The realtime Power Delivery capabilities of a port may not be always the
same under different hardware status such as the port usage of a
multiple port system or the status of the battery pack. Define the PD
capability sets in DT for better configurability in Type-C/PD port
drivers.
Define an optional child node "capabilities" to contain multiple USB
Power Delivery capabilities.
Define child nodes with pattern (e.g. caps-0, caps-1) under
"capabilities". Each node contains PDO data of a selectable Power
Delivery capability.
Also define common properties for source-pdos, sink-pdos, and
op-sink-microwatt that can be referenced.
Signed-off-by: Kyle Tso <kyletso@xxxxxxxxxx>
---
v3 -> v4
- modified the structure of the bindings as corrected in v2
- modified the commit message to better describe the reason of this
change
.../bindings/connector/usb-connector.yaml | 78 ++++++++++++-------
1 file changed, 49 insertions(+), 29 deletions(-)
diff --git a/Documentation/devicetree/bindings/connector/usb-connector.yaml b/Documentation/devicetree/bindings/connector/usb-connector.yaml
index 7c8a3e8430d3..50fec97436d8 100644
--- a/Documentation/devicetree/bindings/connector/usb-connector.yaml
+++ b/Documentation/devicetree/bindings/connector/usb-connector.yaml
@@ -14,6 +14,8 @@ description:
of a USB interface controller or a separate node when it is attached to both
MUX and USB interface controller.
+$ref: "#/$defs/capabilities"
+
properties:
compatible:
oneOf:
@@ -119,30 +121,6 @@ properties:
# The following are optional properties for "usb-c-connector" with power
# delivery support.
- source-pdos:
- description: An array of u32 with each entry providing supported power
- source data object(PDO), the detailed bit definitions of PDO can be found
- in "Universal Serial Bus Power Delivery Specification" chapter 6.4.1.2
- Source_Capabilities Message, the order of each entry(PDO) should follow
- the PD spec chapter 6.4.1. Required for power source and power dual role.
- User can specify the source PDO array via PDO_FIXED/BATT/VAR/PPS_APDO()
- defined in dt-bindings/usb/pd.h.
- minItems: 1
- maxItems: 7
- $ref: /schemas/types.yaml#/definitions/uint32-array
-
- sink-pdos:
- description: An array of u32 with each entry providing supported power sink
- data object(PDO), the detailed bit definitions of PDO can be found in
- "Universal Serial Bus Power Delivery Specification" chapter 6.4.1.3
- Sink Capabilities Message, the order of each entry(PDO) should follow the
- PD spec chapter 6.4.1. Required for power sink and power dual role. User
- can specify the sink PDO array via PDO_FIXED/BATT/VAR/PPS_APDO() defined
- in dt-bindings/usb/pd.h.
- minItems: 1
- maxItems: 7
- $ref: /schemas/types.yaml#/definitions/uint32-array
-
sink-vdos:
description: An array of u32 with each entry, a Vendor Defined Message Object (VDO),
providing additional information corresponding to the product, the detailed bit
@@ -166,11 +144,6 @@ properties:
maxItems: 6
$ref: /schemas/types.yaml#/definitions/uint32-array
- op-sink-microwatt:
- description: Sink required operating power in microwatt, if source can't
- offer the power, Capability Mismatch is set. Required for power sink and
- power dual role.
-
port:
$ref: /schemas/graph.yaml#/properties/port
description: OF graph bindings modeling a data bus to the connector, e.g.
@@ -231,6 +204,21 @@ properties:
SNK_READY for non-pd link.
type: boolean
+ capabilities:
+ description: A child node to contain all the selectable USB Power Delivery capabilities.
+ type: object
+
+ patternProperties:
+ "^caps-[0-9]+$":
+ description: Child nodes under "capabilities" node. Each node contains a selectable USB
+ Power Delivery capability.
+ type: object
+ $ref: "#/$defs/capabilities"
+
+ unevaluatedProperties: false
+
+ additionalProperties: false
+
dependencies:
sink-vdos-v1: [ sink-vdos ]
sink-vdos: [ sink-vdos-v1 ]
@@ -238,6 +226,38 @@ dependencies:
required:
- compatible
+$defs:
+ capabilities:
+ properties:
+ source-pdos:
+ description: An array of u32 with each entry providing supported power
+ source data object(PDO), the detailed bit definitions of PDO can be found
+ in "Universal Serial Bus Power Delivery Specification" chapter 6.4.1.2
+ Source_Capabilities Message, the order of each entry(PDO) should follow
+ the PD spec chapter 6.4.1. Required for power source and power dual role.
+ User can specify the source PDO array via PDO_FIXED/BATT/VAR/PPS_APDO()
+ defined in dt-bindings/usb/pd.h.
+ minItems: 1
+ maxItems: 7
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+
+ sink-pdos:
+ description: An array of u32 with each entry providing supported power sink
+ data object(PDO), the detailed bit definitions of PDO can be found in
+ "Universal Serial Bus Power Delivery Specification" chapter 6.4.1.3
+ Sink Capabilities Message, the order of each entry(PDO) should follow the
+ PD spec chapter 6.4.1. Required for power sink and power dual role. User
+ can specify the sink PDO array via PDO_FIXED/BATT/VAR/PPS_APDO() defined
+ in dt-bindings/usb/pd.h.
+ minItems: 1
+ maxItems: 7
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+
+ op-sink-microwatt:
+ description: Sink required operating power in microwatt, if source can't
+ offer the power, Capability Mismatch is set. Required for power sink and
+ power dual role.
+
allOf:
- if:
properties:
--
2.43.0.rc2.451.g8631bc7472-goog
