[PATCH v5 1/2] dt-bindings: usb: Add the binding example for the Genesys Logic GL3523 hub

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Add the binding example for the USB3.1 Genesys Logic GL3523
integrates with USB 3.1 Gen 1 Super Speed and USB 2.0 High-Speed
hub.

For onboard hub controllers that support USB 3.x and USB 2.0 hubs
with shared resets and power supplies, this property is used to identify
the hubs with which these are shared.

[Conor Dooley: upgrade peer-hub description]
Signed-off-by: Anand Moon <linux.amoon@xxxxxxxxx>
---
v5: upgrade peer-hub description : Conor Dooley
[0] https://www.genesyslogic.com.tw/en/product_view.php?show=67 [Block Diagram]
v4: Fix the description of peer-hub and update the commit message.
Schematics of the Odroid N2+
https://dn.odroid.com/S922X/ODROID-N2/Schematic/odroid-n2_rev0.6_20210121.pdf
V3: fix the dt_binding_check error, added new example for Genesys GL3523
v2: added Genesys GL3523 binding
v1: none
---
 .../bindings/usb/genesys,gl850g.yaml          | 65 +++++++++++++++++--
 1 file changed, 61 insertions(+), 4 deletions(-)

diff --git a/Documentation/devicetree/bindings/usb/genesys,gl850g.yaml b/Documentation/devicetree/bindings/usb/genesys,gl850g.yaml
index ee08b9c3721f..499192ea4074 100644
--- a/Documentation/devicetree/bindings/usb/genesys,gl850g.yaml
+++ b/Documentation/devicetree/bindings/usb/genesys,gl850g.yaml
@@ -9,9 +9,6 @@ title: Genesys Logic USB hub controller
 maintainers:
   - Icenowy Zheng <uwu@xxxxxxxxxx>
 
-allOf:
-  - $ref: usb-device.yaml#
-
 properties:
   compatible:
     enum:
@@ -27,12 +24,46 @@ properties:
 
   vdd-supply:
     description:
-      the regulator that provides 3.3V core power to the hub.
+      phandle to the regulator that provides power to the hub.
+
+  peer-hub:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      For onboard hub controllers that support USB 3.x and USB 2.0 hubs
+      with shared resets and power supplies, this property is used to identify
+      the hubs with which these are shared.
 
 required:
   - compatible
   - reg
 
+allOf:
+  - $ref: usb-device.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - usb5e3,608
+    then:
+      properties:
+        peer-hub: false
+        vdd-supply: false
+        reset-gpios: true
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - usb5e3,610
+              - usb5e3,620
+    then:
+      properties:
+        peer-hub: true
+        vdd-supply: true
+        reset-gpios: true
+
 additionalProperties: false
 
 examples:
@@ -49,3 +80,29 @@ examples:
             reset-gpios = <&pio 7 2 GPIO_ACTIVE_LOW>;
         };
     };
+
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    usb {
+        dr_mode = "host";
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        /* 2.0 hub on port 1 */
+        hub_2_0: hub@1 {
+            compatible = "usb5e3,610";
+            reg = <1>;
+            peer-hub = <&hub_3_0>;
+            reset-gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
+            vdd-supply = <&vcc_5v>;
+        };
+
+        /* 3.1 hub on port 4 */
+        hub_3_0: hub@2 {
+            compatible = "usb5e3,620";
+            reg = <2>;
+            peer-hub = <&hub_2_0>;
+            reset-gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
+            vdd-supply = <&vcc_5v>;
+        };
+    };
-- 
2.42.0





[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux