3a4501147092587898494200000013260035" xsmp.vendor = "gnome-session" xsmp.client.id = "10eb95cf0aaa3a4501147092587898494200000013260035" Cliente #7 Controlador: protocol-native.c Módulo dueño: 9 Propiedades: application.name = "GNOME Shell" native-protocol.peer = "UNIX socket client" native-protocol.version = "28" application.id = "org.gnome.Shell" application.icon_name = "start-here" application.language = "es_UY.UTF-8" window.x11.screen = "0" window.x11.display = ":0" application.process.id = "1536" application.process.user = "ceibal" application.process.host = "ceibal" application.process.binary = "gnome-shell" application.process.machine_id = "7fa399cd946674ed89a5c33856b0fa6b" application.process.session_id = "c1" Cliente #8 Controlador: protocol-native.c Módulo dueño: 9 Propiedades: application.name = "GNOME Shell Volume Control" native-protocol.peer = "UNIX socket client" native-protocol.version = "28" application.id = "org.gnome.VolumeControl" application.icon_name = "multimedia-volume-control" application.version = "3.10.4" application.process.id = "1536" application.process.user = "ceibal" application.process.host = "ceibal" application.process.binary = "gnome-shell" application.language = "es_UY.UTF-8" window.x11.display = ":0" application.process.machine_id = "7fa399cd946674ed89a5c33856b0fa6b" application.process.session_id = "c1" Cliente #10 Controlador: protocol-native.c Módulo dueño: 9 Propiedades: application.name = "pactl" native-protocol.peer = "UNIX socket client" native-protocol.version = "28" application.process.id = "2076" application.process.user = "ceibal" application.process.host = "ceibal" application.process.binary = "pactl" application.language = "es_UY.UTF-8" window.x11.display = ":0" application.process.machine_id = "7fa399cd946674ed89a5c33856b0fa6b" application.process.session_id = "c1" Muestra #0 Nombre: bell-window-system Especificaciones de la muestra: s16le 2ch 44100Hz Mapa del canal: front-left,front-right Volumen: (incorrecto) (incorrecto) balance 0,00 Duración: 0,1s Tamaño: 24,0 KiB Lazy: no Nombre del archivo: n/d Propiedades: media.role = "event" application.process.id = "2045" application.name = "gnome-terminal" event.description = "Evento de campana" event.id = "bell-window-system" media.name = "bell-window-system" media.filename = "/usr/share//sounds/freedesktop/stereo/bell.oga" native-protocol.peer = "UNIX socket client" native-protocol.version = "28" application.id = "org.gnome.Shell" application.icon_name = "start-here" application.language = "es_UY.UTF-8" window.x11.screen = "0" window.x11.display = ":0" application.process.user = "ceibal" application.process.host = "ceibal" application.process.binary = "gnome-shell" application.process.machine_id = "7fa399cd946674ed89a5c33856b0fa6b" application.process.session_id = "c1" Placa #0 Nombre: alsa_card.pci-0000_00_1b.0 Controlador: module-alsa-card.c Módulo dueño: 5 Propiedades: alsa.card = "0" alsa.card_name = "HDA Intel PCH" alsa.long_card_name = "HDA Intel PCH at 0xd0810000 irq 94" alsa.driver_name = "snd_hda_intel" device.bus_path = "pci-0000:00:1b.0" sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card0" device.bus = "pci" device.vendor.id = "8086" device.vendor.name = "Intel Corporation" device.product.id = "0f04" device.product.name = "ValleyView High Definition Audio Controller" device.form_factor = "internal" device.string = "0" device.description = "Audio Interno" module-udev-detect.discovered = "1" device.icon_name = "audio-card-pci" Perfiles: input:analog-stereo: Estéreo analógico Entrada (sinks: 0, sources: 1, priority. 60) output:analog-stereo: Estéreo analógico Salida (sinks: 1, sources: 0, priority. 6000) output:analog-stereo+input:analog-stereo: Estéreo Analógico Dúplex (sinks: 1, sources: 1, priority. 6060) output:hdmi-stereo: Digital Stereo (HDMI) Salida (sinks: 1, sources: 0, priority. 5400) output:hdmi-stereo+input:analog-stereo: Digital Stereo (HDMI) Salida + Estéreo analógico Entrada (sinks: 1, sources: 1, priority. 5460) output:hdmi-surround: Digital Surround 5.1 (HDMI) Salida (sinks: 1, sources: 0, priority. 300) output:hdmi-surround+input:analog-stereo: Digital Surround 5.1 (HDMI) Salida + Estéreo analógico Entrada (sinks: 1, sources: 1, priority. 360) off: Apagado (sinks: 0, sources: 0, priority. 0) Perfil activo: output:analog-stereo+input:analog-stereo Puertos: analog-input-microphone-internal: Micrófono interno (priority: 8900, latency offset: 0 usec) Propiedades: device.icon_name = "audio-input-microphone" Parte del perfil(es): input:analog-stereo, output:analog-stereo+input:analog-stereo, output:hdmi-stereo+input:analog-stereo, output:hdmi-surround+input:analog-stereo analog-input-microphone: Micrófono (priority: 8700, latency offset: 0 usec, not available) Propiedades: device.icon_name = "audio-input-microphone" Parte del perfil(es): input:analog-stereo, output:analog-stereo+input:analog-stereo, output:hdmi-stereo+input:analog-stereo, output:hdmi-surround+input:analog-stereo analog-output-speaker: Altavoces (priority: 10000, latency offset: 0 usec) Propiedades: device.icon_name = "audio-speakers" Parte del perfil(es): output:analog-stereo, output:analog-stereo+input:analog-stereo analog-output-headphones: Auriculares analógicos (priority: 9000, latency offset: 0 usec, not available) Propiedades: device.icon_name = "audio-headphones" Parte del perfil(es): output:analog-stereo, output:analog-stereo+input:analog-stereo hdmi-output-0: HDMI / DisplayPort (priority: 5900, latency offset: 0 usec, not available) Propiedades: device.icon_name = "video-display" Parte del perfil(es): output:hdmi-stereo, output:hdmi-stereo+input:analog-stereo, output:hdmi-surround, output:hdmi-surround+input:analog-stereo
