[PATCH v2 0/6] Refine USB interrupt vectors on Qualcomm platforms

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Qualcomm targets define the following interrupts for usb wakeup:
{dp/dm}_hs_phy_irq, hs_phy_irq, pwr_event, ss_phy_irq.

But QUSB2 Phy based targets have another interrupt which gets triggered
in response to J/K states on dp/dm pads. Its functionality is replaced
by dp/dm interrupts on Femto/m31/eusb2 phy based targets for wakeup
purposes. Exceptions are some targets like SDM845/SDM670/SM6350 where
dp/dm irq's are used although they are qusb2 phy targets.

Currently in QUSB2 Phy based DT's, te qusb2_phy interrupt is named and
used as "hs_phy_irq" when in fact it is a different interrupt (used by
HW validation folks for debug purposes and not used on any downstream
target qusb/non-qusb).

On some non-QUSB2 targets (like sm8450/sm8550), the pwr_event IRQ was
named as hs_phy_irq and actual pwr_event_irq was skipped.

This series tries to address the discrepancies in the interrupt numbering
adding the missing interrupts and correcting the existing ones.

This series has been compared with downstream counter part and hw specifics
to ensure the numbering is right. Since there is not functionality change
the code has been only compile tested.

Changes in v2:
Removed additional compatibles added for different targets in v1.
Specified permuations of interrupts possible for QC targets and regrouped
interrupts for most of the DT's.

Rebased on top of wakeup interrupts fixes by Johan Hovold:
https://patchwork.kernel.org/project/linux-arm-msm/cover/20231120164331.8116-1-johan+linaro@xxxxxxxxxx/

Link to v1: (providing patchwork link since threading was broken in v1)
https://patchwork.kernel.org/project/linux-arm-msm/cover/20231122191259.3021-1-quic_kriskura@xxxxxxxxxxx/

Krishna Kurapati (6):
  dt-bindings: usb: dwc3: Clean up hs_phy_irq in bindings
  usb: dwc3: qcom: Rename hs_phy_irq to qusb2_phy_irq
  arm64: dts: qcom: Fix hs_phy_irq for QUSB2 targets
  arm64: dts: qcom: Fix hs_phy_irq for non-QUSB2 targets
  arm64: dts: qcom: Fix hs_phy_irq for SDM670/SDM845/SM6350
  arm64: dts: qcom: Add missing interrupts for qcs404/ipq5332

 .../devicetree/bindings/usb/qcom,dwc3.yaml    | 122 +++++-------------
 arch/arm/boot/dts/qcom/qcom-sdx55.dtsi        |  14 +-
 arch/arm/boot/dts/qcom/qcom-sdx65.dtsi        |  14 +-
 arch/arm64/boot/dts/qcom/ipq5332.dtsi         |   8 +-
 arch/arm64/boot/dts/qcom/ipq6018.dtsi         |  13 ++
 arch/arm64/boot/dts/qcom/ipq8074.dtsi         |  14 ++
 arch/arm64/boot/dts/qcom/msm8953.dtsi         |   7 +-
 arch/arm64/boot/dts/qcom/msm8996.dtsi         |  17 ++-
 arch/arm64/boot/dts/qcom/msm8998.dtsi         |   7 +-
 arch/arm64/boot/dts/qcom/qcs404.dtsi          |  16 +++
 arch/arm64/boot/dts/qcom/sa8775p.dtsi         |   6 +
 arch/arm64/boot/dts/qcom/sc7180.dtsi          |  14 +-
 arch/arm64/boot/dts/qcom/sc7280.dtsi          |  12 +-
 arch/arm64/boot/dts/qcom/sdm630.dtsi          |  17 ++-
 arch/arm64/boot/dts/qcom/sdm670.dtsi          |  14 +-
 arch/arm64/boot/dts/qcom/sdm845.dtsi          |  28 ++--
 arch/arm64/boot/dts/qcom/sm6115.dtsi          |   9 +-
 arch/arm64/boot/dts/qcom/sm6125.dtsi          |   9 ++
 arch/arm64/boot/dts/qcom/sm6350.dtsi          |  13 +-
 arch/arm64/boot/dts/qcom/sm6375.dtsi          |  12 +-
 arch/arm64/boot/dts/qcom/sm8150.dtsi          |  28 ++--
 arch/arm64/boot/dts/qcom/sm8250.dtsi          |  28 ++--
 arch/arm64/boot/dts/qcom/sm8350.dtsi          |  28 ++--
 arch/arm64/boot/dts/qcom/sm8450.dtsi          |  12 +-
 arch/arm64/boot/dts/qcom/sm8550.dtsi          |  12 +-
 drivers/usb/dwc3/dwc3-qcom.c                  |  22 ++--
 26 files changed, 293 insertions(+), 203 deletions(-)

-- 
2.42.0





[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux