Linux SPI

• Thread Index

• [PATCH 3/3] spi: fsl-espi: add runtime PM
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• [PATCH 2/3] spi: fsl-(e)spi: simplify cleanup code
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• [PATCH 1/3] spi: fsl-(e)spi: migrate to using devm_ functions to simplify cleanup
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• [PATCH 0/3] spi: fsl-(e)spi: Migrate to devm_ functions and add runtime PM
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• Re: [PATCH 4/4 RESEND v2] spi: s3c64xx: replace clock disabling with runtime PM suspend call in remove function
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [PATCH 2/4 RESEND v2] spi: s3c64xx: extend driver to make full use of runtime PM autosuspend
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• [PATCH 3/4 RESEND v2] spi: s3c64xx: simplify suspend / resume handlers
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• [PATCH 1/4 RESEND v2] spi: s3c64xx: clean up runtime PM if driver registration fails
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• [PATCH 4/4 RESEND v2] spi: s3c64xx: replace clock disabling with runtime PM suspend call in remove function
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• [PATCH 2/4 RESEND v2] spi: s3c64xx: extend driver to make full use of runtime PM autosuspend
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• Re: [PATCH 18/18] spi: (RFC, don't apply) report OF style modalias when probing using DT
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: dw: Allow interface drivers to limit data I/O to word sizes" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "dt: snps,dw-apb-ssi: Document new I/O data register width property" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: Fall back to master maximum speed if no slave speed specified" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• [PATCH] spi: Fall back to master maximum speed if no slave speed specified
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [alsa-devel] Fwd: [PATCH 1/1] SPI : spi-pxa2xx : fix spi init of WM510205 codec via ACPI (resend)
  • From: Christian Hartmann <cornogle@xxxxxxxxxxxxxx>
• Re: [alsa-devel] Fwd: [PATCH 1/1] SPI : spi-pxa2xx : fix spi init of WM510205 codec via ACPI (resend)
  • From: Christian Hartmann <cornogle@xxxxxxxxxxxxxx>
• Re: Applied "spi: sunxi: fix transfer timeout" to the spi tree
  • From: Michal Suchanek <hramrach@xxxxxxxxx>
• Re: [alsa-devel] Fwd: [PATCH 1/1] SPI : spi-pxa2xx : fix spi init of WM510205 codec via ACPI (resend)
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• Re: [alsa-devel] Fwd: [PATCH 1/1] SPI : spi-pxa2xx : fix spi init of WM510205 codec via ACPI (resend)
  • From: Christian Hartmann <cornogle@xxxxxxxxxxxxxx>
• Re: [PATCH 4/4 RESEND] spi: s3c64xx: replace clock disabling with runtime PM suspend call in remove function
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [PATCH 3/4 RESEND] spi: s3c64xx: simplify suspend / resume handlers
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [PATCH 2/4 RESEND] spi: s3c64xx: extend driver to make full use of runtime PM autosuspend
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [PATCH 1/4 RESEND] spi: s3c64xx: clean up runtime PM if driver registration fails
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [PATCH 18/18] spi: (RFC, don't apply) report OF style modalias when probing using DT
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• Re: [PATCH 18/18] spi: (RFC, don't apply) report OF style modalias when probing using DT
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: Applied "spi: sunxi: fix transfer timeout" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v3] nand: Add NAND driver for Mikrotik RB4xx series boards
  • From: Brian Norris <computersforpeace@xxxxxxxxx>
• Re: [PATCH 00/18] Export SPI and OF module aliases in missing drivers
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• Re: [PATCH 18/18] spi: (RFC, don't apply) report OF style modalias when probing using DT
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• Re: [PATCH 1/9] spi: sunxi: fix transfer timeout
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH 3/9] spi: sunxi: check that transfer speed is non-zero
  • From: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/9] spi: sunxi: fix transfer timeout
  • From: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH 00/18] Export SPI and OF module aliases in missing drivers
  • From: Brian Norris <computersforpeace@xxxxxxxxx>
• Re: [PATCH 1/9] spi: sunxi: fix transfer timeout
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH 18/18] spi: (RFC, don't apply) report OF style modalias when probing using DT
  • From: Brian Norris <computersforpeace@xxxxxxxxx>
• Applied "spi: sunxi: fix transfer timeout" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• [PATCH 4/4 RESEND] spi: s3c64xx: replace clock disabling with runtime PM suspend call in remove function
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• [PATCH 3/4 RESEND] spi: s3c64xx: simplify suspend / resume handlers
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• [PATCH 2/4 RESEND] spi: s3c64xx: extend driver to make full use of runtime PM autosuspend
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• [PATCH 1/4 RESEND] spi: s3c64xx: clean up runtime PM if driver registration fails
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• Re: [PATCH 3/9] spi: sunxi: check that transfer speed is non-zero
  • From: Michal Suchanek <hramrach@xxxxxxxxx>
• Re: [PATCH 1/9] spi: sunxi: fix transfer timeout
  • From: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH 4/9] spi: sun4i: add DMA support
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH 4/9] spi: sun4i: add DMA support
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH 3/9] spi: sunxi: check that transfer speed is non-zero
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH 1/9] spi: sunxi: fix transfer timeout
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH 18/18] spi: (RFC, don't apply) report OF style modalias when probing using DT
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: ti-qspi: use 128 bit transfer mode where possible" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: mediatek: fix spi incorrect endian usage" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: mediatek: use BIT() to instead of SPI_CMD_*_OFFSET" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: medaitek: revise quirks compatibility style" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v2 4/4] spi: mediatek: revise coding style
  • From: Mark Brown <broonie@xxxxxxxxxx>
• [PATCH] spi: bcm53xx: Adjust devm usage
  • From: Vaishali Thakkar <vthakkar1994@xxxxxxxxx>
• Re: [PATCH] spi: ti-qspi: use 128 bit transfer mode for writing to flash
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH 7/9] ARM: dts: sun5i: add SPI pins on A13 and A10s
  • From: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH 5/9] ARM: dts: sun7i: cubieboard2: Enable SPI0
  • From: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH 4/9] spi: sun4i: add DMA support
  • From: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/9] spi: sun4i: fix FIFO limit
  • From: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH 3/9] spi: sunxi: check that transfer speed is non-zero
  • From: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/9] spi: sunxi: fix transfer timeout
  • From: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
• Re: [linux-sunxi] [PATCH 4/9] spi: sun4i: add DMA support
  • From: Michal Suchanek <hramrach@xxxxxxxxx>
• Re: [alsa-devel] Fwd: [PATCH 1/1] SPI : spi-pxa2xx : fix spi init of WM510205 codec via ACPI (resend)
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• Re: [alsa-devel] Fwd: [PATCH 1/1] SPI : spi-pxa2xx : fix spi init of WM510205 codec via ACPI (resend)
  • From: Christian Hartmann <cornogle@xxxxxxxxxxxxxx>
• Re: [alsa-devel] Fwd: [PATCH 1/1] SPI : spi-pxa2xx : fix spi init of WM510205 codec via ACPI (resend)
  • From: Christian Hartmann <cornogle@xxxxxxxxxxxxxx>
• [PATCH] spi: ti-qspi: use 128 bit transfer mode for writing to flash
  • From: Vignesh R <vigneshr@xxxxxx>
• Re: [alsa-devel] Fwd: [PATCH 1/1] SPI : spi-pxa2xx : fix spi init of WM510205 codec via ACPI (resend)
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• Re: [alsa-devel] Fwd: [PATCH 1/1] SPI : spi-pxa2xx : fix spi init of WM510205 codec via ACPI (resend)
  • From: Christian Hartmann <cornogle@xxxxxxxxxxxxxx>
• [PATCH v2 2/4] spi: medaitek: revise quirks compatibility style
  • From: Leilk Liu <leilk.liu@xxxxxxxxxxxx>
• [PATCH v2 3/4] spi: mediatek: use BIT() to instead of SPI_CMD_*_OFFSET
  • From: Leilk Liu <leilk.liu@xxxxxxxxxxxx>
• [PATCH v2 4/4] spi: mediatek: revise coding style
  • From: Leilk Liu <leilk.liu@xxxxxxxxxxxx>
• [PATCH v2 1/4] spi: mediatek: fix spi incorrect endian usage
  • From: Leilk Liu <leilk.liu@xxxxxxxxxxxx>
• [PATCH v2 0/4] Fixup mediatek spi driver
  • From: Leilk Liu <leilk.liu@xxxxxxxxxxxx>
• [PATCH 18/18] spi: (RFC, don't apply) report OF style modalias when probing using DT
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• [PATCH 00/18] Export SPI and OF module aliases in missing drivers
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• Re: [PATCH 2/3] spi: s3c64xx: extend driver to make full use of runtime PM autosuspend
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• Re: [PATCH 2/3] spi: s3c64xx: fix runtime PM handling
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• Re: [PATCH 2/3] spi: s3c64xx: extend driver to make full use of runtime PM autosuspend
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [PATCH 2/3] spi: s3c64xx: fix runtime PM handling
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• [PATCH 1/3] spi: s3c64xx: fix runtime PM handling if registering the driver fails
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• [PATCH 3/3] spi: s3c64xx: simplify suspend / resume handlers
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• [PATCH 2/3] spi: s3c64xx: extend driver to make full use of runtime PM autosuspend
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• Re: [PATCH 2/3] spi: s3c64xx: fix runtime PM handling
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• Re: [PATCH 2/2] spi: Add DT bindings documentation for Netlogic XLP SPI controller
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH 1/3] spi: mediatek: revise coding style
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH 1/2] spi/xlp: SPI controller driver for Netlogic XLP SoCs
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: mediatek: remove redundant clock in prepare_hardware/unprepare_hardware" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH 3/3] spi: mediatek: fix spi incorrect endian usage
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [alsa-devel] Fwd: [PATCH 1/1] SPI : spi-pxa2xx : fix spi init of WM510205 codec via ACPI (resend)
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• Re: [alsa-devel] Fwd: [PATCH 1/1] SPI : spi-pxa2xx : fix spi init of WM510205 codec via ACPI (resend)
  • From: Christian Hartmann <cornogle@xxxxxxxxxxxxxx>
• Re: [PATCH v3 2/2] spi: dw: Allow interface drivers to limit data I/O to word sizes
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH 3/3] spi: s3c64xx: simplify suspend/resume handlers
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• Re: [PATCH 2/3] spi: s3c64xx: fix runtime PM handling
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• Re: [PATCH 1/3] spi: s3c64xx: simplify probe function by using local variable for &pdev->dev
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• [PATCH 2/2] spi: Add DT bindings documentation for Netlogic XLP SPI controller
  • From: <kamlakant.patel@xxxxxxxxxxxx>
• [PATCH 1/2] spi/xlp: SPI controller driver for Netlogic XLP SoCs
  • From: <kamlakant.patel@xxxxxxxxxxxx>
• [PATCH 0/2] SPI controller driver for Netlogic XLP SoCs
  • From: <kamlakant.patel@xxxxxxxxxxxx>
• [PATCH 2/3] spi: mediatek: remove redundant clock in prepare_hardware/unprepare_hardware
  • From: Leilk Liu <leilk.liu@xxxxxxxxxxxx>
• [PATCH 3/3] spi: mediatek: fix spi incorrect endian usage
  • From: Leilk Liu <leilk.liu@xxxxxxxxxxxx>
• [PATCH 0/3] Fixup mediatek spi driver
  • From: Leilk Liu <leilk.liu@xxxxxxxxxxxx>
• [PATCH 1/3] spi: mediatek: revise coding style
  • From: Leilk Liu <leilk.liu@xxxxxxxxxxxx>
• Re: [PATCH 3/3] spi: s3c64xx: simplify suspend/resume handlers
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [PATCH 2/3] spi: s3c64xx: fix runtime PM handling
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [PATCH 1/3] spi: s3c64xx: simplify probe function by using local variable for &pdev->dev
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• [PATCH 3/3] spi: s3c64xx: simplify suspend/resume handlers
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• [PATCH 2/3] spi: s3c64xx: fix runtime PM handling
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• [PATCH 1/3] spi: s3c64xx: simplify probe function by using local variable for &pdev->dev
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• [PATCH 0/3] spi: s3c64xx: Patch set to fix and simplify the s3c64xx driver
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• Re: [PATCH 0/2] Fix displays requiring 9 bit transfers on RPi
  • From: Brüns, Stefan <Stefan.Bruens@xxxxxxxxxxxxxx>
• [PATCH v3 2/2] spi: dw: Allow interface drivers to limit data I/O to word sizes
  • From: Michael van der Westhuizen <michael@xxxxxxxxxxxxxxxx>
• [PATCH v3 1/2] dt: snps,dw-apb-ssi: Document new I/O data register width property
  • From: Michael van der Westhuizen <michael@xxxxxxxxxxxxxxxx>
• [PATCH v3 0/2] spi: dw: Reintroduce optional 16 bit data register I/O
  • From: Michael van der Westhuizen <michael@xxxxxxxxxxxxxxxx>
• Re: [PATCH] spi: mediatek: fix spi incorrect endian usage and remove redundant clock
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH] spi: mediatek: fix spi incorrect endian usage and remove redundant clock
  • From: lei liu <leilk.liu@xxxxxxxxxxxx>
• Re: [PATCH] spi: mediatek: fix spi incorrect endian usage and remove redundant clock
  • From: Jonas Gorski <jogo@xxxxxxxxxxx>
• [PATCH] spi: mediatek: fix spi incorrect endian usage and remove redundant clock
  • From: Leilk Liu <leilk.liu@xxxxxxxxxxxx>
• Re: [RESEND PATCH v2 2/2] spi: dw: Allow interface drivers to limit data I/O to word sizes
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v2 0/2] spi: dw: Reintroduce optional 16 bit data register I/O
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• [PATCH v2] spi: bitbang: Replace spinlock by mutex
  • From: Nicolas Boichat <drinkcat@xxxxxxxxxxxx>
• Re: [PATCH] spi: Mediatek: fix endian warnings
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH] spi: Mediatek: fix endian warnings
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: [PATCH] spi: Mediatek: fixup cpu_to_le32 incorrect usage
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [PATCH] spi: Mediatek: fix endian warnings
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [PATCH] spi: Mediatek: fix endian warnings
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [PATCH 0/2] Fix displays requiring 9 bit transfers on RPi
  • From: Stefan Bruens <stefan.bruens@xxxxxxxxxxxxxx>
• Applied "spi: bcm2835: set up spi-mode before asserting cs-gpio" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi/spi-xilinx: Fix spurious IRQ ACK on irq mode" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: sh-msiof: Fix FIFO size to 64 word from 256 word" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "ARM: davinci: Set proper SPI prescale limit value" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH] spi: zynqmp-gqspi: Remove executable permission
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH] spi: imx: fix ecspi mode setup
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH 1/3] spi: bitbang: Replace spinlock by mutex when calling chipselect
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [alsa-devel] Fwd: [PATCH 1/1] SPI : spi-pxa2xx : fix spi init of WM510205 codec via ACPI (resend)
  • From: Christian Hartmann <cornogle@xxxxxxxxxxxxxx>
• Applied "spi: bcm2835: fix overflow in calculation of transfer time" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: bcm2835: set up spi-mode before asserting cs-gpio" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: s3c64xx: print fifo size on probe." to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi/spi-xilinx: Fix mixed poll/irq mode" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: Mediatek: fixup cpu_to_le32 incorrect usage" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• [PATCH] spi/spi-xilinx: Fix spurious IRQ ACK on irq mode
  • From: Ricardo Ribalda Delgado <ricardo.ribalda@xxxxxxxxx>
• [PATCH] spi: Mediatek: fixup cpu_to_le32 incorrect usage
  • From: Leilk Liu <leilk.liu@xxxxxxxxxxxx>
• Re: [PATCH] spi: Mediatek: fix endian warnings
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [v5,2/3] spi: mediatek: Add spi bus for Mediatek MT8173
  • From: lei liu <leilk.liu@xxxxxxxxxxxx>
• Re: [PATCH v5 3/3] arm64: dts: Add spi bus dts
  • From: lei liu <leilk.liu@xxxxxxxxxxxx>
• Re: [PATCH] spi: Mediatek: fix endian warnings
  • From: lei liu <leilk.liu@xxxxxxxxxxxx>
• [PATCH] spi/spi-xilinx: Fix mixed poll/irq mode
  • From: Ricardo Ribalda Delgado <ricardo.ribalda@xxxxxxxxx>
• Re: [PATCH] spi: Mediatek: fix endian warnings
  • From: Jonas Gorski <jogo@xxxxxxxxxxx>
• Re: [RFC PATCH 1/5] spi: introduce flag for memory mapped read
  • From: Vignesh R <vigneshr@xxxxxx>
• Applied "spi: mt65xx: Fix module alias" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: orion: On a38x, implement "50MHZ SPI AC timing" Erratum No. FE-9144572" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: atmel: remove useless include" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: mediatek: fix endian warnings" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v5 3/3] arm64: dts: Add spi bus dts
  • From: Daniel Kurtz <djkurtz@xxxxxxxxxxxx>
• Re: [v5,2/3] spi: mediatek: Add spi bus for Mediatek MT8173
  • From: Nicolas Boichat <drinkcat@xxxxxxxxxxxx>
• [PATCH] spi: Mediatek: fix endian warnings
  • From: Leilk Liu <leilk.liu@xxxxxxxxxxxx>
• [PATCH] spi: orion: On a38x, implement "50MHZ SPI AC timing" Erratum No. FE-9144572
  • From: Gregory CLEMENT <gregory.clement@xxxxxxxxxxxxxxxxxx>
• Re: [RESEND][PATCH 3/4] ARM: davinci: Set proper SPI prescale limit value
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [RESEND][PATCH 3/4] ARM: davinci: Set proper SPI prescale limit value
  • From: Sekhar Nori <nsekhar@xxxxxx>
• Re: [spi:topic/mtk 2/2] drivers/spi/spi-mt65xx.c:362:24: sparse: incorrect type in argument 1 (different base types)
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [RESEND][PATCH 3/4] ARM: davinci: Set proper SPI prescale limit value
  • From: Mark Brown <broonie@xxxxxxxxxx>
• [PATCH 0/2] Fix displays requiring 9 bit transfers on RPi
  • From: Stefan Brüns <stefan.bruens@xxxxxxxxxxxxxx>
• [PATCH 2/2] staging/fbtft: use spi_setup instead of direct call to master->setup
  • From: Stefan Brüns <stefan.bruens@xxxxxxxxxxxxxx>
• [PATCH 1/2] spi: check bits_per_word in spi_setup
  • From: Stefan Brüns <stefan.bruens@xxxxxxxxxxxxxx>
• Re: [RESEND][PATCH 3/4] ARM: davinci: Set proper SPI prescale limit value
  • From: Sekhar Nori <nsekhar@xxxxxx>
• Re: [spi:topic/mtk 2/2] drivers/spi/spi-mt65xx.c:362:24: sparse: incorrect type in argument 1 (different base types)
  • From: lei liu <leilk.liu@xxxxxxxxxxxx>
• [PATCH] spi: mt65xx: Fix module alias
  • From: Axel Lin <axel.lin@xxxxxxxxxx>
• Re: [RESEND][PATCH 3/4] ARM: davinci: Set proper SPI prescale limit value
  • From: "Franklin S Cooper Jr." <fcooper@xxxxxx>
• [PATCH] spi: atmel: remove useless include
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxxxxxxxxx>
• Re: [alsa-devel] Fwd: [PATCH 1/1] SPI : spi-pxa2xx : fix spi init of WM510205 codec via ACPI (resend)
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• Re: [alsa-devel] Fwd: [PATCH 1/1] SPI : spi-pxa2xx : fix spi init of WM510205 codec via ACPI (resend)
  • From: Christian Hartmann <cornogle@xxxxxxxxxxxxxx>
• Re: [alsa-devel] Fwd: [PATCH 1/1] SPI : spi-pxa2xx : fix spi init of WM510205 codec via ACPI (resend)
  • From: Christian Hartmann <cornogle@xxxxxxxxxxxxxx>
• Re: [alsa-devel] Fwd: [PATCH 1/1] SPI : spi-pxa2xx : fix spi init of WM510205 codec via ACPI (resend)
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• Re: [alsa-devel] Fwd: [PATCH 1/1] SPI : spi-pxa2xx : fix spi init of WM510205 codec via ACPI (resend)
  • From: Christian Hartmann <cornogle@xxxxxxxxxxxxxx>
• Re: [alsa-devel] Fwd: [PATCH 1/1] SPI : spi-pxa2xx : fix spi init of WM510205 codec via ACPI (resend)
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• Re: [alsa-devel] Fwd: [PATCH 1/1] SPI : spi-pxa2xx : fix spi init of WM510205 codec via ACPI (resend)
  • From: Christian Hartmann <cornogle@xxxxxxxxxxxxxx>
• Re: [alsa-devel] Fwd: [PATCH 1/1] SPI : spi-pxa2xx : fix spi init of WM510205 codec via ACPI (resend)
  • From: Charles Keepax <ckeepax@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [alsa-devel] Fwd: [PATCH 1/1] SPI : spi-pxa2xx : fix spi init of WM510205 codec via ACPI (resend)
  • From: Charles Keepax <ckeepax@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [alsa-devel] Fwd: [PATCH 1/1] SPI : spi-pxa2xx : fix spi init of WM510205 codec via ACPI (resend)
  • From: Christian Hartmann <cornogle@xxxxxxxxxxxxxx>
• [PATCH v6] ARM: sun4i: spi: Allow transfers larger than FIFO size
  • From: Olliver Schinagl <oliver@xxxxxxxxxxx>
• [PATCH v6] ARM: sun4i: spi: Allow transfers larger than FIFO size
  • From: Olliver Schinagl <oliver@xxxxxxxxxxx>
• Applied "spi: mediatek: mtk_spi_driver can be static" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• [spi:topic/mtk 2/2] drivers/spi/spi-mt65xx.c:362:24: sparse: incorrect type in argument 1 (different base types)
  • From: kbuild test robot <fengguang.wu@xxxxxxxxx>
• [PATCH spi] spi: mediatek: mtk_spi_driver can be static
  • From: kbuild test robot <fengguang.wu@xxxxxxxxx>
• Applied "spi: mediatek: Add spi bus for Mediatek MT8173" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: Mediatek: Document devicetree bindings for spi bus" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v2] spi: spi-sun4i, spi-sun6i: Fix bit rate calculation
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v2] spi: spi-sun4i, spi-sun6i: Fix bit rate calculation
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [RFC PATCH 1/5] spi: introduce flag for memory mapped read
  • From: Michal Suchanek <hramrach@xxxxxxxxx>
• Re: [RFC PATCH 1/5] spi: introduce flag for memory mapped read
  • From: Vignesh R <vigneshr@xxxxxx>
• Re: [RFC PATCH 1/5] spi: introduce flag for memory mapped read
  • From: Martin Sperl <martin@xxxxxxxxx>
• Re: [RFC PATCH 1/5] spi: introduce flag for memory mapped read
  • From: Michal Suchanek <hramrach@xxxxxxxxx>
• [PATCH v5 1/3] spi: Mediatek: Document devicetree bindings for spi bus
  • From: Leilk Liu <leilk.liu@xxxxxxxxxxxx>
• [PATCH v5 2/3] spi: mediatek: Add spi bus for Mediatek MT8173
  • From: Leilk Liu <leilk.liu@xxxxxxxxxxxx>
• [PATCH v5 3/3] arm64: dts: Add spi bus dts
  • From: Leilk Liu <leilk.liu@xxxxxxxxxxxx>
• [PATCH v5 0/3] Add Mediatek SPI bus driver
  • From: Leilk Liu <leilk.liu@xxxxxxxxxxxx>
• Re: [RFC PATCH 1/5] spi: introduce flag for memory mapped read
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: [PATCH v2] spi: spi-sun4i, spi-sun6i: Fix bit rate calculation
  • From: "Hermann Kraus" <hermr2d2@xxxxxxxxx>
• Re: [RFC PATCH 1/5] spi: introduce flag for memory mapped read
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [RFC PATCH 1/5] spi: introduce flag for memory mapped read
  • From: Michal Suchanek <hramrach@xxxxxxxxx>
• Re: [RFC PATCH 1/5] spi: introduce flag for memory mapped read
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [RFC PATCH 1/5] spi: introduce flag for memory mapped read
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [RFC PATCH 1/5] spi: introduce flag for memory mapped read
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [RFC PATCH 1/5] spi: introduce flag for memory mapped read
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: [RFC PATCH 1/5] spi: introduce flag for memory mapped read
  • From: Vignesh R <vigneshr@xxxxxx>
• Re: [RFC PATCH 1/5] spi: introduce flag for memory mapped read
  • From: Michal Suchanek <hramrach@xxxxxxxxx>
• Re: [PATCH] spi: img-spfi: fix kbuild test robot warning
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Applied "spi: img-spfi: fix kbuild test robot warning" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH] spi: img-spfi: fix kbuild test robot warning
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [RFC PATCH 1/5] spi: introduce flag for memory mapped read
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [RFC PATCH 1/5] spi: introduce flag for memory mapped read
  • From: Michal Suchanek <hramrach@xxxxxxxxx>
• Re: [RFC PATCH 1/5] spi: introduce flag for memory mapped read
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [RFC PATCH 1/5] spi: introduce flag for memory mapped read
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: [RFC PATCH 1/5] spi: introduce flag for memory mapped read
  • From: Michal Suchanek <hramrach@xxxxxxxxx>
• [PATCH] spi: img-spfi: fix kbuild test robot warning
  • From: Sifan Naeem <sifan.naeem@xxxxxxxxxx>
• Re: [RFC PATCH 1/5] spi: introduce flag for memory mapped read
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v4 1/3] dt-binding: spi: Mediatek: Document devicetree bindings for spi bus
  • From: leilk liu <leilk.liu@xxxxxxxxxxxx>
• Re: [PATCH] spi: pxa2xx: Add terminating entry for pxa2xx_spi_pci_compound_match
  • From: Robert Jarzmik <robert.jarzmik@xxxxxxx>
• Re: [RFC PATCH 1/5] spi: introduce flag for memory mapped read
  • From: Michal Suchanek <hramrach@xxxxxxxxx>
• Re: [RFC PATCH 1/5] spi: introduce flag for memory mapped read
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [RFC PATCH 1/5] spi: introduce flag for memory mapped read
  • From: Michal Suchanek <hramrach@xxxxxxxxx>
• Re: [RFC PATCH 1/5] spi: introduce flag for memory mapped read
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH 1/3] spi: bitbang: Replace spinlock by mutex when calling chipselect
  • From: Nicolas Boichat <drinkcat@xxxxxxxxxxxx>
• Re: [PATCH v3] nand: Add NAND driver for Mikrotik RB4xx series boards
  • From: Bert Vermeulen <bert@xxxxxxxx>
• Applied "spi: spi-pxa2xx: Remove unused legacy null dma buffer and allocation for it" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• [PATCH resend] spi: spi-pxa2xx: Remove unused legacy null dma buffer and allocation for it
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
• Re: [RFC PATCH 1/5] spi: introduce flag for memory mapped read
  • From: Michal Suchanek <hramrach@xxxxxxxxx>
• Re: [RFC PATCH 1/5] spi: introduce flag for memory mapped read
  • From: Vignesh R <vigneshr@xxxxxx>
• Re: [RFC PATCH 1/5] spi: introduce flag for memory mapped read
  • From: Michal Suchanek <hramrach@xxxxxxxxx>
• RE: [LINUX RFC 1/2] mtd: spi-nor: add dual parallel mode support
  • From: Ranjit Abhimanyu Waghmode <ranjit.waghmode@xxxxxxxxxx>
• Re: [RFC PATCH 1/5] spi: introduce flag for memory mapped read
  • From: "R, Vignesh" <vigneshr@xxxxxx>
• Applied "spi: spidev: fix inconsistent indenting" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: pxa2xx: Add terminating entry for pxa2xx_spi_pci_compound_match" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: img-spfi: fix multiple calls to request gpio" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v4 1/3] dt-binding: spi: Mediatek: Document devicetree bindings for spi bus
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH] spi: spi-sun4i, spi-sun6i: Fix bit rate calculation
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [RFC PATCH 4/5] ARM: dts: DRA7: Add memory map region entries for qspi
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [RFC PATCH 1/5] spi: introduce flag for memory mapped read
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: Additional SPI-master parameters per SPI-Device in device-tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: Additional SPI-master parameters per SPI-Device in device-tree
  • From: Martin Sperl <kernel@xxxxxxxxxxxxxxxx>
• Re: Additional SPI-master parameters per SPI-Device in device-tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH] spi: bcm2835: set up spi-mode before asserting cs-gpio
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH 3/3] spi: s3c24xx: Convert spinlock to mutex
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH 1/3] spi: bitbang: Replace spinlock by mutex when calling chipselect
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH] spi: bcm2835: set up spi-mode before asserting cs-gpio
  • From: Martin Sperl <kernel@xxxxxxxxxxxxxxxx>
• Re: Additional SPI-master parameters per SPI-Device in device-tree
  • From: Martin Sperl <kernel@xxxxxxxxxxxxxxxx>
• Re: Additional SPI-master parameters per SPI-Device in device-tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH 1/2] spi: spi-pxa2xx: Remove unused legacy PXA DMA API channel numbers
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Additional SPI-master parameters per SPI-Device in device-tree
  • From: Martin Sperl <kernel@xxxxxxxxxxxxxxxx>
• [PATCH 2/3] spi: ppc44x: Remove chipselect from setupxfer
  • From: Nicolas Boichat <drinkcat@xxxxxxxxxxxx>
• [PATCH 3/3] spi: s3c24xx: Convert spinlock to mutex
  • From: Nicolas Boichat <drinkcat@xxxxxxxxxxxx>
• [PATCH 1/3] spi: bitbang: Replace spinlock by mutex when calling chipselect
  • From: Nicolas Boichat <drinkcat@xxxxxxxxxxxx>
• Re: [PATCH] spi: pxa2xx: Add terminating entry for pxa2xx_spi_pci_compound_match
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
• Re: [PATCH 1/2] spi: spi-pxa2xx: Remove unused legacy PXA DMA API channel numbers
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
• [PATCH] spi: pxa2xx: Add terminating entry for pxa2xx_spi_pci_compound_match
  • From: Axel Lin <axel.lin@xxxxxxxxxx>
• Applied "spi: spi-pxa2xx: Remove unused legacy PXA DMA API channel numbers" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH 1/2] spi: spi-pxa2xx: Remove unused legacy PXA DMA API channel numbers
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [LINUX RFC 1/2] mtd: spi-nor: add dual parallel mode support
  • From: Mark Brown <broonie@xxxxxxxxxx>
• [PATCH 2/2] spi: spi-pxa2xx: Remove unused legacy null dma buffer and allocation for it
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
• [PATCH 1/2] spi: spi-pxa2xx: Remove unused legacy PXA DMA API channel numbers
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
• [LINUX RFC 1/2] mtd: spi-nor: add dual parallel mode support
  • From: Ranjit Waghmode <ranjit.waghmode@xxxxxxxxxx>
• [LINUX RFC 2/2] spi: zynqmp: gqspi: add support for dual parallel mode configuration
  • From: Ranjit Waghmode <ranjit.waghmode@xxxxxxxxxx>
• [LINUX RFC 0/2] spi: add dual parallel mode support in Zynq MPSoC GQSPI controller
  • From: Ranjit Waghmode <ranjit.waghmode@xxxxxxxxxx>
• Re: [RFC PATCH 4/5] ARM: dts: DRA7: Add memory map region entries for qspi
  • From: Vignesh R <vigneshr@xxxxxx>
• Re: [RFC PATCH 4/5] ARM: dts: DRA7: Add memory map region entries for qspi
  • From: Vignesh R <vigneshr@xxxxxx>
• Re: [RFC PATCH 4/5] ARM: dts: DRA7: Add memory map region entries for qspi
  • From: Vignesh R <vigneshr@xxxxxx>
• Re: [RFC PATCH 1/5] spi: introduce flag for memory mapped read
  • From: Vignesh R <vigneshr@xxxxxx>
• [PATCH] spi: spi-sun4i, spi-sun6i: Fix bit rate calculation
  • From: "Hermann Kraus" <hermr2d2@xxxxxxxxx>
• Applied "spi: pxa2xx: Add support for Intel Sunrisepoint" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: xcomm: Export I2C module alias information" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH 1/2] spi: bcm2835: add spi-bcm2835aux driver for the auxiliar spi1 and spi2
  • From: Stephen Warren <swarren@xxxxxxxxxxxxx>
• Re: [PATCH 1/2] spi: bcm2835: add spi-bcm2835aux driver for the auxiliar spi1 and spi2
  • From: Stephen Warren <swarren@xxxxxxxxxxxxx>
• Re: [RFC PATCH 4/5] ARM: dts: DRA7: Add memory map region entries for qspi
  • From: Brian Norris <computersforpeace@xxxxxxxxx>
• Re: [RFC PATCH 4/5] ARM: dts: DRA7: Add memory map region entries for qspi
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [RFC PATCH 1/5] spi: introduce flag for memory mapped read
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH 1/2] spi: bcm2835: add spi-bcm2835aux driver for the auxiliar spi1 and spi2
  • From: Stefan Wahren <info@xxxxxxxxxxxxxx>
• Re: [RFC PATCH 4/5] ARM: dts: DRA7: Add memory map region entries for qspi
  • From: Sekhar Nori <nsekhar@xxxxxx>
• [PATCH] spi: spidev: fix inconsistent indenting
  • From: Colin King <colin.king@xxxxxxxxxxxxx>
• Re: [PATCH v3 5/5] mtd: atmel-quadspi: add driver for Atmel QSPI controller
  • From: Nicolas Ferre <nicolas.ferre@xxxxxxxxx>
• Re: [PATCH v3 4/5] Documentation: atmel-quadspi: add binding file for Atmel QSPI driver
  • From: Nicolas Ferre <nicolas.ferre@xxxxxxxxx>
• Re: [PATCH v4 0/3] Add Mediatek SPI bus driver
  • From: leilk liu <leilk.liu@xxxxxxxxxxxx>
• Re: [PATCH v4 1/3] dt-binding: spi: Mediatek: Document devicetree bindings for spi bus
  • From: leilk liu <leilk.liu@xxxxxxxxxxxx>
• Re: [PATCH v4 0/3] Add Mediatek SPI bus driver
  • From: Jonas Gorski <jogo@xxxxxxxxxxx>
• Re: [PATCH v4 1/3] dt-binding: spi: Mediatek: Document devicetree bindings for spi bus
  • From: Jonas Gorski <jogo@xxxxxxxxxxx>
• Re: [PATCH 00/27] Export I2C and OF module aliases in missing drivers
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• Re: [PATCH 00/27] Export I2C and OF module aliases in missing drivers
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [PATCH 00/27] Export I2C and OF module aliases in missing drivers
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• [PATCH 02/27] spi: xcomm: Export I2C module alias information
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• [PATCH 27/27] i2c: (RFC, don't apply) report OF style modalias when probing using DT
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• [PATCH 00/27] Export I2C and OF module aliases in missing drivers
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• Re: [PATCH 1/2] spi: bcm2835: add spi-bcm2835aux driver for the auxiliar spi1 and spi2
  • From: Martin Sperl <kernel@xxxxxxxxxxxxxxxx>
• [PATCH] spi: pxa2xx: Add support for Intel Sunrisepoint
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
• Re: [PATCH 08/11] MTD: m25p80: Add option to limit SPI transfer size.
  • From: Marek Vasut <marex@xxxxxxx>
• Re: [PATCH 08/11] MTD: m25p80: Add option to limit SPI transfer size.
  • From: Michal Suchanek <hramrach@xxxxxxxxx>
• Re: [PATCH 08/11] MTD: m25p80: Add option to limit SPI transfer size.
  • From: Marek Vasut <marex@xxxxxxx>
• Re: [RFC PATCH 2/2] dt: spi: s3c64xx: add compatible to controller-data
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [RFC PATCH 2/2] dt: spi: s3c64xx: add compatible to controller-data
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [RFC PATCH 2/2] dt: spi: s3c64xx: add compatible to controller-data
  • From: Michal Suchanek <hramrach@xxxxxxxxx>
• Re: [RFC PATCH 2/2] dt: spi: s3c64xx: add compatible to controller-data
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/2] spi: bcm2835: add spi-bcm2835aux driver for the auxiliar spi1 and spi2
  • From: Martin Sperl <kernel@xxxxxxxxxxxxxxxx>
• Re: [PATCH 1/2] spi: bcm2835: add spi-bcm2835aux driver for the auxiliar spi1 and spi2
  • From: Martin Sperl <kernel@xxxxxxxxxxxxxxxx>
• Re: [PATCH 1/2] spi: bcm2835: add spi-bcm2835aux driver for the auxiliar spi1 and spi2
  • From: Stefan Wahren <info@xxxxxxxxxxxxxx>
• Re: [PATCH 1/2] spi: bcm2835: add spi-bcm2835aux driver for the auxiliar spi1 and spi2
  • From: Martin Sperl <kernel@xxxxxxxxxxxxxxxx>
• Re: [RFC PATCH 2/2] dt: spi: s3c64xx: add compatible to controller-data
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [RFC PATCH 2/2] dt: spi: s3c64xx: add compatible to controller-data
  • From: Michal Suchanek <hramrach@xxxxxxxxx>
• Re: [PATCH 1/2] spi: bcm2835: add spi-bcm2835aux driver for the auxiliar spi1 and spi2
  • From: Noralf Trønnes <noralf@xxxxxxxxxxx>
• Re: [RFC PATCH 2/2] dt: spi: s3c64xx: add compatible to controller-data
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [RFC PATCH 2/2] dt: spi: s3c64xx: add compatible to controller-data
  • From: Brian Norris <computersforpeace@xxxxxxxxx>
• Re: [PATCH 1/2] spi: bcm2835: add spi-bcm2835aux driver for the auxiliar spi1 and spi2
  • From: Stefan Wahren <info@xxxxxxxxxxxxxx>
• Re: [RFC PATCH 2/2] dt: spi: s3c64xx: add compatible to controller-data
  • From: Michal Suchanek <hramrach@xxxxxxxxx>
• Re: [PATCH] spi: bcm2835: fix overflow in calculation of transfer time
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH] spi: bcm2835: fix overflow in calculation of transfer time
  • From: Martin Sperl <kernel@xxxxxxxxxxxxxxxx>
• Re: [PATCH] spi: bcm2835: fix overflow in calculation of transfer time
  • From: Martin Sperl <kernel@xxxxxxxxxxxxxxxx>
• Applied "spi: img-spfi: check for timeout error before proceeding" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: bcm2835: fix overflow in calculation of transfer time" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: Fix regression in spi-bitbang-txrx.h" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• RE: [PATCH 1/2] spi: img-spfi: check for timeout error before proceeding
  • From: Sifan Naeem <Sifan.Naeem@xxxxxxxxxx>
• [PATCH v2] spi: img-spfi: check for timeout error before proceeding
  • From: Sifan Naeem <sifan.naeem@xxxxxxxxxx>
• Re: [PATCH] spi: bcm2835: fix overflow in calculation of transfer time
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [RFC PATCH 2/2] dt: spi: s3c64xx: add compatible to controller-data
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH 1/2] spi: img-spfi: check for timeout error before proceeding
  • From: Mark Brown <broonie@xxxxxxxxxx>
• RE: [PATCH 2/2] spi: img-spfi: fix spfi_setup by removing gpio_request_one
  • From: Sifan Naeem <Sifan.Naeem@xxxxxxxxxx>
• Re: [PATCH 2/2] spi: img-spfi: fix spfi_setup by removing gpio_request_one
  • From: Mark Brown <broonie@xxxxxxxxxx>
• [PATCH v4 1/3] dt-binding: spi: Mediatek: Document devicetree bindings for spi bus
  • From: Leilk Liu <leilk.liu@xxxxxxxxxxxx>
• [PATCH v4 3/3] arm64: dts: Add spi bus dts
  • From: Leilk Liu <leilk.liu@xxxxxxxxxxxx>
• [PATCH v4 2/3] spi: mediatek: Add spi bus for Mediatek MT8173
  • From: Leilk Liu <leilk.liu@xxxxxxxxxxxx>
• RE: [PATCH 2/2] spi: img-spfi: fix spfi_setup by removing gpio_request_one
  • From: Sifan Naeem <Sifan.Naeem@xxxxxxxxxx>
• [PATCH v4 0/3] Add Mediatek SPI bus driver
  • From: Leilk Liu <leilk.liu@xxxxxxxxxxxx>
• RE: [PATCH] spi: img-spfi: fix multiple calls to request gpio
  • From: Sifan Naeem <Sifan.Naeem@xxxxxxxxxx>
• [PATCH v2] spi: img-spfi: fix multiple calls to request gpio
  • From: Sifan Naeem <sifan.naeem@xxxxxxxxxx>
• [PATCH] spi: img-spfi: fix multiple calls to request gpio
  • From: Sifan Naeem <sifan.naeem@xxxxxxxxxx>
• [PATCH] spi: bcm2835: fix overflow in calculation of transfer time
  • From: kernel@xxxxxxxxxxxxxxxx
• [PATCH] spi: Fix regression in spi-bitbang-txrx.h
  • From: Lars Persson <lars.persson@xxxxxxxx>
• Re: [PATCH v2 2/2] spi: s3c64xx: add more debug prints.
  • From: Mark Brown <broonie@xxxxxxxxxx>
• [PATCH] spi: bcm2835: set up spi-mode before asserting cs-gpio
  • From: kernel@xxxxxxxxxxxxxxxx
• Re: [PATCH 1/2] spi: bcm2835: add spi-bcm2835aux driver for the auxiliar spi1 and spi2
  • From: Martin Sperl <kernel@xxxxxxxxxxxxxxxx>
• [RFC PATCH 1/5] spi: introduce flag for memory mapped read
  • From: Vignesh R <vigneshr@xxxxxx>
• [RFC PATCH 0/5] Add memory mapped read support for TI QSPI.
  • From: Vignesh R <vigneshr@xxxxxx>
• [RFC PATCH 4/5] ARM: dts: DRA7: Add memory map region entries for qspi
  • From: Vignesh R <vigneshr@xxxxxx>
• [RFC PATCH 5/5] ARM: dts: AM4372: Add memory map region entries for qspi
  • From: Vignesh R <vigneshr@xxxxxx>
• [RFC PATCH 2/5] spi: spi-ti-qspi: Add memory mapped read support
  • From: Vignesh R <vigneshr@xxxxxx>
• [RFC PATCH 3/5] mtd: devices: m25p80: set flag to request memory mapped read
  • From: Vignesh R <vigneshr@xxxxxx>
• Re: [PATCH 1/2] spi: bcm2835: add spi-bcm2835aux driver for the auxiliar spi1 and spi2
  • From: Martin Sperl <kernel@xxxxxxxxxxxxxxxx>
• Re: [PATCH 1/2] spi: bcm2835: add spi-bcm2835aux driver for the auxiliar spi1 and spi2
  • From: Stephen Warren <swarren@xxxxxxxxxxxxx>
• Re: [PATCH 08/11] MTD: m25p80: Add option to limit SPI transfer size.
  • From: Michal Suchanek <hramrach@xxxxxxxxx>
• Re: [PATCH 08/11] MTD: m25p80: Add option to limit SPI transfer size.
  • From: Marek Vasut <marex@xxxxxxx>
• RE: [PATCH 2/2] spi: img-spfi: fix spfi_setup by removing gpio_request_one
  • From: Sifan Naeem <Sifan.Naeem@xxxxxxxxxx>
• Re: [PATCH 2/2] spi: img-spfi: fix spfi_setup by removing gpio_request_one
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH 2/2] spi: img-spfi: fix spfi_setup by removing gpio_request_one
  • From: Andrew Bresticker <abrestic@xxxxxxxxxxxx>
• Re: [PATCH 1/2] spi: img-spfi: check for timeout error before proceeding
  • From: Andrew Bresticker <abrestic@xxxxxxxxxxxx>
• Re: [RFC PATCH 0/2] spi: add dual parallel & stacked mode support in Zynq MPSoC GQSPI controller
  • From: Mark Brown <broonie@xxxxxxxxxx>
• RE: [RFC PATCH 0/2] spi: add dual parallel & stacked mode support in Zynq MPSoC GQSPI controller
  • From: Ranjit Abhimanyu Waghmode <ranjit.waghmode@xxxxxxxxxx>
• Re: [PATCH v2 0/2] spi: dw: Reintroduce optional 16 bit data register I/O
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [RESEND PATCH v2 1/2] dt: snps,dw-apb-ssi: Document new I/O data register width property
  • From: Rob Herring <robherring2@xxxxxxxxx>
• [PATCH 2/2] spi: img-spfi: fix spfi_setup by removing gpio_request_one
  • From: Sifan Naeem <sifan.naeem@xxxxxxxxxx>
• [PATCH 1/2] spi: img-spfi: check for timeout error before proceeding
  • From: Sifan Naeem <sifan.naeem@xxxxxxxxxx>
• Re: [PATCH v2 0/2] spi: dw: Reintroduce optional 16 bit data register I/O
  • From: Michael van der Westhuizen <michael@xxxxxxxxxxxxxxxx>
• [RESEND PATCH v2 2/2] spi: dw: Allow interface drivers to limit data I/O to word sizes
  • From: Michael van der Westhuizen <michael@xxxxxxxxxxxxxxxx>
• [RESEND PATCH v2 1/2] dt: snps,dw-apb-ssi: Document new I/O data register width property
  • From: Michael van der Westhuizen <michael@xxxxxxxxxxxxxxxx>
• [RESEND PATCH v2 0/2] spi: dw: Reintroduce optional 16 bit data register I/O
  • From: Michael van der Westhuizen <michael@xxxxxxxxxxxxxxxx>
• Re: [PATCH v2 0/2] spi: dw: Reintroduce optional 16 bit data register I/O
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v2 5/5] mtd: atmel-quadspi: add driver for Atmel QSPI controller
  • From: Marek Vasut <marex@xxxxxxx>
• Re: [PATCH v2 0/2] spi: dw: Reintroduce optional 16 bit data register I/O
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH 08/11] MTD: m25p80: Add option to limit SPI transfer size.
  • From: Michal Suchanek <hramrach@xxxxxxxxx>
• [PATCH v3 5/5] mtd: atmel-quadspi: add driver for Atmel QSPI controller
  • From: Cyrille Pitchen <cyrille.pitchen@xxxxxxxxx>
• [PATCH v3 4/5] Documentation: atmel-quadspi: add binding file for Atmel QSPI driver
  • From: Cyrille Pitchen <cyrille.pitchen@xxxxxxxxx>
• [PATCH v3 3/5] mtd: spi-nor: allow to tune the number of dummy cycles
  • From: Cyrille Pitchen <cyrille.pitchen@xxxxxxxxx>
• [PATCH v3 2/5] Documentation: mtd: add a DT property to set the number of dummy cycles
  • From: Cyrille Pitchen <cyrille.pitchen@xxxxxxxxx>
• [PATCH v3 1/5] mtd: spi-nor: notify (Q)SPI controller about protocol change
  • From: Cyrille Pitchen <cyrille.pitchen@xxxxxxxxx>
• [PATCH v3 0/5] add driver for Atmel QSPI controller
  • From: Cyrille Pitchen <cyrille.pitchen@xxxxxxxxx>
• Re: [PATCH v2 5/5] mtd: atmel-quadspi: add driver for Atmel QSPI controller
  • From: Cyrille Pitchen <cyrille.pitchen@xxxxxxxxx>
• Re: [PATCH v3 3/4] spi: mediatek: Add spi bus for Mediatek MT8173
  • From: leilk liu <leilk.liu@xxxxxxxxxxxx>
• Re: [PATCH v3 2/4] dt-bindings: ARM: Mediatek: Document devicetree bindings for spi bus
  • From: leilk liu <leilk.liu@xxxxxxxxxxxx>
• Applied "spi: support spi without dma channel to use can_dma()" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v3 3/4] spi: mediatek: Add spi bus for Mediatek MT8173
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v3 2/4] dt-bindings: ARM: Mediatek: Document devicetree bindings for spi bus
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: davinci: Set prescale value based on register value" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: davinci: Choose correct pre-scaler limit based on SOC" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: omap2-mcspi: add runtime PM to set_cs()" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• [GIT PULL] spi fixes for v4.2
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH] spi: omap2-mcspi: add runtime PM to set_cs()
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v2 0/2] spi: dw: Reintroduce optional 16 bit data register I/O
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v2 0/2] spi: dw: Reintroduce optional 16 bit data register I/O
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Applied "spi: imx: Fix small DMA transfers" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH] Revert "spi: bitbang: only toggle bitchanges"
  • From: Mark Brown <broonie@xxxxxxxxxx>
• [PATCH] spi: imx: Fix small DMA transfers
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] Revert "spi: bitbang: only toggle bitchanges"
  • From: Michael Grzeschik <mgr@xxxxxxxxxxxxxx>
• Re: [PATCH] Revert "spi: bitbang: only toggle bitchanges"
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• Re: [PATCH] Revert "spi: bitbang: only toggle bitchanges"
  • From: Jonas Gorski <jogo@xxxxxxxxxxx>
• Re: [RESEND][PATCH 3/4] ARM: davinci: Set proper SPI prescale limit value
  • From: Sekhar Nori <nsekhar@xxxxxx>
• Re: [RESEND][PATCH 2/4] spi: davinci: Choose correct pre-scaler limit based on SOC
  • From: Sekhar Nori <nsekhar@xxxxxx>
• Re: [PATCH] Revert "spi: bitbang: only toggle bitchanges"
  • From: Lars Persson <lars.persson@xxxxxxxx>
• Re: [PATCH 08/11] MTD: m25p80: Add option to limit SPI transfer size.
  • From: Michal Suchanek <hramrach@xxxxxxxxx>
• Re: [RFC PATCH 0/2] spi: add dual parallel & stacked mode support in Zynq MPSoC GQSPI controller
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH] Revert "spi: bitbang: only toggle bitchanges"
  • From: Mark Brown <broonie@xxxxxxxxxx>
• RE: [RFC PATCH 0/2] spi: add dual parallel & stacked mode support in Zynq MPSoC GQSPI controller
  • From: Ranjit Abhimanyu Waghmode <ranjit.waghmode@xxxxxxxxxx>
• Re: [PATCH 08/11] MTD: m25p80: Add option to limit SPI transfer size.
  • From: Marek Vasut <marex@xxxxxxx>
• Re: [PATCH 1/2] spi: bcm2835: add spi-bcm2835aux driver for the auxiliar spi1 and spi2
  • From: Martin Sperl <kernel@xxxxxxxxxxxxxxxx>
• [PATCH] Revert "spi: bitbang: only toggle bitchanges"
  • From: Lars Persson <lars.persson@xxxxxxxx>
• Re: [PATCH 1/2] spi: bcm2835: add spi-bcm2835aux driver for the auxiliar spi1 and spi2
  • From: Stephen Warren <swarren@xxxxxxxxxxxxx>
• Re: [PATCH 08/11] MTD: m25p80: Add option to limit SPI transfer size.
  • From: Michal Suchanek <hramrach@xxxxxxxxx>
• Re: [PATCH 08/11] MTD: m25p80: Add option to limit SPI transfer size.
  • From: Michal Suchanek <hramrach@xxxxxxxxx>
• [PATCH v3 3/4] spi: mediatek: Add spi bus for Mediatek MT8173
  • From: Leilk Liu <leilk.liu@xxxxxxxxxxxx>
• [PATCH v3 2/4] dt-bindings: ARM: Mediatek: Document devicetree bindings for spi bus
  • From: Leilk Liu <leilk.liu@xxxxxxxxxxxx>
• [PATCH v3 4/4] arm64: dts: Add spi bus dts
  • From: Leilk Liu <leilk.liu@xxxxxxxxxxxx>
• [PATCH v3 1/4] spi: support spi without dma channel to use can_dma()
  • From: Leilk Liu <leilk.liu@xxxxxxxxxxxx>
• [PATCH v3 0/4] Add Mediatek SPI bus driver
  • From: Leilk Liu <leilk.liu@xxxxxxxxxxxx>
• Re: [PATCH v2 2/5] Documentation: mtd: add a DT property to set the number of dummy cycles
  • From: Marek Vasut <marex@xxxxxxx>
• Re: [PATCH v2 1/5] mtd: spi-nor: notify (Q)SPI controller about protocol change
  • From: Marek Vasut <marex@xxxxxxx>
• Re: [PATCH] spi: omap2-mcspi: add runtime PM to set_cs()
  • From: Michael Welling <mwelling@xxxxxxxx>
• [PATCH] spi: omap2-mcspi: add runtime PM to set_cs()
  • From: Sebastian Reichel <sre@xxxxxxxxxx>
• Re: [PATCH v2 03/10] mtd: spi-nor: add DDR quad read support
  • From: Zhi Li <lznuaa@xxxxxxxxx>
• Re: [PATCH v2 03/10] mtd: spi-nor: add DDR quad read support
  • From: Zhi Li <lznuaa@xxxxxxxxx>
• Re: [PATCH v2 2/5] Documentation: mtd: add a DT property to set the number of dummy cycles
  • From: Cyrille Pitchen <cyrille.pitchen@xxxxxxxxx>
• Re: [PATCH 1/2] spi: bcm2835: add spi-bcm2835aux driver for the auxiliar spi1 and spi2
  • From: Martin Sperl <kernel@xxxxxxxxxxxxxxxx>
• Re: [PATCH v2 1/5] mtd: spi-nor: notify (Q)SPI controller about protocol change
  • From: Cyrille Pitchen <cyrille.pitchen@xxxxxxxxx>
• Re: [RESEND][PATCH 4/4] ARM: dts: keystone: Add ti,keystone-spi for SPI
  • From: santosh shilimkar <santosh.shilimkar@xxxxxxxxxx>
• Re: [PATCH v2 2/5] Documentation: mtd: add a DT property to set the number of dummy cycles
  • From: Marek Vasut <marex@xxxxxxx>
• Re: [PATCH v2 1/5] mtd: spi-nor: notify (Q)SPI controller about protocol change
  • From: Marek Vasut <marex@xxxxxxx>
• Re: [PATCH v2 5/5] mtd: atmel-quadspi: add driver for Atmel QSPI controller
  • From: Marek Vasut <marex@xxxxxxx>
• [PATCH v2 5/5] mtd: atmel-quadspi: add driver for Atmel QSPI controller
  • From: Cyrille Pitchen <cyrille.pitchen@xxxxxxxxx>
• [PATCH v2 4/5] Documentation: atmel-quadspi: add binding file for Atmel QSPI driver
  • From: Cyrille Pitchen <cyrille.pitchen@xxxxxxxxx>
• [PATCH v2 1/5] mtd: spi-nor: notify (Q)SPI controller about protocol change
  • From: Cyrille Pitchen <cyrille.pitchen@xxxxxxxxx>
• [PATCH v2 3/5] mtd: spi-nor: allow to tune the number of dummy cycles
  • From: Cyrille Pitchen <cyrille.pitchen@xxxxxxxxx>
• [PATCH v2 2/5] Documentation: mtd: add a DT property to set the number of dummy cycles
  • From: Cyrille Pitchen <cyrille.pitchen@xxxxxxxxx>
• [PATCH v2 0/5] add driver for Atmel QSPI controller
  • From: Cyrille Pitchen <cyrille.pitchen@xxxxxxxxx>
• [RESEND][PATCH 1/4] spi: davinci: Set prescale value based on register value
  • From: Franklin S Cooper Jr <fcooper@xxxxxx>
• [RESEND][PATCH 3/4] ARM: davinci: Set proper SPI prescale limit value
  • From: Franklin S Cooper Jr <fcooper@xxxxxx>
• [RESEND][PATCH 4/4] ARM: dts: keystone: Add ti,keystone-spi for SPI
  • From: Franklin S Cooper Jr <fcooper@xxxxxx>
• [RESEND][PATCH 2/4] spi: davinci: Choose correct pre-scaler limit based on SOC
  • From: Franklin S Cooper Jr <fcooper@xxxxxx>
• [RESEND][PATCH 0/4] spi: davinci: Improve prescaler limit support
  • From: Franklin S Cooper Jr <fcooper@xxxxxx>
• Re: [PATCH 08/11] MTD: m25p80: Add option to limit SPI transfer size.
  • From: Marek Vasut <marex@xxxxxxx>
• Re: [PATCH 08/11] MTD: m25p80: Add option to limit SPI transfer size.
  • From: Michal Suchanek <hramrach@xxxxxxxxx>
• Re: [PATCH 08/11] MTD: m25p80: Add option to limit SPI transfer size.
  • From: Marek Vasut <marex@xxxxxxx>
• Re: [PATCH 08/11] MTD: m25p80: Add option to limit SPI transfer size.
  • From: Michal Suchanek <hramrach@xxxxxxxxx>
• Re: [PATCH 08/11] MTD: m25p80: Add option to limit SPI transfer size.
  • From: Marek Vasut <marex@xxxxxxx>
• Re: [PATCH 08/11] MTD: m25p80: Add option to limit SPI transfer size.
  • From: Michal Suchanek <hramrach@xxxxxxxxx>
• Re: [PATCH 08/11] MTD: m25p80: Add option to limit SPI transfer size.
  • From: Marek Vasut <marex@xxxxxxx>
• Re: [PATCH 08/11] MTD: m25p80: Add option to limit SPI transfer size.
  • From: Michal Suchanek <hramrach@xxxxxxxxx>
• Re: [PATCH 08/11] MTD: m25p80: Add option to limit SPI transfer size.
  • From: Vinod Koul <vinod.koul@xxxxxxxxx>
• Re: [PATCH 1/2] spi: bcm2835: add spi-bcm2835aux driver for the auxiliar spi1 and spi2
  • From: Stephen Warren <swarren@xxxxxxxxxxxxx>
• Re: [PATCH v3] nand: Add NAND driver for Mikrotik RB4xx series boards
  • From: Brian Norris <computersforpeace@xxxxxxxxx>
• Re: [PATCH] Documentation: dt: mtd: replace "nor-jedec" binding with "jedec,spi-nor"
  • From: Brian Norris <computersforpeace@xxxxxxxxx>
• [PATCH] spi: mpc512x-psc: fix compiler warning about uninitialized variable
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH 08/11] MTD: m25p80: Add option to limit SPI transfer size.
  • From: Michal Suchanek <hramrach@xxxxxxxxx>
• Re: [PATCH 08/11] MTD: m25p80: Add option to limit SPI transfer size.
  • From: Vinod Koul <vinod.koul@xxxxxxxxx>
• Re: [PATCH 4/7] Documentation: mtd: add a DT property to set the latency code of Spansion memory
  • From: Marek Vasut <marex@xxxxxxx>
• Re: [PATCH 4/7] Documentation: mtd: add a DT property to set the latency code of Spansion memory
  • From: Cyrille Pitchen <cyrille.pitchen@xxxxxxxxx>
• Re: [PATCH 7/7] mtd: atmel-quadspi: add driver for Atmel QSPI controller
  • From: Cyrille Pitchen <cyrille.pitchen@xxxxxxxxx>
• Re: [PATCH 6/7] Documentation: atmel-quadspi: add binding file for Atmel QSPI driver
  • From: Cyrille Pitchen <cyrille.pitchen@xxxxxxxxx>
• Re: [PATCH 08/11] MTD: m25p80: Add option to limit SPI transfer size.
  • From: Michal Suchanek <hramrach@xxxxxxxxx>
• RE: [RFC PATCH 0/2] spi: add dual parallel & stacked mode support in Zynq MPSoC GQSPI controller
  • From: Ranjit Abhimanyu Waghmode <ranjit.waghmode@xxxxxxxxxx>
• Re: [PATCH 6/7] Documentation: atmel-quadspi: add binding file for Atmel QSPI driver
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH 7/7] mtd: atmel-quadspi: add driver for Atmel QSPI controller
  • From: Paul Bolle <pebolle@xxxxxxxxxx>
• Re: [alsa-devel] Fwd: [PATCH 1/1] SPI : spi-pxa2xx : fix spi init of WM510205 codec via ACPI (resend)
  • From: Charles Keepax <ckeepax@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [alsa-devel] Fwd: [PATCH 1/1] SPI : spi-pxa2xx : fix spi init of WM510205 codec via ACPI (resend)
  • From: Christian Hartmann <cornogle@xxxxxxxxxxxxxx>
• Re: [alsa-devel] Fwd: [PATCH 1/1] SPI : spi-pxa2xx : fix spi init of WM510205 codec via ACPI (resend)
  • From: Christian Hartmann <cornogle@xxxxxxxxxxxxxx>
• [PATCH] dt-bindings: powerpc: adapt mpc5121-psc document to reality
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH 4/7] Documentation: mtd: add a DT property to set the latency code of Spansion memory
  • From: Marek Vasut <marex@xxxxxxx>
• [PATCH 2/7] mtd: spi-nor: notify (Q)SPI controller about protocol change
  • From: Cyrille Pitchen <cyrille.pitchen@xxxxxxxxx>
• [PATCH 1/7] Documentation: mtd: add a DT property to set the number of dummy cycles
  • From: Cyrille Pitchen <cyrille.pitchen@xxxxxxxxx>
• [PATCH 3/7] mtd: spi-nor: allow to tune the number of dummy cycles
  • From: Cyrille Pitchen <cyrille.pitchen@xxxxxxxxx>
• [PATCH 4/7] Documentation: mtd: add a DT property to set the latency code of Spansion memory
  • From: Cyrille Pitchen <cyrille.pitchen@xxxxxxxxx>
• [PATCH 6/7] Documentation: atmel-quadspi: add binding file for Atmel QSPI driver
  • From: Cyrille Pitchen <cyrille.pitchen@xxxxxxxxx>
• [PATCH 5/7] mtd: spi-nor: allow the set the latency code on Spansion memories
  • From: Cyrille Pitchen <cyrille.pitchen@xxxxxxxxx>
• [PATCH 7/7] mtd: atmel-quadspi: add driver for Atmel QSPI controller
  • From: Cyrille Pitchen <cyrille.pitchen@xxxxxxxxx>
• [PATCH 0/7] add driver for Atmel QSPI controller
  • From: Cyrille Pitchen <cyrille.pitchen@xxxxxxxxx>
• Re: [PATCH] spi: mpc512x-psc: add support for Freescale MPC5125
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: spidev: Fix typo" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [RFC PATCH 0/2] spi: add dual parallel & stacked mode support in Zynq MPSoC GQSPI controller
  • From: Mark Brown <broonie@xxxxxxxxxx>
• RE: [RFC PATCH 0/2] spi: add dual parallel & stacked mode support in Zynq MPSoC GQSPI controller
  • From: Ranjit Abhimanyu Waghmode <ranjit.waghmode@xxxxxxxxxx>
• Re: [PATCH 08/11] MTD: m25p80: Add option to limit SPI transfer size.
  • From: Marek Vasut <marex@xxxxxxx>
• Re: [PATCH 08/11] MTD: m25p80: Add option to limit SPI transfer size.
  • From: Brian Norris <computersforpeace@xxxxxxxxx>
• Re: [PATCH 08/11] MTD: m25p80: Add option to limit SPI transfer size.
  • From: Marek Vasut <marex@xxxxxxx>
• [PATCH] spi: spidev: Fix typo
  • From: Fabio Estevam <festevam@xxxxxxxxx>
• Re: [RFC PATCH 0/2] spi: add dual parallel & stacked mode support in Zynq MPSoC GQSPI controller
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH 08/11] MTD: m25p80: Add option to limit SPI transfer size.
  • From: Brian Norris <computersforpeace@xxxxxxxxx>
• RE: [RFC PATCH 0/2] spi: add dual parallel & stacked mode support in Zynq MPSoC GQSPI controller
  • From: Ranjit Abhimanyu Waghmode <ranjit.waghmode@xxxxxxxxxx>
• Re: [PATCH 08/11] MTD: m25p80: Add option to limit SPI transfer size.
  • From: Marek Vasut <marex@xxxxxxx>
• Re: [PATCH 08/11] MTD: m25p80: Add option to limit SPI transfer size.
  • From: Michal Suchanek <hramrach@xxxxxxxxx>
• Re: [alsa-devel] Fwd: [PATCH 1/1] SPI : spi-pxa2xx : fix spi init of WM510205 codec via ACPI (resend)
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [alsa-devel] Fwd: [PATCH 1/1] SPI : spi-pxa2xx : fix spi init of WM510205 codec via ACPI (resend)
  • From: Charles Keepax <ckeepax@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] spi: mpc512x-psc: add support for Freescale MPC5125
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [alsa-devel] Fwd: [PATCH 1/1] SPI : spi-pxa2xx : fix spi init of WM510205 codec via ACPI (resend)
  • From: Christian Hartmann <cornogle@xxxxxxxxxxxxxx>
• Re: [alsa-devel] Fwd: [PATCH 1/1] SPI : spi-pxa2xx : fix spi init of WM510205 codec via ACPI (resend)
  • From: Christian Hartmann <cornogle@xxxxxxxxxxxxxx>
• Re: [PATCH] spi: Force the registration of the spidev devices
  • From: Lucas De Marchi <lucas.de.marchi@xxxxxxxxx>
• [PATCH 2/4] spi: davinci: Choose correct pre-scaler limit based on SOC
  • From: Franklin S Cooper Jr <fcooper@xxxxxx>
• [PATCH 4/4] ARM: dts: keystone: Add ti,keystone-spi for SPI
  • From: Franklin S Cooper Jr <fcooper@xxxxxx>
• [PATCH 3/4] ARM: davinci: Set proper SPI prescale limit value
  • From: Franklin S Cooper Jr <fcooper@xxxxxx>
• [PATCH 1/4] spi: davinci: Set prescale value based on register value
  • From: Franklin S Cooper Jr <fcooper@xxxxxx>
• [PATCH 0/4] spi: davinci: Improve prescaler limit support
  • From: Franklin S Cooper Jr <fcooper@xxxxxx>
• Re: [RFC PATCH 0/2] spi: add dual parallel & stacked mode support in Zynq MPSoC GQSPI controller
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [RFC PATCH 2/2] spi: zynqmp: gqspi: add support for stacked mode configuration
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [RFC PATCH 1/2] spi: zynqmp: gqspi: add support for dual parallel mode configuration
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH] spi: imx: fix ecspi mode setup
  • From: Andrew Kuksov <qxovxp@xxxxxxxxx>
• Re: [PATCH] spi: imx: fix ecspi mode setup
  • From: Mark Brown <broonie@xxxxxxxxxx>
• [PATCH] spi: imx: fix ecspi mode setup
  • From: "Andrew Y. Kuksov" <qxovxp@xxxxxxxxx>
• Re: [PATCH 1/2] spi: bcm2835: add spi-bcm2835aux driver for the auxiliar spi1 and spi2
  • From: Martin Sperl <kernel@xxxxxxxxxxxxxxxx>
• Re: [PATCH] spi: mpc512x-psc: add support for Freescale MPC5125
  • From: Mark Brown <broonie@xxxxxxxxxx>
• [PATCH] spi: mpc512x-psc: add support for Freescale MPC5125
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH 1/2] spi: bcm2835: add spi-bcm2835aux driver for the auxiliar spi1 and spi2
  • From: Stephen Warren <swarren@xxxxxxxxxxxxx>
• Re: [RFC PATCH 0/2] spi: add dual parallel & stacked mode support in Zynq MPSoC GQSPI controller
  • From: Harini Katakam <harinikatakamlinux@xxxxxxxxx>
• Re: [RFC PATCH 0/2] spi: add dual parallel & stacked mode support in Zynq MPSoC GQSPI controller
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [RFC PATCH 0/2] spi: add dual parallel & stacked mode support in Zynq MPSoC GQSPI controller
  • From: Thomas.Betker@xxxxxxxxxxxxxxxxx
• Re: [alsa-devel] Fwd: [PATCH 1/1] SPI : spi-pxa2xx : fix spi init of WM510205 codec via ACPI (resend)
  • From: Charles Keepax <ckeepax@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: Applied "regulator: da9210: Add optional interrupt support" to the spi tree
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH 1/2] spi: bcm2835: add spi-bcm2835aux driver for the auxiliar spi1 and spi2
  • From: Martin Sperl <kernel@xxxxxxxxxxxxxxxx>
• [PATCH v3 2/2] dt: brcm,bcm2835-aux-spi: add binding documentation for new spi-bcm2835aux
  • From: kernel@xxxxxxxxxxxxxxxx
• [PATCH v3 1/2] spi: bcm2835: add spi-bcm2835aux driver for the auxiliar spi1 and spi2
  • From: kernel@xxxxxxxxxxxxxxxx
• Re: [PATCH 1/2] spi: bcm2835: add spi-bcm2835aux driver for the auxiliar spi1 and spi2
  • From: Stephen Warren <swarren@xxxxxxxxxxxxx>
• Re: [PATCH 1/2] spi: bcm2835: add spi-bcm2835aux driver for the auxiliar spi1 and spi2
  • From: Stephen Warren <swarren@xxxxxxxxxxxxx>
• Re: [PATCH V2] dt: brcm,bcm2835-aux-spi: add binding documentation for new spi-bcm2835aux
  • From: Stephen Warren <swarren@xxxxxxxxxxxxx>
• Re: [PATCH 1/2] spi: bcm2835: add spi-bcm2835aux driver for the auxiliar spi1 and spi2
  • From: Stephen Warren <swarren@xxxxxxxxxxxxx>
• Re: [RFC PATCH 0/2] spi: add dual parallel & stacked mode support in Zynq MPSoC GQSPI controller
  • From: Mike Looijmans <mike.looijmans@xxxxxxxx>
• [PATCH] spi: Drop owner assignment from i2c_driver
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• [RFC PATCH 1/2] spi: zynqmp: gqspi: add support for dual parallel mode configuration
  • From: Ranjit Waghmode <ranjit.waghmode@xxxxxxxxxx>
• [RFC PATCH 0/2] spi: add dual parallel & stacked mode support in Zynq MPSoC GQSPI controller
  • From: Ranjit Waghmode <ranjit.waghmode@xxxxxxxxxx>
• [RFC PATCH 2/2] spi: zynqmp: gqspi: add support for stacked mode configuration
  • From: Ranjit Waghmode <ranjit.waghmode@xxxxxxxxxx>
• Re: linux-4.2-rc1/drivers/spi/spi-zynqmp-gqspi.c:215: possible missing break ?
  • From: Harini Katakam <harinikatakamlinux@xxxxxxxxx>
• Re: [PATCH v2 3/4] spi: mediatek: Add spi bus for Mediatek MT8173
  • From: leilk liu <leilk.liu@xxxxxxxxxxxx>
• Re: [PATCH] spi: spi-fsl-dspi: Update 'dspi' device node compatible string for LS1021A
  • From: Wang Haikun <Haikun.Wang@xxxxxxxxxxxxx>
• Applied "spi: zynq: missing break statement" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: img-spfi: check for max speed supported by the spfi block" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: Fix per-page mapping of unaligned vmalloc-ed buffer" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi/s3c24xx: remove unnecessary memset of s3c24xx_spi" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: sh-msiof: Remove obsolete spi_r8a779x_msiof platform_device_id entries" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: spidev: add compatible value for LTC2488" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi/rockchip: remove unnecessary memset of rockchip_spi" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: expose spi_master and spi_device statistics via sysfs" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "regulator: da9210: Add optional interrupt support" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: SPI_ZYNQMP_GQSPI should depend on HAS_DMA" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: spi: bcm2835: driver for "auxiliar" spi1/spi2
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH] spi: spi-fsl-dspi: Update 'dspi' device node compatible string for LS1021A
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH] spi: SPI_ZYNQMP_GQSPI should depend on HAS_DMA
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [alsa-devel] Fwd: [PATCH 1/1] SPI : spi-pxa2xx : fix spi init of WM510205 codec via ACPI (resend)
  • From: Charles Keepax <ckeepax@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [alsa-devel] Fwd: [PATCH 1/1] SPI : spi-pxa2xx : fix spi init of WM510205 codec via ACPI (resend)
  • From: Mark Brown <broonie@xxxxxxxxxx>
• linux-4.2-rc1/drivers/spi/spi-zynqmp-gqspi.c:215: possible missing break ?
  • From: David Binderman <dcb314@xxxxxxxxxxx>
• Re: [alsa-devel] Fwd: [PATCH 1/1] SPI : spi-pxa2xx : fix spi init of WM510205 codec via ACPI (resend)
  • From: Charles Keepax <ckeepax@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• [PATCH] spi: spi-fsl-dspi: Update 'dspi' device node compatible string for LS1021A
  • From: Haikun Wang <haikun.wang@xxxxxxxxxxxxx>
• Re: [alsa-devel] Fwd: [PATCH 1/1] SPI : spi-pxa2xx : fix spi init of WM510205 codec via ACPI (resend)
  • From: Christian Hartmann <cornogle@xxxxxxxxxxxxxx>
• Re: [PATCH v2 2/4] dt-bindings: ARM: Mediatek: Document devicetree bindings for spi bus
  • From: Jonas Gorski <jogo@xxxxxxxxxxx>
• Re: [PATCH 1/2] spi: bcm2835: add spi-bcm2835aux driver for the auxiliar spi1 and spi2
  • From: Martin Sperl <kernel@xxxxxxxxxxxxxxxx>
• Re: [PATCH 1/2] spi: bcm2835: add spi-bcm2835aux driver for the auxiliar spi1 and spi2
  • From: Noralf Trønnes <noralf@xxxxxxxxxxx>
• Re: [PATCH 1/2] spi: bcm2835: add spi-bcm2835aux driver for the auxiliar spi1 and spi2
  • From: Martin Sperl <kernel@xxxxxxxxxxxxxxxx>
• Re: [PATCH v2 2/4] dt-bindings: ARM: Mediatek: Document devicetree bindings for spi bus
  • From: Matthias Brugger <matthias.bgg@xxxxxxxxx>
• Applied "spi: rspi: Drop variable "error" in qspi_trigger_transfer_out_in()" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: rspi: Make qspi_set_send_trigger() return "unsigned int"" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH V2] dt: brcm,bcm2835-aux-spi: add binding documentation for new spi-bcm2835aux
  • From: Stefan Wahren <info@xxxxxxxxxxxxxx>
• Re: [PATCH v2 3/4] spi: mediatek: Add spi bus for Mediatek MT8173
  • From: leilk liu <leilk.liu@xxxxxxxxxxxx>
• [RFC don't push] spi: pxa2xx: Add support for Intel Sunrisepoint
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 2/4] dt-bindings: ARM: Mediatek: Document devicetree bindings for spi bus
  • From: leilk liu <leilk.liu@xxxxxxxxxxxx>
• Re: [PATCH v2 2/4] dt-bindings: ARM: Mediatek: Document devicetree bindings for spi bus
  • From: Daniel Kurtz <djkurtz@xxxxxxxxxxxx>
• Re: [PATCH 1/2] spi: bcm2835: add spi-bcm2835aux driver for the auxiliar spi1 and spi2
  • From: Noralf Trønnes <noralf@xxxxxxxxxxx>
• Re: [PATCH 1/2] spi: bcm2835: add spi-bcm2835aux driver for the auxiliar spi1 and spi2
  • From: Martin Sperl <kernel@xxxxxxxxxxxxxxxx>
• spi-mt7621 doesn't handle message bigger than (rx_len > 32)
  • From: Baptiste Clenet <bapclenet@xxxxxxxxx>
• Re: [PATCH v2 3/4] spi: mediatek: Add spi bus for Mediatek MT8173
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 1/2] spi/s3c24xx: remove unnecessary memset of s3c24xx_spi
  • From: Daniel Kurtz <djkurtz@xxxxxxxxxxxx>
• Re: [PATCH v2 3/4] spi: mediatek: Add spi bus for Mediatek MT8173
  • From: Daniel Kurtz <djkurtz@xxxxxxxxxxxx>
• [PATCH 2/2] spi/rockchip: remove unnecessary memset of rockchip_spi
  • From: Alexey Klimov <klimov.linux@xxxxxxxxx>
• [PATCH 1/2] spi/s3c24xx: remove unnecessary memset of s3c24xx_spi
  • From: Alexey Klimov <klimov.linux@xxxxxxxxx>
• RE: [PATCH] spi: Fix per-page mapping of unaligned vmalloc-ed buffer
  • From: Andrew Gabbasov <andrew_gabbasov@xxxxxxxxxx>
• Re: [PATCH] spi: Fix per-page mapping of unaligned vmalloc-ed buffer
  • From: Mark Brown <broonie@xxxxxxxxxx>
• [PATCH v2] spi: Fix per-page mapping of unaligned vmalloc-ed buffer
  • From: Andrew Gabbasov <andrew_gabbasov@xxxxxxxxxx>
• RE: [PATCH] spi: Fix per-page mapping of unaligned vmalloc-ed buffer
  • From: Andrew Gabbasov <andrew_gabbasov@xxxxxxxxxx>
• Re: [PATCH v2 3/4] spi: mediatek: Add spi bus for Mediatek MT8173
  • From: Alexey Klimov <klimov.linux@xxxxxxxxx>
• Re: [alsa-devel] Fwd: [PATCH 1/1] SPI : spi-pxa2xx : fix spi init of WM510205 codec via ACPI (resend)
  • From: Charles Keepax <ckeepax@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/2] spi: bcm2835: add spi-bcm2835aux driver for the auxiliar spi1 and spi2
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [alsa-devel] Fwd: [PATCH 1/1] SPI : spi-pxa2xx : fix spi init of WM510205 codec via ACPI (resend)
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v2 4/4] arm64: dts: Add spi bus dts
  • From: Daniel Kurtz <djkurtz@xxxxxxxxxxxx>
• Re: [alsa-devel] Fwd: [PATCH 1/1] SPI : spi-pxa2xx : fix spi init of WM510205 codec via ACPI (resend)
  • From: Christian Hartmann <cornogle@xxxxxxxxxxxxxx>
• Re: [PATCH v2 4/4] arm64: dts: Add spi bus dts
  • From: Daniel Kurtz <djkurtz@xxxxxxxxxxxx>
• [PATCH v2 3/4] spi: mediatek: Add spi bus for Mediatek MT8173
  • From: Leilk Liu <leilk.liu@xxxxxxxxxxxx>
• [PATCH v2 4/4] arm64: dts: Add spi bus dts
  • From: Leilk Liu <leilk.liu@xxxxxxxxxxxx>
• [PATCH v2 2/4] dt-bindings: ARM: Mediatek: Document devicetree bindings for spi bus
  • From: Leilk Liu <leilk.liu@xxxxxxxxxxxx>
• [PATCH v2 1/4] spi: support spi without dma channel to use can_dma()
  • From: Leilk Liu <leilk.liu@xxxxxxxxxxxx>
• [PATCH v2 0/4] Add Mediatek SPI bus driver
  • From: Leilk Liu <leilk.liu@xxxxxxxxxxxx>
• Re: [alsa-devel] Fwd: [PATCH 1/1] SPI : spi-pxa2xx : fix spi init of WM510205 codec via ACPI (resend)
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [alsa-devel] Fwd: [PATCH 1/1] SPI : spi-pxa2xx : fix spi init of WM510205 codec via ACPI (resend)
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: Fwd: [alsa-devel] [PATCH 1/1] SPI : spi-pxa2xx : fix spi init of WM510205 codec via ACPI (resend)
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: Fwd: [alsa-devel] [PATCH 1/1] SPI : spi-pxa2xx : fix spi init of WM510205 codec via ACPI (resend)
  • From: Charles Keepax <ckeepax@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: Fwd: [alsa-devel] [PATCH 1/1] SPI : spi-pxa2xx : fix spi init of WM510205 codec via ACPI (resend)
  • From: Christian Hartmann <cornogle@xxxxxxxxxxxxxx>
• Re: [alsa-devel] Fwd: [PATCH 1/1] SPI : spi-pxa2xx : fix spi init of WM510205 codec via ACPI (resend)
  • From: Christian Hartmann <cornogle@xxxxxxxxxxxxxx>
• Re: [alsa-devel] Fwd: [PATCH 1/1] SPI : spi-pxa2xx : fix spi init of WM510205 codec via ACPI (resend)
  • From: Christian Hartmann <cornogle@xxxxxxxxxxxxxx>
• RE: [PATCH] spi: SPI_ZYNQMP_GQSPI should depend on HAS_DMA
  • From: Ranjit Abhimanyu Waghmode <ranjit.waghmode@xxxxxxxxxx>
• [PATCH] spi: SPI_ZYNQMP_GQSPI should depend on HAS_DMA
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [alsa-devel] Fwd: [PATCH 1/1] SPI : spi-pxa2xx : fix spi init of WM510205 codec via ACPI (resend)
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [alsa-devel] Fwd: [PATCH 1/1] SPI : spi-pxa2xx : fix spi init of WM510205 codec via ACPI (resend)
  • From: Pierre-Louis Bossart <pierre-louis.bossart@xxxxxxxxxxxxxxx>
• Re: [PATCH] spi: Fix per-page mapping of unaligned vmalloc-ed buffer
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: spi: bcm2835: driver for "auxiliar" spi1/spi2
  • From: Jakub Kiciński <moorray3@xxxxx>
• [PATCH] spi: Fix per-page mapping of unaligned vmalloc-ed buffer
  • From: Andrew Gabbasov <andrew_gabbasov@xxxxxxxxxx>
• Re: [PATCH] spi: Fix per-page mapping of unaligned vmalloc-ed buffer
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: Fwd: [alsa-devel] [PATCH 1/1] SPI : spi-pxa2xx : fix spi init of WM510205 codec via ACPI (resend)
  • From: Charles Keepax <ckeepax@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• [PATCH] spi: Fix per-page mapping of unaligned vmalloc-ed buffer
  • From: Andrew Gabbasov <andrew_gabbasov@xxxxxxxxxx>
• RE: [PATCH] spi: Fix per-page mapping of unaligned vmalloc-ed buffer
  • From: "Gabbasov, Andrew" <Andrew_Gabbasov@xxxxxxxxxx>
• Re: Fwd: [alsa-devel] [PATCH 1/1] SPI : spi-pxa2xx : fix spi init of WM510205 codec via ACPI (resend)
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: Fwd: [alsa-devel] [PATCH 1/1] SPI : spi-pxa2xx : fix spi init of WM510205 codec via ACPI (resend)
  • From: Charles Keepax <ckeepax@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: Fwd: [alsa-devel] [PATCH 1/1] SPI : spi-pxa2xx : fix spi init of WM510205 codec via ACPI (resend)
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v2 2/2] spi: dw: Allow interface drivers to limit data I/O to word sizes
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH 1/2] spi: bcm2835: add spi-bcm2835aux driver for the auxiliar spi1 and spi2
  • From: Martin Sperl <kernel@xxxxxxxxxxxxxxxx>
• Re: Fwd: [alsa-devel] [PATCH 1/1] SPI : spi-pxa2xx : fix spi init of WM510205 codec via ACPI (resend)
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• Re: [PATCH] spi: Fix per-page mapping of unaligned vmalloc-ed buffer
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Fwd: [alsa-devel] [PATCH 1/1] SPI : spi-pxa2xx : fix spi init of WM510205 codec via ACPI (resend)
  • From: Christian Hartmann <cornogle@xxxxxxxxxxxxxx>
• [PATCH] spi: spidev: add compatible value for LTC2488
  • From: Jiri Prchal <jiri.prchal@xxxxxxxxxxx>
• RE: [PATCH] spi: Fix per-page mapping of unaligned vmalloc-ed buffer
  • From: Andrew Gabbasov <andrew_gabbasov@xxxxxxxxxx>
• Re: [PATCH 02/13] dmaengine: Introduce dma_request_slave_channel_compat_reason()
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• [PATCH V2] dt: brcm,bcm2835-aux-spi: add binding documentation for new spi-bcm2835aux
  • From: kernel@xxxxxxxxxxxxxxxx
• at91 spi problems
  • From: Jonas Andersson <jonas@xxxxxxxxxxx>
• Re: [patch] spi: zynq: missing break statement
  • From: Michal Simek <michal.simek@xxxxxxxxxx>
• [PATCH v2 2/2] spi: dw: Allow interface drivers to limit data I/O to word sizes
  • From: Michael van der Westhuizen <michael@xxxxxxxxxxxxxxxx>
• [PATCH v2 1/2] dt: snps,dw-apb-ssi: Document new I/O data register width property
  • From: Michael van der Westhuizen <michael@xxxxxxxxxxxxxxxx>
• [PATCH v2 0/2] spi: dw: Reintroduce optional 16 bit data register I/O
  • From: Michael van der Westhuizen <michael@xxxxxxxxxxxxxxxx>
• Re: [PATCH 02/13] dmaengine: Introduce dma_request_slave_channel_compat_reason()
  • From: Vinod Koul <vinod.koul@xxxxxxxxx>
• [patch] spi: zynq: missing break statement
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• Re: [PATCH 1/2] spi: dw: Allow interface drivers to limit data I/O to word sizes
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH 1/2] spi: rspi: Remove obsolete rspi-rz platform_device_id entry
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH 2/2] spi: rspi: Remove obsolete qspi platform_device_id entry
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH 1/2] spi: rspi: Remove obsolete rspi-rz platform_device_id entry
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH 2/2] spi: rspi: Remove obsolete qspi platform_device_id entry
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH 1/2] spi: rspi: Remove obsolete rspi-rz platform_device_id entry
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH] spi: sh-msiof: Remove obsolete spi_r8a779x_msiof platform_device_id entries
  • From: Simon Horman <horms@xxxxxxxxxxxx>
• Re: [PATCH 2/2] spi: rspi: Remove obsolete qspi platform_device_id entry
  • From: Simon Horman <horms@xxxxxxxxxxxx>
• Re: [PATCH 1/2] spi: rspi: Remove obsolete rspi-rz platform_device_id entry
  • From: Simon Horman <horms@xxxxxxxxxxxx>
• Re: [PATCH 04/11] mtd: ofpart: do not fail probe when no partitions exist
  • From: Brian Norris <computersforpeace@xxxxxxxxx>
• [PATCH 1/2] spi: rspi: Drop variable "error" in qspi_trigger_transfer_out_in()
  • From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
• [PATCH 2/2] spi: rspi: Make qspi_set_send_trigger() return "unsigned int"
  • From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
• [PATCH] spi: sh-msiof: Remove obsolete spi_r8a779x_msiof platform_device_id entries
  • From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
• [PATCH 2/2] spi: rspi: Remove obsolete qspi platform_device_id entry
  • From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
• [PATCH 1/2] spi: rspi: Remove obsolete rspi-rz platform_device_id entry
  • From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
• [GIT PULL] spi updates for v4.2
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH 2/2] dt: brcm, bcm2835-aux-spi: add binding documentation for new spi-bcm2835aux
  • From: Martin Sperl <kernel@xxxxxxxxxxxxxxxx>
• Re: [PATCH 2/2] dt: brcm, bcm2835-aux-spi: add binding documentation for new spi-bcm2835aux
  • From: Stefan Wahren <info@xxxxxxxxxxxxxx>
• Re: [PATCH 1/2] spi: bcm2835: add spi-bcm2835aux driver for the auxiliar spi1 and spi2
  • From: Martin Sperl <kernel@xxxxxxxxxxxxxxxx>
• Re: [PATCH] spi: img-spfi: fix support for speeds up to 1/4th input clock
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH 1/2] spi: bcm2835: add spi-bcm2835aux driver for the auxiliar spi1 and spi2
  • From: Jakub Kiciński <moorray3@xxxxx>
• Re: [PATCH 1/2] spi: bcm2835: add spi-bcm2835aux driver for the auxiliar spi1 and spi2
  • From: Noralf Trønnes <noralf@xxxxxxxxxxx>
• [PATCH 2/2] dt: brcm,bcm2835-aux-spi: add binding documentation for new spi-bcm2835aux
  • From: kernel@xxxxxxxxxxxxxxxx
• [PATCH 1/2] spi: bcm2835: add spi-bcm2835aux driver for the auxiliar spi1 and spi2
  • From: kernel@xxxxxxxxxxxxxxxx
• [PATCH] spi: add transfer histogram statistics via sysfs
  • From: kernel@xxxxxxxxxxxxxxxx
• [PATCH V2] spi: expose spi_master and spi_device statistics via sysfs
  • From: kernel@xxxxxxxxxxxxxxxx
• Re: [PATCH 02/13] dmaengine: Introduce dma_request_slave_channel_compat_reason()
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• Re: [PATCH] spi: expose spi_master and spi_device statistics via sysfs
  • From: Martin Sperl <kernel@xxxxxxxxxxxxxxxx>
• Re: [PATCH] spi: expose spi_master and spi_device statistics via sysfs
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• [PATCH] spi: zynqmp-gqspi: Remove executable permission
  • From: Axel Lin <axel.lin@xxxxxxxxxx>
• Re: [PATCH] spi: expose spi_master and spi_device statistics via sysfs
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH] spi: expose spi_master and spi_device statistics via sysfs
  • From: Martin Sperl <kernel@xxxxxxxxxxxxxxxx>
• Re: [PATCH] spi: expose spi_master and spi_device statistics via sysfs
  • From: Jakub Kiciński <moorray3@xxxxx>
• Re: [PATCH] spi: expose spi_master and spi_device statistics via sysfs
  • From: Jakub Kiciński <moorray3@xxxxx>
• Re: [PATCH] spi: expose spi_master and spi_device statistics via sysfs
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH] spi: expose spi_master and spi_device statistics via sysfs
  • From: Jakub Kiciński <moorray3@xxxxx>
• Re: [PATCH] spi: expose spi_master and spi_device statistics via sysfs
  • From: Jakub Kiciński <moorray3@xxxxx>
• [PATCH 1/2] spi: dw: Allow interface drivers to limit data I/O to word sizes
  • From: Michael van der Westhuizen <michael@xxxxxxxxxxxxxxxx>
• [PATCH 2/2] dt: snps,dw-apb-ssi: Describe 16 bit data register usage limitations
  • From: Michael van der Westhuizen <michael@xxxxxxxxxxxxxxxx>
• [PATCH 0/2] spi: dw: Reintroduce optional 16 bit data register I/O
  • From: Michael van der Westhuizen <michael@xxxxxxxxxxxxxxxx>
• Re: [PATCH] spi: expose spi_master and spi_device statistics via sysfs
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH] spi: expose spi_master and spi_device statistics via sysfs
  • From: Martin Sperl <kernel@xxxxxxxxxxxxxxxx>
• RE: [PATCH v3] spi: img-spfi: Same Edge bit set to double supported transfer speed
  • From: Sifan Naeem <Sifan.Naeem@xxxxxxxxxx>
• [PATCH] spi: img-spfi: fix support for speeds up to 1/4th input clock
  • From: Sifan Naeem <sifan.naeem@xxxxxxxxxx>
• [PATCH v2] spi: img-spfi: check for max speed supported by the spfi block
  • From: Sifan Naeem <sifan.naeem@xxxxxxxxxx>
• Re: [PATCH v2] spi: img-spfi: Same Edge bit set to double supported transfer speed
  • From: Jonas Gorski <jogo@xxxxxxxxxxx>
• Re: spi: bcm2835: driver for "auxiliar" spi1/spi2
  • From: Martin Sperl <kernel@xxxxxxxxxxxxxxxx>
• Re: spi: bcm2835: driver for "auxiliar" spi1/spi2
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: spi: bcm2835: driver for "auxiliar" spi1/spi2
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: spi: bcm2835: driver for "auxiliar" spi1/spi2
  • From: Noralf Trønnes <noralf@xxxxxxxxxxx>
• [PATCH] spi: img-spfi: check for max speed supported by the spfi block
  • From: Sifan Naeem <sifan.naeem@xxxxxxxxxx>
• spi: bcm2835: driver for "auxiliar" spi1/spi2
  • From: Martin Sperl <kernel@xxxxxxxxxxxxxxxx>
• Re: [PATCH 2/3] spi: mediatek: Add spi bus for Mediatek MT8173
  • From: Eddie Huang <eddie.huang@xxxxxxxxxxxx>
• Re: [PATCH 2/3] spi: mediatek: Add spi bus for Mediatek MT8173
  • From: Mark Brown <broonie@xxxxxxxxxx>
• RE: [PATCH v2] spi: img-spfi: Same Edge bit set to double supported transfer speed
  • From: Sifan Naeem <Sifan.Naeem@xxxxxxxxxx>