Linux USB Users
[Prev Page][Next Page]
- Re: [PATCH -next] usb: gadget: function: Remove unused declarations
- From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
- Re: [PATCH v15 1/4] usb: Add support for Intel LJCA device
- From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH -next] usb: gadget: function: Remove unused declarations
- From: Andrzej Pietrasiewicz <andrzej.p@xxxxxxxxxxxxx>
- Re: [PATCH v3 5/5] usb: typec: tcpci_rt1711h: Drop CONFIG_OF ifdeffery
- From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
- Re: [PATCH v3 4/5] usb: typec: tcpci_rt1711h: Add enable_pd30_extended_message variable to struct rt1711h_chip_info
- From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
- Re: Advise for adding Nuvoton BMC Synopsys USB 2.0 device controllers to Linux kernel USB Chipidea driver
- From: Peter Chen <peter.chen@xxxxxxxxxx>
- Re: [PATCH v3 3/5] usb: typec: tcpci_rt1711h: Add rxdz_sel variable to struct rt1711h_chip_info
- From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
- Re: [PATCH v3 2/5] usb: typec: tcpci_rt1711h: Convert enum->pointer for data in the match tables
- From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
- Re: [PATCH v3 1/5] usb: typec: tcpci_rt1711h: Remove trailing comma in the terminator entry for OF table
- From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
- Re: [PATCH net] r8152: check budget for r8152_poll()
- From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
- [PATCH net] r8152: check budget for r8152_poll()
- From: Hayes Wang <hayeswang@xxxxxxxxxxx>
- Re: usb: dwc3: some USB devices not working after 6.4.8
- From: Thinh Nguyen <Thinh.Nguyen@xxxxxxxxxxxx>
- Re: DWC3-Gadget: Flickering with ISOC Streaming (UVC) while multiplier set on Superspeed
- From: Thinh Nguyen <Thinh.Nguyen@xxxxxxxxxxxx>
- [PATCH v2 1/3] dt-bindings: usb: Add HPE GXP HUB Controller
- [PATCH v2 2/3] usb: gadget: udc: gxp-udc: add HPE GXP USB HUB support
- [PATCH v2 3/3] MAINTAINERS: add USB HUB support for GXP
- [PATCH v2 0/3] Add USB driver for HPE GXP Architecture
- Re: DWC3-Gadget: Flickering with ISOC Streaming (UVC) while multiplier set on Superspeed
- From: Michael Grzeschik <mgr@xxxxxxxxxxxxxx>
- RE: [PATCH net v2] r8152: avoid the driver drops a lot of packets
- From: Hayes Wang <hayeswang@xxxxxxxxxxx>
- [syzbot] [usb?] WARNING in wdm_rxwork/usb_submit_urb
- From: syzbot <syzbot+44a9ac69913e0758fbc1@xxxxxxxxxxxxxxxxxxxxxxxxx>
- Re: usb: dwc3: some USB devices not working after 6.4.8
- From: Kenta Sato <tosainu.maple@xxxxxxxxx>
- Re: [PATCH net v2] r8152: avoid the driver drops a lot of packets
- From: Jakub Kicinski <kuba@xxxxxxxxxx>
- Re: usb: dwc3: some USB devices not working after 6.4.8
- From: Kenta Sato <tosainu.maple@xxxxxxxxx>
- [Bug 217862] [BUG] Alauda driver causes oops when inserted with card in with transfer buffer is on stack, throws errors if card is inserted afterwards.
- From: bugzilla-daemon@xxxxxxxxxx
- Re: [PATCH v11 03/13] usb: xhci: Move extcaps related macros to respective header file
- From: Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx>
- Re: [PATCH v5 18/32] sound: usb: Introduce QC USB SND offloading support
- From: Takashi Iwai <tiwai@xxxxxxx>
- Re: [PATCH v5 11/32] sound: usb: card: Introduce USB SND platform op callbacks
- From: Takashi Iwai <tiwai@xxxxxxx>
- Re: [PATCH v5 12/32] sound: usb: Export USB SND APIs for modules
- From: Takashi Iwai <tiwai@xxxxxxx>
- Re: [PATCH v11 13/13] arm64: dts: qcom: sa8540-ride: Enable first port of tertiary usb controller
- From: Krishna Kurapati PSSNV <quic_kriskura@xxxxxxxxxxx>
- [Bug 217862] [BUG] Alauda driver causes oops when inserted with card in with transfer buffer is on stack, throws errors if card is inserted afterwards.
- From: bugzilla-daemon@xxxxxxxxxx
- Re: [PATCH net v2] r8152: avoid the driver drops a lot of packets
- From: Jakub Kicinski <kuba@xxxxxxxxxx>
- Re: [PATCH v3] USB: Extend usb_device_speed with new value USB_SPEED_SUPER_PLUS_BY2
- From: Thinh Nguyen <Thinh.Nguyen@xxxxxxxxxxxx>
- Re: DWC3-Gadget: Flickering with ISOC Streaming (UVC) while multiplier set on Superspeed
- From: Thinh Nguyen <Thinh.Nguyen@xxxxxxxxxxxx>
- Re: DWC3-Gadget: Flickering with ISOC Streaming (UVC) while multiplier set on Superspeed
- From: Thinh Nguyen <Thinh.Nguyen@xxxxxxxxxxxx>
- Re: [Linux-stm32] [PATCH] ARM: dts: stm32mp15x: adjust USB OTG gadget tx fifo sizes
- From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
- Re: [PATCH v11 13/13] arm64: dts: qcom: sa8540-ride: Enable first port of tertiary usb controller
- From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
- Re: usb: dwc3: some USB devices not working after 6.4.8
- From: Jisheng Zhang <jszhang@xxxxxxxxxx>
- Re: Disconnect interrupt generation for QC targets when role switch is enabled
- From: Pavan Kondeti <quic_pkondeti@xxxxxxxxxxx>
- [Bug 217862] [BUG] Alauda driver causes oops when inserted with card in with transfer buffer is on stack, throws errors if card is inserted afterwards.
- From: bugzilla-daemon@xxxxxxxxxx
- Re: [RFC PATCH v1 01/12] Revert "drm/sysfs: Link DRM connectors to corresponding Type-C connectors"
- From: Maxime Ripard <mripard@xxxxxxxxxx>
- Re: [RFC PATCH v1 01/12] Revert "drm/sysfs: Link DRM connectors to corresponding Type-C connectors"
- From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
- Re: [RFC PATCH v1 01/12] Revert "drm/sysfs: Link DRM connectors to corresponding Type-C connectors"
- From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
- Re: [RFC PATCH v1 01/12] Revert "drm/sysfs: Link DRM connectors to corresponding Type-C connectors"
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- Re: [RFC PATCH v1 01/12] Revert "drm/sysfs: Link DRM connectors to corresponding Type-C connectors"
- From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
- Re: [PATCH] usb: typec: ucsi: Fix NULL pointer dereference
- From: Mario Limonciello <mario.limonciello@xxxxxxx>
- Re: [PATCH] USB: serial: option: add Telit LE910C4-WWX 0x1035 composition
- From: Daniele Palmas <dnlplm@xxxxxxxxx>
- Re: [PATCH] usb: typec: ucsi: Fix NULL pointer dereference
- From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
- [PATCH] usb: typec: ucsi: Fix NULL pointer dereference
- From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
- Re: ucsi debugfs oops (current Linus pre-6.6-rc1)
- From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
- [PATCH v3 4/5] usb: typec: tcpci_rt1711h: Add enable_pd30_extended_message variable to struct rt1711h_chip_info
- From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
- [PATCH v3 5/5] usb: typec: tcpci_rt1711h: Drop CONFIG_OF ifdeffery
- From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
- [PATCH v3 2/5] usb: typec: tcpci_rt1711h: Convert enum->pointer for data in the match tables
- From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
- [PATCH v3 3/5] usb: typec: tcpci_rt1711h: Add rxdz_sel variable to struct rt1711h_chip_info
- From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
- [PATCH v3 0/5] Match data improvements for rt1711h driver
- From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
- [PATCH v3 1/5] usb: typec: tcpci_rt1711h: Remove trailing comma in the terminator entry for OF table
- From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
- [PATCH v3] usb: typec: intel_pmc_mux: enable sysfs usb role access
- From: Uday M Bhat <uday.m.bhat@xxxxxxxxx>
- Re: DWC3-Gadget: Flickering with ISOC Streaming (UVC) while multiplier set on Superspeed
- From: Michael Grzeschik <mgr@xxxxxxxxxxxxxx>
- Re: DWC3-Gadget: Flickering with ISOC Streaming (UVC) while multiplier set on Superspeed
- From: Michael Grzeschik <mgr@xxxxxxxxxxxxxx>
- Re: [PATCH v2 2/5] dt-bindings: phy: qcom,qmp-usb: Add SDX75 USB3 PHY
- From: Rohit Agarwal <quic_rohiagar@xxxxxxxxxxx>
- Re: [PATCH v2 5/5] phy: qcom-qmp-usb: Add Qualcomm SDX75 USB3 PHY support
- From: Rohit Agarwal <quic_rohiagar@xxxxxxxxxxx>
- Re: [PATCH v2 5/5] phy: qcom-qmp-usb: Add Qualcomm SDX75 USB3 PHY support
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- Re: [PATCH v2 2/5] dt-bindings: phy: qcom,qmp-usb: Add SDX75 USB3 PHY
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- Re: [PATCH v2 3/5] dt-bindings: usb: qcom,dwc3: Fix SDX65 clocks
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- Re: [PATCH v2 5/5] phy: qcom-qmp-usb: Add Qualcomm SDX75 USB3 PHY support
- From: Rohit Agarwal <quic_rohiagar@xxxxxxxxxxx>
- Re: [PATCH v2 2/5] dt-bindings: phy: qcom,qmp-usb: Add SDX75 USB3 PHY
- From: Rohit Agarwal <quic_rohiagar@xxxxxxxxxxx>
- Re: [PATCH v2 2/5] dt-bindings: phy: qcom,qmp-usb: Add SDX75 USB3 PHY
- From: Rohit Agarwal <quic_rohiagar@xxxxxxxxxxx>
- Re: [PATCH v2 3/5] dt-bindings: usb: qcom,dwc3: Fix SDX65 clocks
- From: Rohit Agarwal <quic_rohiagar@xxxxxxxxxxx>
- RE: [PATCH v14 1/4] usb: Add support for Intel LJCA device
- From: "Wu, Wentong" <wentong.wu@xxxxxxxxx>
- [PATCH v15 4/4] gpio: update Intel LJCA USB GPIO driver
- From: Wentong Wu <wentong.wu@xxxxxxxxx>
- [PATCH v15 3/4] spi: Add support for Intel LJCA USB SPI driver
- From: Wentong Wu <wentong.wu@xxxxxxxxx>
- [PATCH v15 2/4] i2c: Add support for Intel LJCA USB I2C driver
- From: Wentong Wu <wentong.wu@xxxxxxxxx>
- [PATCH v15 1/4] usb: Add support for Intel LJCA device
- From: Wentong Wu <wentong.wu@xxxxxxxxx>
- [PATCH v15 0/4] Add Intel LJCA device driver
- From: Wentong Wu <wentong.wu@xxxxxxxxx>
- [PATCH net v2] r8152: avoid the driver drops a lot of packets
- From: Hayes Wang <hayeswang@xxxxxxxxxxx>
- Re: usb: dwc3: some USB devices not working after 6.4.8
- From: Thinh Nguyen <Thinh.Nguyen@xxxxxxxxxxxx>
- [Bug 217862] [BUG] Alauda driver causes oops when inserted with card in with transfer buffer is on stack, throws errors if card is inserted afterwards.
- From: bugzilla-daemon@xxxxxxxxxx
- Re: DWC3-Gadget: Flickering with ISOC Streaming (UVC) while multiplier set on Superspeed
- From: Thinh Nguyen <Thinh.Nguyen@xxxxxxxxxxxx>
- Re: DWC3-Gadget: Flickering with ISOC Streaming (UVC) while multiplier set on Superspeed
- From: Thinh Nguyen <Thinh.Nguyen@xxxxxxxxxxxx>
- RE: [PATCH v2 3/5] usb: pd: Add helper macro to get Type C cable speed
- From: "Patel, Utkarsh H" <utkarsh.h.patel@xxxxxxxxx>
- Re: dwc3: unusual handling of setup requests with wLength == 0
- From: Thinh Nguyen <Thinh.Nguyen@xxxxxxxxxxxx>
- Re: [PATCH v2 5/5] phy: qcom-qmp-usb: Add Qualcomm SDX75 USB3 PHY support
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- Re: [PATCH v2 3/5] dt-bindings: usb: qcom,dwc3: Fix SDX65 clocks
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- Re: [PATCH v2 2/5] dt-bindings: phy: qcom,qmp-usb: Add SDX75 USB3 PHY
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- Re: [PATCH 5/5] phy: qcom-qmp-usb: Add Qualcomm SDX75 USB3 PHY support
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- Re: [PATCH v2 3/5] dt-bindings: usb: qcom,dwc3: Fix SDX65 clocks
- From: Rob Herring <robh@xxxxxxxxxx>
- [Bug 217862] [BUG] Alauda driver causes oops when inserted with card in with transfer buffer is on stack, throws errors if card is inserted afterwards.
- From: bugzilla-daemon@xxxxxxxxxx
- [Bug 217862] [BUG] Alauda driver causes oops when inserted with card in with transfer buffer is on stack, throws errors if card is inserted afterwards.
- From: bugzilla-daemon@xxxxxxxxxx
- ucsi debugfs oops (current Linus pre-6.6-rc1)
- From: Dave Hansen <dave.hansen@xxxxxxxxx>
- Re: ucsi debugfs oops (current Linus pre-6.6-rc1)
- From: Mario Limonciello <mario.limonciello@xxxxxxx>
- Re: ucsi debugfs oops (current Linus pre-6.6-rc1)
- From: Dave Hansen <dave.hansen@xxxxxxxxx>
- [Bug 217862] [BUG] Alauda driver causes oops when inserted with card in with transfer buffer is on stack, throws errors if card is inserted afterwards.
- From: bugzilla-daemon@xxxxxxxxxx
- Re: [PATCH 2/5] dt-bindings: phy: Add qcom,sdx75-qmp-usb3-uni schema file
- From: Rob Herring <robh@xxxxxxxxxx>
- [Bug 217862] [BUG] Alauda driver causes oops when inserted with card in with transfer buffer is on stack, throws errors if card is inserted afterwards.
- From: bugzilla-daemon@xxxxxxxxxx
- [Bug 217862] [BUG] Alauda driver causes oops when inserted with card in with transfer buffer is on stack, throws errors if card is inserted afterwards.
- From: bugzilla-daemon@xxxxxxxxxx
- [PATCH v6 3/3] scsi: qla2xxx: Use DEFINE_SHOW_STORE_ATTRIBUTE() helper for debugfs
- From: Xingui Yang <yangxingui@xxxxxxxxxx>
- Re: [PATCH v10 06/11] usb: dwc3: qcom: Refactor IRQ handling in QCOM Glue driver
- From: Krishna Kurapati PSSNV <quic_kriskura@xxxxxxxxxxx>
- [PATCH 2/5] dt-bindings: phy: Add qcom,sdx75-qmp-usb3-uni schema file
- From: Rohit Agarwal <quic_rohiagar@xxxxxxxxxxx>
- [PATCH v2 3/5] dt-bindings: usb: qcom,dwc3: Fix SDX65 clocks
- From: Rohit Agarwal <quic_rohiagar@xxxxxxxxxxx>
- [PATCH 3/5] dt-bindings: usb: dwc3: Add missing SDX65 compatible
- From: Rohit Agarwal <quic_rohiagar@xxxxxxxxxxx>
- [PATCH v6 2/3] scsi: hisi_sas: Use DEFINE_SHOW_STORE_ATTRIBUTE() helper for debugfs
- From: Xingui Yang <yangxingui@xxxxxxxxxx>
- Re: [PATCH v14 1/4] usb: Add support for Intel LJCA device
- From: "gregkh@xxxxxxxxxxxxxxxxxxx" <gregkh@xxxxxxxxxxxxxxxxxxx>
- [PATCH 4/5] dt-bindings: usb: dwc3: Add SDX75 compatible
- From: Rohit Agarwal <quic_rohiagar@xxxxxxxxxxx>
- [PATCH v2 0/5] Add USB Support on Qualcomm's SDX75 Platform
- From: Rohit Agarwal <quic_rohiagar@xxxxxxxxxxx>
- Re: [PATCH 2/5] dt-bindings: phy: Add qcom,sdx75-qmp-usb3-uni schema file
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- Re: [PATCH 3/5] dt-bindings: usb: dwc3: Add missing SDX65 compatible
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- [PATCH] USB: serial: option: add Telit LE910C4-WWX 0x1035 composition
- From: Fabio Porcedda <fabio.porcedda@xxxxxxxxx>
- [PATCH v2 5/5] phy: qcom-qmp-usb: Add Qualcomm SDX75 USB3 PHY support
- From: Rohit Agarwal <quic_rohiagar@xxxxxxxxxxx>
- Re: [PATCH 2/5] dt-bindings: phy: Add qcom,sdx75-qmp-usb3-uni schema file
- From: Rohit Agarwal <quic_rohiagar@xxxxxxxxxxx>
- Re: [PATCH 1/5] dt-bindings: phy: qcom,snps-eusb2-phy: Add compatible for SDX75
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- [Bug 217862] [BUG] Alauda driver causes oops when inserted with card in with transfer buffer is on stack, throws errors if card is inserted afterwards.
- From: bugzilla-daemon@xxxxxxxxxx
- Re: [PATCH v6 3/3] scsi: qla2xxx: Use DEFINE_SHOW_STORE_ATTRIBUTE() helper for debugfs
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
- RE: [PATCH v14 1/4] usb: Add support for Intel LJCA device
- From: "Wu, Wentong" <wentong.wu@xxxxxxxxx>
- Re: [PATCH 2/5] dt-bindings: phy: Add qcom,sdx75-qmp-usb3-uni schema file
- From: Rohit Agarwal <quic_rohiagar@xxxxxxxxxxx>
- Re: [PATCH 4/5] dt-bindings: usb: dwc3: Add SDX75 compatible
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- [PATCH 5/5] phy: qcom-qmp-usb: Add Qualcomm SDX75 USB3 PHY support
- From: Rohit Agarwal <quic_rohiagar@xxxxxxxxxxx>
- Re: [PATCH net] r8152: avoid the driver drops a lot of packets
- From: Paolo Abeni <pabeni@xxxxxxxxxx>
- [PATCH v2 2/5] dt-bindings: phy: qcom,qmp-usb: Add SDX75 USB3 PHY
- From: Rohit Agarwal <quic_rohiagar@xxxxxxxxxxx>
- [PATCH 0/5] Add USB Support on Qualcomm's SDX75 Platform
- From: Rohit Agarwal <quic_rohiagar@xxxxxxxxxxx>
- Re: [RFC PATCH v1 01/12] Revert "drm/sysfs: Link DRM connectors to corresponding Type-C connectors"
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- Re: [RFC PATCH v1 01/12] Revert "drm/sysfs: Link DRM connectors to corresponding Type-C connectors"
- From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
- [PATCH v6 0/3] Add helper macro DEFINE_SHOW_STORE_ATTRIBUTE() at seq_file.c
- From: Xingui Yang <yangxingui@xxxxxxxxxx>
- RE: [PATCH net] r8152: avoid the driver drops a lot of packets
- From: Hayes Wang <hayeswang@xxxxxxxxxxx>
- Re: [PATCH 2/5] dt-bindings: phy: Add qcom,sdx75-qmp-usb3-uni schema file
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- Re: [PATCH v2 0/2] Fix tps65217-charger vs vbus irq conflict
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH v2 4/5] dt-bindings: usb: dwc3: Add SDX75 compatible
- From: Rohit Agarwal <quic_rohiagar@xxxxxxxxxxx>
- [PATCH 1/5] dt-bindings: phy: qcom,snps-eusb2-phy: Add compatible for SDX75
- From: Rohit Agarwal <quic_rohiagar@xxxxxxxxxxx>
- [PATCH v6 1/3] seq_file: Add helper macro to define attribute for rw file
- From: Xingui Yang <yangxingui@xxxxxxxxxx>
- Re: [PATCH 3/5] dt-bindings: usb: dwc3: Add missing SDX65 compatible
- From: Rohit Agarwal <quic_rohiagar@xxxxxxxxxxx>
- RE: [PATCH net] r8152: avoid the driver drops a lot of packets
- From: Hayes Wang <hayeswang@xxxxxxxxxxx>
- Re: [PATCH 5/5] phy: qcom-qmp-usb: Add Qualcomm SDX75 USB3 PHY support
- From: Rohit Agarwal <quic_rohiagar@xxxxxxxxxxx>
- [PATCH v2 1/5] dt-bindings: phy: qcom,snps-eusb2-phy: Add compatible for SDX75
- From: Rohit Agarwal <quic_rohiagar@xxxxxxxxxxx>
- Re: [PATCH v14 1/4] usb: Add support for Intel LJCA device
- From: Oliver Neukum <oneukum@xxxxxxxx>
- RE: [PATCH v14 1/4] usb: Add support for Intel LJCA device
- From: "Wu, Wentong" <wentong.wu@xxxxxxxxx>
- Re: [PATCH net] r8152: avoid the driver drops a lot of packets
- From: Paolo Abeni <pabeni@xxxxxxxxxx>
- Re: [PATCH 5/5] phy: qcom-qmp-usb: Add Qualcomm SDX75 USB3 PHY support
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- Re: [PATCH] usb: hcd: xhci: Add set command timer delay API
- From: Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx>
- Re: [PATCH 3/5] dt-bindings: usb: dwc3: Add missing SDX65 compatible
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- Re: [PATCH 1/2] usb: gadget: u_ether: Do not make UDC parent of the net device
- From: Ondřej Jirman <megi@xxxxxx>
- [Bug 217862] [BUG] Alauda driver causes oops when inserted with card in with transfer buffer is on stack, throws errors if card is inserted afterwards.
- From: bugzilla-daemon@xxxxxxxxxx
- Re: [f2fs-dev] [PATCH v2 00/89] fs: new accessors for inode->i_ctime
- From: patchwork-bot+f2fs@xxxxxxxxxx
- Re: [RFC PATCH v1 00/12] drm,usb/typec: uABI for USB-C DisplayPort connectors
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- Re: [RFC PATCH v1 07/12] soc: qcom: pmic_glink_altmode: report that this is a Type-C connector
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- Re: [RFC PATCH v1 00/12] drm,usb/typec: uABI for USB-C DisplayPort connectors
- From: Bjorn Andersson <andersson@xxxxxxxxxx>
- Re: [RFC PATCH v1 07/12] soc: qcom: pmic_glink_altmode: report that this is a Type-C connector
- From: Bjorn Andersson <andersson@xxxxxxxxxx>
- Re: [RFC PATCH v1 06/12] soc: qcom: pmic_glink_altmode: fix DRM connector type
- From: Bjorn Andersson <andersson@xxxxxxxxxx>
- Re: [PATCH 1/5] usb: dwc3: reference clock period configuration
- From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH] usb: gadget: uvc: Move usb_ep_disable() to uvcg_video_enable()
- From: Michael Grzeschik <mgr@xxxxxxxxxxxxxx>
- Re: [PATCH v14 1/4] usb: Add support for Intel LJCA device
- From: Oliver Neukum <oneukum@xxxxxxxx>
- RE: [PATCH v14 1/4] usb: Add support for Intel LJCA device
- From: "Wu, Wentong" <wentong.wu@xxxxxxxxx>
- Re: [PATCH v5 3/3] scsi: qla2xxx: Use DEFINE_SHOW_STORE_ATTRIBUTE helper for debugfs
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
- Re: [PATCH 1/2] usb: gadget: u_ether: Do not make UDC parent of the net device
- From: Ondřej Jirman <megi@xxxxxx>
- Re: [PATCH v5 3/3] scsi: qla2xxx: Use DEFINE_SHOW_STORE_ATTRIBUTE helper for debugfs
- From: yangxingui <yangxingui@xxxxxxxxxx>
- [PATCH net] r8152: avoid the driver drops a lot of packets
- From: Hayes Wang <hayeswang@xxxxxxxxxxx>
- Re: [PATCH v5 3/3] scsi: qla2xxx: Use DEFINE_SHOW_STORE_ATTRIBUTE helper for debugfs
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
- Re: [PATCH v5 2/3] scsi: hisi_sas: Use DEFINE_SHOW_STORE_ATTRIBUTE helper for debugfs
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
- [PATCH] usb: gadget: u_serial: Add null pointer check in gs_close
- From: "Jiazi.Li" <jqqlijiazi@xxxxxxxxx>
- Re: [PATCH v5 1/3] seq_file: Add helper macro to define attribute for rw file
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
- Re: [PATCH v14 1/4] usb: Add support for Intel LJCA device
- From: Oliver Neukum <oneukum@xxxxxxxx>
- Re: [PATCH] usb: hcd: xhci: Add set command timer delay API
- From: Hardik Gajjar <hgajjar@xxxxxxxxxxxxxx>
- Re: USB issue on a TB4 controller?
- From: Christian Schaubschläger <christian.schaubschlaeger@xxxxxx>
- [PATCH v5 1/3] seq_file: Add helper macro to define attribute for rw file
- From: Xingui Yang <yangxingui@xxxxxxxxxx>
- [PATCH v5 3/3] scsi: qla2xxx: Use DEFINE_SHOW_STORE_ATTRIBUTE helper for debugfs
- From: Xingui Yang <yangxingui@xxxxxxxxxx>
- [PATCH v5 2/3] scsi: hisi_sas: Use DEFINE_SHOW_STORE_ATTRIBUTE helper for debugfs
- From: Xingui Yang <yangxingui@xxxxxxxxxx>
- [PATCH v5 0/3] Add helper macro DEFINE_SHOW_STORE_ATTRIBUTE at seq_file.c
- From: Xingui Yang <yangxingui@xxxxxxxxxx>
- Re: [PATCH v2 1/5] usb: typec: tcpci_rt1711h: Make similar OF and ID table
- From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
- [syzbot] Monthly usb report (Sep 2023)
- From: syzbot <syzbot+listd3a4aa4b7f78fcbb5735@xxxxxxxxxxxxxxxxxxxxxxxxx>
- RE: [PATCH v14 0/4] Add Intel LJCA device driver
- From: "Wu, Wentong" <wentong.wu@xxxxxxxxx>
- RE: [PATCH v14 0/4] Add Intel LJCA device driver
- From: "Wu, Wentong" <wentong.wu@xxxxxxxxx>
- RE: [PATCH v14 1/4] usb: Add support for Intel LJCA device
- From: "Wu, Wentong" <wentong.wu@xxxxxxxxx>
- Re: [PATCH v14 1/4] usb: Add support for Intel LJCA device
- From: Hans de Goede <hdegoede@xxxxxxxxxx>
- Re: [PATCH v14 0/4] Add Intel LJCA device driver
- From: Hans de Goede <hdegoede@xxxxxxxxxx>
- Re: [PATCH v14 0/4] Add Intel LJCA device driver
- From: Bartosz Golaszewski <brgl@xxxxxxxx>
- Re: [PATCH v3 2/2] dt-bindings: usb: Add Realtek DHC RTD SoC Type-C
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- [PATCH 5/5] usb: dwc3: core: add gfladj_refclk_lpm_sel quirk
- From: Tomasz Rostanski <tomasz.rostanski@xxxxxxxxx>
- [PATCH 4/5] usb: dwc3: Program GFLADJ
- From: Tomasz Rostanski <tomasz.rostanski@xxxxxxxxx>
- [PATCH 3/5] usb: dwc3: Calculate REFCLKPER based on reference clock
- From: Tomasz Rostanski <tomasz.rostanski@xxxxxxxxx>
- [PATCH 2/5] usb: dwc3: Get clocks individually
- From: Tomasz Rostanski <tomasz.rostanski@xxxxxxxxx>
- [PATCH 1/5] usb: dwc3: reference clock period configuration
- From: Tomasz Rostanski <tomasz.rostanski@xxxxxxxxx>
- Re: [PATCH v4 0/5] Introduce a new helper macro DEFINE_SHOW_STORE_ATTRIBUTE at seq_file.c
- From: yangxingui <yangxingui@xxxxxxxxxx>
- Re: [PATCH v2 3/5] usb: pd: Add helper macro to get Type C cable speed
- From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
- Re: [PATCH v2 3/5] usb: pd: Add helper macro to get Type C cable speed
- From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
- Re: [PATCH v2 2/5] usb: typec: Add Active or Passive cable defination to cable discover mode VDO
- From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
- Re: [PATCH v5] usb: typec: qcom: Update the logic of regulator enable and disable
- From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
- [PATCH V4 4/4] arm64: dts: qcom: ipq5018: Enable USB
- From: Nitheesh Sekar <quic_nsekar@xxxxxxxxxxx>
- [PATCH V4 3/4] arm64: dts: qcom: ipq5018: Add USB related nodes
- From: Nitheesh Sekar <quic_nsekar@xxxxxxxxxxx>
- [PATCH V4 2/4] phy: qcom-m31: Add compatible, phy init sequence for IPQ5018
- From: Nitheesh Sekar <quic_nsekar@xxxxxxxxxxx>
- [PATCH V4 1/4] dt-bindings: phy: qcom,m31: Add IPQ5018 compatible
- From: Nitheesh Sekar <quic_nsekar@xxxxxxxxxxx>
- [PATCH V4 0/4] Enable IPQ5018 USB2 support
- From: Nitheesh Sekar <quic_nsekar@xxxxxxxxxxx>
- [PATCH v14 4/4] gpio: update Intel LJCA USB GPIO driver
- From: Wentong Wu <wentong.wu@xxxxxxxxx>
- [PATCH v14 3/4] spi: Add support for Intel LJCA USB SPI driver
- From: Wentong Wu <wentong.wu@xxxxxxxxx>
- [PATCH v14 2/4] i2c: Add support for Intel LJCA USB I2C driver
- From: Wentong Wu <wentong.wu@xxxxxxxxx>
- [PATCH v14 1/4] usb: Add support for Intel LJCA device
- From: Wentong Wu <wentong.wu@xxxxxxxxx>
- [PATCH v14 0/4] Add Intel LJCA device driver
- From: Wentong Wu <wentong.wu@xxxxxxxxx>
- [PATCH RESEND v13 4/4] gpio: update Intel LJCA USB GPIO driver
- From: Wentong Wu <wentong.wu@xxxxxxxxx>
- [PATCH RESEND v13 2/4] i2c: Add support for Intel LJCA USB I2C driver
- From: Wentong Wu <wentong.wu@xxxxxxxxx>
- [PATCH RESEND v13 3/4] spi: Add support for Intel LJCA USB SPI driver
- From: Wentong Wu <wentong.wu@xxxxxxxxx>
- [PATCH RESEND v13 1/4] usb: Add support for Intel LJCA device
- From: Wentong Wu <wentong.wu@xxxxxxxxx>
- [PATCH RESEND v13 0/4] Add Intel LJCA device driver
- From: Wentong Wu <wentong.wu@xxxxxxxxx>
- Re: [PATCH v13 2/4] i2c: Add support for Intel LJCA USB I2C driver
- From: kernel test robot <lkp@xxxxxxxxx>
- [PATCH v3 2/2] dt-bindings: usb: Add Realtek DHC RTD SoC Type-C
- From: Stanley Chang <stanley_chang@xxxxxxxxxxx>
- [PATCH v3 1/2] extcon: add Realtek DHC RTD SoC Type-C driver
- From: Stanley Chang <stanley_chang@xxxxxxxxxxx>
- Re: [PATCH V3 2/4] phy: qcom-m31: Add compatible, phy init sequence for IPQ5018
- From: Nitheesh Sekar <quic_nsekar@xxxxxxxxxxx>
- [PATCH v13 4/4] gpio: update Intel LJCA USB GPIO driver
- From: Wentong Wu <wentong.wu@xxxxxxxxx>
- [PATCH v13 3/4] spi: Add support for Intel LJCA USB SPI driver
- From: Wentong Wu <wentong.wu@xxxxxxxxx>
- [PATCH v13 2/4] i2c: Add support for Intel LJCA USB I2C driver
- From: Wentong Wu <wentong.wu@xxxxxxxxx>
- [PATCH v13 1/4] usb: Add support for Intel LJCA device
- From: Wentong Wu <wentong.wu@xxxxxxxxx>
- [PATCH v13 0/4] Add Intel LJCA device driver
- From: Wentong Wu <wentong.wu@xxxxxxxxx>
- Re: DWC3-Gadget: Flickering with ISOC Streaming (UVC) while multiplier set on Superspeed
- From: Michael Grzeschik <mgr@xxxxxxxxxxxxxx>
- Re: usb: dwc3: some USB devices not working after 6.4.8
- From: Bagas Sanjaya <bagasdotme@xxxxxxxxx>
- Re: DWC3-Gadget: Flickering with ISOC Streaming (UVC) while multiplier set on Superspeed
- From: Michael Grzeschik <mgr@xxxxxxxxxxxxxx>
- [RFC PATCH v1 10/12] usb: typec: qcom: implement proper error path in probe()
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- [RFC PATCH v1 08/12] usb: typec: support generating Type-C port names for userspace
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- [RFC PATCH v1 09/12] usb: typec: tcpm: support generating Type-C port names for userspace
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- [RFC PATCH v1 11/12] usb: typec: qcom: extract DRM bridge functionality to separate file
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- [RFC PATCH v1 05/12] drm/bridge: remove conditionals around devicetree pointers
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- [RFC PATCH v1 12/12] usb: typec: qcom: define the bridge's path
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- [RFC PATCH v1 06/12] soc: qcom: pmic_glink_altmode: fix DRM connector type
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- [RFC PATCH v1 07/12] soc: qcom: pmic_glink_altmode: report that this is a Type-C connector
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- [RFC PATCH v1 04/12] drm/bridge-connector: set the PATH property for the connector
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- [RFC PATCH v1 03/12] drm/connector: extend PATH property to covert Type-C case
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- [RFC PATCH v1 02/12] drm/sysfs: link DRM connector device to the connector's fw nodes
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- [RFC PATCH v1 01/12] Revert "drm/sysfs: Link DRM connectors to corresponding Type-C connectors"
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- [RFC PATCH v1 00/12] drm,usb/typec: uABI for USB-C DisplayPort connectors
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- [PATCH v7 3/3] drm/bridge_connector: implement oob_hotplug_event
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- [PATCH v7 2/3] drm/bridge_connector: stop filtering events in drm_bridge_connector_hpd_cb()
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- [PATCH v7 1/3] drm: Add HPD state to drm_connector_oob_hotplug_event()
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- [PATCH v7 0/3] drm/bridge_connector: implement OOB HPD handling
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- Re: [PATCH v4 0/3] drm: simplify support for transparent DRM bridges
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- [Bug 217862] [BUG] Alauda driver causes oops when inserted with card in with transfer buffer is on stack, throws errors if card is inserted afterwards.
- From: bugzilla-daemon@xxxxxxxxxx
- Re: [PATCH v4] hwmon: add POWER-Z driver
- From: Thomas Weißschuh <linux@xxxxxxxxxxxxxx>
- Re: [PATCH v4] hwmon: add POWER-Z driver
- From: Douglas Gilbert <dgilbert@xxxxxxxxxxxx>
- RE: [PATCH v12 0/4] Add Intel LJCA device driver
- From: "Wu, Wentong" <wentong.wu@xxxxxxxxx>
- Re: [PATCH v4] hwmon: add POWER-Z driver
- From: Guenter Roeck <linux@xxxxxxxxxxxx>
- Re:Re: [PATCH v3] USB: Extend usb_device_speed with new value USB_SPEED_SUPER_PLUS_BY2
- From: "Dingyan Li" <18500469033@xxxxxxx>
- Re: [PATCH v4] hwmon: add POWER-Z driver
- From: Douglas Gilbert <dgilbert@xxxxxxxxxxxx>
- [Bug 217862] [BUG] Alauda driver causes oops when inserted with card in with transfer buffer is on stack, throws errors if card is inserted afterwards.
- From: bugzilla-daemon@xxxxxxxxxx
- Re: [PATCH v4] hwmon: add POWER-Z driver
- From: Guenter Roeck <linux@xxxxxxxxxxxx>
- Re: [PATCH v4] hwmon: add POWER-Z driver
- From: Thomas Weißschuh <linux@xxxxxxxxxxxxxx>
- Re: [PATCH v12 0/4] Add Intel LJCA device driver
- From: Hans de Goede <hdegoede@xxxxxxxxxx>
- Re: [PATCH v12 2/4] i2c: Add support for Intel LJCA USB I2C driver
- From: Andi Shyti <andi.shyti@xxxxxxxxxx>
- Re: [PATCH v12 4/4] gpio: update Intel LJCA USB GPIO driver
- From: Andi Shyti <andi.shyti@xxxxxxxxxx>
- RE: [PATCH v12 4/4] gpio: update Intel LJCA USB GPIO driver
- From: "Wu, Wentong" <wentong.wu@xxxxxxxxx>
- RE: [PATCH v12 1/4] usb: Add support for Intel LJCA device
- From: "Wu, Wentong" <wentong.wu@xxxxxxxxx>
- RE: [PATCH v12 3/4] spi: Add support for Intel LJCA USB SPI driver
- From: "Wu, Wentong" <wentong.wu@xxxxxxxxx>
- RE: [PATCH v12 0/4] Add Intel LJCA device driver
- From: "Wu, Wentong" <wentong.wu@xxxxxxxxx>
- Re: [PATCH v4] hwmon: add POWER-Z driver
- From: Christophe JAILLET <christophe.jaillet@xxxxxxxxxx>
- Re: dwc3: unusual handling of setup requests with wLength == 0
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v12 0/4] Add Intel LJCA device driver
- From: Hans de Goede <hdegoede@xxxxxxxxxx>
- Re: [PATCH v4] hwmon: add POWER-Z driver
- From: Thomas Weißschuh <linux@xxxxxxxxxxxxxx>
- Re: [PATCH v4] hwmon: add POWER-Z driver
- From: Guenter Roeck <linux@xxxxxxxxxxxx>
- [usb:rndis-removal] BUILD SUCCESS 02033ac124091281dc09ab7d1ddf0fb69ef24f26
- From: kernel test robot <lkp@xxxxxxxxx>
- [PATCH v4] hwmon: add POWER-Z driver
- From: Thomas Weißschuh <linux@xxxxxxxxxxxxxx>
- Re: [PATCH v3] hwmon: add POWER-Z driver
- From: Thomas Weißschuh <linux@xxxxxxxxxxxxxx>
- [Bug 217862] [BUG] Alauda driver causes oops when inserted with card in with transfer buffer is on stack, throws errors if card is inserted afterwards.
- From: bugzilla-daemon@xxxxxxxxxx
- Re: alauda_check_media() doubts
- From: Pawlicker <jake@xxxxxxxxxxxxx>
- [Bug 217862] [BUG] Alauda driver causes oops when inserted with card in with transfer buffer is on stack, throws errors if card is inserted afterwards.
- From: bugzilla-daemon@xxxxxxxxxx
- [Bug 217862] New: [BUG] Alauda driver causes oops when inserted with card in with transfer buffer is on stack, throws errors if card is inserted afterwards.
- From: bugzilla-daemon@xxxxxxxxxx
- Re: [PATCH v3] hwmon: add POWER-Z driver
- From: Guenter Roeck <linux@xxxxxxxxxxxx>
- Re: [PATCH V3 2/4] phy: qcom-m31: Add compatible, phy init sequence for IPQ5018
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- Re: [PATCH v11 06/13] usb: dwc3: core: Refactor PHY logic to support Multiport Controller
- From: Krishna Kurapati PSSNV <quic_kriskura@xxxxxxxxxxx>
- [PATCH v3] hwmon: add POWER-Z driver
- From: Thomas Weißschuh <linux@xxxxxxxxxxxxxx>
- Re: [PATCH v3] USB: Extend usb_device_speed with new value USB_SPEED_SUPER_PLUS_BY2
- From: Thinh Nguyen <Thinh.Nguyen@xxxxxxxxxxxx>
- Re: [PATCH v3] USB: Extend usb_device_speed with new value USB_SPEED_SUPER_PLUS_BY2
- From: Thinh Nguyen <Thinh.Nguyen@xxxxxxxxxxxx>
- Re: [PATCH V3 4/4] arm64: dts: qcom: ipq5018: Enable USB
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- Re: dwc3: unusual handling of setup requests with wLength == 0
- From: Thinh Nguyen <Thinh.Nguyen@xxxxxxxxxxxx>
- Re: dwc3: unusual handling of setup requests with wLength == 0
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: [GIT PULL] USB / Thunderbolt / PHY driver updates for 6.6-rc1
- From: pr-tracker-bot@xxxxxxxxxx
- [PATCH v3] USB: Extend usb_device_speed with new value USB_SPEED_SUPER_PLUS_BY2
- From: Dingyan Li <18500469033@xxxxxxx>
- [GIT PULL] USB / Thunderbolt / PHY driver updates for 6.6-rc1
- From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v12 4/4] gpio: update Intel LJCA USB GPIO driver
- From: Andi Shyti <andi.shyti@xxxxxxxxxxxxxxx>
- Re: [PATCH v12 3/4] spi: Add support for Intel LJCA USB SPI driver
- From: Andi Shyti <andi.shyti@xxxxxxxxxxxxxxx>
- Re: [PATCH v12 1/4] usb: Add support for Intel LJCA device
- From: Andi Shyti <andi.shyti@xxxxxxxxxxxxxxx>
- [Bug 217670] dwc3: regression in USB DWC3 driver in kernel 5.15 branch
- From: bugzilla-daemon@xxxxxxxxxx
- Re: [Bug 217670] dwc3: regression in USB DWC3 driver in kernel 5.15 branch
- From: Greg KH <greg@xxxxxxxxx>
- [Bug 217670] dwc3: regression in USB DWC3 driver in kernel 5.15 branch
- From: bugzilla-daemon@xxxxxxxxxx
- [Bug 217670] dwc3: regression in USB DWC3 driver in kernel 5.15 branch
- From: bugzilla-daemon@xxxxxxxxxx
- [Bug 217670] dwc3: regression in USB DWC3 driver in kernel 5.15 branch
- From: bugzilla-daemon@xxxxxxxxxx
- [Bug 217670] dwc3: regression in USB DWC3 driver in kernel 5.15 branch
- From: bugzilla-daemon@xxxxxxxxxx
- [Bug 217670] dwc3: regression in USB DWC3 driver in kernel 5.15 branch
- From: bugzilla-daemon@xxxxxxxxxx
- [Bug 217670] dwc3: regression in USB DWC3 driver in kernel 5.15 branch
- From: bugzilla-daemon@xxxxxxxxxx
- [Bug 217670] dwc3: regression in USB DWC3 driver in kernel 5.15 branch
- From: bugzilla-daemon@xxxxxxxxxx
- [Bug 217670] dwc3: regression in USB DWC3 driver in kernel 5.15 branch
- From: bugzilla-daemon@xxxxxxxxxx
- [Bug 217670] dwc3: regression in USB DWC3 driver in kernel 5.15 branch
- From: bugzilla-daemon@xxxxxxxxxx
- [Bug 217670] dwc3: regression in USB DWC3 driver in kernel 5.15 branch
- From: bugzilla-daemon@xxxxxxxxxx
- [Bug 217670] dwc3: regression in USB DWC3 driver in kernel 5.15 branch
- From: bugzilla-daemon@xxxxxxxxxx
- [Bug 217670] dwc3: regression in USB DWC3 driver in kernel 5.15 branch
- From: bugzilla-daemon@xxxxxxxxxx
- Re: [PATCH v2 00/10] Multi-segment Event Ring support for XHCI
- From: Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx>
- [PATCH] USB: serial: option: add Fibocom to DELL custom modem FM101R-GL
- From: Puliang Lu <530194200.fh@xxxxxxxxx>
- [PATCH V3 3/4] arm64: dts: qcom: ipq5018: Add USB related nodes
- From: Nitheesh Sekar <quic_nsekar@xxxxxxxxxxx>
- [PATCH V3 4/4] arm64: dts: qcom: ipq5018: Enable USB
- From: Nitheesh Sekar <quic_nsekar@xxxxxxxxxxx>
- [PATCH V3 2/4] phy: qcom-m31: Add compatible, phy init sequence for IPQ5018
- From: Nitheesh Sekar <quic_nsekar@xxxxxxxxxxx>
- [PATCH V3 1/4] dt-bindings: phy: qcom,m31: Add IPQ5018 compatible
- From: Nitheesh Sekar <quic_nsekar@xxxxxxxxxxx>
- [PATCH V3 0/4] Enable IPQ5018 USB2 support
- From: Nitheesh Sekar <quic_nsekar@xxxxxxxxxxx>
- [Bug 217670] dwc3: regression in USB DWC3 driver in kernel 5.15 branch
- From: bugzilla-daemon@xxxxxxxxxx
- Re: [PATCH v4 0/5] Introduce a new helper macro DEFINE_SHOW_STORE_ATTRIBUTE at seq_file.c
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
- Re: [PATCH v4 0/5] Introduce a new helper macro DEFINE_SHOW_STORE_ATTRIBUTE at seq_file.c
- From: yangxingui <yangxingui@xxxxxxxxxx>
- [PATCH V3] usb: gadget: udc-xilinx: replace memcpy with memcpy_toio
- From: Piyush Mehta <piyush.mehta@xxxxxxx>
- [PATCH v12 4/4] gpio: update Intel LJCA USB GPIO driver
- From: Wentong Wu <wentong.wu@xxxxxxxxx>
- [PATCH v12 3/4] spi: Add support for Intel LJCA USB SPI driver
- From: Wentong Wu <wentong.wu@xxxxxxxxx>
- [PATCH v12 2/4] i2c: Add support for Intel LJCA USB I2C driver
- From: Wentong Wu <wentong.wu@xxxxxxxxx>
- [PATCH v12 1/4] usb: Add support for Intel LJCA device
- From: Wentong Wu <wentong.wu@xxxxxxxxx>
- [PATCH v12 0/4] Add Intel LJCA device driver
- From: Wentong Wu <wentong.wu@xxxxxxxxx>
- Re: DWC3-Gadget: Flickering with ISOC Streaming (UVC) while multiplier set on Superspeed
- From: Thinh Nguyen <Thinh.Nguyen@xxxxxxxxxxxx>
- Re: dwc3: unusual handling of setup requests with wLength == 0
- From: Thinh Nguyen <Thinh.Nguyen@xxxxxxxxxxxx>
- Re: [PATCH v11 06/13] usb: dwc3: core: Refactor PHY logic to support Multiport Controller
- From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
- [PATCH v2] usb: host: xhci: Avoid XHCI resume delay if SSUSB device is not present
- From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
- DWC3-Gadget: Flickering with ISOC Streaming (UVC) while multiplier set on Superspeed
- From: Michael Grzeschik <mgr@xxxxxxxxxxxxxx>
- Re: [PATCH v5 12/32] sound: usb: Export USB SND APIs for modules
- From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
- Re: [PATCH v5 10/32] ASoC: qcom: Add USB backend ASoC driver for Q6
- From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
- Re: [PATCH v5 23/32] ASoC: dt-bindings: Add Q6USB backend
- From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
- Re: [PATCH v5 13/32] dt-bindings: usb: dwc3: Add snps,num-hc-interrupters definition
- From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
- Re: [PATCH v4 0/5] Introduce a new helper macro DEFINE_SHOW_STORE_ATTRIBUTE at seq_file.c
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
- Re: [PATCH v5 24/32] ASoC: dt-bindings: Update example for enabling USB offload on SM8250
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH v5 23/32] ASoC: dt-bindings: Add Q6USB backend
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH v5 13/32] dt-bindings: usb: dwc3: Add snps,num-hc-interrupters definition
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH v5 14/32] dt-bindings: usb: xhci: Add num-hc-interrupters definition
- From: Rob Herring <robh@xxxxxxxxxx>
- RE: [PATCH v2 1/5] usb: typec: tcpci_rt1711h: Make similar OF and ID table
- From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
- Re: [PATCH v2 0/5] Match data improvements for rt1711h driver
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
- Re: [PATCH v2 5/5] usb: typec: tcpci_rt1711h: Drop CONFIG_OF ifdeffery
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
- Re: [PATCH v2 1/5] usb: typec: tcpci_rt1711h: Make similar OF and ID table
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
- [PATCH v2 5/5] usb: typec: tcpci_rt1711h: Drop CONFIG_OF ifdeffery
- From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
- [PATCH v2 3/5] usb: typec: tcpci_rt1711h: Add rxdz_sel variable to struct rt1711h_chip_info
- From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
- [PATCH v2 1/5] usb: typec: tcpci_rt1711h: Make similar OF and ID table
- From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
- [PATCH v2 4/5] usb: typec: tcpci_rt1711h: Add enable_pd30_extended_message variable to struct rt1711h_chip_info
- From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
- [PATCH v2 2/5] usb: typec: tcpci_rt1711h: Convert enum->pointer for data in the match tables
- From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
- [PATCH v2 0/5] Match data improvements for rt1711h driver
- From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
- Re: usb-storage: how to extend quirks flags to 64bit?
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: dwc3: unusual handling of setup requests with wLength == 0
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- RE: [PATCH v2 4/5] platform/chrome: cros_ec_typec: Add Displayport Alternatemode 2.1 Support
- From: "Patel, Utkarsh H" <utkarsh.h.patel@xxxxxxxxx>
- Re: [RESEND] USB PD broken on Lenovo P15gen2
- From: Nikolay Borisov <nik.borisov@xxxxxxxx>
- Re: [RESEND] USB PD broken on Lenovo P15gen2
- From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
- Re: [PATCH 2/9] phy: qcom: uniphy: Rename ipq4019 USB phy driver to UNIPHY driver
- From: Praveenkumar I <quic_ipkumar@xxxxxxxxxxx>
- Re: [PATCH 1/9] dt-bindings: phy: qcom,uniphy: Rename ipq4019 usb PHY to UNIPHY
- From: Praveenkumar I <quic_ipkumar@xxxxxxxxxxx>
- RE: [PATCH v11 1/4] usb: Add support for Intel LJCA device
- From: "Wu, Wentong" <wentong.wu@xxxxxxxxx>
- Re: [PATCH 1/9] dt-bindings: phy: qcom,uniphy: Rename ipq4019 usb PHY to UNIPHY
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- Re: [PATCH 1/9] dt-bindings: phy: qcom,uniphy: Rename ipq4019 usb PHY to UNIPHY
- From: Praveenkumar I <quic_ipkumar@xxxxxxxxxxx>
- Re: [RFC PATCH 0/2] usb: Link USB devices with their USB Type-C partner counterparts
- From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
- Re: [PATCH 8/9] phy: qcom: uniphy: Add ipq5332 USB UNIPHY support
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- Re: [PATCH 1/9] dt-bindings: phy: qcom,uniphy: Rename ipq4019 usb PHY to UNIPHY
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- Re: [PATCH 0/9] Enable USB3 for IPQ5332
- From: Praveenkumar I <quic_ipkumar@xxxxxxxxxxx>
- Re: [PATCH 0/9] Enable USB3 for IPQ5332
- From: Praveenkumar I <quic_ipkumar@xxxxxxxxxxx>
- Re: [PATCH 3/9] phy: qcom: uniphy: Update UNIPHY driver to be a common driver
- From: Praveenkumar I <quic_ipkumar@xxxxxxxxxxx>
- Re: [PATCH 1/9] dt-bindings: phy: qcom,uniphy: Rename ipq4019 usb PHY to UNIPHY
- From: Praveenkumar I <quic_ipkumar@xxxxxxxxxxx>
- Re: Possible cut'n'paste error in linux-6.5/drivers/thunderbolt/tmu.c
- From: "mika.westerberg@xxxxxxxxxxxxxxx" <mika.westerberg@xxxxxxxxxxxxxxx>
- Re: [PATCH v11 1/4] usb: Add support for Intel LJCA device
- From: Oliver Neukum <oneukum@xxxxxxxx>
- Possible cut'n'paste error in linux-6.5/drivers/thunderbolt/tmu.c
- From: David Binderman <dcb314@xxxxxxxxxxx>
- [Bug 217670] dwc3: regression in USB DWC3 driver in kernel 5.15 branch
- From: bugzilla-daemon@xxxxxxxxxx
- Re: [Bug 217670] dwc3: regression in USB DWC3 driver in kernel 5.15 branch
- From: Greg KH <greg@xxxxxxxxx>
- [PATCH v5] usb: typec: qcom: Update the logic of regulator enable and disable
- From: Hui Liu via B4 Relay <devnull+quic_huliu.quicinc.com@xxxxxxxxxx>
- [Bug 217670] dwc3: regression in USB DWC3 driver in kernel 5.15 branch
- From: bugzilla-daemon@xxxxxxxxxx
- Re: 6.1.30: thunderbolt: Clear registers properly when auto clear isn't in use cause call trace after resume
- From: "Linux regression tracking #update (Thorsten Leemhuis)" <regressions@xxxxxxxxxxxxx>
- [Bug 217670] dwc3: regression in USB DWC3 driver in kernel 5.15 branch
- From: bugzilla-daemon@xxxxxxxxxx
- [Bug 217670] dwc3: regression in USB DWC3 driver in kernel 5.15 branch
- From: bugzilla-daemon@xxxxxxxxxx
- Re: [PATCH v4 2/3] dt-bindings: usb: snps,dwc3: Add runtime-suspend-on-usb-suspend property
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- [usb:usb-testing] BUILD SUCCESS 895ed7eb263d7ce2d2592fdd3e211464a556084a
- From: kernel test robot <lkp@xxxxxxxxx>
- Re: [PATCH V2 3/4] arm64: dts: qcom: ipq5018: Add USB related nodes
- From: Nitheesh Sekar <quic_nsekar@xxxxxxxxxxx>
- [PATCH V3] dt-bindings: usb: dwc3: Add IPQ5018 compatible
- From: Nitheesh Sekar <quic_nsekar@xxxxxxxxxxx>
- Re: [PATCH v4 2/3] dt-bindings: usb: snps,dwc3: Add runtime-suspend-on-usb-suspend property
- From: Thinh Nguyen <Thinh.Nguyen@xxxxxxxxxxxx>
- Re: [PATCH 5/5] arm64: dts: qcom: ipq5018: Enable USB
- From: Nitheesh Sekar <quic_nsekar@xxxxxxxxxxx>
- Re: [PATCH 4/5] arm64: dts: qcom: ipq5018: Add USB related nodes
- From: Nitheesh Sekar <quic_nsekar@xxxxxxxxxxx>
- Re: dwc3: unusual handling of setup requests with wLength == 0
- From: Thinh Nguyen <Thinh.Nguyen@xxxxxxxxxxxx>
- Re: [PATCH v11 2/4] i2c: Add support for Intel LJCA USB I2C driver
- From: Wolfram Sang <wsa@xxxxxxxxxx>
- [PATCH v2 4/5] platform/chrome: cros_ec_typec: Add Displayport Alternatemode 2.1 Support
- From: Utkarsh Patel <utkarsh.h.patel@xxxxxxxxx>
- [PATCH v2 3/5] usb: pd: Add helper macro to get Type C cable speed
- From: Utkarsh Patel <utkarsh.h.patel@xxxxxxxxx>
- [PATCH v2 5/5] usb: typec: intel_pmc_mux: Configure Displayport Alternate mode 2.1
- From: Utkarsh Patel <utkarsh.h.patel@xxxxxxxxx>
- [PATCH v2 2/5] usb: typec: Add Active or Passive cable defination to cable discover mode VDO
- From: Utkarsh Patel <utkarsh.h.patel@xxxxxxxxx>
- [PATCH v2 1/5] usb: typec: Add Displayport Alternate Mode 2.1 Support
- From: Utkarsh Patel <utkarsh.h.patel@xxxxxxxxx>
- [PATCH v2 0/5] Displayport Alternate Mode 2.1 Support
- From: Utkarsh Patel <utkarsh.h.patel@xxxxxxxxx>
- Re: [PATCH 4/5] arm64: dts: qcom: ipq5018: Add USB related nodes
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- Re: [PATCH] arm64: dts: rockchip: Enable TYPE-C PD for ROC-RK3399-PC
- From: Da Xue <da@xxxxxxxxxxxxxxxx>
- Re: [PATCH V2 3/4] arm64: dts: qcom: ipq5018: Add USB related nodes
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- Re: usb-storage: how to extend quirks flags to 64bit?
- From: Milan Broz <gmazyland@xxxxxxxxx>
- Re: [PATCH] usb: gadget: uvc: Move usb_ep_disable() to uvcg_video_enable()
- From: Avichal Rakesh <arakesh@xxxxxxxxxx>
- Re: [PATCH 5/5] arm64: dts: qcom: ipq5018: Enable USB
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- RE: [PATCH v11 2/4] i2c: Add support for Intel LJCA USB I2C driver
- From: "Wu, Wentong" <wentong.wu@xxxxxxxxx>
- Re: [PATCH V2 2/4] phy: qcom-m31: Add compatible, phy init sequence for IPQ5018
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- [PATCH -next] usbmon: Use list_for_each_entry() helper
- From: Jinjie Ruan <ruanjinjie@xxxxxxxxxx>
- Re: [PATCH] usb: hub: Guard against accesses to uninitialized BOS descriptors
- From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
- [PATCH] usb: hub: Guard against accesses to uninitialized BOS descriptors
- From: Ricardo Cañuelo <ricardo.canuelo@xxxxxxxxxxxxx>
- [PATCH 2/2] usb: xhci-mtk: improve split scheduling by separate IN/OUT budget
- From: Chunfeng Yun <chunfeng.yun@xxxxxxxxxxxx>
- Re: [PATCH 2/5] dt-bindings: usb: dwc3: Add IPQ5018 compatible
- From: Nitheesh Sekar <quic_nsekar@xxxxxxxxxxx>
- [PATCH V2 0/4] Enable IPQ5018 USB2 support
- From: Nitheesh Sekar <quic_nsekar@xxxxxxxxxxx>
- Re: [PATCH] usb: hub: Guard against accesses to uninitialized BOS descriptors
- From: Ricardo Cañuelo <ricardo.canuelo@xxxxxxxxxxxxx>
- [PATCH V2 4/4] arm64: dts: qcom: ipq5018: Enable USB
- From: Nitheesh Sekar <quic_nsekar@xxxxxxxxxxx>
- Re: [PATCH v5 12/32] sound: usb: Export USB SND APIs for modules
- From: Amadeusz Sławiński <amadeuszx.slawinski@xxxxxxxxxxxxxxx>
- [PATCH] dt-bindings: usb: dwc3: Add IPQ5018 compatible
- From: Nitheesh Sekar <quic_nsekar@xxxxxxxxxxx>
- Re: [PATCH 5/5] arm64: dts: qcom: ipq5018: Enable USB
- From: Nitheesh Sekar <quic_nsekar@xxxxxxxxxxx>
- [PATCH V2 3/4] arm64: dts: qcom: ipq5018: Add USB related nodes
- From: Nitheesh Sekar <quic_nsekar@xxxxxxxxxxx>
- Re: [PATCH v6 0/2] usb: serial: add support for CH348
- From: Nicolas Frattaroli <frattaroli.nicolas@xxxxxxxxx>
- Re: [PATCH] dt-bindings: usb: dwc3: Add IPQ5018 compatible
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- Re: [PATCH] usb: hub: Guard against accesses to uninitialized BOS descriptors
- From: Ricardo Cañuelo <ricardo.canuelo@xxxxxxxxxxxxx>
- Re: [PATCH V2 2/4] phy: qcom-m31: Add compatible, phy init sequence for IPQ5018
- From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
- Re: [PATCH v4] usb: typec: qcom: Update the logic of regulator enable and disable
- From: Guenter Roeck <linux@xxxxxxxxxxxx>
- [PATCH V2 1/4] dt-bindings: phy: qcom,m31: Add IPQ5018 compatible
- From: Nitheesh Sekar <quic_nsekar@xxxxxxxxxxx>
- Re: [PATCH v4] usb: typec: qcom: Update the logic of regulator enable and disable
- From: hui liu <quic_huliu@xxxxxxxxxxx>
- Re: [RESEND] USB PD broken on Lenovo P15gen2
- From: Nikolay Borisov <nik.borisov@xxxxxxxx>
- [PATCH 1/2] usb: xhci-mtk: add a bandwidth budget table
- From: Chunfeng Yun <chunfeng.yun@xxxxxxxxxxxx>
- Re: [PATCH 4/5] arm64: dts: qcom: ipq5018: Add USB related nodes
- From: Nitheesh Sekar <quic_nsekar@xxxxxxxxxxx>
- [PATCH V2 2/4] phy: qcom-m31: Add compatible, phy init sequence for IPQ5018
- From: Nitheesh Sekar <quic_nsekar@xxxxxxxxxxx>
- Re: [PATCH] usb: hub: Guard against accesses to uninitialized BOS descriptors
- From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
- Re: dwc3: unusual handling of setup requests with wLength == 0
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH] dt-bindings: usb: dwc3: Add IPQ5018 compatible
- From: Nitheesh Sekar <quic_nsekar@xxxxxxxxxxx>
- Re: [PATCH 4/5] arm64: dts: qcom: ipq5018: Add USB related nodes
- From: Nitheesh Sekar <quic_nsekar@xxxxxxxxxxx>
- Re: [PATCH v5 10/32] ASoC: qcom: Add USB backend ASoC driver for Q6
- From: Amadeusz Sławiński <amadeuszx.slawinski@xxxxxxxxxxxxxxx>
- Re: [PATCH v4 2/3] dt-bindings: usb: snps,dwc3: Add runtime-suspend-on-usb-suspend property
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- Re: [PATCH v4] usb: typec: qcom: Update the logic of regulator enable and disable
- From: Guenter Roeck <linux@xxxxxxxxxxxx>
- Re: [PATCH v4 2/3] dt-bindings: usb: snps,dwc3: Add runtime-suspend-on-usb-suspend property
- From: Elson Serrao <quic_eserrao@xxxxxxxxxxx>
- Re: Disconnect interrupt generation for QC targets when role switch is enabled
- From: Krishna Kurapati PSSNV <quic_kriskura@xxxxxxxxxxx>
- [PATCH v4] usb: typec: qcom: Update the logic of regulator enable and disable
- From: Hui Liu via B4 Relay <devnull+quic_huliu.quicinc.com@xxxxxxxxxx>
- Re: [PATCH v4 2/3] dt-bindings: usb: snps,dwc3: Add runtime-suspend-on-usb-suspend property
- From: Thinh Nguyen <Thinh.Nguyen@xxxxxxxxxxxx>
- Re: dwc3: unusual handling of setup requests with wLength == 0
- From: Thinh Nguyen <Thinh.Nguyen@xxxxxxxxxxxx>
- Re: [PATCH v2 08/92] fs: new helper: simple_rename_timestamp
- From: Jeff Layton <jlayton@xxxxxxxxxx>
- [Bug 216728] Thunderbolt USB Controller died after resume on Intel CometLake platform
- From: bugzilla-daemon@xxxxxxxxxx
- Re: [PATCH v2 08/92] fs: new helper: simple_rename_timestamp
- From: Al Viro <viro@xxxxxxxxxxxxxxxxxx>
- Re: [PATCH v2 0/8] fs: add some missing ctime updates
- From: Al Viro <viro@xxxxxxxxxxxxxxxxxx>
- Re: ZDI-CAN-22042: New Vulnerability Report
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: alauda_check_media() doubts
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: alauda_check_media() doubts
- From: Oliver Neukum <oneukum@xxxxxxxx>
- [PATCH v5 12/32] sound: usb: Export USB SND APIs for modules
- From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
- [PATCH v5 16/32] usb: host: xhci-plat: Set XHCI max interrupters if property is present
- From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
- [PATCH v5 32/32] sound: soc: soc-usb: Rediscover USB SND devices on USB port add
- From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
- [PATCH v5 24/32] ASoC: dt-bindings: Update example for enabling USB offload on SM8250
- From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
- [PATCH v5 29/32] sound: soc: qcom: q6usb: Add headphone jack for offload connection status
- From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
- [PATCH v5 17/32] sound: usb: qcom: Add USB QMI definitions
- From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
- [PATCH v5 15/32] usb: dwc3: Add DT parameter to specify maximum number of interrupters
- From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
- [PATCH v5 27/32] sound: soc: qdsp6: Add SND kcontrol to select offload device
- From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
- [PATCH v5 31/32] sound: usb: card: Allow for rediscovery of connected USB SND devices
- From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
- [PATCH v5 18/32] sound: usb: Introduce QC USB SND offloading support
- From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
- [PATCH v5 03/32] xhci: sideband: add initial api to register a sideband entity
- From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
- [PATCH v5 21/32] sound: soc: qcom: qusb6: Ensure PCM format is supported by USB audio device
- From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
- [PATCH v5 01/32] xhci: add support to allocate several interrupters
- From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
- [PATCH v5 28/32] sound: soc: qdsp6: Add SND kcontrol for fetching offload status
- From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
- [PATCH v5 11/32] sound: usb: card: Introduce USB SND platform op callbacks
- From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
- [PATCH v5 30/32] sound: usb: qc_audio_offload: Use card and PCM index from QMI request
- From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
- [PATCH v5 10/32] ASoC: qcom: Add USB backend ASoC driver for Q6
- From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
- [PATCH v5 23/32] ASoC: dt-bindings: Add Q6USB backend
- From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
- [PATCH v5 05/32] usb: host: xhci-mem: Allow for interrupter clients to choose specific index
- From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
- [PATCH v5 22/32] sound: usb: Prevent starting of audio stream if in use
- From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
- [PATCH v5 07/32] ASoC: dt-bindings: qcom,q6dsp-lpass-ports: Add USB_RX port
- From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
- [PATCH v5 04/32] usb: host: xhci-mem: Cleanup pending secondary event ring events
- From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
- [PATCH v5 19/32] sound: usb: card: Check for support for requested audio format
- From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
- [PATCH v5 00/32] Introduce QC USB SND audio offloading support
- From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
- [PATCH v5 25/32] ASoC: qcom: qdsp6: q6afe: Split USB AFE dev_token param into separate API
- From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
- [PATCH v5 20/32] sound: soc: soc-usb: Add PCM format check API for USB backend
- From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
- [PATCH v5 08/32] ASoC: qcom: qdsp6: Introduce USB AFE port to q6dsp
- From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
- [PATCH v5 06/32] ASoC: Add SOC USB APIs for adding an USB backend
- From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
- [PATCH v5 09/32] ASoC: qdsp6: q6afe: Increase APR timeout
- From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
- [PATCH v5 26/32] sound: Pass USB SND card and PCM information to SOC USB
- From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
- [PATCH v5 14/32] dt-bindings: usb: xhci: Add num-hc-interrupters definition
- From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
- [PATCH v5 13/32] dt-bindings: usb: dwc3: Add snps,num-hc-interrupters definition
- From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
- [PATCH v5 02/32] xhci: add helper to stop endpoint and wait for completion
- From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
- ZDI-CAN-22042: New Vulnerability Report
- From: "zdi-disclosures@xxxxxxxxxxxxxx" <zdi-disclosures@xxxxxxxxxxxxxx>
- Re: alauda_check_media() doubts
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH 4/9] dt-bindings: phy: qcom,uniphy: Add ipq5332 USB3 SS UNIPHY
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- Re: [RFC PATCH 0/2] usb: Link USB devices with their USB Type-C partner counterparts
- From: Douglas Gilbert <dgilbert@xxxxxxxxxxxx>
- alauda_check_media() doubts
- From: Oliver Neukum <oneukum@xxxxxxxx>
- Re: [PATCH 4/9] dt-bindings: phy: qcom,uniphy: Add ipq5332 USB3 SS UNIPHY
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- Re: [PATCH 0/9] Enable USB3 for IPQ5332
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- Re: [PATCH 9/9] arm64: defconfig: Enable UNIPHY driver
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- Re: [PATCH 7/9] arm64: dts: qcom: ipq5332: Enable USB SS UNIPHY
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- Re: [PATCH 6/9] arm64: dts: qcom: ipq5332: Add USB3 related nodes
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- Re: [PATCH 5/9] dt-bindings: usb: dwc3: Update IPQ5332 compatible
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- Re: [PATCH 4/9] dt-bindings: phy: qcom,uniphy: Add ipq5332 USB3 SS UNIPHY
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- Re: [PATCH 3/9] phy: qcom: uniphy: Update UNIPHY driver to be a common driver
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- Re: [PATCH 2/9] phy: qcom: uniphy: Rename ipq4019 USB phy driver to UNIPHY driver
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- Re: [PATCH 1/9] dt-bindings: phy: qcom,uniphy: Rename ipq4019 usb PHY to UNIPHY
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- Re: [PATCH 4/9] dt-bindings: phy: qcom,uniphy: Add ipq5332 USB3 SS UNIPHY
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH 6/9] arm64: dts: qcom: ipq5332: Add USB3 related nodes
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- Re: [PATCH 8/9] phy: qcom: uniphy: Add ipq5332 USB UNIPHY support
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- Re: [PATCH 3/9] phy: qcom: uniphy: Update UNIPHY driver to be a common driver
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- Re: [PATCH 4/9] dt-bindings: phy: qcom,uniphy: Add ipq5332 USB3 SS UNIPHY
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH 1/9] dt-bindings: phy: qcom,uniphy: Rename ipq4019 usb PHY to UNIPHY
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- Re: [PATCH 4/9] dt-bindings: phy: qcom,uniphy: Add ipq5332 USB3 SS UNIPHY
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- Re: [PATCH v4 31/32] sound: usb: card: Allow for rediscovery of connected USB SND devices
- From: Takashi Iwai <tiwai@xxxxxxx>
- [PATCH 9/9] arm64: defconfig: Enable UNIPHY driver
- From: Praveenkumar I <quic_ipkumar@xxxxxxxxxxx>
- [PATCH 8/9] phy: qcom: uniphy: Add ipq5332 USB UNIPHY support
- From: Praveenkumar I <quic_ipkumar@xxxxxxxxxxx>
- [PATCH 6/9] arm64: dts: qcom: ipq5332: Add USB3 related nodes
- From: Praveenkumar I <quic_ipkumar@xxxxxxxxxxx>
- [PATCH 7/9] arm64: dts: qcom: ipq5332: Enable USB SS UNIPHY
- From: Praveenkumar I <quic_ipkumar@xxxxxxxxxxx>
- [PATCH 5/9] dt-bindings: usb: dwc3: Update IPQ5332 compatible
- From: Praveenkumar I <quic_ipkumar@xxxxxxxxxxx>
- [PATCH 2/9] phy: qcom: uniphy: Rename ipq4019 USB phy driver to UNIPHY driver
- From: Praveenkumar I <quic_ipkumar@xxxxxxxxxxx>
- [PATCH 4/9] dt-bindings: phy: qcom,uniphy: Add ipq5332 USB3 SS UNIPHY
- From: Praveenkumar I <quic_ipkumar@xxxxxxxxxxx>
- [PATCH 3/9] phy: qcom: uniphy: Update UNIPHY driver to be a common driver
- From: Praveenkumar I <quic_ipkumar@xxxxxxxxxxx>
- [PATCH 0/9] Enable USB3 for IPQ5332
- From: Praveenkumar I <quic_ipkumar@xxxxxxxxxxx>
- [PATCH 1/9] dt-bindings: phy: qcom,uniphy: Rename ipq4019 usb PHY to UNIPHY
- From: Praveenkumar I <quic_ipkumar@xxxxxxxxxxx>
- Re: [PATCH] usb: hcd: xhci: Add set command timer delay API
- From: Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx>
- Re: [PATCH v2] usb: xhci-plat: fix usb disconnect issue after s4
- From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
- Re: Disconnect interrupt generation for QC targets when role switch is enabled
- From: Krishna Kurapati PSSNV <quic_kriskura@xxxxxxxxxxx>
- Re: [PATCH v2] usb: xhci-plat: fix usb disconnect issue after s4
- From: Yinbo Zhu <zhuyinbo@xxxxxxxxxxx>
- [PATCH v2 2/2] dt-bindings: extcon: Add Realtek DHC RTD SoC Type-C
- From: Stanley Chang <stanley_chang@xxxxxxxxxxx>
- [PATCH v2 1/2] extcon: add Realtek DHC RTD SoC Type-C driver
- From: Stanley Chang <stanley_chang@xxxxxxxxxxx>
- [PATCH] [PATCH v3] usb: gadget: f_uac2: uevent changes for uac2
- From: Akash Kumar <quic_akakum@xxxxxxxxxxx>
- Re: [PATCH v3 11/28] dt-bindings: usb: dwc3: Add snps,num-hc-interrupters definition
- From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
- RE: [PATCH v10 2/4] i2c: Add support for Intel LJCA USB I2C driver
- From: "Wu, Wentong" <wentong.wu@xxxxxxxxx>
- Re: [PATCH v10 2/4] i2c: Add support for Intel LJCA USB I2C driver
- From: Wolfram Sang <wsa@xxxxxxxxxx>
- Re: [PATCH v3 11/28] dt-bindings: usb: dwc3: Add snps,num-hc-interrupters definition
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- Re: [PATCH v3 11/28] dt-bindings: usb: dwc3: Add snps,num-hc-interrupters definition
- From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
- Re: [PATCH v3 11/28] dt-bindings: usb: dwc3: Add snps,num-hc-interrupters definition
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- Re: [PATCH v4 13/32] dt-bindings: usb: dwc3: Add snps,num-hc-interrupters definition
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- [PATCH v11 4/4] gpio: update Intel LJCA USB GPIO driver
- From: Wentong Wu <wentong.wu@xxxxxxxxx>
- [PATCH v11 3/4] spi: Add support for Intel LJCA USB SPI driver
- From: Wentong Wu <wentong.wu@xxxxxxxxx>
- [PATCH v11 2/4] i2c: Add support for Intel LJCA USB I2C driver
- From: Wentong Wu <wentong.wu@xxxxxxxxx>
- [PATCH v11 1/4] usb: Add support for Intel LJCA device
- From: Wentong Wu <wentong.wu@xxxxxxxxx>
- [PATCH v11 0/4] Add Intel LJCA device driver
- From: Wentong Wu <wentong.wu@xxxxxxxxx>
- RE: [PATCH v10 2/4] i2c: Add support for Intel LJCA USB I2C driver
- From: "Wu, Wentong" <wentong.wu@xxxxxxxxx>
- RE: [EXT] Re: [PATCH 1/2] usb: typec: tcpci: add check code for tcpci/regmap_read/write()
- From: Xu Yang <xu.yang_2@xxxxxxx>
- Re: [PATCH v3 11/28] dt-bindings: usb: dwc3: Add snps,num-hc-interrupters definition
- From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
- Re: [PATCH v4 0/2] Add support for TPS25750
- From: Abdel Alkuor <alkuor@xxxxxxxxx>
- Re: [PATCH v4 0/3] drm: simplify support for transparent DRM bridges
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- RFC: lsucpd for listing typec and USB-C PD information
- From: Douglas Gilbert <dgilbert@xxxxxxxxxxxx>
- Re: [PATCH v4 2/3] dt-bindings: usb: snps,dwc3: Add runtime-suspend-on-usb-suspend property
- From: Elson Serrao <quic_eserrao@xxxxxxxxxxx>
- Re: [PATCH v4 31/32] sound: usb: card: Allow for rediscovery of connected USB SND devices
- From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
- Re: [PATCH net-next] r8152: add vendor/device ID pair for D-Link DUB-E250
- From: patchwork-bot+netdevbpf@xxxxxxxxxx
- Re: [PATCH v10 2/4] i2c: Add support for Intel LJCA USB I2C driver
- From: Wolfram Sang <wsa@xxxxxxxxxx>
- Re: Disconnect interrupt generation for QC targets when role switch is enabled
- From: Bjorn Andersson <quic_bjorande@xxxxxxxxxxx>
- [PATCH v2 3/3] usb: gadgetfs: return USB_GADGET_DELAYED_STATUS from setup()
- From: andrey.konovalov@xxxxxxxxx
- [PATCH v2 2/3] usb: raw-gadget: return USB_GADGET_DELAYED_STATUS from setup()
- From: andrey.konovalov@xxxxxxxxx
- [PATCH v2 1/3] usb: gadget: clarify usage of USB_GADGET_DELAYED_STATUS
- From: andrey.konovalov@xxxxxxxxx
- Re: [PATCH 3/3] usb: gadgetfs: return USB_GADGET_DELAYED_STATUS from setup()
- From: Andrey Konovalov <andreyknvl@xxxxxxxxx>
- Re: [PATCH v2 RESEND 2/2] dt-bindings: usb: dwc3: Add DWC_usb3 TX/RX threshold configurable
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH 3/3] usb: gadgetfs: return USB_GADGET_DELAYED_STATUS from setup()
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- [RESEND] USB PD broken on Lenovo P15gen2
- From: Nikolay Borisov <nik.borisov@xxxxxxxx>
- Re: [PATCH 1/3] usb: gadget: clarify usage of USB_GADGET_DELAYED_STATUS
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- [PATCH v11 11/13] arm64: dts: qcom: sc8280xp: Add multiport controller node for SC8280
- From: Krishna Kurapati <quic_kriskura@xxxxxxxxxxx>
- [PATCH v11 13/13] arm64: dts: qcom: sa8540-ride: Enable first port of tertiary usb controller
- From: Krishna Kurapati <quic_kriskura@xxxxxxxxxxx>
- [PATCH v11 12/13] arm64: dts: qcom: sa8295p: Enable tertiary controller and its 4 USB ports
- From: Krishna Kurapati <quic_kriskura@xxxxxxxxxxx>
- [PATCH v11 08/13] usb: dwc3: qcom: Refactor IRQ handling in QCOM Glue driver
- From: Krishna Kurapati <quic_kriskura@xxxxxxxxxxx>
- [PATCH v11 07/13] usb: dwc3: qcom: Add helper function to request threaded IRQ
- From: Krishna Kurapati <quic_kriskura@xxxxxxxxxxx>
- [PATCH v11 10/13] usb: dwc3: qcom: Add multiport suspend/resume support for wrapper
- From: Krishna Kurapati <quic_kriskura@xxxxxxxxxxx>
- [PATCH v11 06/13] usb: dwc3: core: Refactor PHY logic to support Multiport Controller
- From: Krishna Kurapati <quic_kriskura@xxxxxxxxxxx>
- [PATCH v11 09/13] usb: dwc3: qcom: Enable wakeup for applicable ports of multiport
- From: Krishna Kurapati <quic_kriskura@xxxxxxxxxxx>
- [PATCH v11 02/13] dt-bindings: usb: Add bindings for multiport properties on DWC3 controller
- From: Krishna Kurapati <quic_kriskura@xxxxxxxxxxx>
- [PATCH v11 00/13] Add multiport support for DWC3 controllers
- From: Krishna Kurapati <quic_kriskura@xxxxxxxxxxx>
- [PATCH v11 04/13] usb: dwc3: core: Access XHCI address space temporarily to read port info
- From: Krishna Kurapati <quic_kriskura@xxxxxxxxxxx>
- [PATCH v11 05/13] usb: dwc3: core: Skip setting event buffers for host only controllers
- From: Krishna Kurapati <quic_kriskura@xxxxxxxxxxx>
- [PATCH v11 03/13] usb: xhci: Move extcaps related macros to respective header file
- From: Krishna Kurapati <quic_kriskura@xxxxxxxxxxx>
- [PATCH v11 01/13] dt-bindings: usb: qcom,dwc3: Add bindings for SC8280 Multiport
- From: Krishna Kurapati <quic_kriskura@xxxxxxxxxxx>
- Lacie USB3-FW needs a few resets to be detected properly
- From: Julian Sikorski <belegdol@xxxxxxxxx>
- Re: [PATCH] USB: dwc2: hande irq on dead controller correctly
- From: Oliver Neukum <oneukum@xxxxxxxx>
- Re: [PATCH] usb: misc: eud: Fix missing IRQ check in eud_probe()
- From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
- Re: [PATCH] USB: dwc2: hande irq on dead controller correctly
- From: Minas Harutyunyan <Minas.Harutyunyan@xxxxxxxxxxxx>
- Re: usb: gadget: dwc2: not getting audio data
- From: Minas Harutyunyan <Minas.Harutyunyan@xxxxxxxxxxxx>
- Re: [PATCH v4 2/2] USB: typec: Add TI TPS25750 USB Type-C controller
- From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
- Re: [PATCH v3] usb: typec: qcom: check regulator enable status before disabling it
- From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
- Re: [PATCH v3] usb: typec: qcom: check regulator enable status before disabling it
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- Re: [PATCH v3] usb: typec: qcom: check regulator enable status before disabling it
- From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
- Re: [PATCH 1/2] usb: typec: tcpci: add check code for tcpci/regmap_read/write()
- From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v2] usb: typec: qcom: check regulator enable status before disabling it
- From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
- [PATCH 1/2] usb: typec: tcpci: add check code for tcpci/regmap_read/write()
- From: Xu Yang <xu.yang_2@xxxxxxx>
- [PATCH 2/2] usb: typec: tcpci: enable vSafe0v Detection and Auto Discharge Disconnect for PTN5110
- From: Xu Yang <xu.yang_2@xxxxxxx>
- Re: [RFC PATCH 0/2] usb: Link USB devices with their USB Type-C partner counterparts
- From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
- Re: [PATCH 30/30] usb: ohci-st: Use devm_platform_get_and_ioremap_resource()
- From: Patrice CHOTARD <patrice.chotard@xxxxxxxxxxx>
- Re: [PATCH 28/30] usb: ehci-st: Use devm_platform_get_and_ioremap_resource()
- From: Patrice CHOTARD <patrice.chotard@xxxxxxxxxxx>
- Re: [PATCH v10 4/4] gpio: update Intel LJCA USB GPIO driver
- From: Bartosz Golaszewski <brgl@xxxxxxxx>
- [PATCH v2 RESEND 1/2] usb: dwc3: core: configure TX/RX threshold for DWC3_IP
- From: Stanley Chang <stanley_chang@xxxxxxxxxxx>
- Re: [PATCH v2] usb: typec: qcom: check regulator enable status before disabling it
- From: hui liu <quic_huliu@xxxxxxxxxxx>
- [PATCH v2 RESEND 2/2] dt-bindings: usb: dwc3: Add DWC_usb3 TX/RX threshold configurable
- From: Stanley Chang <stanley_chang@xxxxxxxxxxx>
- [PATCH v3] usb: typec: qcom: check regulator enable status before disabling it
- From: Hui Liu via B4 Relay <devnull+quic_huliu.quicinc.com@xxxxxxxxxx>
- [PATCH 3/3] usb: gadgetfs: return USB_GADGET_DELAYED_STATUS from setup()
- From: andrey.konovalov@xxxxxxxxx
- [PATCH 1/3] usb: gadget: clarify usage of USB_GADGET_DELAYED_STATUS
- From: andrey.konovalov@xxxxxxxxx
- [PATCH 2/3] usb: raw-gadget: return USB_GADGET_DELAYED_STATUS from setup()
- From: andrey.konovalov@xxxxxxxxx
- Re: usb-storage: how to extend quirks flags to 64bit?
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- [PATCH (v2)] docs: ABI: sysfs-tty: close times are in centiseconds
- From: Simon Arlott <simon@xxxxxxxxxxx>
- Re: usb-storage: how to extend quirks flags to 64bit?
- From: Milan Broz <gmazyland@xxxxxxxxx>
- Re: usb-storage: how to extend quirks flags to 64bit?
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH] USB: cdc-acm: expose serial close_delay and closing_wait in sysfs
- From: Simon Arlott <simon@xxxxxxxxxxx>
- Re: [GIT PULL] USB-serial updates for 6.6-rc1
- From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
- [GIT PULL] USB-serial updates for 6.6-rc1
- From: Johan Hovold <johan@xxxxxxxxxx>
- usb-storage: how to extend quirks flags to 64bit?
- From: Milan Broz <gmazyland@xxxxxxxxx>
- [PATCH v10 4/4] gpio: update Intel LJCA USB GPIO driver
- From: Wentong Wu <wentong.wu@xxxxxxxxx>
- [PATCH v10 3/4] spi: Add support for Intel LJCA USB SPI driver
- From: Wentong Wu <wentong.wu@xxxxxxxxx>
- [PATCH v10 0/4] Add Intel LJCA device driver
- From: Wentong Wu <wentong.wu@xxxxxxxxx>
- [PATCH v10 2/4] i2c: Add support for Intel LJCA USB I2C driver
- From: Wentong Wu <wentong.wu@xxxxxxxxx>
- [PATCH v10 1/4] usb: Add support for Intel LJCA device
- From: Wentong Wu <wentong.wu@xxxxxxxxx>
- Re: [PATCH] usb: misc: eud: Fix missing IRQ check in eud_probe()
- From: Zhang Shurong <zhang_shurong@xxxxxxxxxxx>
- Re: [PATCH] usb: misc: eud: Fix missing IRQ check in eud_probe()
- From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
- [PATCH] usb: misc: eud: Fix missing IRQ check in eud_probe()
- From: Zhang Shurong <zhang_shurong@xxxxxxxxxxx>
- Re: [PATCH v4 1/2] platform/chrome: cros_ec_typec: Configure Retimer cable type
- From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v4 2/3] dt-bindings: usb: snps,dwc3: Add runtime-suspend-on-usb-suspend property
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- Re: [PATCH v4 1/2] platform/chrome: cros_ec_typec: Configure Retimer cable type
- From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
- [syzbot] [media?] [usb?] KASAN: slab-out-of-bounds Read in imon_probe
- From: syzbot <syzbot+59875ffef5cb9c9b29e9@xxxxxxxxxxxxxxxxxxxxxxxxx>
- [PATCH v6 1/2] usb: dwc3: add Realtek DHC RTD SoC dwc3 glue layer driver
- From: Stanley Chang <stanley_chang@xxxxxxxxxxx>
- [PATCH v6 2/2] dt-bindings: usb: dwc3: Add Realtek DHC RTD SoC DWC3 USB
- From: Stanley Chang <stanley_chang@xxxxxxxxxxx>
- Re: dwc3: unusual handling of setup requests with wLength == 0
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- RE: [PATCH v5 1/2] usb: dwc3: add Realtek DHC RTD SoC dwc3 glue layer driver
- From: Stanley Chang[昌育德] <stanley_chang@xxxxxxxxxxx>
- Re: [PATCH v4 2/3] dt-bindings: usb: snps,dwc3: Add runtime-suspend-on-usb-suspend property
- From: Thinh Nguyen <Thinh.Nguyen@xxxxxxxxxxxx>
- Re: [PATCH v5 1/2] usb: dwc3: add Realtek DHC RTD SoC dwc3 glue layer driver
- From: Thinh Nguyen <Thinh.Nguyen@xxxxxxxxxxxx>
- Re: dwc3: unusual handling of setup requests with wLength == 0
- From: Thinh Nguyen <Thinh.Nguyen@xxxxxxxxxxxx>
- [PATCH net-next] r8152: add vendor/device ID pair for D-Link DUB-E250
- From: "Antonio Napolitano" <anton@xxxxxxxx>
- RE: [PATCH v4 1/2] platform/chrome: cros_ec_typec: Configure Retimer cable type
- From: "Patel, Utkarsh H" <utkarsh.h.patel@xxxxxxxxx>
- RE: usb: gadget: dwc2: not getting audio data
- From: PALAK SHAH <palak.shah@xxxxxxxxxxx>
- [Bug 216728] Thunderbolt USB Controller died after resume on Intel CometLake platform
- From: bugzilla-daemon@xxxxxxxxxx
- Re: [PATCH 4/5] arm64: dts: qcom: ipq5018: Add USB related nodes
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- Re: [PATCH 5/5] arm64: dts: qcom: ipq5018: Enable USB
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- Re: [PATCH 4/5] arm64: dts: qcom: ipq5018: Add USB related nodes
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- Re: [PATCH 2/5] dt-bindings: usb: dwc3: Add IPQ5018 compatible
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- Re: [PATCH 1/5] dt-bindings: phy: qcom,m31: Add IPQ5018 compatible
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- Re: [PATCH v2] usb: typec: qcom: check regulator enable status before disabling it
- From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
- Re: [PATCH v2] usb: typec: qcom: check regulator enable status before disabling it
- From: hui liu <quic_huliu@xxxxxxxxxxx>
- Re: [PATCH] Fix nomenclature for USB and PCI wireless devices
- From: Kalle Valo <kvalo@xxxxxxxxxx>
- [PATCH 2/5] dt-bindings: usb: dwc3: Add IPQ5018 compatible
- From: Nitheesh Sekar <quic_nsekar@xxxxxxxxxxx>
- [PATCH 3/5] phy: qcom-m31: Add compatible, phy init sequence for IPQ5018
- From: Nitheesh Sekar <quic_nsekar@xxxxxxxxxxx>
- [PATCH 4/5] arm64: dts: qcom: ipq5018: Add USB related nodes
- From: Nitheesh Sekar <quic_nsekar@xxxxxxxxxxx>
- [PATCH 5/5] arm64: dts: qcom: ipq5018: Enable USB
- From: Nitheesh Sekar <quic_nsekar@xxxxxxxxxxx>
- [PATCH 0/5] Enable IPQ5018 USB2 support
- From: Nitheesh Sekar <quic_nsekar@xxxxxxxxxxx>
- [PATCH 1/5] dt-bindings: phy: qcom,m31: Add IPQ5018 compatible
- From: Nitheesh Sekar <quic_nsekar@xxxxxxxxxxx>
- [PATCH -next] USB: c67x00: Remove unused declaration c67x00_hcd_msg_received()
- From: Yue Haibing <yuehaibing@xxxxxxxxxx>
- Re: [PATCH v2] usb: typec: intel_pmc_mux: enable sysfs usb role access
- From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH] USB: cdc-acm: expose serial close_delay and closing_wait in sysfs
- From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
- [PATCH v2] usb: typec: intel_pmc_mux: enable sysfs usb role access
- From: Uday M Bhat <uday.m.bhat@xxxxxxxxx>
- [PATCH] usb: typec: intel_pmc_mux: enable sysfs usb role access
- From: Uday M Bhat <uday.m.bhat@xxxxxxxxx>
- Re: [PATCH] docs: ABI: sysfs-tty: close times are in hundredths of a second
- From: Jiri Slaby <jirislaby@xxxxxxxxxx>
- Re: dwc3: unusual handling of setup requests with wLength == 0
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH] USB: cdc-acm: expose serial close_delay and closing_wait in sysfs
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: dwc3: unusual handling of setup requests with wLength == 0
- From: Andrey Konovalov <andreyknvl@xxxxxxxxx>
- Re: [PATCH] usb: cdnsp: Fixes issue with dequeuing not queued requests
- From: Peter Chen <hzpeterchen@xxxxxxxxx>
- RE: [PATCH 3/4] platform/chrome: cros_ec_typec: Add Displayport Alternatemode 2.1 Support
- From: "Patel, Utkarsh H" <utkarsh.h.patel@xxxxxxxxx>
- [PATCH v7 2/3] drm/bridge_connector: stop filtering events in drm_bridge_connector_hpd_cb()
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- [PATCH v7 3/3] drm/bridge_connector: implement oob_hotplug_event
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- [PATCH v7 1/3] drm: Add HPD state to drm_connector_oob_hotplug_event()
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- [PATCH v7 0/3] drm/bridge_connector: implement OOB HPD handling
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- Re: [PATCH] USB: cdc-acm: expose serial close_delay and closing_wait in sysfs
- From: Oliver Neukum <oneukum@xxxxxxxx>
- Re: [PATCH v5 2/2] dt-bindings: usb: dwc3: Add Realtek DHC RTD SoC DWC3 USB
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH] USB: cdc-acm: expose serial close_delay and closing_wait in sysfs
- From: Simon Arlott <simon@xxxxxxxxxxx>
- [PATCH v2 10/10] xhci: Clean up xhci_{alloc,free}_erst() declarations
- From: Lukas Wunner <lukas@xxxxxxxxx>
- Re: [RFC PATCH 0/2] usb: Link USB devices with their USB Type-C partner counterparts
- From: Douglas Gilbert <dgilbert@xxxxxxxxxxxx>
- [PATCH v2 09/10] xhci: Clean up stale comment on ERST_SIZE macro
- From: Lukas Wunner <lukas@xxxxxxxxx>
- [PATCH v2 08/10] xhci: Clean up ERST_PTR_MASK inversion
- From: Lukas Wunner <lukas@xxxxxxxxx>
- [PATCH v2 07/10] xhci: Expose segment numbers in debugfs
- From: Lukas Wunner <lukas@xxxxxxxxx>
- [PATCH v2 04/10] xhci: Use more than one Event Ring segment
- From: Lukas Wunner <lukas@xxxxxxxxx>
- [PATCH v2 06/10] xhci: Update last segment pointer after Event Ring expansion
- From: Lukas Wunner <lukas@xxxxxxxxx>
- [PATCH v2 05/10] xhci: Adjust segment numbers after ring expansion
- From: Lukas Wunner <lukas@xxxxxxxxx>
- [PATCH v2 03/10] xhci: Set DESI bits in ERDP register correctly
- From: Lukas Wunner <lukas@xxxxxxxxx>
- [PATCH v2 02/10] xhci: Preserve RsvdP bits in ERSTBA register correctly
- From: Lukas Wunner <lukas@xxxxxxxxx>
- [PATCH v2 01/10] xhci: Clear EHB bit only at end of interrupt handler
- From: Lukas Wunner <lukas@xxxxxxxxx>
- [PATCH v2 00/10] Multi-segment Event Ring support for XHCI
- From: Lukas Wunner <lukas@xxxxxxxxx>
- Re: [PATCH v2] usb: typec: qcom: check regulator enable status before disabling it
- From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
- Re: [PATCH] USB: cdc-acm: expose serial close_delay and closing_wait in sysfs
- From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v2] usb: typec: qcom: check regulator enable status before disabling it
- From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
- Re: [PATCH v2] usb: typec: qcom: check regulator enable status before disabling it
- From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
- [usb:usb-testing] BUILD SUCCESS 78e0ea4277546debf7e96797ac3b768539cc44f6
- From: kernel test robot <lkp@xxxxxxxxx>
- Re: [PATCH v2] usb: typec: qcom: check regulator enable status before disabling it
- From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
- [PATCH v5 1/2] usb: dwc3: add Realtek DHC RTD SoC dwc3 glue layer driver
- From: Stanley Chang <stanley_chang@xxxxxxxxxxx>
- [PATCH v5 2/2] dt-bindings: usb: dwc3: Add Realtek DHC RTD SoC DWC3 USB
- From: Stanley Chang <stanley_chang@xxxxxxxxxxx>
- Re: [PATCH] USB: cdc-acm: expose serial close_delay and closing_wait in sysfs
- From: Oliver Neukum <oneukum@xxxxxxxx>
- [PATCH] docs: ABI: sysfs-tty: close times are in hundredths of a second
- From: Simon Arlott <simon@xxxxxxxxxxx>
- Re: [PATCH v1 1/3] dt-bindings: usb: Add HPE GXP UDCG Controller
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- [PATCH v2] usb: typec: qcom: check regulator enable status before disabling it
- From: Hui Liu via B4 Relay <devnull+quic_huliu.quicinc.com@xxxxxxxxxx>
- Re: dwc3: unusual handling of setup requests with wLength == 0
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- RE: [PATCH v9 4/4] gpio: update Intel LJCA USB GPIO driver
- From: "Wu, Wentong" <wentong.wu@xxxxxxxxx>
- Re: dwc3: unusual handling of setup requests with wLength == 0
- From: Thinh Nguyen <Thinh.Nguyen@xxxxxxxxxxxx>
- [PATCH (v2)] USB: cdc-acm: expose serial close_delay and closing_wait in sysfs
- From: Simon Arlott <simon@xxxxxxxxxxx>
- [PATCH] USB: cdc-acm: expose serial close_delay and closing_wait in sysfs
- From: Simon Arlott <simon@xxxxxxxxxxx>
- Re: dwc3: unusual handling of setup requests with wLength == 0
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v9 4/4] gpio: update Intel LJCA USB GPIO driver
- From: "sakari.ailus@xxxxxxxxxxxxxxx" <sakari.ailus@xxxxxxxxxxxxxxx>
- Re: dwc3: unusual handling of setup requests with wLength == 0
- From: Thinh Nguyen <Thinh.Nguyen@xxxxxxxxxxxx>
- Re: dwc3: unusual handling of setup requests with wLength == 0
- From: Thinh Nguyen <Thinh.Nguyen@xxxxxxxxxxxx>
- RE: [PATCH v1 1/3] dt-bindings: usb: Add HPE GXP UDCG Controller
- From: "Yu, Richard" <richard.yu@xxxxxxx>
- Re: dwc3: unusual handling of setup requests with wLength == 0
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH 2/4] usb: typec: tcpci_rt1711h: Convert enum->pointer for data in the match tables
- From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
- Re: [PATCH v4 1/2] platform/chrome: cros_ec_typec: Configure Retimer cable type
- From: Prashant Malani <pmalani@xxxxxxxxxxxx>
- Re: [PATCH 2/4] usb: typec: tcpci_rt1711h: Convert enum->pointer for data in the match tables
- From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
- Re: dwc3: unusual handling of setup requests with wLength == 0
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH 2/4] usb: typec: tcpci_rt1711h: Convert enum->pointer for data in the match tables
- From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
- Re: [PATCH 2/4] usb: typec: tcpci_rt1711h: Convert enum->pointer for data in the match tables
- From: Andi Shyti <andi.shyti@xxxxxxxxxx>
- Re: [PATCH] usb: typec: qcom: check regulator enable status before disabling it
- From: Guenter Roeck <linux@xxxxxxxxxxxx>
- Re: [PATCH] usb: typec: tcpm: reset counter when enter into unattached state after try role
- From: Guenter Roeck <linux@xxxxxxxxxxxx>
[Index of Archives]
[Linux USB Devel (old)]
[Linux Input]
[Linux SCSI]
[Samba]
[Yosemite News]