The patch fixes / extends the runtime PM handling. - Currently the driver instructs the SPI core to use auto-suspend but doesn't configure it. Add the necessary calls and let it autosuspend after probe. - In case the driver registration fails runtime PM needs to be properly disabled. Signed-off-by: Heiner Kallweit <hkallweit1@xxxxxxxxx> --- drivers/spi/spi-s3c64xx.c | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-) diff --git a/drivers/spi/spi-s3c64xx.c b/drivers/spi/spi-s3c64xx.c index c4d3b06..15a6de1 100644 --- a/drivers/spi/spi-s3c64xx.c +++ b/drivers/spi/spi-s3c64xx.c @@ -32,6 +32,7 @@ #define MAX_SPI_PORTS 6 #define S3C64XX_SPI_QUIRK_POLL (1 << 0) #define S3C64XX_SPI_QUIRK_CS_AUTO (1 << 1) +#define AUTOSUSPEND_TIMEOUT 2000 /* Registers and bit-fields */ @@ -1180,13 +1181,15 @@ static int s3c64xx_spi_probe(struct platform_device *pdev) S3C64XX_SPI_INT_TX_OVERRUN_EN | S3C64XX_SPI_INT_TX_UNDERRUN_EN, sdd->regs + S3C64XX_SPI_INT_EN); + pm_runtime_set_autosuspend_delay(dev, AUTOSUSPEND_TIMEOUT); + pm_runtime_use_autosuspend(dev); pm_runtime_set_active(dev); pm_runtime_enable(dev); ret = devm_spi_register_master(dev, master); if (ret != 0) { dev_err(dev, "cannot register SPI master: %d\n", ret); - goto err3; + goto err4; } dev_dbg(dev, "Samsung SoC SPI Driver loaded for Bus SPI-%d with %d Slaves attached\n", @@ -1195,8 +1198,14 @@ static int s3c64xx_spi_probe(struct platform_device *pdev) mem_res, (FIFO_LVL_MASK(sdd) >> 1) + 1, sdd->rx_dma.dmach, sdd->tx_dma.dmach); + pm_runtime_mark_last_busy(dev); + pm_runtime_autosuspend(dev); + return 0; +err4: + pm_runtime_disable(dev); + pm_runtime_set_suspended(dev); err3: clk_disable_unprepare(sdd->src_clk); err2: -- 2.5.0 -- To unsubscribe from this list: send the line "unsubscribe linux-spi" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html