The high speed related interrupts present on QC targets are as follows:
dp/dm Irq's
These IRQ's directly reflect changes on the DP/DM pads of the SoC. These
are used as wakeup interrupts only on SoCs with non-QUSBb2 targets with
exception of SDM670/SDM845/SM6350.
qusb2_phy irq
SoCs with QUSB2 PHY do not have separate DP/DM IRQs and expose only a
single IRQ whose behavior can be modified by the QUSB2PHY_INTR_CTRL
register. The required DPSE/DMSE configuration is done in
QUSB2PHY_INTR_CTRL register of phy address space.
hs_phy_irq
This is completely different from the above two and is present on all
targets with exception of a few IPQ ones. The interrupt is not enabled by
default and its functionality is mutually exclusive of qusb2_phy on QUSB
targets and DP/DM on femto phy targets.
The DTs of several QUSB2 PHY based SoCs incorrectly define "hs_phy_irq"
when they should have been "qusb2_phy_irq". On Femto phy targets, the
"hs_phy_irq" mentioned is either the actual "hs_phy_irq" or "pwr_event",
neither of which would never be triggered directly are non-functional
currently. The implementation tries to clean up this issue by addressing
the discrepencies involved and fixing the hs_phy_irq's in respective DT's.
Signed-off-by: Krishna Kurapati <quic_kriskura@xxxxxxxxxxx>
---
.../devicetree/bindings/usb/qcom,dwc3.yaml | 125 ++++++++++--------
1 file changed, 69 insertions(+), 56 deletions(-)
diff --git a/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml b/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml
index e889158ca205..4a46346e2ead 100644
--- a/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml
+++ b/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml
@@ -17,20 +17,25 @@ properties:
- qcom,ipq5018-dwc3
- qcom,ipq5332-dwc3
- qcom,ipq6018-dwc3
+ - qcom,ipq6018-dwc3-sec
- qcom,ipq8064-dwc3
- qcom,ipq8074-dwc3
- qcom,ipq9574-dwc3
- qcom,msm8953-dwc3
- qcom,msm8994-dwc3
- qcom,msm8996-dwc3
+ - qcom,msm8996-dwc3-sec
- qcom,msm8998-dwc3
- qcom,qcm2290-dwc3
- qcom,qcs404-dwc3
- qcom,sa8775p-dwc3
+ - qcom,sa8775p-dwc3-ter
- qcom,sc7180-dwc3
- qcom,sc7280-dwc3
+ - qcom,sc7280-dwc3-sec
- qcom,sc8280xp-dwc3
- qcom,sdm660-dwc3
+ - qcom,sdm660-dwc3-sec
- qcom,sdm670-dwc3
- qcom,sdm845-dwc3
- qcom,sdx55-dwc3
@@ -98,11 +103,11 @@ properties:
interrupts:
minItems: 1
- maxItems: 4
+ maxItems: 5
interrupt-names:
minItems: 1
- maxItems: 4
+ maxItems: 5
qcom,select-utmi-as-pipe-clk:
description:
@@ -175,10 +180,13 @@ allOf:
- qcom,ipq9574-dwc3
- qcom,msm8953-dwc3
- qcom,msm8996-dwc3
+ - qcom,msm8996-dwc3-sec
- qcom,msm8998-dwc3
- qcom,sa8775p-dwc3
+ - qcom,sa8775p-dwc3-ter
- qcom,sc7180-dwc3
- qcom,sc7280-dwc3
+ - qcom,sc7280-dwc3-sec
- qcom,sdm670-dwc3
- qcom,sdm845-dwc3
- qcom,sdx55-dwc3
@@ -203,6 +211,7 @@ allOf:
contains:
enum:
- qcom,ipq6018-dwc3
+ - qcom,ipq6018-dwc3-sec
then:
properties:
clocks:
@@ -285,6 +294,7 @@ allOf:
contains:
enum:
- qcom,sdm660-dwc3
+ - qcom,sdm660-dwc3-sec
then:
properties:
clocks:
@@ -357,20 +367,15 @@ allOf:
compatible:
contains:
enum:
- - qcom,ipq4019-dwc3
- - qcom,ipq6018-dwc3
- - qcom,ipq8064-dwc3
- - qcom,ipq8074-dwc3
- - qcom,msm8994-dwc3
- - qcom,qcs404-dwc3
+ - qcom,sc8280xp-dwc3
+ - qcom,sa8775p-dwc3
- qcom,sc7180-dwc3
+ - qcom,sc7280-dwc3
- qcom,sdm670-dwc3
- qcom,sdm845-dwc3
- qcom,sdx55-dwc3
- qcom,sdx65-dwc3
- qcom,sdx75-dwc3
- - qcom,sm4250-dwc3
- - qcom,sm6125-dwc3
- qcom,sm6350-dwc3
- qcom,sm8150-dwc3
- qcom,sm8250-dwc3
@@ -381,16 +386,37 @@ allOf:
properties:
interrupts:
items:
+ - description: Wakeup event on DM line.
+ - description: Wakeup event on DP line.
- description: The interrupt that is asserted
- when a wakeup event is received on USB2 bus.
+ based on linestates. Is enabled if qscratch
+ registers are configured appropirately. This
+ interrupt functionality is mutually exclusive
+ to that of {dp/d}_hs_phy_irq)
+ - description: Wakeup based on power events.
- description: The interrupt that is asserted
when a wakeup event is received on USB3 bus.
- - description: Wakeup event on DM line.
- - description: Wakeup event on DP line.
interrupt-names:
items:
+ - const: dm_hs_phy_irq
+ - const: dp_hs_phy_irq
- const: hs_phy_irq
+ - const: pwr_event
- const: ss_phy_irq
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - qcom,sc7280-dwc3-sec
+ - qcom,sa8775p-ter
+ then:
+ properties:
+ interrupt-names:
+ items:
+ - const: pwr_event
+ - const: hs_phy_irq
- const: dm_hs_phy_irq
- const: dp_hs_phy_irq
@@ -399,36 +425,29 @@ allOf:
compatible:
contains:
enum:
- - qcom,msm8953-dwc3
- - qcom,msm8996-dwc3
- - qcom,msm8998-dwc3
- - qcom,sm6115-dwc3
+ - qcom,ipq6018-dwc3-sec
then:
properties:
- interrupts:
- maxItems: 2
interrupt-names:
items:
- - const: hs_phy_irq
- - const: ss_phy_irq
+ - const: pwr_event
+ - const: qusb2_phy
- if:
properties:
compatible:
contains:
enum:
- - qcom,ipq5018-dwc3
- - qcom,ipq5332-dwc3
- - qcom,sdm660-dwc3
+ - qcom,ipq6018-dwc3
+ - qcom,ipq8074-dwc3
+ - qcom,msm8953-dwc3
+ - qcom,msm8998-dwc3
then:
properties:
- interrupts:
- minItems: 1
- maxItems: 2
interrupt-names:
- minItems: 1
items:
- - const: hs_phy_irq
+ - const: pwr_event
+ - const: qusb2_phy
- const: ss_phy_irq
- if:
@@ -436,55 +455,48 @@ allOf:
compatible:
contains:
enum:
- - qcom,sc7280-dwc3
+ - qcom,msm8996-dwc3
+ - qcom,sdm660-dwc3
+ - qcom,sm4250-dwc3
+ - qcom,sm6115-dwc3
+ - qcom,sm6125-dwc3
then:
properties:
- interrupts:
- minItems: 3
- maxItems: 4
interrupt-names:
- minItems: 3
items:
- const: hs_phy_irq
- - const: dp_hs_phy_irq
- - const: dm_hs_phy_irq
+ - const: pwr_event
+ - const: qusb2_phy
- const: ss_phy_irq
-
- if:
properties:
compatible:
contains:
enum:
- - qcom,sc8280xp-dwc3
+ - qcom,sdm660-dwc3-sec
+ - qcom,msm8996-dwc3-sec
+ - qcom,qcs404-dwc3
then:
properties:
- interrupts:
- maxItems: 4
interrupt-names:
items:
+ - const: hs_phy_irq
- const: pwr_event
- - const: dp_hs_phy_irq
- - const: dm_hs_phy_irq
- - const: ss_phy_irq
+ - const: qusb2_phy
- if:
properties:
compatible:
contains:
enum:
- - qcom,sa8775p-dwc3
+ - qcom,ipq5332-dwc3
then:
properties:
- interrupts:
- minItems: 3
- maxItems: 4
interrupt-names:
- minItems: 3
items:
- - const: pwr_event
- const: dp_hs_phy_irq
- const: dm_hs_phy_irq
- - const: ss_phy_irq
+ - const: pwr_event
additionalProperties: false
@@ -519,12 +531,13 @@ examples:
<&gcc GCC_USB30_PRIM_MASTER_CLK>;
assigned-clock-rates = <19200000>, <150000000>;
- interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 486 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 488 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 489 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "hs_phy_irq", "ss_phy_irq",
- "dm_hs_phy_irq", "dp_hs_phy_irq";
+ interrupts = <GIC_SPI 488 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 489 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 486 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "dm_hs_phy_irq", "dp_hs_phy_irq",
+ "hs_phy_irq", "pwr_event", "ss_phy_irq";
power-domains = <&gcc USB30_PRIM_GDSC>;
--
2.42.0
