On Tue, Nov 21, 2023 at 08:38:48PM +0000, RD Babiera wrote: > Add TCPC_FAULT_STATUS_VCONN_OC constant and corresponding mask definition. > Maxim TCPC is capable of detecting VConn over current faults, so add > fault to alert mask. When a Vconn over current fault is triggered, put the > port in an error recovery state via tcpm_port_error_recovery. > > Signed-off-by: RD Babiera <rdbabiera@xxxxxxxxxx> Reviewed-by: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx> > --- > drivers/usb/typec/tcpm/tcpci_maxim_core.c | 20 +++++++++++++++++++- > include/linux/usb/tcpci.h | 5 ++++- > 2 files changed, 23 insertions(+), 2 deletions(-) > > diff --git a/drivers/usb/typec/tcpm/tcpci_maxim_core.c b/drivers/usb/typec/tcpm/tcpci_maxim_core.c > index 9454b12a073c..7fb966fd639b 100644 > --- a/drivers/usb/typec/tcpm/tcpci_maxim_core.c > +++ b/drivers/usb/typec/tcpm/tcpci_maxim_core.c > @@ -92,11 +92,16 @@ static void max_tcpci_init_regs(struct max_tcpci_chip *chip) > return; > } > > + /* Vconn Over Current Protection */ > + ret = max_tcpci_write8(chip, TCPC_FAULT_STATUS_MASK, TCPC_FAULT_STATUS_MASK_VCONN_OC); > + if (ret < 0) > + return; > + > alert_mask = TCPC_ALERT_TX_SUCCESS | TCPC_ALERT_TX_DISCARDED | TCPC_ALERT_TX_FAILED | > TCPC_ALERT_RX_HARD_RST | TCPC_ALERT_RX_STATUS | TCPC_ALERT_CC_STATUS | > TCPC_ALERT_VBUS_DISCNCT | TCPC_ALERT_RX_BUF_OVF | TCPC_ALERT_POWER_STATUS | > /* Enable Extended alert for detecting Fast Role Swap Signal */ > - TCPC_ALERT_EXTND | TCPC_ALERT_EXTENDED_STATUS; > + TCPC_ALERT_EXTND | TCPC_ALERT_EXTENDED_STATUS | TCPC_ALERT_FAULT; > > ret = max_tcpci_write16(chip, TCPC_ALERT_MASK, alert_mask); > if (ret < 0) { > @@ -295,6 +300,19 @@ static irqreturn_t _max_tcpci_irq(struct max_tcpci_chip *chip, u16 status) > } > } > > + if (status & TCPC_ALERT_FAULT) { > + ret = max_tcpci_read8(chip, TCPC_FAULT_STATUS, ®_status); > + if (ret < 0) > + return ret; > + > + ret = max_tcpci_write8(chip, TCPC_FAULT_STATUS, reg_status); > + if (ret < 0) > + return ret; > + > + if (reg_status & TCPC_FAULT_STATUS_VCONN_OC) > + tcpm_port_error_recovery(chip->port); > + } > + > if (status & TCPC_ALERT_EXTND) { > ret = max_tcpci_read8(chip, TCPC_ALERT_EXTENDED, ®_status); > if (ret < 0) > diff --git a/include/linux/usb/tcpci.h b/include/linux/usb/tcpci.h > index 83376473ac76..467e8045e9f8 100644 > --- a/include/linux/usb/tcpci.h > +++ b/include/linux/usb/tcpci.h > @@ -36,7 +36,9 @@ > > #define TCPC_ALERT_MASK 0x12 > #define TCPC_POWER_STATUS_MASK 0x14 > -#define TCPC_FAULT_STATUS_MASK 0x15 > + > +#define TCPC_FAULT_STATUS_MASK 0x15 > +#define TCPC_FAULT_STATUS_MASK_VCONN_OC BIT(1) > > #define TCPC_EXTENDED_STATUS_MASK 0x16 > #define TCPC_EXTENDED_STATUS_MASK_VSAFE0V BIT(0) > @@ -104,6 +106,7 @@ > > #define TCPC_FAULT_STATUS 0x1f > #define TCPC_FAULT_STATUS_ALL_REG_RST_TO_DEFAULT BIT(7) > +#define TCPC_FAULT_STATUS_VCONN_OC BIT(1) > > #define TCPC_ALERT_EXTENDED 0x21 > > -- > 2.43.0.rc1.413.gea7ed67945-goog -- heikki