Re: [REGRESSION] USB ports do not work after suspend/resume cycle with v6.6.2

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, Nov 24, 2023 at 01:59:24PM +0100, Vlastimil Babka wrote:
> +Cc workflows
> 
> On 11/24/23 12:43, Greg Kroah-Hartman wrote:
> > On Thu, Nov 23, 2023 at 07:20:46PM +0100, Oleksandr Natalenko wrote:
> >> Hello.
> >> 
> >> Since v6.6.2 kernel release I'm experiencing a regression with regard
> >> to USB ports behaviour after a suspend/resume cycle.
> >> 
> >> If a USB port is empty before suspending, after resuming the machine
> >> the port doesn't work. After a device insertion there's no reaction in
> >> the kernel log whatsoever, although I do see that the device gets
> >> powered up physically. If the machine is suspended with a device
> >> inserted into the USB port, the port works fine after resume.
> >> 
> >> This is an AMD-based machine with hci version 0x110 reported. As per
> >> the changelog between v6.6.1 and v6.6.2, 603 commits were backported
> >> into v6.6.2, and one of the commits was as follows:
> >> 
> >> $ git log --oneline v6.6.1..v6.6.2 -- drivers/usb/host/xhci-pci.c 
> >> 14a51fa544225 xhci: Loosen RPM as default policy to cover for AMD xHC
> >> 1.1
> >> 
> >> It seems that this commit explicitly enables runtime PM specifically
> >> for my platform. As per dmesg:
> >> 
> >> v6.6.1: quirks 0x0000000000000410 v6.6.2: quirks 0x0000000200000410
> >> 
> >> Here, bit 33 gets set, which, as expected, corresponds to:
> >> 
> >> drivers/usb/host/xhci.h 1895:#define XHCI_DEFAULT_PM_RUNTIME_ALLOW
> >> BIT_ULL(33)
> >> 
> >> This commit is backported from the upstream commit 4baf12181509, which
> >> is one of 16 commits of the following series named "xhci features":
> >> 
> >> https://lore.kernel.org/all/20231019102924.2797346-1-mathias.nyman@xxxxxxxxxxxxxxx/
> >>
> >>  It appears that there was another commit in this series, also from
> >> Basavaraj (in Cc), a5d6264b638e, which was not picked for v6.6.2, but
> >> which stated the following:
> >> 
> >> Use the low-power states of the underlying platform to enable runtime
> >> PM. If the platform doesn't support runtime D3, then enabling default
> >> RPM will result in the controller malfunctioning, as in the case of
> >> hotplug devices not being detected because of a failed interrupt
> >> generation.
> >> 
> >> It felt like this was exactly my case. So, I've conducted two tests:
> >> 
> >> 1. Reverted 14a51fa544225 from v6.6.2. With this revert the USB ports
> >> started to work fine, just as they did in v6.6.1. 2. Left 14a51fa544225
> >> in place, but also applied upstream a5d6264b638e on top of v6.6.2. With
> >> this patch added the USB ports also work after a suspend/resume cycle.
> >> 
> >> This runtime PM enablement did also impact my AX200 Bluetooth device,
> >> resulting in long delays before headphones/speaker can connect, but
> >> I've solved this with btusb.enable_autosuspend=N. I think this has
> >> nothing to do with the original issue, and I'm OK with this workaround
> >> unless someone has got a different idea.
> >> 
> >> With that, please consider either reverting 14a51fa544225 from the
> >> stable kernel, or applying a5d6264b638e in addition to it. Given the
> >> mainline kernel has got both of them, I'm in favour of applying
> >> additional commit to the stable kernel.
> > 
> > I've applied this other commit as well to all of the affected branches, 
> > thanks for letting us know.
> > 
> >> I'm also Cc'ing all the people from our Mastodon discussion where I
> >> initially complained about the issue as well as about stable kernel
> >> branch stability:
> >> 
> >> https://activitypub.natalenko.name/@oleksandr/statuses/01HFRXBYWMXF9G4KYPE3XHH0S8
> >>
> >>  I'm not going to expand more on that in this email, especially given
> >> Greg indicated he read the conversation, but I'm open to continuing
> >> this discussion as I still think that current workflow brings visible
> >> issues to ordinary users, and hence some adjustments should be made.
> > 
> > What type of adjustments exactly?  Testing on wide ranges of systems is
> > pretty hard, and this patch explicitly was set to be backported when it
> > hit Linus's tree,
> 
> Are you sure about that "explicitly was set to be backported" part?
> According to Documentation/process/stable-kernel-rules.rst:
> 
> > There are three options to submit a change to -stable trees:
> > 
> >  1. Add a 'stable tag' to the description of a patch you then submit for
> >     mainline inclusion.
> >  2. Ask the stable team to pick up a patch already mainlined.
> >  3. Submit a patch to the stable team that is equivalent to a change already
> >     mainlined.
> 
> I don't see a stable tag in 4baf12181509 ("xhci: Loosen RPM as default
> policy to cover for AMD xHC 1.1"), was it option 2 or 3 then?
> 
> Do you mean the Fixes: tag? the docs only say that can replace the "# 3.3.x"
> part to determine where backporting should stop, but is not itself an
> explicit marking for stable backport?

No, I mean the "The subsystem maintainer knew this needed to be added to
the stable trees so they told the stable maintainer to do so."  Now the
fact that I am both people at once, and did so in my own head instead of
writing myself a public email, might not have made this all that obvious :)

thanks,

gre gk-h




[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux