https://bugzilla.kernel.org/show_bug.cgi?id=215740 --- Comment #20 from Ferry Toth (ferry.toth@xxxxxxxxxxxx) --- It's not a conflict or so, I am getting (using qgit or cli): git am --signoff /home/ferry/Downloads/dma-dbg.patch Patch format detection failed. when I add --patch-format=mbox I get: \Applying: @@ -, +, @@ fatal: empty ident name (for <>) not allowed Never had this before. I am testing on Intel Merrifield (Edison Arduino): root@yuna:~# lsusb -t /: Bus 02.Port 1: Dev 1, Class=root_hub, Driver=xhci-hcd/1p, 5000M /: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=xhci-hcd/1p, 480M |__ Port 1: Dev 2, If 0, Class=Hub, Driver=hub/7p, 480M |__ Port 1: Dev 3, If 0, Class=Human Interface Device, Driver=usbhid, 1.5M But root_hub 5000M is not available due to no phy. With Diagnostic to find DMA overlap attachment 305456 ------------[ cut here ]------------ DMA-API: dwc3 dwc3.0.auto: cacheline tracking EEXIST, overlapping mappings aren't supported WARNING: CPU: 0 PID: 105 at kernel/dma/debug.c:608 add_dma_entry+0x1fc/0x370 Modules linked in: rfcomm iptable_nat bnep snd_sof_nocodec spi_pxa2xx_platform dw_dmac brcmfmac_wcc pwm_lpss_pci pwm_lpss snd_sof_pci_intel_tng intel_mrfld_pwrbtn snd_sof_pci snd_sof_intel_atom intel_mrfld_adc snd_sof dw_dmac_pci snd_sof_utils snd_sof_xtensa_dsp dw_dmac_core snd_intel_dspcfg snd_soc_acpi spi_pxa2xx_pci brcmfmac brcmutil hci_uart leds_gpio btbcm ti_ads7950 tun ledtrig_timer ledtrig_heartbeat mmc_block extcon_intel_mrfld sdhci_pci cqhci sdhci led_class mmc_core intel_soc_pmic_mrfld btrfs libcrc32c xor zlib_deflate zstd_compress raid6_pq CPU: 0 PID: 105 Comm: kworker/0:3 Not tainted 6.6.0-edison-acpi-standard+ #1 Hardware name: Intel Corporation Merrifield/BODEGA BAY, BIOS 542 2015.01.21:18.19.48 Workqueue: usb_hub_wq hub_event RIP: 0010:add_dma_entry+0x1fc/0x370 Code: ff 0f 84 80 01 00 00 4c 8b 67 50 4d 85 e4 75 03 4c 8b 27 e8 e6 9d 6a 00 48 89 c6 4c 89 e2 48 c7 c7 10 21 5a b1 e8 94 a5 f5 ff <0f> 0b 48 85 db 74 1a 48 c7 c7 44 18 53 b1 e8 01 f9 fc ff 8b 73 4c RSP: 0000:ffffb63c403fbab0 EFLAGS: 00010286 RAX: 0000000000000000 RBX: ffff908001374f00 RCX: 0000000000000027 RDX: ffff90803e21c5c8 RSI: 0000000000000001 RDI: ffff90803e21c5c0 RBP: 000000000019d4b5 R08: ffffffffb19431e8 R09: 00000000ffffdfff R10: ffffffffb1863200 R11: ffffffffb1913200 R12: ffff908002124860 R13: 0000000000000001 R14: 0000000000000202 R15: 000000000019d4b5 FS: 0000000000000000(0000) GS:ffff90803e200000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fd58c003000 CR3: 0000000008096000 CR4: 00000000001006f0 Call Trace: <TASK> ? __warn+0x84/0x140 ? add_dma_entry+0x1fc/0x370 ? report_bug+0x199/0x1b0 ? handle_bug+0x3c/0x70 ? exc_invalid_op+0x18/0x70 ? asm_exc_invalid_op+0x1a/0x20 ? add_dma_entry+0x1fc/0x370 dma_map_page_attrs+0x10a/0x280 usb_hcd_map_urb_for_dma+0x46f/0x650 usb_hcd_submit_urb+0xa0/0xaa0 ? kick_hub_wq+0x69/0xf0 ? hub_activate+0x2c3/0x890 ? usb_disable_remote_wakeup+0x34/0x70 usb_start_wait_urb+0x65/0x100 usb_control_msg+0xe5/0x150 hub_ext_port_status+0x8a/0x1b0 hub_event+0x1d1/0x18e0 process_one_work+0x139/0x2f0 ? __pfx_worker_thread+0x10/0x10 worker_thread+0x2f4/0x400 ? __pfx_worker_thread+0x10/0x10 kthread+0xe6/0x120 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x34/0x50 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1b/0x30 </TASK> ---[ end trace 0000000000000000 ]--- DMA-API: Mapped at: debug_dma_map_page+0x6d/0x100 dma_map_page_attrs+0x10a/0x280 usb_hcd_map_urb_for_dma+0x46f/0x650 usb_hcd_submit_urb+0xa0/0xaa0 usb_start_wait_urb+0x65/0x100 DMA-API: Overlapped entry: 108342600 size 1 DMA-API: Mapped at: debug_dma_map_page+0x6d/0x100 dma_map_page_attrs+0x10a/0x280 usb_hcd_map_urb_for_dma+0x46f/0x650 usb_hcd_submit_urb+0xa0/0xaa0 hub_activate+0x29c/0x890 Map error: 108342608 108342608 len 4 Map error: 108342608 108342608 len 4 usb 1-1.1: new low-speed USB device number 3 using xhci-hcd Map error: 108342608 108342608 len 4 usb 1-1.1: New USB device found, idVendor=046d, idProduct=c03e, bcdDevice=20.00 usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 1-1.1: Product: USB-PS/2 Optical Mouse usb 1-1.1: Manufacturer: Logitech input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:11.0/dwc3.0.auto/xhci-hcd.1.auto/usb1/1-1/1-1.1/1-1.1:1.0/0003:046D:C03E.0001/input/input1 hid-generic 0003:046D:C03E.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-xhci-hcd.1.auto-1.1/input0 I also notice now on unplugging the mouse: Map error: 108342608 108342608 len 4 usb 1-1.1: USB disconnect, device number 3 Map error: 108342608 108342608 len 4 Map error: 108342608 108342608 len 4 Map error: 108342608 108342608 len 4 Map error: 108342608 108342608 len 4 Map error: 108342608 108342608 len 4 -- You may reply to this email to add a comment. You are receiving this mail because: You are watching the assignee of the bug.
