Re: [PATCH 1/6] dt-bindings: usb: dwc3: Clean up hs_phy_irq in bindings

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 





On 11/23/2023 1:11 PM, Krzysztof Kozlowski wrote:
On 22/11/2023 20:13, Krishna Kurapati wrote:
The high speed related interrupts present on QC targets are as follows:

dp/dm Irq's
These IRQ's directly reflect changes on the DP/DM pads of the SoC. These
are used as wakeup interrupts only on SoCs with non-QUSBb2 targets with
exception of SDM670/SDM845/SM6350.

qusb2_phy irq
SoCs with QUSB2 PHY do not have separate DP/DM IRQs and expose only a
single IRQ whose behavior can be modified by the QUSB2PHY_INTR_CTRL
register. The required DPSE/DMSE configuration is done in
QUSB2PHY_INTR_CTRL register of phy address space.

hs_phy_irq
This is completely different from the above two and is present on all
targets with exception of a few IPQ ones. The interrupt is not enabled by
default and its functionality is mutually exclusive of qusb2_phy on QUSB
targets and DP/DM on femto phy targets.

The DTs of several QUSB2 PHY based SoCs incorrectly define "hs_phy_irq"
when they should have been "qusb2_phy_irq". On Femto phy targets, the
"hs_phy_irq" mentioned is either the actual "hs_phy_irq" or "pwr_event",
neither of which would never be triggered directly are non-functional
currently. The implementation tries to clean up this issue by addressing
the discrepencies involved and fixing the hs_phy_irq's in respective DT's.

Signed-off-by: Krishna Kurapati <quic_kriskura@xxxxxxxxxxx>
---
  .../devicetree/bindings/usb/qcom,dwc3.yaml    | 125 ++++++++++--------
  1 file changed, 69 insertions(+), 56 deletions(-)

diff --git a/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml b/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml
index e889158ca205..4a46346e2ead 100644
--- a/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml
+++ b/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml
@@ -17,20 +17,25 @@ properties:
            - qcom,ipq5018-dwc3
            - qcom,ipq5332-dwc3
            - qcom,ipq6018-dwc3
+          - qcom,ipq6018-dwc3-sec

I could not understand from commit msg why you are adding new compatible
and what it is supposed to fix.

The entire diff is huge thus difficult to review. Why fixing hs_phy_irq
causes three new interrupts being added?

Some targets have two controllers where the second one is only HS capable and doesn't have ss_phy_irq. In such cases to make it clear in bindings, I added a suffix "-sec" and accordingly changed in DT as well. Should've put this in commit text.

            - qcom,ipq8064-dwc3
            - qcom,ipq8074-dwc3
            - qcom,ipq9574-dwc3
            - qcom,msm8953-dwc3
            - qcom,msm8994-dwc3
            - qcom,msm8996-dwc3
+          - qcom,msm8996-dwc3-sec
            - qcom,msm8998-dwc3
            - qcom,qcm2290-dwc3
            - qcom,qcs404-dwc3
            - qcom,sa8775p-dwc3
+          - qcom,sa8775p-dwc3-ter

Ter?

Tertiary controller.

Regards,
Krishna,




[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux