[PATCH v5 1/2] dt-bindings: connector: Add child nodes for multiple PD capabilities

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Commit 662a60102c12 ("usb: typec: Separate USB Power Delivery from USB
Type-C") allows userspace to configure the PD of a port by selecting
different set of predefined PD capabilities. Define the PD capability
sets in DT for better configurability in device modules.

Define an optional child node "capabilities" to contain multiple USB
Power Delivery capabilities.

Define child nodes with pattern (e.g. caps-0, caps-1) under
"capabilities". Each node contains PDO data of a selectable Power
Delivery capability.

Also define common properties for source-pdos, sink-pdos, and
op-sink-microwatt that can be referenced.

Signed-off-by: Kyle Tso <kyletso@xxxxxxxxxx>
---
v4 -> v5:
- Fixed DT_CHECK errors

 .../bindings/connector/usb-connector.yaml     | 88 +++++++++++++------
 1 file changed, 59 insertions(+), 29 deletions(-)

diff --git a/Documentation/devicetree/bindings/connector/usb-connector.yaml b/Documentation/devicetree/bindings/connector/usb-connector.yaml
index 7c8a3e8430d3..7945d09d1f59 100644
--- a/Documentation/devicetree/bindings/connector/usb-connector.yaml
+++ b/Documentation/devicetree/bindings/connector/usb-connector.yaml
@@ -14,6 +14,8 @@ description:
   of a USB interface controller or a separate node when it is attached to both
   MUX and USB interface controller.
 
+$ref: "#/$defs/capabilities"
+
 properties:
   compatible:
     oneOf:
@@ -67,6 +69,15 @@ properties:
       model it as a regulator. See bindings/regulator/fixed-regulator.yaml
 
   # The following are optional properties for "usb-c-connector".
+  source-pdos:
+    $ref: "#/$defs/capabilities/properties/source-pdos"
+
+  sink-pdos:
+    $ref: "#/$defs/capabilities/properties/sink-pdos"
+
+  op-sink-microwatt:
+    $ref: "#/$defs/capabilities/properties/op-sink-microwatt"
+
   power-role:
     description: Determines the power role that the Type C connector will
       support. "dual" refers to Dual Role Port (DRP).
@@ -119,30 +130,6 @@ properties:
 
   # The following are optional properties for "usb-c-connector" with power
   # delivery support.
-  source-pdos:
-    description: An array of u32 with each entry providing supported power
-      source data object(PDO), the detailed bit definitions of PDO can be found
-      in "Universal Serial Bus Power Delivery Specification" chapter 6.4.1.2
-      Source_Capabilities Message, the order of each entry(PDO) should follow
-      the PD spec chapter 6.4.1. Required for power source and power dual role.
-      User can specify the source PDO array via PDO_FIXED/BATT/VAR/PPS_APDO()
-      defined in dt-bindings/usb/pd.h.
-    minItems: 1
-    maxItems: 7
-    $ref: /schemas/types.yaml#/definitions/uint32-array
-
-  sink-pdos:
-    description: An array of u32 with each entry providing supported power sink
-      data object(PDO), the detailed bit definitions of PDO can be found in
-      "Universal Serial Bus Power Delivery Specification" chapter 6.4.1.3
-      Sink Capabilities Message, the order of each entry(PDO) should follow the
-      PD spec chapter 6.4.1. Required for power sink and power dual role. User
-      can specify the sink PDO array via PDO_FIXED/BATT/VAR/PPS_APDO() defined
-      in dt-bindings/usb/pd.h.
-    minItems: 1
-    maxItems: 7
-    $ref: /schemas/types.yaml#/definitions/uint32-array
-
   sink-vdos:
     description: An array of u32 with each entry, a Vendor Defined Message Object (VDO),
       providing additional information corresponding to the product, the detailed bit
@@ -166,11 +153,6 @@ properties:
     maxItems: 6
     $ref: /schemas/types.yaml#/definitions/uint32-array
 
-  op-sink-microwatt:
-    description: Sink required operating power in microwatt, if source can't
-      offer the power, Capability Mismatch is set. Required for power sink and
-      power dual role.
-
   port:
     $ref: /schemas/graph.yaml#/properties/port
     description: OF graph bindings modeling a data bus to the connector, e.g.
@@ -231,6 +213,20 @@ properties:
       SNK_READY for non-pd link.
     type: boolean
 
+  capabilities:
+    description: A child node to contain all the selectable USB Power Delivery capabilities.
+    type: object
+
+    patternProperties:
+      "^caps-[0-9]+$":
+        description: Child nodes under "capabilities" node. Each node contains a selectable USB
+          Power Delivery capability.
+        type: object
+        $ref: "#/$defs/capabilities"
+        unevaluatedProperties: false
+
+    additionalProperties: false
+
 dependencies:
   sink-vdos-v1: [ sink-vdos ]
   sink-vdos: [ sink-vdos-v1 ]
@@ -238,6 +234,40 @@ dependencies:
 required:
   - compatible
 
+$defs:
+  capabilities:
+    type: object
+
+    properties:
+      source-pdos:
+        description: An array of u32 with each entry providing supported power
+          source data object(PDO), the detailed bit definitions of PDO can be found
+          in "Universal Serial Bus Power Delivery Specification" chapter 6.4.1.2
+          Source_Capabilities Message, the order of each entry(PDO) should follow
+          the PD spec chapter 6.4.1. Required for power source and power dual role.
+          User can specify the source PDO array via PDO_FIXED/BATT/VAR/PPS_APDO()
+          defined in dt-bindings/usb/pd.h.
+        minItems: 1
+        maxItems: 7
+        $ref: /schemas/types.yaml#/definitions/uint32-array
+
+      sink-pdos:
+        description: An array of u32 with each entry providing supported power sink
+          data object(PDO), the detailed bit definitions of PDO can be found in
+          "Universal Serial Bus Power Delivery Specification" chapter 6.4.1.3
+          Sink Capabilities Message, the order of each entry(PDO) should follow the
+          PD spec chapter 6.4.1. Required for power sink and power dual role. User
+          can specify the sink PDO array via PDO_FIXED/BATT/VAR/PPS_APDO() defined
+          in dt-bindings/usb/pd.h.
+        minItems: 1
+        maxItems: 7
+        $ref: /schemas/types.yaml#/definitions/uint32-array
+
+      op-sink-microwatt:
+        description: Sink required operating power in microwatt, if source can't
+          offer the power, Capability Mismatch is set. Required for power sink and
+          power dual role.
+
 allOf:
   - if:
       properties:
-- 
2.43.0.472.g3155946c3a-goog





[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux