[PATCH 3/3] usb: misc: onboard_usb_hub: Add support for Cypress CY7C6563x

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Frieder Schrempf <frieder.schrempf@xxxxxxxxxx>

The Cypress CY7C6563x is a 2/4-port USB 2.0 hub. Add support for
this hub in the driver in order to bring up reset, supply or clock
dependencies.

There is no reset pulse width given in the datasheet so we expect
a minimal value of 1us to be enough. This hasn't been tested though
due to lack of hardware which has the reset connected to a GPIO.

Signed-off-by: Frieder Schrempf <frieder.schrempf@xxxxxxxxxx>
---
Changes in v2:
* none
---
 drivers/usb/misc/onboard_usb_hub.c | 1 +
 drivers/usb/misc/onboard_usb_hub.h | 6 ++++++
 2 files changed, 7 insertions(+)

diff --git a/drivers/usb/misc/onboard_usb_hub.c b/drivers/usb/misc/onboard_usb_hub.c
index 0d84b16deab50..0c0b698f008b9 100644
--- a/drivers/usb/misc/onboard_usb_hub.c
+++ b/drivers/usb/misc/onboard_usb_hub.c
@@ -441,6 +441,7 @@ static void onboard_hub_usbdev_disconnect(struct usb_device *udev)
 static const struct usb_device_id onboard_hub_id_table[] = {
 	{ USB_DEVICE(VENDOR_ID_CYPRESS, 0x6504) }, /* CYUSB33{0,1,2}x/CYUSB230x 3.0 */
 	{ USB_DEVICE(VENDOR_ID_CYPRESS, 0x6506) }, /* CYUSB33{0,1,2}x/CYUSB230x 2.0 */
+	{ USB_DEVICE(VENDOR_ID_CYPRESS, 0x6570) }, /* CY7C6563x 2.0 */
 	{ USB_DEVICE(VENDOR_ID_GENESYS, 0x0608) }, /* Genesys Logic GL850G USB 2.0 */
 	{ USB_DEVICE(VENDOR_ID_GENESYS, 0x0610) }, /* Genesys Logic GL852G USB 2.0 */
 	{ USB_DEVICE(VENDOR_ID_GENESYS, 0x0620) }, /* Genesys Logic GL3523 USB 3.1 */
diff --git a/drivers/usb/misc/onboard_usb_hub.h b/drivers/usb/misc/onboard_usb_hub.h
index c4e24a7b92904..67b2cc1e15e67 100644
--- a/drivers/usb/misc/onboard_usb_hub.h
+++ b/drivers/usb/misc/onboard_usb_hub.h
@@ -31,6 +31,11 @@ static const struct onboard_hub_pdata cypress_hx3_data = {
 	.num_supplies = 2,
 };
 
+static const struct onboard_hub_pdata cypress_hx2vl_data = {
+	.reset_us = 1,
+	.num_supplies = 1,
+};
+
 static const struct onboard_hub_pdata genesys_gl850g_data = {
 	.reset_us = 3,
 	.num_supplies = 1,
@@ -54,6 +59,7 @@ static const struct of_device_id onboard_hub_match[] = {
 	{ .compatible = "usb451,8142", .data = &ti_tusb8041_data, },
 	{ .compatible = "usb4b4,6504", .data = &cypress_hx3_data, },
 	{ .compatible = "usb4b4,6506", .data = &cypress_hx3_data, },
+	{ .compatible = "usb4b4,6570", .data = &cypress_hx2vl_data, },
 	{ .compatible = "usb5e3,608", .data = &genesys_gl850g_data, },
 	{ .compatible = "usb5e3,610", .data = &genesys_gl852g_data, },
 	{ .compatible = "usb5e3,620", .data = &genesys_gl852g_data, },
-- 
2.42.1





[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux